Hello ChunYan,
Good to see your patchset into smaller pieces. This patch looks almost
OK for me, but there are problems you'll need to look into.
On Mon, 2014-02-17 at 14:32 +0800, Chunyan Liu wrote:
Add driver info to used_by, to avoid conflict among different drivers
if there
are more than one drivers existing and using the hostdev.
Signed-off-by: Chunyan Liu <cyliu(a)suse.com>
---
src/lxc/lxc_hostdev.c | 11 +++++++----
src/qemu/qemu_conf.h | 2 ++
src/qemu/qemu_driver.c | 8 ++++----
src/qemu/qemu_hostdev.c | 41 +++++++++++++++++++++++++----------------
src/util/virpci.c | 30 +++++++++++++++++++++++-------
src/util/virpci.h | 9 ++++++---
src/util/virscsi.c | 30 ++++++++++++++++++++++--------
src/util/virscsi.h | 7 +++++--
src/util/virusb.c | 29 ++++++++++++++++++++++-------
src/util/virusb.h | 8 ++++++--
tests/virscsitest.c | 6 +++---
11 files changed, 125 insertions(+), 56 deletions(-)
diff --git a/src/lxc/lxc_hostdev.c b/src/lxc/lxc_hostdev.c
index 3b371fc..77ce965 100644
--- a/src/lxc/lxc_hostdev.c
+++ b/src/lxc/lxc_hostdev.c
@@ -60,7 +60,7 @@ virLXCUpdateActiveUsbHostdevs(virLXCDriverPtr driver,
continue;
}
- virUSBDeviceSetUsedBy(usb, def->name);
+ virUSBDeviceSetUsedBy(usb, "QEMU", def->name);
You meant LXC_DRIVER_NAME rather than "QEMU" here, right?
virObjectLock(driver->activeUsbHostdevs);
if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) {
@@ -90,7 +90,9 @@ virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver,
for (i = 0; i < count; i++) {
virUSBDevicePtr usb = virUSBDeviceListGet(list, i);
if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) {
- const char *other_name = virUSBDeviceGetUsedBy(tmp);
+ const char *other_name = NULL;
+ const char *other_drvname = NULL;
+ virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_name);
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
@@ -103,7 +105,7 @@ virLXCPrepareHostdevUSBDevices(virLXCDriverPtr driver,
goto error;
}
- virUSBDeviceSetUsedBy(usb, name);
+ virUSBDeviceSetUsedBy(usb, "QEMU", name);
Same here, I guess that should be LXC_DRIVER_NAME, no?
VIR_DEBUG("Adding %03d.%03d dom=%s to
activeUsbHostdevs",
virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name);
/*
@@ -352,6 +354,7 @@ virLXCDomainReAttachHostUsbDevices(virLXCDriverPtr driver,
virDomainHostdevDefPtr hostdev = hostdevs[i];
virUSBDevicePtr usb, tmp;
const char *used_by = NULL;
+ const char *used_by_drvname = NULL;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
@@ -389,7 +392,7 @@ virLXCDomainReAttachHostUsbDevices(virLXCDriverPtr driver,
continue;
}
- used_by = virUSBDeviceGetUsedBy(tmp);
+ virUSBDeviceGetUsedBy(tmp, &used_by_drvname, &used_by);
Where is used_by_drvname used? If that really isn't used, then replacing
it by NULL would be fine.
