[libvirt] [v0.9.12-maint 07/11] qemu: Add support for -no-user-config

Thanks to this new option we are now able to use modern CPU models (such as Westmere) defined in external configuration file. The qemu-1.1{,-device} data files for qemuhelptest are filled in with qemu-1.1-rc2 output for now. I will update those files with real qemu-1.1 output once it is released. (cherry picked from commit 63b4243624b8fdabebaf5e6ec912095b2b5fdf5c) --- cfg.mk | 3 +- src/qemu/qemu_capabilities.c | 7 +- src/qemu/qemu_capabilities.h | 1 + src/qemu/qemu_command.c | 11 +- src/qemu/qemu_driver.c | 2 +- tests/qemuhelpdata/qemu-1.1 | 268 +++++++++++++++++++++++++++++++++++++ tests/qemuhelpdata/qemu-1.1-device | 160 ++++++++++++++++++++++ tests/qemuhelptest.c | 75 +++++++++++ 8 files changed, 519 insertions(+), 8 deletions(-) create mode 100644 tests/qemuhelpdata/qemu-1.1 create mode 100644 tests/qemuhelpdata/qemu-1.1-device diff --git a/cfg.mk b/cfg.mk index 9dab3c3..67141a9 100644 --- a/cfg.mk +++ b/cfg.mk @@ -823,7 +823,8 @@ exclude_file_name_regexp--sc_require_config_h = ^examples/ exclude_file_name_regexp--sc_require_config_h_first = ^examples/ -exclude_file_name_regexp--sc_trailing_blank = \.(fig|gif|ico|png)$$ +exclude_file_name_regexp--sc_trailing_blank = \ + (/qemuhelpdata/|\.(fig|gif|ico|png)$$) exclude_file_name_regexp--sc_unmarked_diagnostics = \ ^(docs/apibuild.py|tests/virt-aa-helper-test)$$ diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index 6e5165b..a3c87d1 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -161,6 +161,7 @@ VIR_ENUM_IMPL(qemuCaps, QEMU_CAPS_LAST, "block-job-async", "scsi-cd", "ide-cd", + "no-user-config", ); struct qemu_feature_flags { @@ -1082,6 +1083,8 @@ qemuCapsComputeCmdFlags(const char *help, } if (strstr(help, "-nodefconfig")) qemuCapsSet(flags, QEMU_CAPS_NODEFCONFIG); + if (strstr(help, "-no-user-config")) + qemuCapsSet(flags, QEMU_CAPS_NO_USER_CONFIG); /* The trailing ' ' is important to avoid a bogus match */ if (strstr(help, "-rtc ")) qemuCapsSet(flags, QEMU_CAPS_RTC); @@ -1634,7 +1637,9 @@ qemuCapsProbeCommand(const char *qemu, virCommandPtr cmd = virCommandNew(qemu); if (qemuCaps) { - if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG)) + if (qemuCapsGet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG)) + virCommandAddArg(cmd, "-no-user-config"); + else if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG)) virCommandAddArg(cmd, "-nodefconfig"); } diff --git a/src/qemu/qemu_capabilities.h b/src/qemu/qemu_capabilities.h index 7a6c5a0..0e0899e 100644 --- a/src/qemu/qemu_capabilities.h +++ b/src/qemu/qemu_capabilities.h @@ -129,6 +129,7 @@ enum qemuCapsFlags { QEMU_CAPS_BLOCKJOB_ASYNC = 91, /* qemu 1.1 block-job-cancel */ QEMU_CAPS_SCSI_CD = 92, /* -device scsi-cd */ QEMU_CAPS_IDE_CD = 93, /* -device ide-cd */ + QEMU_CAPS_NO_USER_CONFIG = 94, /* -no-user-config */ QEMU_CAPS_LAST, /* this must always be the last item */ }; diff --git a/src/qemu/qemu_command.c b/src/qemu/qemu_command.c index 117542f..8d14d41 100644 --- a/src/qemu/qemu_command.c +++ b/src/qemu/qemu_command.c @@ -4237,11 +4237,12 @@ qemuBuildCommandLine(virConnectPtr conn, virCommandAddArg(cmd, "-nographic"); if (qemuCapsGet(qemuCaps, QEMU_CAPS_DEVICE)) { - if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG)) - virCommandAddArg(cmd, - "-nodefconfig"); /* Disable global config files */ - virCommandAddArg(cmd, - "-nodefaults"); /* Disable default guest devices */ + /* Disable global config files and default devices */ + if (qemuCapsGet(qemuCaps, QEMU_CAPS_NO_USER_CONFIG)) + virCommandAddArg(cmd, "-no-user-config"); + else if (qemuCapsGet(qemuCaps, QEMU_CAPS_NODEFCONFIG)) + virCommandAddArg(cmd, "-nodefconfig"); + virCommandAddArg(cmd, "-nodefaults"); } /* Serial graphics adapter */ diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c index 385b861..0053ed1 100644 --- a/src/qemu/qemu_driver.c +++ b/src/qemu/qemu_driver.c @@ -4898,7 +4898,7 @@ qemudCanonicalizeMachineDirect(virDomainDefPtr def, char **canonical) int i, nmachines = 0; /* XXX we should be checking emulator capabilities and pass them instead - * of NULL so that -nodefconfig is properly added when + * of NULL so that -nodefconfig or -no-user-config is properly added when * probing machine types. Luckily, qemu does not support specifying new * machine types in its configuration files yet, which means passing this * additional parameter makes no difference now. diff --git a/tests/qemuhelpdata/qemu-1.1 b/tests/qemuhelpdata/qemu-1.1 new file mode 100644 index 0000000..79bc8ba --- /dev/null +++ b/tests/qemuhelpdata/qemu-1.1 @@ -0,0 +1,268 @@ +QEMU emulator version 1.0.92, Copyright (c) 2003-2008 Fabrice Bellard +usage: qemu-system-x86_64 [options] [disk_image] + +'disk_image' is a raw hard disk image for IDE hard disk 0 + +Standard options: +-h or -help display this help and exit +-version display version information and exit +-machine [type=]name[,prop[=value][,...]] + selects emulated machine (-machine ? for list) + property accel=accel1[:accel2[:...]] selects accelerator + supported accelerators are kvm, xen, tcg (default: tcg) + kernel_irqchip=on|off controls accelerated irqchip support + kvm_shadow_mem=size of KVM shadow MMU +-cpu cpu select CPU (-cpu ? for list) +-smp n[,maxcpus=cpus][,cores=cores][,threads=threads][,sockets=sockets] + set the number of CPUs to 'n' [default=1] + maxcpus= maximum number of total cpus, including + offline CPUs for hotplug, etc + cores= number of CPU cores on one socket + threads= number of threads on one CPU core + sockets= number of discrete sockets in the system +-numa node[,mem=size][,cpus=cpu[-cpu]][,nodeid=node] +-fda/-fdb file use 'file' as floppy disk 0/1 image +-hda/-hdb file use 'file' as IDE hard disk 0/1 image +-hdc/-hdd file use 'file' as IDE hard disk 2/3 image +-cdrom file use 'file' as IDE cdrom image (cdrom is ide1 master) +-drive [file=file][,if=type][,bus=n][,unit=m][,media=d][,index=i] + [,cyls=c,heads=h,secs=s[,trans=t]][,snapshot=on|off] + [,cache=writethrough|writeback|none|directsync|unsafe][,format=f] + [,serial=s][,addr=A][,id=name][,aio=threads|native] + [,readonly=on|off][,copy-on-read=on|off] + [[,bps=b]|[[,bps_rd=r][,bps_wr=w]]][[,iops=i]|[[,iops_rd=r][,iops_wr=w]] + use 'file' as a drive image +-set group.id.arg=value + set <arg> parameter for item <id> of type <group> + i.e. -set drive.