2:20 a.m.
Historically libvirt hasn't differentiated between the name of a
loadable kernel module, and the name of the device driver that module
implements, but these two names can be (and usually are) at least
subtly different.
For example, the loadable module called "vfio_pci" implements a PCI
driver called "vfio-pci". We have always used the name "vfio-pci"
both
to load the module (with modprobe) and to check (in
/sys/bus/pci/drivers) if the driver is available. (This has happened
to work because modprobe "normalizes" all the names it is given by
replacing "-" with "_", so "vfio-pci" works for both loading
the
module and checking for the driver.)
When we recently gained the ability to manually specify the driver for
"virsh nodedev-detach", the fragility of this system became apparent -
if a user gave the "driver name" as "vfio_pci", then we would
modprobe
the module correctly, but then erroneously believe it hadn't been
loaded because /sys/bus/pci/drivers/vfio_pci didn't exist. For manual
specification of the driver name, we could deal with this by telling
the user "always use the correct name for the driver, don't assume
that it has the same name as the module", but it would still end up
confusing people, especially since some drivers do use underscore in
their name (e.g. the mlx5_vfio_pci driver/module).
This will only get worse when an upcoming patch starts automatically
determining the driver to use for VFIO-assigned devices - it will look
in the kernel's modules.alias file to find "best" VFIO variant
*module* for a device, and 3 out of 4 current examples of
vfio-pci/variant drivers have a mismatch between module name and
driver name, so the current code would end up properly loading the
module, but then erroneously think that the driver wasn't available.
This patch makes the code more forgiving by
1) checking for both $drivername and underscore($drivername) in
/sys/bus/pci/drivers
2) when we determine a module needs to be loaded, look at the link in
/sys/module/$modulename/driver/pci:$drivername to determine the
name of the driver we need to bind to the device(rather than just
assuming the driver has the same name as the module
Signed-off-by: Laine Stump <laine(a)redhat.com>
---
Change from V1: I tried to simplify the explanation in the commit log message
src/util/virpci.c | 193 +++++++++++++++++++++++++++++++++++++++-------
1 file changed, 163 insertions(+), 30 deletions(-)
diff --git a/src/util/virpci.c b/src/util/virpci.c
index afce7b52b7..f6bdf56057 100644
--- a/src/util/virpci.c
+++ b/src/util/virpci.c
@@ -222,6 +222,13 @@ virPCIDriverDir(const char *driver)
}
+static char *
+virPCIModuleDir(const char *module)
+{
+ return g_strdup_printf("/sys/module/%s", module);
+}
+
+
static char *
virPCIFile(const char *device, const char *file)
{
@@ -1154,44 +1161,166 @@ virPCIDeviceReset(virPCIDevice *dev,
}
+/**
+ * virPCINameDashToUnderscore:
+ * @path: the module/driver name or path - will be directly modified
+ *
+ * Replace all occurences of "-" with "_" in the name
+ * part of the path (everything after final "/"
+ *
+ * return true if any change was made, otherwise false.
+ */
static int
-virPCIProbeDriver(const char *driverName)
+virPCINameDashToUnderscore(char *path)
{
- g_autofree char *drvpath = NULL;
+ bool changed = false;
+ char *tmp = strrchr(path, '/');
+
+ if (!tmp)
+ tmp = path;
+
+ while (*tmp) {
+ if (*tmp == '-') {
+ *tmp = '_';
+ changed = true;
+ }
+ tmp++;
+ }
+
+ return changed;
+}
+
+
+static int
+virPCIProbeModule(const char *moduleName)
+{
+ g_autofree char *modulePath = NULL;
g_autofree char *errbuf = NULL;
- drvpath = virPCIDriverDir(driverName);
+ modulePath = virPCIModuleDir(moduleName);
/* driver previously loaded, return */
- if (virFileExists(drvpath))
+ if (virFileExists(modulePath))
return 0;
- if ((errbuf = virKModLoad(driverName))) {
- VIR_WARN("failed to load driver %s: %s", driverName, errbuf);
- goto cleanup;
+ if ((errbuf = virKModLoad(moduleName))) {
+ /* If we know failure was because of admin config, let's report that;
+ * otherwise, report a more generic failure message
+ */
+ if (virKModIsProhibited(moduleName)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Failed to load PCI driver module %1$s:
administratively prohibited"),
+ moduleName);
+ } else {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Failed to load PCI driver module %1$s: %2$s"),
+ moduleName, errbuf);
+ }
+ return -1;
}
/* driver loaded after probing */
- if (virFileExists(drvpath))
+ if (virFileExists(modulePath))
return 0;
- cleanup:
- /* If we know failure was because of admin config, let's report that;
- * otherwise, report a more generic failure message
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("modprobe reported success loading module '%1$s', but
module is missing from /sys/module"),
+ moduleName);
+ return -1;
+}
+
+/**
+ * virPCIDeviceFindDriver:
+ * @dev: initialized virPCIDevice, including desired stubDriverName
+ *
+ * Checks if there is a driver named @dev->stubDriverName already
+ * loaded. If there is, we're done. If not, look for a driver with
+ * that same name, except with dashes replaced with underscores.
