4:55 p.m.
On 10/17/18 10:15 AM, Daniel P. Berrangé wrote:
MTTCG is the new multi-threaded impl of TCG which follows
KVM in having one host OS thread per vCPU. Historically
we have discarded all PIDs reported for TCG guests, but
we must now selectively honour this data.
We don't have anything in the domain XML that indicates
whether a guest is using TCG or MTTCG. While QEMU does
have an option (-accel tcg,thread=single|multi), it is
not desirable to expose this in libvirt. QEMU will
automatically use MTTCG when the host/guest architecture
pairing is known to be safe. Only developers of QEMU TCG
have a strong reason to override this logic.
Thus we use two sanity checks to decide if the vCPU
PID information is usable. First we see if the PID
duplicates the main emulator PID, and second we see
if the PID duplicates any other vCPUs.
Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com>
---
src/qemu/qemu_domain.c | 81 ++++++++++++++++++++++++++----------------
1 file changed, 51 insertions(+), 30 deletions(-)
diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c
index f00f1b3fdb..c7a0c03e3f 100644
--- a/src/qemu/qemu_domain.c
+++ b/src/qemu/qemu_domain.c
@@ -10326,9 +10326,10 @@ qemuDomainRefreshVcpuInfo(virQEMUDriverPtr driver,
qemuDomainVcpuPrivatePtr vcpupriv;
qemuMonitorCPUInfoPtr info = NULL;
size_t maxvcpus = virDomainDefGetVcpusMax(vm->def);
- size_t i;
+ size_t i, j;
bool hotplug;
bool fast;
+ bool validTIDs = true;
int rc;
int ret = -1;
@@ -10336,6 +10337,8 @@ qemuDomainRefreshVcpuInfo(virQEMUDriverPtr driver,
fast = virQEMUCapsGet(QEMU_DOMAIN_PRIVATE(vm)->qemuCaps,
QEMU_CAPS_QUERY_CPUS_FAST);
+ VIR_DEBUG("Maxvcpus %zu hotplug %d fast query %d", maxvcpus, hotplug,
fast);
+
if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0)
return -1;
@@ -10348,39 +10351,57 @@ qemuDomainRefreshVcpuInfo(virQEMUDriverPtr driver,
if (rc < 0)
goto cleanup;
+ /*
+ * The query-cpus[-fast] commands return information
+ * about the vCPUs, including the OS level PID that
+ * is executing the vCPU.
+ *
+ * For KVM there is always a 1-1 mapping between
+ * vCPUs and host OS PIDs.
+ *
+ * For TCG things are a little more complicated.
+ *
+ * - In some cases the vCPUs will all have the same
+ * PID as the main emulator thread.
+ * - In some cases the first vCPU will have a distinct
+ * PID, but other vCPUs will share the emulator thread
+ *
+ * For MTTCG, things work the same as KVM, with each
+ * vCPU getting its own PID.
+ *
+ * We use the Host OS PIDs for doing vCPU pinning
+ * and reporting. The TCG data reporting will result
+ * in bad behaviour such as pinning the wrong PID.
+ * We must thus detect and discard bogus PID info
+ * from TCG, while still honouring the modern MTTCG
+ * impl which we can support.
+ */
+ for (i = 0; i < maxvcpus && validTIDs; i++) {
+ if (info[i].tid == vm->pid) {
+ VIR_DEBUG("vCPU[%zu] PID %llu duplicates process",
+ i, (unsigned long long)info[i].tid);
+ validTIDs = false;
+ }
+
If !validTIDs does the next loop matter? IOW:
Should the above section add a "continue;" since the loop exit would
force the exit?
Beyond that the logic and comments look reasonable. I assume since
domain XML doesn't care whether MTTCG or TCG is used and things are
handled under the covers by QEMU that means there's no migration or
save/restore issues. Of course you have a much deeper understanding of
the QEMU code than I do!
The one other question I'd have is should validTIDs setting be done just
once and saved perhaps in the domain private block? There is more than 1
caller (and *Launch can call twice). It's not like it's going to change,
right? So doing the same loop from a hotplug path won't matter nor would
subsequent reconnects or attaches. So perhaps the validTIDs should be a
tristate that only needs to be checked when the value is UNKNOWN. It's
not like the loop is that expensive since it's only numeric comparisons,
so it doesn't matter. I suppose I can be easily convinced taking this
route would be fine, but figured I'd ask.
John
+ for (j = 0; j < i; j++) {
+ if (info[i].tid == info[j].tid) {
+ VIR_DEBUG("vCPU[%zu] PID %llu duplicates vCPU[%zu]",
+ i, (unsigned long long)info[i].tid, j);
+ validTIDs = false;
+ }
+ }
+
+ if (validTIDs)
+ VIR_DEBUG("vCPU[%zu] PID %llu is valid",
+ i, (unsigned long long)info[i].tid);
+ }
+
+ VIR_DEBUG("Extracting vCPU information validTIDs=%d", validTIDs);
for (i = 0; i < maxvcpus; i++) {
vcpu = virDomainDefGetVcpu(vm->def, i);
vcpupriv = QEMU_DOMAIN_VCPU_PRIVATE(vcpu);
- /*
- * Current QEMU *can* report info about host threads mapped
- * to vCPUs, but it is not in a manner we can correctly
- * deal with. The TCG CPU emulation does have a separate vCPU
- * thread, but it runs every vCPU in that same thread. So it
- * is impossible to setup different affinity per thread.
- *
- * What's more the 'query-cpus[-fast]' command returns bizarre
- * data for the threads. It gives the TCG thread for the
- * vCPU 0, but for vCPUs 1-> N, it actually replies with
- * the main process thread ID.
- *
- * The result is that when we try to set affinity for
- * vCPU 1, it will actually change the affinity of the
- * emulator thread :-( When you try to set affinity for
- * vCPUs 2, 3.... it will fail if the affinity was
- * different from vCPU 1.
- *
- * We *could* allow vcpu pinning with TCG, if we made the
- * restriction that all vCPUs had the same mask. This would
- * at least let us separate emulator from vCPUs threads, as
- * we do for KVM. It would need some changes to our cgroups
- * CPU layout though, and error reporting for the config
- * restrictions.
- *
- * Just disable CPU pinning with TCG until someone wants
- * to try to do this hard work.
- */
- if (vm->def->virtType != VIR_DOMAIN_VIRT_QEMU)
+ if (validTIDs)
vcpupriv->tid = info[i].tid;
vcpupriv->socket_id = info[i].socket_id;