$id.file=/path/to/image +-global driver.prop=value + set a global default for a driver property +-mtdblock file use 'file' as on-board Flash memory image +-sd file use 'file' as SecureDigital card image +-pflash file use 'file' as a parallel flash image +-boot [order=drives][,once=drives][,menu=on|off] + [,splash=sp_name][,splash-time=sp_time] + 'drives': floppy (a), hard disk (c), CD-ROM (d), network (n) + 'sp_name': the file's name that would be passed to bios as logo picture, if menu=on + 'sp_time': the period that splash picture last if menu=on, unit is ms +-snapshot write to temporary files instead of disk image files +-m megs set virtual RAM size to megs MB [default=128] +-mem-path FILE provide backing storage for guest RAM +-mem-prealloc preallocate guest memory (use with -mem-path) +-k language use keyboard layout (for example 'fr' for French) +-audio-help print list of audio drivers and their options +-soundhw c1,... enable audio support + and only specified sound cards (comma separated list) + use -soundhw ? to get the list of supported cards + use -soundhw all to enable all of them +-balloon none disable balloon device +-balloon virtio[,addr=str] + enable virtio balloon device (default) +-usb enable the USB driver (will be the default soon) +-usbdevice name add the host or guest USB device 'name' +-device driver[,prop[=value][,...]] + add device (based on driver) + prop=value,... sets driver properties + use -device ? to print all possible drivers + use -device driver,? to print all possible properties + +File system options: +-fsdev fsdriver,id=id[,path=path,][security_model={mapped-xattr|mapped-file|passthrough|none}] + [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd] + +Virtual File system pass-through options: +-virtfs local,path=path,mount_tag=tag,security_model=[mapped-xattr|mapped-file|passthrough|none] + [,writeout=immediate][,readonly][,socket=socket|sock_fd=sock_fd] +-virtfs_synth Create synthetic file system image + +-name string1[,process=string2] + set the name of the guest + string1 sets the window title and string2 the process name (on Linux) +-uuid %08x-%04x-%04x-%04x-%012x + specify machine UUID + +Display options: +-display sdl[,frame=on|off][,alt_grab=on|off][,ctrl_grab=on|off] + [,window_close=on|off]|curses|none| + vnc=<display>[,<optargs>] + select display type +-nographic disable graphical output and redirect serial I/Os to console +-curses use a curses/ncurses interface instead of SDL +-no-frame open SDL window without a frame and window decorations +-alt-grab use Ctrl-Alt-Shift to grab mouse (instead of Ctrl-Alt) +-ctrl-grab use Right-Ctrl to grab mouse (instead of Ctrl-Alt) +-no-quit disable SDL window close capability +-sdl enable SDL +-spice <args> enable spice +-portrait rotate graphical output 90 deg left (only PXA LCD) +-rotate <deg> rotate graphical output some deg left (only PXA LCD) +-vga [std|cirrus|vmware|qxl|xenfb|none] + select video card type +-full-screen start in full screen +-vnc display start a VNC server on display + +i386 target only: +-win2k-hack use it when installing Windows 2000 to avoid a disk full bug +-no-fd-bootchk disable boot signature checking for floppy disks +-no-acpi disable ACPI +-no-hpet disable HPET +-acpitable [sig=str][,rev=n][,oem_id=str][,oem_table_id=str][,oem_rev=n][,asl_compiler_id=str][,asl_compiler_rev=n][,{data|file}=file1[:file2]...] + ACPI table description +-smbios file=binary + load SMBIOS entry from binary file +-smbios type=0[,vendor=str][,version=str][,date=str][,release=%d.