[libvirt] [PATCH v4 08/20] backup: Introduce virDomainBackup APIs

Introduce a few more new public APIs related to incremental backups. This builds on the previous notion of a checkpoint (without an existing checkpoint, the new API is a full backup, differing only from virDomainCopy in the point of time chosen); and also allows creation of a new checkpoint at the same time as starting the backup (after all, an incremental backup is only useful if it covers the state since the previous backup). It also enhances event reporting for signaling when a push model backup completes (where the hypervisor creates the backup); note that the pull model does not have an event (starting the backup lets a third party access the data, and only the third party knows when it is finished). The full list of new API: virDomainBackupBegin; virDomainBackupEnd; virDomainBackupGetXMLDesc; Signed-off-by: Eric Blake <eblake(a)redhat.com&gt; --- include/libvirt/libvirt-domain-checkpoint.h | 21 ++ include/libvirt/libvirt-domain.h | 17 +- src/driver-hypervisor.h | 14 ++ src/qemu/qemu_blockjob.h | 1 + examples/object-events/event-test.c | 3 + src/conf/domain_conf.c | 2 +- src/libvirt-domain-checkpoint.c | 202 ++++++++++++++++++++ src/libvirt-domain.c | 8 +- src/libvirt_public.syms | 3 + tools/virsh-domain.c | 8 +- 10 files changed, 273 insertions(+), 6 deletions(-) diff --git a/include/libvirt/libvirt-domain-checkpoint.h b/include/libvirt/libvirt-domain-checkpoint.h index 9006a46c6e..6c3a85a1bf 100644 --- a/include/libvirt/libvirt-domain-checkpoint.h +++ b/include/libvirt/libvirt-domain-checkpoint.h @@ -152,4 +152,25 @@ int virDomainCheckpointDelete(virDomainCheckpointPtr checkpoint, int virDomainCheckpointRef(virDomainCheckpointPtr checkpoint); int virDomainCheckpointFree(virDomainCheckpointPtr checkpoint); +typedef enum { + VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA = (1 << 0), /* Make checkpoint without + remembering it */ + /* TODO: VIR_DOMAIN_BACKUP_BEGIN_QUIESCE */ +} virDomainBackupBeginFlags; + +/* Begin an incremental backup job, possibly creating a checkpoint. */ +int virDomainBackupBegin(virDomainPtr domain, const char *diskXml, + const char *checkpointXml, unsigned int flags); + +/* Learn about an ongoing backup job. */ +char *virDomainBackupGetXMLDesc(virDomainPtr domain, int id, + unsigned int flags); + +typedef enum { + VIR_DOMAIN_BACKUP_END_ABORT = (1 << 0), /* Abandon a push model backup */ +} virDomainBackupEndFlags; + +/* Complete (or abort) an incremental backup job. */ +int virDomainBackupEnd(virDomainPtr domain, int id, unsigned int flags); + #endif /* LIBVIRT_DOMAIN_CHECKPOINT_H */ diff --git a/include/libvirt/libvirt-domain.h b/include/libvirt/libvirt-domain.h index 0388911ded..cc23029c97 100644 --- a/include/libvirt/libvirt-domain.h +++ b/include/libvirt/libvirt-domain.h @@ -3,7 +3,7 @@ * Summary: APIs for management of domains * Description: Provides APIs for the management of domains * - * Copyright (C) 2006-2015 Red Hat, Inc. + * Copyright (C) 2006-2019 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -2394,6 +2394,9 @@ typedef enum { * exists as long as sync is active */ VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT = 4, + /* Backup (virDomainBackupBegin), job exists until virDomainBackupEnd */ + VIR_DOMAIN_BLOCK_JOB_TYPE_BACKUP = 5, + # ifdef VIR_ENUM_SENTINELS VIR_DOMAIN_BLOCK_JOB_TYPE_LAST # endif @@ -3215,6 +3218,7 @@ typedef enum { VIR_DOMAIN_JOB_OPERATION_SNAPSHOT = 6, VIR_DOMAIN_JOB_OPERATION_SNAPSHOT_REVERT = 7, VIR_DOMAIN_JOB_OPERATION_DUMP = 8, + VIR_DOMAIN_JOB_OPERATION_BACKUP = 9, # ifdef VIR_ENUM_SENTINELS VIR_DOMAIN_JOB_OPERATION_LAST @@ -3230,6 +3234,14 @@ typedef enum { */ # define VIR_DOMAIN_JOB_OPERATION "operation" +/** + * VIR_DOMAIN_JOB_ID: + * + * virDomainGetJobStats field: the id of the job (so far, only for jobs + * started by virDomainBackupBegin()), as VIR_TYPED_PARAM_INT. + */ +# define VIR_DOMAIN_JOB_ID "id" + /** * VIR_DOMAIN_JOB_TIME_ELAPSED: * @@ -4054,7 +4066,8 @@ typedef void (*virConnectDomainEventMigrationIterationCallback)(virConnectPtr co * @nparams: size of the params array * @opaque: application specific data * - * This callback occurs when a job (such as migration) running on the