On Sat, Nov 20, 2021 at 1:17 PM Yifei Jiang <jiangyifei(a)huawei.com> wrote:
Extend riscv_cpu_update_mip() to support setting external interrupt
by KVM. It will call kvm_riscv_set_irq() to change the IRQ state in
the KVM module When kvm is enabled and the MIP_SEIP bit is set in "mask"
In addition, bacause target/riscv/cpu_helper.c is used to TCG, so move
riscv_cpu_update_mip() to target/riscv/cpu.c from target/riscv/cpu_helper.c
Signed-off-by: Yifei Jiang <jiangyifei(a)huawei.com>
Signed-off-by: Mingwang Li <limingwang(a)huawei.com>
Reviewed-by: Alistair Francis <alistair.francis(a)wdc.com>
---
target/riscv/cpu.c | 34 ++++++++++++++++++++++++++++++++++
target/riscv/cpu_helper.c | 27 ---------------------------
target/riscv/kvm-stub.c | 5 +++++
target/riscv/kvm.c | 20 ++++++++++++++++++++
target/riscv/kvm_riscv.h | 1 +
5 files changed, 60 insertions(+), 27 deletions(-)
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index 1c944872a3..a464845c99 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -21,6 +21,7 @@
#include "qemu/qemu-print.h"
#include "qemu/ctype.h"
#include "qemu/log.h"
+#include "qemu/main-loop.h"
#include "cpu.h"
#include "internals.h"
#include "exec/exec-all.h"
@@ -131,6 +132,39 @@ static void set_feature(CPURISCVState *env, int feature)
env->features |= (1ULL << feature);
}
+#ifndef CONFIG_USER_ONLY
+uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value)
+{
+ CPURISCVState *env = &cpu->env;
+ CPUState *cs = CPU(cpu);
+ uint32_t old = env->mip;
+ bool locked = false;
+
+ if (!qemu_mutex_iothread_locked()) {
+ locked = true;
+ qemu_mutex_lock_iothread();
+ }
+
+ env->mip = (env->mip & ~mask) | (value & mask);
+
+ if (kvm_enabled() && (mask & MIP_SEIP)) {
+ kvm_riscv_set_irq(RISCV_CPU(cpu), IRQ_S_EXT, value & MIP_SEIP);
+ }
+
+ if (env->mip) {
+ cpu_interrupt(cs, CPU_INTERRUPT_HARD);
+ } else {
+ cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
+ }
+
+ if (locked) {
+ qemu_mutex_unlock_iothread();
+ }
+
+ return old;
+}
+#endif
+
We should not change riscv_cpu_update_mip() for injecting KVM interrupts
because this function touches the user-space state of MIP csr but for KVM
the SIP csr state is always in kernel-space.
Further, the KVM kernel-space ensures synchronization so we don't need
to do qemu_mutex_lock/unlock_iothread() for KVM interrupts.
I would suggest to extend riscv_cpu_set_irq() for KVM interrupts. When
KVM is enabled, the riscv_cpu_set_irq() should throw warning/abort for
any interrupt other than S-mode external interrupts.
Regards,
Anup
static void set_resetvec(CPURISCVState *env, target_ulong resetvec)
{
#ifndef CONFIG_USER_ONLY
diff --git a/target/riscv/cpu_helper.c b/target/riscv/cpu_helper.c
index 9eeed38c7e..5e36c35b15 100644
--- a/target/riscv/cpu_helper.c
+++ b/target/riscv/cpu_helper.c
@@ -286,33 +286,6 @@ int riscv_cpu_claim_interrupts(RISCVCPU *cpu, uint32_t interrupts)
}
}
-uint32_t riscv_cpu_update_mip(RISCVCPU *cpu, uint32_t mask, uint32_t value)
-{
- CPURISCVState *env = &cpu->env;
- CPUState *cs = CPU(cpu);
- uint32_t old = env->mip;
- bool locked = false;
-
- if (!qemu_mutex_iothread_locked()) {
- locked = true;
- qemu_mutex_lock_iothread();
- }
-
- env->mip = (env->mip & ~mask) | (value & mask);
-
- if (env->mip) {
- cpu_interrupt(cs, CPU_INTERRUPT_HARD);
- } else {
- cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
- }
-
- if (locked) {
- qemu_mutex_unlock_iothread();
- }
-
- return old;
-}
-
void riscv_cpu_set_rdtime_fn(CPURISCVState *env, uint64_t (*fn)(uint32_t),
uint32_t arg)
{
diff --git a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c
index 39b96fe3f4..4e8fc31a21 100644
--- a/target/riscv/kvm-stub.c
+++ b/target/riscv/kvm-stub.c
@@ -23,3 +23,8 @@ void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
{
abort();
}
+
+void kvm_riscv_set_irq(RISCVCPU *cpu, int irq, int level)
+{
+ abort();
+}
diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
index 7f3ffcc2b4..8da2648d1a 100644
--- a/target/riscv/kvm.c
+++ b/target/riscv/kvm.c
@@ -458,6 +458,26 @@ void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
env->satp = 0;
}
+void kvm_riscv_set_irq(RISCVCPU *cpu, int irq, int level)
+{
+ int ret;
+ unsigned virq = level ? KVM_INTERRUPT_SET : KVM_INTERRUPT_UNSET;
+
+ if (irq != IRQ_S_EXT) {
+ return;
+ }
+
+ if (!kvm_enabled()) {
+ return;
+ }
+
+ ret = kvm_vcpu_ioctl(CPU(cpu), KVM_INTERRUPT, &virq);
+ if (ret < 0) {
+ perror("Set irq failed");
+ abort();
+ }
+}
+
bool kvm_arch_cpu_check_are_resettable(void)
{
return true;
diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
index f38c82bf59..ed281bdce0 100644
--- a/target/riscv/kvm_riscv.h
+++ b/target/riscv/kvm_riscv.h
@@ -20,5 +20,6 @@
#define QEMU_KVM_RISCV_H
void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
+void kvm_riscv_set_irq(RISCVCPU *cpu, int irq, int level);
#endif
--
2.19.1
--
kvm-riscv mailing list
kvm-riscv(a)lists.infradead.org
http://lists.infradead.org/mailman/listinfo/kvm-riscv