%d] + specify SMBIOS type 0 fields +-smbios type=1[,manufacturer=str][,product=str][,version=str][,serial=str] + [,uuid=uuid][,sku=str][,family=str] + specify SMBIOS type 1 fields + +Network options: +-net nic[,vlan=n][,macaddr=mac][,model=type][,name=str][,addr=str][,vectors=v] + create a new Network Interface Card and connect it to VLAN 'n' +-net user[,vlan=n][,name=str][,net=addr[/mask]][,host=addr][,restrict=on|off] + [,hostname=host][,dhcpstart=addr][,dns=addr][,tftp=dir][,bootfile=f] + [,hostfwd=rule][,guestfwd=rule][,smb=dir[,smbserver=addr]] + connect the user mode network stack to VLAN 'n', configure its + DHCP server and enabled optional services +-net tap[,vlan=n][,name=str][,fd=h][,ifname=name][,script=file][,downscript=dfile][,helper=helper][,sndbuf=nbytes][,vnet_hdr=on|off][,vhost=on|off][,vhostfd=h][,vhostforce=on|off] + connect the host TAP network interface to VLAN 'n' + use network scripts 'file' (default=/etc/qemu-ifup) + to configure it and 'dfile' (default=/etc/qemu-ifdown) + to deconfigure it + use '[down]script=no' to disable script execution + use network helper 'helper' (default=/usr/libexec/qemu-bridge-helper) to + configure it + use 'fd=h' to connect to an already opened TAP interface + use 'sndbuf=nbytes' to limit the size of the send buffer (the + default is disabled 'sndbuf=0' to enable flow control set 'sndbuf=1048576') + use vnet_hdr=off to avoid enabling the IFF_VNET_HDR tap flag + use vnet_hdr=on to make the lack of IFF_VNET_HDR support an error condition + use vhost=on to enable experimental in kernel accelerator + (only has effect for virtio guests which use MSIX) + use vhostforce=on to force vhost on for non-MSIX virtio guests + use 'vhostfd=h' to connect to an already opened vhost net device +-net bridge[,vlan=n][,name=str][,br=bridge][,helper=helper] + connects a host TAP network interface to a host bridge device 'br' + (default=br0) using the program 'helper' + (default=/usr/libexec/qemu-bridge-helper) +-net socket[,vlan=n][,name=str][,fd=h][,listen=[host]:port][,connect=host:port] + connect the vlan 'n' to another VLAN using a socket connection +-net socket[,vlan=n][,name=str][,fd=h][,mcast=maddr:port[,localaddr=addr]] + connect the vlan 'n' to multicast maddr and port + use 'localaddr=addr' to specify the host address to send packets from +-net socket[,vlan=n][,name=str][,fd=h][,udp=host:port][,localaddr=host:port] + connect the vlan 'n' to another VLAN using an UDP tunnel +-net dump[,vlan=n][,file=f][,len=n] + dump traffic on vlan 'n' to file 'f' (max n bytes per packet) +-net none use it alone to have zero network devices. If no -net option + is provided, the default is '-net nic -net user' +-netdev [user|tap|bridge|socket],id=str[,option][,option][,...] + +Character device options: +-chardev null,id=id[,mux=on|off] +-chardev socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay] + [,server][,nowait][,telnet][,mux=on|off] (tcp) +-chardev socket,id=id,path=path[,server][,nowait][,telnet],[mux=on|off] (unix) +-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr] + [,localport=localport][,ipv4][,ipv6][,mux=on|off] +-chardev