8:01 a.m.
Many domain elements have "QEMU and KVM only" or "QEMU/KVM since
x.y.z"
remarks. Most of the elements work for HVF domain, so it makes sense to
add respective notices for HVF domain.
All the elements have been manually tested.
Signed-off-by: Roman Bolshakov <r.bolshakov(a)yadro.com>
---
docs/formatdomain.html.in | 133 ++++++++++++++++++++++----------------
1 file changed, 77 insertions(+), 56 deletions(-)
diff --git a/docs/formatdomain.html.in b/docs/formatdomain.html.in
index 25dd4bbbd6..b1a64c7c74 100644
--- a/docs/formatdomain.html.in
+++ b/docs/formatdomain.html.in
@@ -158,10 +158,10 @@
which is specified by absolute path,
used to assist the domain creation process. It is used by Xen
fully virtualized domains as well as setting the QEMU BIOS file
- path for QEMU/KVM domains. <span class="since">Xen since 0.1.0,
- QEMU/KVM since 0.9.12</span> Then, <span
class="since">since
- 1.2.8</span> it's possible for the element to have two
- optional attributes: <code>readonly</code> (accepted values are
+ path for QEMU/KVM/HVF domains. <span class="since">Xen since
0.1.0,
+ QEMU/KVM since 0.9.12, HVF since 4.10.0</span> Then, <span
+ class="since">since 1.2.8</span> it's possible for the
element to have
+ two optional attributes: <code>readonly</code> (accepted values are
<code>yes</code> and <code>no</code>) to reflect the fact
that the
image should be writable or read-only. The second attribute
<code>type</code> accepts values <code>rom</code> and
@@ -680,7 +680,7 @@
IOThreads are dedicated event loop threads for supported disk
devices to perform block I/O requests in order to improve
scalability especially on an SMP host/guest with many LUNs.
- <span class="since">Since 1.2.8 (QEMU only)</span>
+ <span class="since">QEMU/KVM since 1.2.8, HVF since
4.10.0</span>
</p>
<pre>
@@ -1603,12 +1603,13 @@
Both <code>host-model</code> and
<code>host-passthrough</code> modes
make sense when a domain can run directly on the host CPUs (for
- example, domains with type <code>kvm</code>). The actual host CPU is
- irrelevant for domains with emulated virtual CPUs (such as domains with
- type <code>qemu</code>). However, for backward compatibility
- <code>host-model</code> may be implemented even for domains running
on
- emulated CPUs in which case the best CPU the hypervisor is able to
- emulate may be used rather then trying to mimic the host CPU model.
+ example, domains with type <code>kvm</code> or
<code>hvf</code>). The
+ actual host CPU is irrelevant for domains with emulated virtual CPUs
+ (such as domains with type <code>qemu</code>). However, for backward
+ compatibility <code>host-model</code> may be implemented even for
+ domains running on emulated CPUs in which case the best CPU the
+ hypervisor is able to emulate may be used rather then trying to mimic
+ the host CPU model.
</dd>
<dt><code>model</code></dt>
@@ -1902,12 +1903,12 @@
</dl>
<p>
- QEMU/KVM supports the <code>on_poweroff</code> and
<code>on_reboot</code>
- events handling the <code>destroy</code> and
<code>restart</code> actions.
- The <code>preserve</code> action for an
<code>on_reboot</code> event
- is treated as a <code>destroy</code> and the
<code>rename-restart</code>
- action for an <code>on_poweroff</code> event is treated as a
- <code>restart</code> event.
+ QEMU/KVM/HVF domains support the <code>on_poweroff</code> and
+ <code>on_reboot</code> events handling the
<code>destroy</code> and
+ <code>restart</code> actions. The <code>preserve</code>
action for an
+ <code>on_reboot</code> event is treated as a
<code>destroy</code> and the
+ <code>rename-restart</code> action for an
<code>on_poweroff</code> event is
+ treated as a <code>restart</code> event.
</p>
<p>
@@ -2043,7 +2044,7 @@
to address more than 4 GB of memory.</dd>
<dt><code>acpi</code></dt>
<dd>ACPI is useful for power management, for example, with
- KVM guests it is required for graceful shutdown to work.
+ KVM or HVF guests it is required for graceful shutdown to work.
