[libvirt] [PATCH v3 11/12] qemu: Validate PCI controllers (QEMU capabilities)

Signed-off-by: Andrea Bolognani <abologna(a)redhat.com&gt; --- src/qemu/qemu_domain.c | 190 ++++++++++++++++++++----------------------------- 1 file changed, 77 insertions(+), 113 deletions(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index ed41c90c2d..3bd80e7886 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -4249,11 +4249,8 @@ qemuDomainDeviceDefValidateControllerSCSI(const virDomainControllerDef *controll static int qemuDomainDeviceDefValidateControllerPCIOld(const virDomainControllerDef *controller, const virDomainDef *def, - virQEMUCapsPtr qemuCaps) + virQEMUCapsPtr qemuCaps ATTRIBUTE_UNUSED) { - virDomainControllerModelPCI model = controller->model; - const virDomainPCIControllerOpts *pciopts; - /* skip pcie-root */ if (controller->model == VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT) return 0; @@ -4264,119 +4261,50 @@ qemuDomainDeviceDefValidateControllerPCIOld(const virDomainControllerDef *contro controller->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT) return 0; - pciopts = &controller->opts.pciopts; - - /* Second pass - now the model specific checks */ - switch (model) { - case VIR_DOMAIN_CONTROLLER_MODEL_PCI_BRIDGE: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PCI_BRIDGE)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pci-bridge controller is not supported " - "in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCI_EXPANDER_BUS: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PXB)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pxb controller is not supported in this " - "QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_DMI_TO_PCI_BRIDGE: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the dmi-to-pci-bridge (i82801b11-bridge) " - "controller is not supported in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT_PORT: - if ((pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_IOH3420) && - !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_IOH3420)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pcie-root-port (ioh3420) controller " - "is not supported in this QEMU binary")); - return -1; - } - - if ((pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PCIE_ROOT_PORT) && - !virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PCIE_ROOT_PORT)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pcie-root-port (pcie-root-port) controller " - "is not supported in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_UPSTREAM_PORT: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_X3130_UPSTREAM)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pcie-switch-upstream-port (x3130-upstream) " - "controller is not supported in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_SWITCH_DOWNSTREAM_PORT: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("The pcie-switch-downstream-port " - "(xio3130-downstream) controller is not " - "supported in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_EXPANDER_BUS: - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_PXB_PCIE)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the pxb-pcie controller is not supported " - "in this QEMU binary")); - return -1; - } - - break; - - case VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT: - /* Skip the implicit one */ - if (pciopts->targetIndex == 0) - return 0; - - if (!virQEMUCapsGet(qemuCaps, QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the spapr-pci-host-bridge controller is not " - "supported in this QEMU binary")); - return -1; - } - - if (pciopts->numaNode != -1 && - !virQEMUCapsGet(qemuCaps, QEMU_CAPS_SPAPR_PCI_HOST_BRIDGE_NUMA_NODE)) { - virReportError(VIR_ERR_CONFIG_UNSUPPORTED, "%s", - _("the spapr-pci-host-bridge controller doesn't " - "support numa_node in this QEMU binary")); - return -1; - } + return 0; +} - break; - case VIR_DOMAIN_CONTROLLER_MODEL_PCIE_ROOT: - case VIR_DOMAIN_CONTROLLER_MODEL_PCI_LAST: - case VIR_DOMAIN_CONTROLLER_MODEL_PCI_DEFAULT: - break; +/** + * virDomainControllerPCIModelNameToQEMUCaps: + * @modelName: model name + * + * Maps model names for PCI controllers (virDomainControllerPCIModelName) + * to the QEMU capabilities required to use them (virQEMUCapsFlags). + * + * Returns: the QEMU capability itself (>0) on success; 0 if no QEMU + * capability is needed; <0 on error. + */ +static int +virDomainControllerPCIModelNameToQEMUCaps(int modelName) +{ + switch ((virDomainControllerPCIModelName) modelName) { + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PCI_BRIDGE: + return QEMU_CAPS_DEVICE_PCI_BRIDGE; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_I82801B11_BRIDGE: + return QEMU_CAPS_DEVICE_DMI_TO_PCI_BRIDGE; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_IOH3420: + return QEMU_CAPS_DEVICE_IOH3420; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_X3130_UPSTREAM: + return QEMU_CAPS_DEVICE_X3130_UPSTREAM; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_XIO3130_DOWNSTREAM: + return QEMU_CAPS_DEVICE_XIO3130_DOWNSTREAM; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PXB: + return QEMU_CAPS_DEVICE_PXB; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PXB_PCIE: + return QEMU_CAPS_DEVICE_PXB_PCIE; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_PCIE_ROOT_PORT: + return QEMU_CAPS_DEVICE_PCIE_ROOT_PORT; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_SPAPR_PCI_HOST_BRIDGE: + return QEMU_CAPS_DEVICE_SPAPR_PCI_HOST_BRIDGE; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_NONE: + return 0; + case VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_LAST: + default: + return 1; } - return 0; + return -1; } @@ -4389,6 +4317,7 @@ qemuDomainDeviceDefValidateControllerPCI(const virDomainControllerDef *cont, const virDomainPCIControllerOpts *pciopts = &cont->opts.pciopts; const char *model = virDomainControllerModelPCITypeToString(cont->model); const char *modelName = virDomainControllerPCIModelNameTypeToString(pciopts->modelName); + int cap = virDomainControllerPCIModelNameToQEMUCaps(pciopts->modelName); if (!model) { virReportError(VIR_ERR_INTERNAL_ERROR, @@ -4861,6 +4790,41 @@ qemuDomainDeviceDefValidateControllerPCI(const virDomainControllerDef *cont, return -1; } + /* The default PHB for pSeries guests doesn't need any QEMU capability + * to be used, so we should skip the capabilities check altogether */ + if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT && + pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_SPAPR_PCI_HOST_BRIDGE && + pciopts->targetIndex == 0) { + goto done; + } + + /* QEMU device availability */ + if (cap < 0) { + virReportError(VIR_ERR_INTERNAL_ERROR, + _("Unknown QEMU device for '%s' controller"), + modelName); + return -1; + } + if (cap > 0 && !virQEMUCapsGet(qemuCaps, cap)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("The '%s' device is not supported by this QEMU binary"), + modelName); + return -1; + } + + /* PHBs didn't support numaNode from the very beginning, so an extra + * capability check is required */ + if (cont->model == VIR_DOMAIN_CONTROLLER_MODEL_PCI_ROOT && + pciopts->modelName == VIR_DOMAIN_CONTROLLER_PCI_MODEL_NAME_SPAPR_PCI_HOST_BRIDGE && + pciopts->numaNode != -1 && + !virQEMUCapsGet(qemuCaps, QEMU_CAPS_SPAPR_PCI_HOST_BRIDGE_NUMA_NODE)) { + virReportError(VIR_ERR_CONFIG_UNSUPPORTED, + _("Option '%s' is not supported by '%s' device with this QEMU binary"), + "numaNode", modelName); + return -1; + } + + done: return qemuDomainDeviceDefValidateControllerPCIOld(cont, def, qemuCaps); } -- 2.14.3