if (STREQ_NULLABLE(used_by, name)) {
VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs",
hostdev->source.subsys.u.usb.bus,
diff --git a/src/qemu/qemu_conf.h b/src/qemu/qemu_conf.h
index 1f44a76..158cc1a 100644
--- a/src/qemu/qemu_conf.h
+++ b/src/qemu/qemu_conf.h
@@ -53,6 +53,8 @@
# error "Port me"
# endif
+# define QEMU_DRIVER_NAME "QEMU"
+
typedef struct _virQEMUDriver virQEMUDriver;
typedef virQEMUDriver *virQEMUDriverPtr;
diff --git a/src/qemu/qemu_driver.c b/src/qemu/qemu_driver.c
index 59e018d..1fe8992 100644
--- a/src/qemu/qemu_driver.c
+++ b/src/qemu/qemu_driver.c
@@ -97,8 +97,6 @@
#define VIR_FROM_THIS VIR_FROM_QEMU
-#define QEMU_DRIVER_NAME "QEMU"
-
#define QEMU_NB_MEM_PARAM 3
#define QEMU_NB_BLOCK_IO_TUNE_PARAM 6
@@ -11325,7 +11323,9 @@ qemuNodeDeviceReAttach(virNodeDevicePtr dev)
virObjectLock(driver->inactivePciHostdevs);
other = virPCIDeviceListFind(driver->activePciHostdevs, pci);
if (other) {
- const char *other_name = virPCIDeviceGetUsedBy(other);
+ const char *other_name = NULL;
+ const char *other_drvname = NULL;
+ virPCIDeviceGetUsedBy(other, &other_drvname, &other_name);
Is other_drvname used anywhere? Seems not from the patch, so using NULL
would surely be preferable.
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
@@ -16684,7 +16684,7 @@ static virDriver qemuDriver = {
static virStateDriver qemuStateDriver = {
- .name = "QEMU",
+ .name = QEMU_DRIVER_NAME,
.stateInitialize = qemuStateInitialize,
.stateAutoStart = qemuStateAutoStart,
.stateCleanup = qemuStateCleanup,
diff --git a/src/qemu/qemu_hostdev.c b/src/qemu/qemu_hostdev.c
index 1b16386..01c24f9 100644
--- a/src/qemu/qemu_hostdev.c
+++ b/src/qemu/qemu_hostdev.c
@@ -177,7 +177,7 @@ qemuUpdateActivePciHostdevs(virQEMUDriverPtr driver,
goto cleanup;
}
- virPCIDeviceSetUsedBy(dev, def->name);
+ virPCIDeviceSetUsedBy(dev, QEMU_DRIVER_NAME, def->name);
/* Setup the original states for the PCI device */
virPCIDeviceSetUnbindFromStub(dev,
hostdev->origstates.states.pci.unbind_from_stub);
@@ -230,7 +230,7 @@ qemuUpdateActiveUsbHostdevs(virQEMUDriverPtr driver,
continue;
}
- virUSBDeviceSetUsedBy(usb, def->name);
+ virUSBDeviceSetUsedBy(usb, QEMU_DRIVER_NAME, def->name);
if (virUSBDeviceListAdd(driver->activeUsbHostdevs, usb) < 0) {
virUSBDeviceFree(usb);
@@ -274,13 +274,13 @@ qemuUpdateActiveScsiHostdevs(virQEMUDriverPtr driver,
goto cleanup;
if ((tmp = virSCSIDeviceListFind(driver->activeScsiHostdevs, scsi))) {
- if (virSCSIDeviceSetUsedBy(tmp, def->name) < 0) {
+ if (virSCSIDeviceSetUsedBy(tmp, QEMU_DRIVER_NAME, def->name) < 0) {
virSCSIDeviceFree(scsi);
goto cleanup;
}
virSCSIDeviceFree(scsi);
} else {
- if (virSCSIDeviceSetUsedBy(scsi, def->name) < 0 ||
+ if (virSCSIDeviceSetUsedBy(scsi, QEMU_DRIVER_NAME, def->name) < 0 ||
virSCSIDeviceListAdd(driver->activeScsiHostdevs, scsi) < 0) {
virSCSIDeviceFree(scsi);
goto cleanup;
@@ -693,7 +693,9 @@ qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver,
* the dev is in list driver->activePciHostdevs.
*/
if ((other = virPCIDeviceListFind(driver->activePciHostdevs, dev))) {
- const char *other_name = virPCIDeviceGetUsedBy(other);
+ const char *other_name = NULL;
+ const char *other_drvname = NULL;
+ virPCIDeviceGetUsedBy(other, &other_drvname, &other_name);
Again, other_drvname seems to be unused.