msmouse,id=id[,mux=on|off] +-chardev vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]] + [,mux=on|off] +-chardev file,id=id,path=path[,mux=on|off] +-chardev pipe,id=id,path=path[,mux=on|off] +-chardev pty,id=id[,mux=on|off] +-chardev stdio,id=id[,mux=on|off][,signal=on|off] +-chardev tty,id=id,path=path[,mux=on|off] +-chardev parport,id=id,path=path[,mux=on|off] +-chardev spicevmc,id=id,name=name[,debug=debug] + +-iscsi [user=user][,password=password] + [,header-digest=CRC32C|CR32C-NONE|NONE-CRC32C|NONE + [,initiator-name=iqn] + iSCSI session parameters +Bluetooth(R) options: +-bt hci,null dumb bluetooth HCI - doesn't respond to commands +-bt hci,host[:id] + use host's HCI with the given name +-bt hci[,vlan=n] + emulate a standard HCI in virtual scatternet 'n' +-bt vhci[,vlan=n] + add host computer to virtual scatternet 'n' using VHCI +-bt device:dev[,vlan=n] + emulate a bluetooth device 'dev' in scatternet 'n' + +Linux/Multiboot boot specific: +-kernel bzImage use 'bzImage' as kernel image +-append cmdline use 'cmdline' as kernel command line +-initrd file use 'file' as initial ram disk +-dtb file use 'file' as device tree image + +Debug/Expert options: +-serial dev redirect the serial port to char device 'dev' +-parallel dev redirect the parallel port to char device 'dev' +-monitor dev redirect the monitor to char device 'dev' +-qmp dev like -monitor but opens in 'control' mode +-mon chardev=[name][,mode=readline|control][,default] +-debugcon dev redirect the debug console to char device 'dev' +-pidfile file write PID to 'file' +-singlestep always run in singlestep mode +-S freeze CPU at startup (use 'c' to start execution) +-gdb dev wait for gdb connection on 'dev' +-s shorthand for -gdb tcp::1234 +-d item1,... output log to /tmp/qemu.log (use -d ? for a list of log items) +-D logfile output log to logfile (instead of the default /tmp/qemu.log) +-hdachs c,h,s[,t] + force hard disk 0 physical geometry and the optional BIOS + translation (t=none or lba) (usually QEMU can guess them) +-L path set the directory for the BIOS, VGA BIOS and keymaps +-bios file set the filename for the BIOS +-enable-kvm enable KVM full virtualization support +-xen-domid id specify xen guest domain id +-xen-create create domain using xen hypercalls, bypassing xend + warning: should not be used when xend is in use +-xen-attach attach to existing xen domain + xend will use this when starting QEMU +-no-reboot exit instead of rebooting +-no-shutdown stop before shutdown +-loadvm [tag|id] + start right away with a saved state (loadvm in monitor) +-daemonize daemonize QEMU after initializing +-option-rom rom load a file, rom, into the option ROM space +-clock force the use of the given methods for timer alarm. + To see what timers are available use -clock ? +-rtc [base=utc|localtime|date][,clock=host|rt|vm][,driftfix=none|slew] + set the RTC base and clock, enable drift fix for clock ticks (x86 only) +-icount [N|auto] + enable virtual instruction counter with 2^N clock ticks per + instruction +-watchdog i6300esb|ib700 + enable virtual hardware watchdog [default=none] +-watchdog-action reset|shutdown|poweroff|pause|debug|none + action when watchdog fires [default=reset] +-echr