Re: [libvirt] [PATCH 1/6] Add pci utility functions

Add implementations of dettach, reattach and reset for PCI devices. Background to this code can be found here: http://marc.info/?l=kvm&m=123454366317045 Some notes: * pci-stub was first introduced in 2.6.29; if it's not available, then dettach can only unbind the device from the host driver * remove_id is queued up for 2.6.30; in it's absence reattach cannot re-bind the device to the original driver * If the device supports Function Level Reset, we just don't bother doing the reset - KVM will do this before and after a guest runs * Currently, if a reset would affect another device on the same bus, or another function on the same multi-function device, then we just refuse to do the reset. In future, we could allow the reset as long as it doesn't affect a device in use by the host or assigned to another guest * The device reset code is similar in concept to some of Xen's code * This code should use libpciaccess - libpci isn't an option because we can't handle malloc failures with it Signed-off-by: Mark McLoughlin <markmc(a)redhat.com&gt;

+/* PM12 3.2.4 Power Management Control/Status (Offset = 4) */ +#define PCI_PM_CTRL 4 /* PM control and status register */ +#define PCI_PM_CTRL_STATE_MASK 0x3 /* Current power state (D0 to D3) */ +#define PCI_PM_CTRL_STATE_D0 0x0 /* D0 state */ +#define PCI_PM_CTRL_STATE_D3hot 0x3 /* D3 state */ +#define PCI_PM_CTRL_NO_SOFT_RESET 0x4 /* No reset for D3hot->D0 */