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
@@ -766,7 +768,7 @@ qemuPrepareHostdevPCIDevices(virQEMUDriverPtr driver,
activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
if (activeDev)
- virPCIDeviceSetUsedBy(activeDev, name);
+ virPCIDeviceSetUsedBy(activeDev, QEMU_DRIVER_NAME, name);
}
/* Loop 8: Now set the original states for hostdev def */
@@ -857,7 +859,9 @@ qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver,
for (i = 0; i < count; i++) {
virUSBDevicePtr usb = virUSBDeviceListGet(list, i);
if ((tmp = virUSBDeviceListFind(driver->activeUsbHostdevs, usb))) {
- const char *other_name = virUSBDeviceGetUsedBy(tmp);
+ const char *other_name = NULL;
+ const char *other_drvname = NULL;
+ virUSBDeviceGetUsedBy(tmp, &other_drvname, &other_name);
Here too.
if (other_name)
virReportError(VIR_ERR_OPERATION_INVALID,
@@ -870,7 +874,7 @@ qemuPrepareHostdevUSBDevices(virQEMUDriverPtr driver,
goto error;
}
- virUSBDeviceSetUsedBy(usb, name);
+ virUSBDeviceSetUsedBy(usb, QEMU_DRIVER_NAME, name);
VIR_DEBUG("Adding %03d.%03d dom=%s to activeUsbHostdevs",
virUSBDeviceGetBus(usb), virUSBDeviceGetDevno(usb), name);
/*
@@ -1140,10 +1144,10 @@ qemuPrepareHostdevSCSIDevices(virQEMUDriverPtr driver,
goto error;
}
- if (virSCSIDeviceSetUsedBy(tmp, name) < 0)
+ if (virSCSIDeviceSetUsedBy(tmp, QEMU_DRIVER_NAME, name) < 0)
goto error;
} else {
- if (virSCSIDeviceSetUsedBy(scsi, name) < 0)
+ if (virSCSIDeviceSetUsedBy(scsi, QEMU_DRIVER_NAME, name) < 0)
goto error;
VIR_DEBUG("Adding %s to activeScsiHostdevs",
virSCSIDeviceGetName(scsi));
@@ -1275,10 +1279,14 @@ qemuDomainReAttachHostdevDevices(virQEMUDriverPtr driver,
* been used by this domain.
*/
activeDev = virPCIDeviceListFind(driver->activePciHostdevs, dev);
- if (activeDev &&
- STRNEQ_NULLABLE(name, virPCIDeviceGetUsedBy(activeDev))) {
- virPCIDeviceListDel(pcidevs, dev);
- continue;
+ if (activeDev) {
+ const char *tmp_name = NULL;
+ const char *tmp_drvname = NULL;
+ virPCIDeviceGetUsedBy(activeDev, &tmp_drvname, &tmp_name);
Is tmp_drvname actually used?
+ if (STRNEQ_NULLABLE(name, tmp_name)) {
+ virPCIDeviceListDel(pcidevs, dev);
+ continue;
+ }
}
virPCIDeviceListDel(driver->activePciHostdevs, dev);
@@ -1333,6 +1341,7 @@ qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver,
virDomainHostdevDefPtr hostdev = hostdevs[i];
virUSBDevicePtr usb, tmp;
const char *used_by = NULL;
+ const char *used_by_drvname = NULL;
if (hostdev->mode != VIR_DOMAIN_HOSTDEV_MODE_SUBSYS)
continue;
@@ -1370,7 +1379,7 @@ qemuDomainReAttachHostUsbDevices(virQEMUDriverPtr driver,
continue;
}
- used_by = virUSBDeviceGetUsedBy(tmp);
+ virUSBDeviceGetUsedBy(tmp, &used_by_drvname, &used_by);
Same here, used_by_drvname isn't used.