</dd>
<dt><code>apic</code></dt>
<dd>APIC allows the use of programmable IRQ
@@ -2286,7 +2287,8 @@
</dd>
<dt><code>vmcoreinfo</code></dt>
<dd>Enable QEMU vmcoreinfo device to let the guest kernel save debug
- details. <span class="since">Since 4.4.0</span> (QEMU
only)
+ details. <span class="since">QEMU/KVM since 4.4.0, HVF since
+ 4.10.0</span>
</dd>
<dt><code>htm</code></dt>
<dd>Configure HTM (Hardware Transational Memory) availability for
@@ -3559,7 +3561,7 @@
Copy-on-read avoids accessing the same backing file sectors
repeatedly and is useful when the backing file is over a slow
network. By default copy-on-read is off.
- <span class='since'>Since 0.9.10 (QEMU and KVM
only)</span>
+ <span class='since'>QEMU/KVM since 0.9.10, HVF since
4.10.0</span>
</li>
<li>
The optional <code>discard</code> attribute controls whether
@@ -3567,7 +3569,7 @@
ignored or passed to the filesystem. The value can be either
"unmap" (allow the discard request to be passed) or
"ignore"
(ignore the discard request).
- <span class='since'>Since 1.0.6 (QEMU and KVM
only)</span>
+ <span class='since'>QEMU/KVM since 1.0.6, HVF since
4.10.0</span>
</li>
<li>
The optional <code>detect_zeroes</code> attribute controls
whether
@@ -3723,7 +3725,7 @@
<dt><code>blockio</code></dt>
<dd>If present, the <code>blockio</code> element allows
to override any of the block device properties listed below.
- <span class="since">Since 0.10.2 (QEMU and KVM)</span>
+ <span class="since">QEMU/KVM since 0.10.2, HVF since
4.10.0</span>
<dl>
<dt><code>logical_block_size</code></dt>
<dd>The logical block size the disk will report to the guest
@@ -4157,14 +4159,14 @@
The optional <code>queues</code> attribute specifies the number of
queues for the controller. For best performance, it's recommended to
specify a value matching the number of vCPUs.
- <span class="since">Since 1.0.5 (QEMU and KVM only)</span>
+ <span class="since">QEMU/KVM since 1.0.5, HVF since
4.10.0</span>
</dd>
<dt><code>cmd_per_lun</code></dt>
<dd>
The optional <code>cmd_per_lun</code> attribute specifies the
maximum
number of commands that can be queued on devices controlled by the
host.
- <span class="since">Since 1.2.7 (QEMU and KVM only)</span>
+ <span class="since">QEMU/KVM since 1.2.7, HVF since
4.10.0</span>
</dd>
<dt><code>max_sectors</code></dt>
<dd>
@@ -4172,7 +4174,7 @@
amount of data in bytes that will be transferred to or from the device
in a single command. The transfer length is measured in sectors, where
a sector is 512 bytes.
- <span class="since">Since 1.2.7 (QEMU and KVM only)</span>
+ <span class="since">QEMU/KVM since 1.2.7, HVF since
4.10.0</span>
</dd>
<dt><code>ioeventfd</code></dt>
<dd>
@@ -4268,7 +4270,8 @@
<code>unit</code> attribute) the 64-bit PCI hole should be. Some guests
(like
Windows XP or Windows Server 2003) might crash when QEMU and Seabios
are recent enough to support 64-bit PCI holes, unless this is disabled
- (set to 0). <span class="since">Since 1.1.2 (QEMU
only)</span>
+ (set to 0). <span class="since">QEMU/KVM since 1.1.2, HVF since
+ 4.10.0</span>
</p>
<p>
PCI controllers also have an optional
@@ -4280,8 +4283,8 @@
model <b>attribute</b>. In almost all cases, you should not
manually add a <code><model></code> subelement to a
controller, nor should you modify one that is automatically
- generated by libvirt. <span class="since">Since 1.2.19 (QEMU
- only).</span>
+ generated by libvirt. <span class="since">QEMU/KVM since 1.2.19,
HVF
+ since 4.10.0</span>
</p>
<p>
PCI controllers also have an optional
@@ -4293,7 +4296,8 @@
should not manually add a <code><target></code>
subelement
to a controller, nor should you modify the values in the those
that are automatically generated by
- libvirt. <span class="since">Since 1.2.19 (QEMU
only).</span>
+ libvirt. <span class="since">QEMU/KVM since 1.2.19, HVF since
4.10.0
+ </span>
</p>
<dl>
<dt><code>chassisNr</code></dt>
@@ -5681,7 +5685,7 @@
<p>
The values for <code>type</code> aren't defined specifically by
libvirt, but by what the underlying hypervisor supports (if
- any). For QEMU and KVM you can get a list of supported models
+ any). For QEMU, KVM and HVF you can get a list of supported models
with these commands:
</p>
@@ -5691,7 +5695,7 @@ qemu-kvm -net nic,model=? /dev/null
</pre>
<p>
- Typical values for QEMU and KVM include:
+ Typical values for QEMU, KVM and HVF include:
ne2k_isa i82551 i82557b i82559er ne2k_pci pcnet rtl8139 e1000 virtio
</p>
@@ -5730,7 +5734,7 @@ qemu-kvm -net nic,model=? /dev/null
will be rejected. If this attribute is not present, then the
domain defaults to 'vhost' if present, but silently falls back
to 'qemu' without error.
