On 11/7/20 10:41 AM, Hao Wang wrote:
Implement qemuDomainQueryDirtyRate which query domain's memory
dirty rate calling qmp "query-dirty-rate".
Signed-off-by: Hao Wang <wanghao232(a)huawei.com>
Signed-off-by: Zhou Yimin <zhouyimin(a)huawei.com>
Reviewed-by: Chuan Zheng <zhengchuan(a)huawei.com>
---
src/qemu/qemu_migration.c | 31 +++++++++++++++++++++++++++++++
src/qemu/qemu_migration.h | 5 +++++
src/qemu/qemu_monitor.c | 12 ++++++++++++
src/qemu/qemu_monitor.h | 4 ++++
src/qemu/qemu_monitor_json.c | 22 ++++++++++++++++++++++
src/qemu/qemu_monitor_json.h | 4 ++++
6 files changed, 78 insertions(+)
diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index 8029e24415..3d07ba3ac4 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -5864,3 +5864,34 @@ qemuDomainCalculateDirtyRate(virDomainPtr dom,
return ret;
}
+
+
+int
+qemuDomainQueryDirtyRate(virDomainPtr dom,
+ virDomainObjPtr vm,
+ virDomainDirtyRateInfoPtr info)
+{
+ virQEMUDriverPtr driver = dom->conn->privateData;
Again, driver is accessible from the caller, just pass it directly.
+ qemuDomainObjPrivatePtr priv;
+ int ret = -1;
+
+ if (!virDomainObjIsActive(vm)) {
+ virReportError(VIR_ERR_OPERATION_INVALID,
+ "%s", _("domain is not running"));
+ return ret;
+ }
+
+ priv = vm->privateData;
+
+ qemuDomainObjEnterMonitor(driver, vm);
+
+ ret = qemuMonitorQueryDirtyRate(priv->mon, info);
+ if (ret < 0) {
+ virReportError(VIR_ERR_OPERATION_FAILED,
+ "%s", _("get vm's dirty rate failed."));
No, this is not correct, qemuMonitorQueryDirtyRate() will report an
error if something goes wrong. And with pretty accurate error message.
This overwrites it with more generic one.
+ }
+ if (qemuDomainObjExitMonitor(driver, vm) < 0)
+ ret = -1;
+
+ return ret;
+}
diff --git a/src/qemu/qemu_migration.h b/src/qemu/qemu_migration.h
index 0522b375c0..8baae512b7 100644
--- a/src/qemu/qemu_migration.h
+++ b/src/qemu/qemu_migration.h
@@ -263,3 +263,8 @@ int
qemuDomainCalculateDirtyRate(virDomainPtr dom,
virDomainObjPtr vm,
long long sec);
+
+int
+qemuDomainQueryDirtyRate(virDomainPtr dom,
+ virDomainObjPtr vm,
+ virDomainDirtyRateInfoPtr info);
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 06603b8691..2fa6879467 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -4781,3 +4781,15 @@ qemuMonitorCalculateDirtyRate(qemuMonitorPtr mon,
return qemuMonitorJSONCalculateDirtyRate(mon, sec);
}
+
+
+int
+qemuMonitorQueryDirtyRate(qemuMonitorPtr mon,
+ virDomainDirtyRateInfoPtr info)
+{
+ VIR_DEBUG("info=%p", info);
+
+ QEMU_CHECK_MONITOR(mon);
+
+ return qemuMonitorJSONQueryDirtyRate(mon, info);
+}
diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h
index afb97780cf..25105c3ad9 100644
--- a/src/qemu/qemu_monitor.h
+++ b/src/qemu/qemu_monitor.h
@@ -1531,3 +1531,7 @@ qemuMonitorTransactionBackup(virJSONValuePtr actions,
int
qemuMonitorCalculateDirtyRate(qemuMonitorPtr mon,
long long sec);