+
+ * If neither of the above is found, then look for/load the module of
+ * the underscored version of the name, and follow the links from
+ * /sys/module/$name/drivers/pci:* to the PCI driver associated with that
+ * module, and update @dev->stubDriverName with that name.
+ *
+ * On a successful return, @dev->stubDriverName will be updated with
+ * the proper name for the driver, and that driver will be loaded.
+ *
+ * returns 0 on success, -1 on failure
+ */
+static int
+virPCIDeviceFindDriver(virPCIDevice *dev)
+{
+ g_autofree char *driverPath = virPCIDriverDir(dev->stubDriverName);
+ g_autofree char *moduleName = NULL;
+ g_autofree char *moduleDriversDir = NULL;
+ g_autoptr(DIR) dir = NULL;
+ struct dirent *ent;
+ int direrr;
+
+ /* unchanged stubDriverName */
+ if (virFileExists(driverPath))
+ return 0;
+
+ /* try replacing "-" with "_" */
+ if (virPCINameDashToUnderscore(driverPath) && virFileExists(driverPath)) {
+
+ /* update original name in dev */
+ virPCINameDashToUnderscore(dev->stubDriverName);
+ return 0;
+ }
+
+ /* look for a module with this name (but always replacing
+ * "-" with "_", since that's what modprobe does)
*/
- if (virKModIsProhibited(driverName)) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Failed to load PCI driver module %1$s: administratively
prohibited"),
- driverName);
- } else {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Failed to load PCI driver module %1$s"),
- driverName);
+
+ moduleName = g_strdup(dev->stubDriverName);
+ virPCINameDashToUnderscore(moduleName);
+
+ if (virPCIProbeModule(moduleName) < 0)
+ return -1;
+
+ /* module was found/loaded. Now find the PCI driver it implements,
+ * linked to by /sys/module/$moduleName/drivers/pci:$driverName
+ */
+
+ moduleDriversDir = g_strdup_printf("/sys/module/%s/drivers", moduleName);
+
+ if (virDirOpen(&dir, moduleDriversDir) < 0)
+ return -1;
+
+ while ((direrr = virDirRead(dir, &ent, moduleDriversDir))) {
+
+ if (STRPREFIX(ent->d_name, "pci:")) {
+ /* this is the link to the driver we want */
+
+ g_autofree char *drvName = NULL;
+ g_autofree char *drvPath = NULL;
+
+ /* extract the driver name from the link name */
+ drvName = g_strdup(ent->d_name + strlen("pci:"));
+
+ /* make sure that driver is actually loaded */
+ drvPath = virPCIDriverDir(drvName);
+ if (!virFileExists(drvPath)) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("pci driver '%1$s' supposedly loaded by
module '%2$s' not found in sysfs"),
+ drvName, moduleName);
+ return -1;
+ }
+
+ g_free(dev->stubDriverName);
+ dev->stubDriverName = g_steal_pointer(&drvName);
+ return 0;
+ }
}
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("module '%1$s' does not implement any pci
driver"),
+ moduleName);
return -1;
}
+
int
virPCIDeviceUnbind(virPCIDevice *dev)
{
@@ -1291,7 +1420,6 @@ virPCIDeviceUnbindFromStub(virPCIDevice *dev)
static int
virPCIDeviceBindToStub(virPCIDevice *dev)
{
- const char *stubDriverName = dev->stubDriverName;
g_autofree char *stubDriverPath = NULL;
g_autofree char *driverLink = NULL;
@@ -1303,30 +1431,35 @@ virPCIDeviceBindToStub(virPCIDevice *dev)
return -1;
}
- if (!stubDriverName
- && !(stubDriverName =
virPCIStubDriverTypeToString(dev->stubDriverType))) {
- virReportError(VIR_ERR_INTERNAL_ERROR,
- _("Unknown stub driver configured for PCI device
%1$s"),
- dev->name);
- return -1;
+ if (!dev->stubDriverName) {
+
+ const char *stubDriverName = NULL;
+
+ if (!(stubDriverName = virPCIStubDriverTypeToString(dev->stubDriverType))) {
+ virReportError(VIR_ERR_INTERNAL_ERROR,
+ _("Unknown stub driver configured for PCI device
%1$s"),
+ dev->name);
+ return -1;
+ }
+ dev->stubDriverName = g_strdup(stubDriverName);
}
- if (virPCIProbeDriver(stubDriverName) < 0)
+ if (virPCIDeviceFindDriver(dev) < 0)
return -1;
- stubDriverPath = virPCIDriverDir(stubDriverName);
+ stubDriverPath = virPCIDriverDir(dev->stubDriverName);
driverLink = virPCIFile(dev->name, "driver");
if (virFileExists(driverLink)) {
if (virFileLinkPointsTo(driverLink, stubDriverPath)) {
/* The device is already bound to the correct driver */
VIR_DEBUG("Device %s is already bound to %s",
- dev->name, stubDriverName);
+ dev->name, dev->stubDriverName);
return 0;
}
}
- if (virPCIDeviceBindWithDriverOverride(dev, stubDriverName) < 0)
+ if (virPCIDeviceBindWithDriverOverride(dev, dev->stubDriverName) < 0)
return -1;
dev->unbind_from_stub = true;
--
2.43.0