- <span class="since">Since 0.8.8 (QEMU and KVM only)</span>
+ <span class="since">QEMU/KVM since 0.8.8, HVF since
4.10.0</span>
</dd>
<dd>
For interfaces of type='hostdev' (PCI passthrough devices)
@@ -5755,7 +5759,8 @@ qemu-kvm -net nic,model=? /dev/null
The <code>txmode</code> attribute specifies how to handle
transmission of packets when the transmit buffer is full. The
value can be either 'iothread' or 'timer'.
- <span class="since">Since 0.8.8 (QEMU and KVM
only)</span><br/><br/>
+ <span class="since">QEMU/KVM since 0.8.8, HVF since
4.10.0</span>
+ <br/><br/>
If set to 'iothread', packet tx is all done in an iothread in
the bottom half of the driver (this option translates into
@@ -5801,7 +5806,8 @@ qemu-kvm -net nic,model=? /dev/null
usually if the feature is supported, default is on. In case
there is a situation where this behavior is suboptimal, this
attribute provides a way to force the feature off.
- <span class="since">Since 0.9.5 (QEMU and KVM
only)</span><br/><br/>
+ <span class="since">QEMU/KVM since 0.9.5, HVF since
4.10.0</span>
+ <br/><br/>
<b>In general you should leave this option alone, unless you
are very certain you know what you are doing.</b>
@@ -5828,7 +5834,8 @@ qemu-kvm -net nic,model=? /dev/null
some restrictions on actual value. For instance, latest
QEMU (as of 2016-09-01) requires value to be a power of two
from [256, 1024] range.
- <span class="since">Since 2.3.0 (QEMU and KVM
only)</span><br/><br/>
+ <span class="since">QEMU/KVM since 2.3.0, HVF since
4.10.0</span>
+ <br/><br/>
<b>In general you should leave this option alone, unless you
are very certain you know what you are doing.</b>
@@ -5844,7 +5851,8 @@ qemu-kvm -net nic,model=? /dev/null
range. In addition to that, this may work only for a subset of
interface types, e.g. aforementioned QEMU enables this option
only for <code>vhostuser</code> type.
- <span class="since">Since 3.7.0 (QEMU and KVM
only)</span><br/><br/>
+ <span class="since">QEMU/KVM since 3.7.0, HVF since
4.10.0</span>
+ <br/><br/>
<b>In general you should leave this option alone, unless you
are very certain you know what you are doing.</b>
@@ -6748,7 +6756,10 @@ qemu-kvm -net nic,model=? /dev/null
of the first forward dev will be used.
</p>
</dd>
- <dt><code>socket</code> <span class="since">since
2.0.0 (QEMU only)</span></dt>
+ <dt>
+ <code>socket</code> <span class="since">QEMU/KVM
since 2.0.0, HVF
+ since 4.10.0</span>
+ </dt>
<dd>
<p>
This listen type tells a graphics server to listen on unix socket.
@@ -6764,7 +6775,10 @@ qemu-kvm -net nic,model=? /dev/null
attribute all <code>listen</code> elements are ignored.
</p>
</dd>
- <dt><code>none</code> <span class="since">since
2.0.0 (QEMU only)</span></dt>
+ <dt>
+ <code>none</code> <span class="since">QEMU/KVM since
2.0.0, HVF
+ since 4.10.0</span>
+ </dt>
<dd>
<p>
This listen type doesn't have any other attribute. Libvirt supports
@@ -6838,19 +6852,21 @@ qemu-kvm -net nic,model=? /dev/null
<p>
You can provide the amount of video memory in kibibytes (blocks of
1024 bytes) using <code>vram</code>. This is supported only for
guest
- type of "libxl", "vz", "qemu", "vbox",
"vmx" and "xen". If no
- value is provided the default is used. If the size is not a power of
- two it will be rounded to closest one.
+ type of "libxl", "vz", "qemu", "kvm",
"hvf", "vbox", "vmx" and "xen".
+ If no value is provided the default is used. If the size is not a
+ power of two it will be rounded to closest one.