+
+int
+qemuMonitorQueryDirtyRate(qemuMonitorPtr mon,
+ virDomainDirtyRateInfoPtr info);
diff --git a/src/qemu/qemu_monitor_json.c b/src/qemu/qemu_monitor_json.c
index 65691522fb..1924c7229b 100644
--- a/src/qemu/qemu_monitor_json.c
+++ b/src/qemu/qemu_monitor_json.c
@@ -9657,3 +9657,25 @@ qemuMonitorJSONCalculateDirtyRate(qemuMonitorPtr mon,
return 0;
}
+
+
+int
+qemuMonitorJSONQueryDirtyRate(qemuMonitorPtr mon,
+ virDomainDirtyRateInfoPtr info)
+{
+ g_autoptr(virJSONValue) cmd = NULL;
+ g_autoptr(virJSONValue) reply = NULL;
+
+ if (!(cmd = qemuMonitorJSONMakeCommand("query-dirty-rate", NULL)))
+ return -1;
+
+ if (qemuMonitorJSONCommand(mon, cmd, &reply) < 0)
+ return -1;
+
+ if (qemuMonitorJSONCheckError(cmd, reply) < 0)
+ return -1;
+
+ /* TODO: extract dirtyrate data from reply and store in virDomainDirtyRateInfoPtr */
How about instead of noting down to finish this, squash 5/7 here? It's
not like somebody could backport only this or that patch.
+ info->status = 0;
+ return 0;
+}
diff --git a/src/qemu/qemu_monitor_json.h b/src/qemu/qemu_monitor_json.h
index c9556fc19a..487f2e6e58 100644
--- a/src/qemu/qemu_monitor_json.h
+++ b/src/qemu/qemu_monitor_json.h
@@ -714,3 +714,7 @@ qemuMonitorJSONGetCPUMigratable(qemuMonitorPtr mon,
int
qemuMonitorJSONCalculateDirtyRate(qemuMonitorPtr mon,
long long sec);
+
+int
+qemuMonitorJSONQueryDirtyRate(qemuMonitorPtr mon,
+ virDomainDirtyRateInfoPtr info);
I think the following should be squashed in:
diff --git a/src/qemu/qemu_migration.c b/src/qemu/qemu_migration.c
index 5a253bbe2f..c0df2589da 100644
--- a/src/qemu/qemu_migration.c
+++ b/src/qemu/qemu_migration.c
@@ -5864,29 +5864,21 @@ qemuDomainCalculateDirtyRate(virQEMUDriverPtr
driver,
int
-qemuDomainQueryDirtyRate(virDomainPtr dom,
+qemuDomainQueryDirtyRate(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDirtyRateInfoPtr info)
{
- virQEMUDriverPtr driver = dom->conn->privateData;
- qemuDomainObjPrivatePtr priv;
- int ret = -1;
+ qemuDomainObjPrivatePtr priv = vm->privateData;
+ int ret;
if (!virDomainObjIsActive(vm)) {
virReportError(VIR_ERR_OPERATION_INVALID,
"%s", _("domain is not running"));
- return ret;
+ return -1;
}
- priv = vm->privateData;
-
qemuDomainObjEnterMonitor(driver, vm);
-
ret = qemuMonitorQueryDirtyRate(priv->mon, info);
- if (ret < 0) {
- virReportError(VIR_ERR_OPERATION_FAILED,
- "%s", _("get vm's dirty rate failed."));
- }
if (qemuDomainObjExitMonitor(driver, vm) < 0)
ret = -1;
diff --git a/src/qemu/qemu_migration.h b/src/qemu/qemu_migration.h
index f03bbaa3d9..c4be340ecb 100644
--- a/src/qemu/qemu_migration.h
+++ b/src/qemu/qemu_migration.h
@@ -265,6 +265,6 @@ qemuDomainCalculateDirtyRate(virQEMUDriverPtr driver,
long long sec);
int
-qemuDomainQueryDirtyRate(virDomainPtr dom,
+qemuDomainQueryDirtyRate(virQEMUDriverPtr driver,
virDomainObjPtr vm,
virDomainDirtyRateInfoPtr info);
Michal