domain + * This callback occurs when a job (such as migration or push-model + * virDomainBackupBegin()) running on the domain * is completed. The params array will contain statistics of the just completed * job as virDomainGetJobStats would return. The callback must not free @params * (the array will be freed once the callback finishes). diff --git a/src/driver-hypervisor.h b/src/driver-hypervisor.h index 14db8e49f3..4e65b8ad36 100644 --- a/src/driver-hypervisor.h +++ b/src/driver-hypervisor.h @@ -1376,6 +1376,17 @@ typedef int (*virDrvDomainCheckpointDelete)(virDomainCheckpointPtr checkpoint, unsigned int flags); +typedef int +(*virDrvDomainBackupBegin)(virDomainPtr domain, const char *diskXml, + const char *checkpointXml, unsigned int flags); + +typedef char * +(*virDrvDomainBackupGetXMLDesc)(virDomainPtr domain, int id, + unsigned int flags); + +typedef int +(*virDrvDomainBackupEnd)(virDomainPtr domain, int id, unsigned int flags); + typedef struct _virHypervisorDriver virHypervisorDriver; typedef virHypervisorDriver *virHypervisorDriverPtr; @@ -1638,6 +1649,9 @@ struct _virHypervisorDriver { virDrvDomainCheckpointIsCurrent domainCheckpointIsCurrent; virDrvDomainCheckpointHasMetadata domainCheckpointHasMetadata; virDrvDomainCheckpointDelete domainCheckpointDelete; + virDrvDomainBackupBegin domainBackupBegin; + virDrvDomainBackupGetXMLDesc domainBackupGetXMLDesc; + virDrvDomainBackupEnd domainBackupEnd; }; diff --git a/src/qemu/qemu_blockjob.h b/src/qemu/qemu_blockjob.h index c7325c6daf..95f53dde16 100644 --- a/src/qemu/qemu_blockjob.h +++ b/src/qemu/qemu_blockjob.h @@ -55,6 +55,7 @@ typedef enum { QEMU_BLOCKJOB_TYPE_COPY = VIR_DOMAIN_BLOCK_JOB_TYPE_COPY, QEMU_BLOCKJOB_TYPE_COMMIT = VIR_DOMAIN_BLOCK_JOB_TYPE_COMMIT, QEMU_BLOCKJOB_TYPE_ACTIVE_COMMIT = VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT, + QEMU_BLOCKJOB_TYPE_BACKUP = VIR_DOMAIN_BLOCK_JOB_TYPE_BACKUP, /* Additional enum values local to qemu */ QEMU_BLOCKJOB_TYPE_INTERNAL, QEMU_BLOCKJOB_TYPE_LAST diff --git a/examples/object-events/event-test.c b/examples/object-events/event-test.c index fcf4492470..98337ad185 100644 --- a/examples/object-events/event-test.c +++ b/examples/object-events/event-test.c @@ -891,6 +891,9 @@ blockJobTypeToStr(int type) case VIR_DOMAIN_BLOCK_JOB_TYPE_ACTIVE_COMMIT: return "active layer block commit"; + + case VIR_DOMAIN_BLOCK_JOB_TYPE_BACKUP: + return "backup"; } return "unknown"; diff --git a/src/conf/domain_conf.c b/src/conf/domain_conf.c index 0221eb0634..fa3db9266f 100644 --- a/src/conf/domain_conf.c +++ b/src/conf/domain_conf.c @@ -1030,7 +1030,7 @@ VIR_ENUM_IMPL(virDomainHPTResizing, * <mirror> XML (remaining types are not two-phase). */ VIR_ENUM_DECL(virDomainBlockJob); VIR_ENUM_IMPL(virDomainBlockJob, VIR_DOMAIN_BLOCK_JOB_TYPE_LAST, - "", "", "copy", "", "active-commit", + "", "", "copy", "", "active-commit", "", ); VIR_ENUM_IMPL(virDomainMemoryModel, diff --git a/src/libvirt-domain-checkpoint.c b/src/libvirt-domain-checkpoint.c index 8a7b5b3c56..29cefe41f1 100644 --- a/src/libvirt-domain-checkpoint.c +++ b/src/libvirt-domain-checkpoint.c @@ -721,3 +721,205 @@ virDomainCheckpointFree(virDomainCheckpointPtr checkpoint) virObjectUnref(checkpoint); return 0; } + + +/** + * virDomainBackupBegin: + * @domain: a domain object + * @diskXml: description of storage to utilize and expose during + * the backup, or NULL + * @checkpointXml: description of a checkpoint to create, or NULL + * @flags: bitwise-OR of supported virDomainBackupBeginFlags + * + * Start a point-in-time backup job for the specified disks of a + * running domain. + * + * A backup job is mutually exclusive with domain migration + * (particularly when the job sets up an NBD export, since it is not + * possible to tell any NBD clients about a server migrating between + * hosts). For now, backup jobs are also mutually exclusive with any + * other block job on the same device, although this restriction may + * be lifted in a future release. Progress of the backup job can be + * tracked via virDomainGetJobStats(). The job remains active until a + * subsequent call to virDomainBackupEnd(), even if it no longer has + * anything to copy. + * + * This API differs from virDomainBlockCopy() in