if (STREQ_NULLABLE(used_by, name)) {
VIR_DEBUG("Removing %03d.%03d dom=%s from activeUsbHostdevs",
hostdev->source.subsys.u.usb.bus,
@@ -1445,7 +1454,7 @@ qemuDomainReAttachHostScsiDevices(virQEMUDriverPtr driver,
hostdev->source.subsys.u.scsi.unit,
name);
- virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, name);
+ virSCSIDeviceListDel(driver->activeScsiHostdevs, tmp, QEMU_DRIVER_NAME,
name);
virSCSIDeviceFree(scsi);
}
virObjectUnlock(driver->activeScsiHostdevs);
diff --git a/src/util/virpci.c b/src/util/virpci.c
index 00d1064..4ea2bcf 100644
--- a/src/util/virpci.c
+++ b/src/util/virpci.c
@@ -59,7 +59,10 @@ struct _virPCIDevice {
char name[PCI_ADDR_LEN]; /* domain:bus:slot.function */
char id[PCI_ID_LEN]; /* product vendor */
char *path;
- const char *used_by; /* The domain which uses the device */
+
+ /* The driver:domain which uses the device */
+ char *used_by_drvname;
+ char *used_by_domname;
Why changing from const char* to char*?
unsigned int pcie_cap_pos;
unsigned int pci_pm_cap_pos;
@@ -1635,6 +1638,8 @@ virPCIDeviceFree(virPCIDevicePtr dev)
VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
VIR_FREE(dev->path);
VIR_FREE(dev->stubDriver);
+ VIR_FREE(dev->used_by_drvname);
+ VIR_FREE(dev->used_by_domname);
VIR_FREE(dev);
}
@@ -1704,16 +1709,27 @@ virPCIDeviceSetReprobe(virPCIDevicePtr dev, bool reprobe)
dev->reprobe = reprobe;
}
-void
-virPCIDeviceSetUsedBy(virPCIDevicePtr dev, const char *name)
+int
+virPCIDeviceSetUsedBy(virPCIDevicePtr dev,
+ const char *drv_name,
+ const char *dom_name)
{
- dev->used_by = name;
+ if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0)
+ return -1;
+ if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0)
+ return -1;
+
You will leak memory here if there was already a value set, You need to
free dev->used_by_drvname and dev->used_by_domname before VIR_STRDUP'ing
to them.
However, it would be much more convenient to keep const char*.
+ return 0;
}
-const char *
-virPCIDeviceGetUsedBy(virPCIDevicePtr dev)
+void
+virPCIDeviceGetUsedBy(virPCIDevicePtr dev,
+ const char **drv_name,
+ const char **dom_name)
{
- return dev->used_by;
+ *drv_name = dev->used_by_drvname;
+ *dom_name = dev->used_by_domname;
}
void virPCIDeviceReattachInit(virPCIDevicePtr pci)
diff --git a/src/util/virpci.h b/src/util/virpci.h
index ac6dae1..20ffe54 100644
--- a/src/util/virpci.h
+++ b/src/util/virpci.h
@@ -66,9 +66,12 @@ int virPCIDeviceSetStubDriver(virPCIDevicePtr dev,
const char *driver)
ATTRIBUTE_NONNULL(2);
const char *virPCIDeviceGetStubDriver(virPCIDevicePtr dev);
-void virPCIDeviceSetUsedBy(virPCIDevice *dev,
- const char *used_by);
-const char *virPCIDeviceGetUsedBy(virPCIDevice *dev);
+int virPCIDeviceSetUsedBy(virPCIDevice *dev,
+ const char *drv_name,
+ const char *dom_name);
+void virPCIDeviceGetUsedBy(virPCIDevice *dev,
+ const char **drv_name,
+ const char **dom_name);
unsigned int virPCIDeviceGetUnbindFromStub(virPCIDevicePtr dev);
void virPCIDeviceSetUnbindFromStub(virPCIDevice *dev,
bool unbind);
diff --git a/src/util/virscsi.c b/src/util/virscsi.c
index acc3815..5e28328 100644
--- a/src/util/virscsi.c
+++ b/src/util/virscsi.c
@@ -47,6 +47,11 @@
/* For virReportOOMError() and virReportSystemError() */
#define VIR_FROM_THIS VIR_FROM_NONE
+struct _virUsedByInfo {
+ char *drvname; /* which driver */
+ char *domname; /* which domain */
+};