</p>
<p>
The number of screen can be set using <code>heads</code>. This is
- supported only for guests type of "vz", "kvm",
"vbox" and "vmx".
+ supported only for guests type of "vz", "kvm",
"hvf", "vbox" and
+ "vmx".
</p>
<p>
- For guest type of "kvm" or "qemu" and model type
"qxl" there are
- optional attributes. Attribute <code>ram</code> (<span
class="since">
- since 1.0.2</span>) specifies the size of the primary bar, while the
- attribute <code>vram</code> specifies the secondary bar size.
+ For guest type of "kvm", "hvf" or "qemu" and
model type "qxl" there
+ are optional attributes. Attribute <code>ram</code> (<span
+ class="since"> since 1.0.2</span>) specifies the size of the
primary
+ bar, while the attribute <code>vram</code> specifies the secondary
bar
+ size.
If <code>ram</code> or <code>vram</code> are not
supplied a default
value is used. The <code>ram</code> should also be rounded to power
of
two as <code>vram</code>. There is also optional attribute
@@ -7735,7 +7751,7 @@ qemu-kvm -net nic,model=? /dev/null
<p>
A virtual hardware watchdog device can be added to the guest via
the <code>watchdog</code> element.
- <span class="since">Since 0.7.3, QEMU and KVM only</span>
+ <span class="since">QEMU/KVM since 0.7.3, HVF since
4.10.0</span>
</p>
<p>
@@ -7773,12 +7789,17 @@ qemu-kvm -net nic,model=? /dev/null
underlying hypervisor.
</p>
<p>
- QEMU and KVM support:
+ QEMU, KVM and HVF support:
</p>
<ul>
<li>'i6300esb' - the recommended device,
emulating a PCI Intel 6300ESB </li>
<li>'ib700' - emulating an ISA iBase IB700 </li>
+ </ul>
+ <p>
+ QEMU and KVM for s390/s390x support:
+ </p>
+ <ul>
<li>'diag288' - emulating an S390 DIAG288 device
<span class="since">Since 1.2.17</span></li>
</ul>
@@ -7791,7 +7812,7 @@ qemu-kvm -net nic,model=? /dev/null
specific to the underlying hypervisor.
</p>
<p>
- QEMU and KVM support:
+ QEMU, KVM and HVF support:
</p>
<ul>
<li>'reset' - default, forcefully reset the guest</li>
@@ -7823,14 +7844,14 @@ qemu-kvm -net nic,model=? /dev/null
<h4><a id="elementsMemBalloon">Memory balloon
device</a></h4>
<p>
- A virtual memory balloon device is added to all Xen and KVM/QEMU
+ A virtual memory balloon device is added to all Xen and QEMU/KVM/HVF
guests. It will be seen as <code>memballoon</code> element.
It will be automatically added when appropriate, so there is no
need to explicitly add this element in the guest XML unless a
specific PCI slot needs to be assigned.
- <span class="since">Since 0.8.3, Xen, QEMU and KVM
only</span>
- Additionally, <span class="since">since 0.8.4</span>, if the
- memballoon device needs to be explicitly disabled,
+ <span class="since">Xen, QEMU and KVM since 0.8.3, HVF since
+ 4.10.0</span> Additionally, <span class="since">since
0.8.4</span>, if
+ the memballoon device needs to be explicitly disabled,
<code>model='none'</code> may be used.
</p>
@@ -7867,7 +7888,7 @@ qemu-kvm -net nic,model=? /dev/null
the virtualization platform
</p>
<ul>
- <li>'virtio' - default with QEMU/KVM</li>
+ <li>'virtio' - default with QEMU/KVM/HVF</li>
<li>'xen' - default with Xen</li>
</ul>
</dd>
@@ -8148,7 +8169,7 @@ qemu-kvm -net nic,model=? /dev/null
<p>
panic device enables libvirt to receive panic notification from a QEMU
guest.
- <span class="since">Since 1.2.1, QEMU and KVM only</span>
+ <span class="since">QEMU/KVM since 1.2.1, HVF since
4.10.0</span>
</p>
<p>
This feature is always enabled for:
@@ -8816,7 +8837,7 @@ qemu-kvm -net nic,model=? /dev/null
<ul>
<li><a href="drvxen.html#xmlconfig">Xen
examples</a></li>
- <li><a href="drvqemu.html#xmlconfig">QEMU/KVM
examples</a></li>
+ <li><a href="drvqemu.html#xmlconfig">QEMU/KVM/HVF
examples</a></li>
</ul>
</body>
</html>
--
2.19.1