that it can grab the + * state of more than one disk in parallel, and the state is captured + * as of the start of the job, rather than the end. + * + * There are two fundamental backup approaches. The first, called a + * push model, instructs the hypervisor to copy the state of the guest + * disk to the designated storage destination (which may be on the + * local file system or a network device); in this mode, the + * hypervisor writes the content of the guest disk to the destination, + * then emits VIR_DOMAIN_EVENT_ID_JOB_COMPLETED when the backup is + * either complete or failed (the backup image is invalid if the job + * is ended prior to the event being emitted). The second, called a + * pull model, instructs the hypervisor to expose the state of the + * guest disk over an NBD export; a third-party client can then + * connect to this export, and read whichever portions of the disk it + * desires. In this mode, there is no event; libvirt has to be + * informed when the third-party NBD client is done and the backup + * resources can be released. + * + * The @diskXml parameter is optional but usually provided, and + * contains details about the backup, including which backup mode to + * use, whether the backup is incremental from a previous checkpoint, + * which disks participate in the backup, the destination for a push + * model backup, and the temporary storage and NBD server details for + * a pull model backup. If omitted, the backup attempts to default to + * a push mode full backup of all disks, where libvirt generates a + * filename for each disk by appending a suffix of a timestamp in + * seconds since the Epoch. virDomainBackupGetXMLDesc() can be called + * to learn actual values selected. For more information, see + * formatcheckpoint.html#BackupAttributes. + * + * The @checkpointXml parameter is optional; if non-NULL, then libvirt + * behaves as if virDomainCheckpointCreateXML() were called with + * @checkpointXml and the flag VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA + * forwarded appropriately, atomically covering the same guest state + * that will be part of the backup. The creation of a new checkpoint + * allows for future incremental backups. Note that some hypervisors + * may require a particular disk format, such as qcow2, in order to + * take advantage of checkpoints, while allowing arbitrary formats + * if checkpoints are not involved. + * + * Returns a non-negative job id on success, or negative on failure. + * This operation returns quickly, such that a user can choose to + * start a backup job between virDomainFSFreeze() and + * virDomainFSThaw() in order to create the backup while guest I/O is + * quiesced. + */ +/* FIXME: Do we need a specific API for listing all current backup + * jobs (which, at the moment, is at most one job), or is it better to + * refactor other existing job APIs in libvirt-domain.c to have job-id + * counterparts along with a generic listing of all jobs (with flags + * for filtering to specific job types)? + */ +int +virDomainBackupBegin(virDomainPtr domain, const char *diskXml, + const char *checkpointXml, unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(domain, "diskXml=%s, checkpointXml=%s, flags=0x%x", + NULLSTR(diskXml), NULLSTR(checkpointXml), flags); + + virResetLastError(); + + virCheckDomainReturn(domain, -1); + conn = domain->conn; + + virCheckReadOnlyGoto(conn->flags, error); + if (flags & VIR_DOMAIN_BACKUP_BEGIN_NO_METADATA) + virCheckNonNullArgGoto(checkpointXml, error); + + if (conn->driver->domainBackupBegin) { + int ret; + ret = conn->driver->domainBackupBegin(domain, diskXml, checkpointXml, + flags); + if (!ret) + goto error; + return ret; + } + + virReportUnsupportedError(); + error: + virDispatchError(conn); + return -1; +} + + +/** + * virDomainBackupGetXMLDesc: + * @domain: a domain object + * @id: the id of an active backup job previously started with + * virDomainBackupBegin() + * @flags: extra flags; not used yet, so callers should always pass 0 + * + * In some cases, a user can start a backup job without supplying all + * details, and rely on libvirt to fill in the rest (for example, + * selecting the port used for an NBD export). This API can then be + * used to learn what default values were chosen. + * + * Returns a NUL-terminated UTF-8 encoded XML instance, or NULL in + * case of error. The caller must free() the returned value. + */ +char * +virDomainBackupGetXMLDesc(virDomainPtr domain, int id, unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(domain, "id=%d, flags=0x%x", id, flags); + + virResetLastError(); + + virCheckDomainReturn(domain, NULL); + conn = domain->conn; + + virCheckNonNegativeArgGoto(id, error); + + if (conn->driver->domainBackupGetXMLDesc) { + char *ret; + ret = conn->driver->domainBackupGetXMLDesc(domain, id, flags); + if (!ret) + goto error; + return ret; + } + + virReportUnsupportedError(); + error: + virDispatchError(conn); + return NULL; +} + + +/** + * virDomainBackupEnd: + * @domain: a domain object + * @id: the id of an active backup job previously started with + * virDomainBackupBegin() + * @flags: bitwise-OR of supported virDomainBackupEndFlags + * + * Conclude a point-in-time backup job @id on the given domain. + * + * If the backup job uses the push model, but the event marking that + * all data has been copied has not yet been emitted, then the command + * fails unless @flags includes VIR_DOMAIN_BACKUP_END_ABORT. If the + * event has been issued, or if the backup uses the pull model, the + * flag has no effect. + * + * Returns 1 if the backup job completed successfully (the backup + * destination file in a push model is consistent), 0 if the job was + * aborted successfully (only when VIR_DOMAIN_BACKUP_END_ABORT is + * passed; the destination file is unusable), and -1 on failure. + */ +int +virDomainBackupEnd(virDomainPtr domain, int id, unsigned int flags) +{ + virConnectPtr conn; + + VIR_DOMAIN_DEBUG(domain, "id=%d, flags=0x%x", id, flags); + + virResetLastError(); + + virCheckDomainReturn(domain, -1); + conn = domain->conn; + + virCheckReadOnlyGoto(conn->flags, error); + virCheckNonNegativeArgGoto(id, error); + + if (conn->driver->domainBackupEnd) { + int ret; + ret = conn->driver->domainBackupEnd(domain, id, flags); + if (!ret) + goto error; + return ret; + } + + virReportUnsupportedError(); + error: + virDispatchError(conn); + return -1; +} diff --git a/src/libvirt-domain.c b/src/libvirt-domain.c index 58b4863c8f..a159b9d78c 100644 --- a/src/libvirt-domain.c +++ b/src/libvirt-domain.c @@ -1,7 +1,7 @@ /* * libvirt-domain.c: entry points for virDomainPtr APIs * - * Copyright (C) 2006-2015 Red Hat, Inc. + * Copyright (C) 2006-2018 Red Hat, Inc. * * This library is free software; you can redistribute it and/or * modify it under the terms of the GNU Lesser General Public @@ -10325,6 +10325,12 @@ virDomainBlockRebase(virDomainPtr dom, const char *disk, * over the destination format, the ability to copy to a destination that * is not a local file, and the possibility of additional tuning parameters. * + * The copy created by this API is not finalized until the job ends, + * and does not lend itself to incremental backups (beyond what + * VIR_DOMAIN_BLOCK_COPY_SHALLOW provides) nor to third-party control + * over the data being copied. For those features, use + * virDomainBackupBegin(). + * * Returns 0 if the operation has started, -1 on failure. */ int diff --git a/src/libvirt_public.syms b/src/libvirt_public.syms index 1b18402e5e..96858388d1 100644 --- a/src/libvirt_public.syms +++ b/src/libvirt_public.syms @@ -816,6 +816,9 @@ LIBVIRT_4.10.0 { LIBVIRT_5.1.0 { global: + virDomainBackupBegin; + virDomainBackupEnd; + virDomainBackupGetXMLDesc; virDomainCheckpointCreateXML; virDomainCheckpointCurrent; virDomainCheckpointDelete; diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c index 275ac0c318..68d7dc6df7 100644 --- a/tools/virsh-domain.c +++ b/tools/virsh-domain.c @@ -2561,7 +2561,9 @@ VIR_ENUM_IMPL(virshDomainBlockJob, N_("Block Pull"), N_("Block Copy"), N_("Block Commit"), - N_("Active Block Commit")); + N_("Active Block Commit"), + N_("Backup"), +); static const char * virshDomainBlockJobToString(int type) @@ -6064,7 +6066,9 @@ VIR_ENUM_IMPL(virshDomainJobOperation, N_("Outgoing migration"), N_("Snapshot"), N_("Snapshot revert"), - N_("Dump")); + N_("Dump"), + N_("Backup"), +); static const char * virshDomainJobOperationToString(int op) -- 2.20.1