+typedef struct _virUsedByInfo *virUsedByInfoPtr;
struct _virSCSIDevice {
unsigned int adapter;
@@ -57,7 +62,7 @@ struct _virSCSIDevice {
char *name; /* adapter:bus:target:unit */
char *id; /* model:vendor */
char *sg_path; /* e.g. /dev/sg2 */
- char **used_by; /* name of the domains using this dev */
+ virUsedByInfoPtr *used_by; /* driver:domain(s) using this dev */
size_t n_used_by; /* how many domains are using this dev */
bool readonly;
@@ -274,19 +279,26 @@ virSCSIDeviceFree(virSCSIDevicePtr dev)
VIR_FREE(dev->id);
VIR_FREE(dev->name);
VIR_FREE(dev->sg_path);
- for (i = 0; i < dev->n_used_by; i++)
+ for (i = 0; i < dev->n_used_by; i++) {
+ VIR_FREE(dev->used_by[i]->drvname);
+ VIR_FREE(dev->used_by[i]->domname);
VIR_FREE(dev->used_by[i]);
+ }
VIR_FREE(dev->used_by);
VIR_FREE(dev);
}
int
virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
- const char *name)
+ const char *drvname,
+ const char *domname)
{
- char *copy = NULL;
-
- if (VIR_STRDUP(copy, name) < 0)
+ virUsedByInfoPtr copy;
+ if (VIR_ALLOC(copy) < 0)
+ return -1;
+ if (VIR_STRDUP(copy->drvname, drvname) < 0)
+ return -1;
+ if (VIR_STRDUP(copy->domname, domname) < 0)
return -1;
return VIR_APPEND_ELEMENT(dev->used_by, dev->n_used_by, copy);
@@ -427,13 +439,15 @@ virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
void
virSCSIDeviceListDel(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev,
- const char *name)
+ const char *drvname,
+ const char *domname)
{
virSCSIDevicePtr tmp = NULL;
size_t i;
for (i = 0; i < dev->n_used_by; i++) {
- if (STREQ_NULLABLE(dev->used_by[i], name)) {
+ if (STREQ_NULLABLE(dev->used_by[i]->drvname, drvname) &&
+ STREQ_NULLABLE(dev->used_by[i]->domname, domname)) {
if (dev->n_used_by > 1) {
VIR_DELETE_ELEMENT(dev->used_by, i, dev->n_used_by);
I'ld say that doesn't free everything. You'll need to VIR_FREE the
dev->drvname and dev->domname before.
} else {
diff --git a/src/util/virscsi.h b/src/util/virscsi.h
index 1b685eb..c67837f 100644
--- a/src/util/virscsi.h
+++ b/src/util/virscsi.h
@@ -53,7 +53,9 @@ virSCSIDevicePtr virSCSIDeviceNew(const char *sysfs_prefix,
bool shareable);
void virSCSIDeviceFree(virSCSIDevicePtr dev);
-int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev, const char *name);
+int virSCSIDeviceSetUsedBy(virSCSIDevicePtr dev,
+ const char *drvname,
+ const char *domname);
bool virSCSIDeviceIsAvailable(virSCSIDevicePtr dev);
const char *virSCSIDeviceGetName(virSCSIDevicePtr dev);
unsigned int virSCSIDeviceGetAdapter(virSCSIDevicePtr dev);
@@ -87,7 +89,8 @@ virSCSIDevicePtr virSCSIDeviceListSteal(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
void virSCSIDeviceListDel(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev,
- const char *name);
+ const char *drvname,
+ const char *domname);
virSCSIDevicePtr virSCSIDeviceListFind(virSCSIDeviceListPtr list,
virSCSIDevicePtr dev);
diff --git a/src/util/virusb.c b/src/util/virusb.c
index bb5980d..4e22973 100644
--- a/src/util/virusb.c
+++ b/src/util/virusb.c
@@ -55,7 +55,10 @@ struct _virUSBDevice {
char name[USB_ADDR_LEN]; /* domain:bus:slot.function */
char id[USB_ID_LEN]; /* product vendor */
char *path;
- const char *used_by; /* name of the domain using this dev */
+
+ /* driver:domain using this dev */
+ char *used_by_drvname;
+ char *used_by_domname;
};
Again, why changing from const char* to char*? It will mostly lead to
memory handling troubles.