chr set terminal escape character instead of ctrl-a +-virtioconsole c + set virtio console +-show-cursor show cursor +-tb-size n set TB size +-incoming p prepare for incoming migration, listen on port p +-nodefaults don't create default devices +-chroot dir chroot to dir just before starting the VM +-runas user change to user id user just before starting the VM +-readconfig <file> +-writeconfig <file> + read/write config file +-nodefconfig + do not load default config files at startup +-no-user-config + do not load user-provided config files at startup +-trace [events=<file>][,file=<file>] + specify tracing options +-qtest CHR specify tracing options +-qtest-log LOG specify tracing options + +During emulation, the following keys are useful: +ctrl-alt-f toggle full screen +ctrl-alt-n switch to virtual console 'n' +ctrl-alt toggle mouse and keyboard grab + +When using -nographic, press 'ctrl-a h' to get some help. diff --git a/tests/qemuhelpdata/qemu-1.1-device b/tests/qemuhelpdata/qemu-1.1-device new file mode 100644 index 0000000..64aacba --- /dev/null +++ b/tests/qemuhelpdata/qemu-1.1-device @@ -0,0 +1,160 @@ +name "usb-storage", bus USB +name "VGA", bus PCI +name "scsi-hd", bus SCSI, desc "virtual SCSI disk" +name "i82559a", bus PCI, desc "Intel i82559A Ethernet" +name "i82559b", bus PCI, desc "Intel i82559B Ethernet" +name "i82559c", bus PCI, desc "Intel i82559C Ethernet" +name "sysbus-ohci", bus System, desc "OHCI USB Controller" +name "virtio-blk-pci", bus PCI, alias "virtio-blk" +name "qxl-vga", bus PCI, desc "Spice QXL GPU (primary, vga compatible)" +name "x3130-upstream", bus PCI, desc "TI X3130 Upstream Port of PCI Express Switch" +name "ide-drive", bus IDE, desc "virtual IDE disk or CD-ROM (legacy)" +name "virtio-9p-pci", bus PCI +name "cirrus-vga", bus PCI, desc "Cirrus CLGD 54xx VGA" +name "ide-hd", bus IDE, desc "virtual IDE disk" +name "ES1370", bus PCI, desc "ENSONIQ AudioPCI ES1370" +name "ioh3420", bus PCI, desc "Intel IOH device id 3420 PCIE Root Port" +name "sga", bus ISA, desc "Serial Graphics Adapter" +name "scsi-block", bus SCSI, desc "SCSI block device passthrough" +name "usb-serial", bus USB +name "pc-sysfw", bus System, desc "PC System Firmware" +name "usb-mouse", bus USB +name "usb-net", bus USB +name "usb-hub", bus USB +name "ccid-card-emulated", bus ccid-bus, desc "emulated smartcard" +name "ne2k_isa", bus ISA +name "scsi-generic", bus SCSI, desc "pass through generic scsi device (/dev/sg*)" +name "pcnet", bus PCI +name "lsi53c895a", bus PCI, alias "lsi" +name "scsi-disk", bus SCSI, desc "virtual SCSI disk or CD-ROM (legacy)" +name "nec-usb-xhci", bus PCI +name "xio3130-downstream", bus PCI, desc "TI X3130 Downstream Port of PCI Express Switch" +name "pci-ohci", bus PCI, desc "Apple USB Controller" +name "virtserialport", bus virtio-serial-bus +name "hda-micro", bus HDA, desc "HDA Audio Codec, duplex (speaker, microphone)" +name "usb-braille", bus USB +name "scsi-cd", bus SCSI, desc "virtual SCSI CD-ROM" +name "usb-wacom-tablet", bus USB, desc "QEMU PenPartner Tablet" +name "isa-serial", bus ISA +name "i82550", bus PCI, desc "Intel i82550 Ethernet" +name "i82551", bus PCI, desc "Intel i82551 Ethernet" +name "isa-debugcon", bus ISA +name "ide-cd", bus IDE, desc "virtual IDE CD-ROM" +name "SUNW,fdtwo", bus System +name "ich9-usb-uhci1", bus PCI +name "ich9-usb-uhci2", bus PCI +name "ich9-usb-uhci3", bus PCI +name "isa-parallel", bus ISA +name "virtconsole", bus virtio-serial-bus +name "ne2k_pci", bus PCI +name "virtio-serial-pci", bus PCI, alias "virtio-serial" +name "hda-duplex", bus HDA, desc "HDA Audio Codec, duplex (line-out, line-in)" +name "intel-hda", bus PCI, desc "Intel HD Audio Controller" +name "i82559er", bus PCI, desc "Intel i82559ER Ethernet" +name "hda-output", bus HDA, desc "HDA Audio Codec, output-only (line-out)" +name "i82562", bus PCI, desc "Intel i82562 Ethernet" +name "sysbus-ahci", bus System +name "usb-ccid", bus USB, desc "CCID Rev 1.1 smartcard reader" +name "ivshmem", bus PCI +name "AC97", bus PCI, desc "Intel 82801AA AC97 Audio" +name "e1000", bus PCI, desc "Intel Gigabit Ethernet" +name "sysbus-fdc", bus System +name "usb-bt-dongle", bus USB +name "usb-tablet", bus USB +name "isa-vga", bus ISA +name "usb-kbd", bus USB +name "isa-applesmc", bus ISA +name "ib700", bus ISA +name "rtl8139", bus PCI +name "qxl", bus PCI, desc "Spice QXL GPU (secondary)" +name "i82557a", bus PCI, desc "Intel i82557A Ethernet" +name "i82557b", bus PCI, desc "Intel i82557B Ethernet" +name "i82557c", bus PCI, desc "Intel i82557C Ethernet" +name "usb-audio", bus USB +name "piix3-usb-uhci", bus PCI +name "piix4-usb-uhci", bus PCI +name "ccid-card-passthru", bus ccid-bus, desc "passthrough smartcard" +name "i82801", bus PCI, desc "Intel i82801 Ethernet" +name "smbus-eeprom", bus I2C +name "vmware-svga", bus PCI +name "isa-cirrus-vga", bus ISA +name "sb16", bus ISA, desc "Creative Sound Blaster 16" +name "pci-bridge", bus PCI, desc "Standard PCI Bridge" +name "usb-ehci", bus PCI +name "vt82c686b-usb-uhci", bus PCI +name "i82558a", bus PCI, desc "Intel i82558A Ethernet" +name "virtio-net-pci", bus PCI, alias "virtio-net" +name "virtio-balloon-pci", bus PCI, alias "virtio-balloon" +name "ich9-usb-ehci1", bus PCI +name "isa-ide", bus ISA +name "usb-host", bus USB +name "ich9-ahci", bus PCI, alias "ahci" +name "i6300esb", bus PCI +name "i82558b", bus PCI, desc "Intel i82558B Ethernet" +name "virtio-scsi-pci", bus PCI +virtio-blk-pci.class=hex32 +virtio-blk-pci.drive=drive +virtio-blk-pci.logical_block_size=blocksize +virtio-blk-pci.physical_block_size=blocksize +virtio-blk-pci.min_io_size=uint16 +virtio-blk-pci.opt_io_size=uint32 +virtio-blk-pci.bootindex=int32 +virtio-blk-pci.discard_granularity=uint32 +virtio-blk-pci.serial=string +virtio-blk-pci.ioeventfd=on/off +virtio-blk-pci.vectors=uint32 +virtio-blk-pci.indirect_desc=on/off +virtio-blk-pci.event_idx=on/off +virtio-blk-pci.scsi=on/off +virtio-blk-pci.addr=pci-devfn +virtio-blk-pci.romfile=string +virtio-blk-pci.rombar=uint32 +virtio-blk-pci.multifunction=on/off +virtio-blk-pci.command_serr_enable=on/off +virtio-net-pci.ioeventfd=on/off +virtio-net-pci.vectors=uint32 +virtio-net-pci.indirect_desc=on/off +virtio-net-pci.event_idx=on/off +virtio-net-pci.csum=on/off +virtio-net-pci.guest_csum=on/off +virtio-net-pci.gso=on/off +virtio-net-pci.guest_tso4=on/off +virtio-net-pci.guest_tso6=on/off +virtio-net-pci.guest_ecn=on/off +virtio-net-pci.guest_ufo=on/off +virtio-net-pci.host_tso4=on/off +virtio-net-pci.host_tso6=on/off +virtio-net-pci.host_ecn=on/off +virtio-net-pci.host_ufo=on/off +virtio-net-pci.mrg_rxbuf=on/off +virtio-net-pci.status=on/off +virtio-net-pci.ctrl_vq=on/off +virtio-net-pci.ctrl_rx=on/off +virtio-net-pci.ctrl_vlan=on/off +virtio-net-pci.ctrl_rx_extra=on/off +virtio-net-pci.mac=macaddr +virtio-net-pci.vlan=vlan +virtio-net-pci.netdev=netdev +virtio-net-pci.bootindex=int32 +virtio-net-pci.x-txtimer=uint32 +virtio-net-pci.x-txburst=int32 +virtio-net-pci.tx=string +virtio-net-pci.addr=pci-devfn +virtio-net-pci.romfile=string +virtio-net-pci.rombar=uint32 +virtio-net-pci.multifunction=on/off +virtio-net-pci.command_serr_enable=on/off +scsi-disk.drive=drive +scsi-disk.logical_block_size=blocksize +scsi-disk.physical_block_size=blocksize +scsi-disk.min_io_size=uint16 +scsi-disk.opt_io_size=uint32 +scsi-disk.bootindex=int32 +scsi-disk.discard_granularity=uint32 +scsi-disk.ver=string +scsi-disk.serial=string +scsi-disk.removable=on/off +scsi-disk.dpofua=on/off +scsi-disk.channel=uint32 +scsi-disk.scsi-id=uint32 +scsi-disk.lun=uint32 diff --git a/tests/qemuhelptest.c b/tests/qemuhelptest.c index d23b35a..57d1859 100644 --- a/tests/qemuhelptest.c +++ b/tests/qemuhelptest.c @@ -678,6 +678,81 @@ mymain(void) QEMU_CAPS_SCSI_BLOCK, QEMU_CAPS_SCSI_CD, QEMU_CAPS_IDE_CD); + DO_TEST("qemu-1.1", 1000092, 0, 0, + QEMU_CAPS_VNC_COLON, + QEMU_CAPS_NO_REBOOT, + QEMU_CAPS_DRIVE, + QEMU_CAPS_NAME, + QEMU_CAPS_UUID, + QEMU_CAPS_MIGRATE_QEMU_TCP, + QEMU_CAPS_MIGRATE_QEMU_EXEC, + QEMU_CAPS_DRIVE_CACHE_V2, + QEMU_CAPS_DRIVE_CACHE_UNSAFE, + QEMU_CAPS_DRIVE_FORMAT, + QEMU_CAPS_DRIVE_SERIAL, + QEMU_CAPS_XEN_DOMID, + QEMU_CAPS_DRIVE_READONLY, + QEMU_CAPS_VGA, + QEMU_CAPS_0_10, + QEMU_CAPS_MEM_PATH, + QEMU_CAPS_SDL, + QEMU_CAPS_MIGRATE_QEMU_UNIX, + QEMU_CAPS_CHARDEV, + QEMU_CAPS_ENABLE_KVM, + QEMU_CAPS_MONITOR_JSON, + QEMU_CAPS_BALLOON, + QEMU_CAPS_DEVICE, + QEMU_CAPS_SMP_TOPOLOGY, + QEMU_CAPS_NETDEV, + QEMU_CAPS_RTC, + QEMU_CAPS_VHOST_NET, + QEMU_CAPS_NO_HPET, + QEMU_CAPS_NODEFCONFIG, + QEMU_CAPS_BOOT_MENU, + QEMU_CAPS_FSDEV, + QEMU_CAPS_NAME_PROCESS, + QEMU_CAPS_SMBIOS_TYPE, + QEMU_CAPS_VGA_QXL, + QEMU_CAPS_SPICE, + QEMU_CAPS_VGA_NONE, + QEMU_CAPS_MIGRATE_QEMU_FD, + QEMU_CAPS_BOOTINDEX, + QEMU_CAPS_HDA_DUPLEX, + QEMU_CAPS_DRIVE_AIO, + QEMU_CAPS_CCID_EMULATED, + QEMU_CAPS_CCID_PASSTHRU, + QEMU_CAPS_CHARDEV_SPICEVMC, + QEMU_CAPS_VIRTIO_TX_ALG, + QEMU_CAPS_DEVICE_QXL_VGA, + QEMU_CAPS_PCI_MULTIFUNCTION, + QEMU_CAPS_VIRTIO_IOEVENTFD, + QEMU_CAPS_SGA, + QEMU_CAPS_VIRTIO_BLK_EVENT_IDX, + QEMU_CAPS_VIRTIO_NET_EVENT_IDX, + QEMU_CAPS_DRIVE_CACHE_DIRECTSYNC, + QEMU_CAPS_PIIX3_USB_UHCI, + QEMU_CAPS_PIIX4_USB_UHCI, + QEMU_CAPS_USB_EHCI, + QEMU_CAPS_ICH9_USB_EHCI1, + QEMU_CAPS_VT82C686B_USB_UHCI, + QEMU_CAPS_PCI_OHCI, + QEMU_CAPS_USB_HUB, + QEMU_CAPS_NO_SHUTDOWN, + QEMU_CAPS_PCI_ROMBAR, + QEMU_CAPS_ICH9_AHCI, + QEMU_CAPS_NO_ACPI, + QEMU_CAPS_FSDEV_READONLY, + QEMU_CAPS_VIRTIO_BLK_SCSI, + QEMU_CAPS_VIRTIO_BLK_SG_IO, + QEMU_CAPS_DRIVE_COPY_ON_READ, + QEMU_CAPS_CPU_HOST, + QEMU_CAPS_FSDEV_WRITEOUT, + QEMU_CAPS_DRIVE_IOTUNE, + QEMU_CAPS_SCSI_DISK_CHANNEL, + QEMU_CAPS_SCSI_BLOCK, + QEMU_CAPS_SCSI_CD, + QEMU_CAPS_IDE_CD, + QEMU_CAPS_NO_USER_CONFIG); return ret == 0 ? EXIT_SUCCESS : EXIT_FAILURE; } -- 1.8.4.rc3