struct _virUSBDeviceList {
@@ -375,19 +378,31 @@ virUSBDeviceFree(virUSBDevicePtr dev)
return;
VIR_DEBUG("%s %s: freeing", dev->id, dev->name);
VIR_FREE(dev->path);
+ VIR_FREE(dev->used_by_drvname);
+ VIR_FREE(dev->used_by_domname);
VIR_FREE(dev);
}
-
-void virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
- const char *name)
+int
+virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
+ const char *drv_name,
+ const char *dom_name)
{
- dev->used_by = name;
+ if (VIR_STRDUP(dev->used_by_drvname, drv_name) < 0)
+ return -1;
+ if (VIR_STRDUP(dev->used_by_domname, dom_name) < 0)
+ return -1;
What if there was already values set? There would be a memory leak:
either use const char* or VIR_FREE before the VIR_STRDUP.
+
+ return 0;
}
-const char * virUSBDeviceGetUsedBy(virUSBDevicePtr dev)
+void
+virUSBDeviceGetUsedBy(virUSBDevicePtr dev,
+ const char **drv_name,
+ const char **dom_name)
{
- return dev->used_by;
+ *drv_name = dev->used_by_drvname;
+ *dom_name = dev->used_by_domname;
}
const char *virUSBDeviceGetName(virUSBDevicePtr dev)
diff --git a/src/util/virusb.h b/src/util/virusb.h
index e0a7c4c..f98ea21 100644
--- a/src/util/virusb.h
+++ b/src/util/virusb.h
@@ -60,8 +60,12 @@ int virUSBDeviceFind(unsigned int vendor,
virUSBDevicePtr *usb);
void virUSBDeviceFree(virUSBDevicePtr dev);
-void virUSBDeviceSetUsedBy(virUSBDevicePtr dev, const char *name);
-const char *virUSBDeviceGetUsedBy(virUSBDevicePtr dev);
+int virUSBDeviceSetUsedBy(virUSBDevicePtr dev,
+ const char *drv_name,
+ const char *dom_name);
+void virUSBDeviceGetUsedBy(virUSBDevicePtr dev,
+ const char **drv_name,
+ const char **dom_name);
const char *virUSBDeviceGetName(virUSBDevicePtr dev);
unsigned int virUSBDeviceGetBus(virUSBDevicePtr dev);
diff --git a/tests/virscsitest.c b/tests/virscsitest.c
index d4b3e4a..586c41b 100644
--- a/tests/virscsitest.c
+++ b/tests/virscsitest.c
@@ -91,13 +91,13 @@ test2(const void *data ATTRIBUTE_UNUSED)
if (!virSCSIDeviceIsAvailable(dev))
goto cleanup;
- if (virSCSIDeviceSetUsedBy(dev, "fc18") < 0)
+ if (virSCSIDeviceSetUsedBy(dev, "QEMU", "fc18") < 0)
goto cleanup;
if (virSCSIDeviceIsAvailable(dev))
goto cleanup;
- if (virSCSIDeviceSetUsedBy(dev, "fc20") < 0)
+ if (virSCSIDeviceSetUsedBy(dev, "QEMU", "fc20") < 0)
goto cleanup;
if (virSCSIDeviceIsAvailable(dev))
@@ -117,7 +117,7 @@ test2(const void *data ATTRIBUTE_UNUSED)
if (!virSCSIDeviceListFind(list, dev))
goto cleanup;
- virSCSIDeviceListDel(list, dev, "fc20");
+ virSCSIDeviceListDel(list, dev, "QEMU", "fc20");
if (!virSCSIDeviceListFind(list, dev))
goto cleanup;
May be some tests with the "LXC" value couldn't harm.
--
Cedric