May 2019 - Devel - libvirt List Archives

[libvirt] [PATCH 0/2] node device cleanup
by Pavel Hrdina 13 May '19

13 May '19

Pavel Hrdina (2): node_device_udev: remove deprecated logging function src: remove HAL node device driver configure.ac | 3 +- docs/drvnodedev.html.in | 3 +- docs/hvsupport.pl | 2 +- libvirt.spec.in | 1 - m4/virt-hal.m4 | 10 +- m4/virt-udev.m4 | 5 - po/POTFILES | 1 - src/node_device/Makefile.inc.am | 12 - src/node_device/node_device_driver.c | 10 +- src/node_device/node_device_driver.h | 5 - src/node_device/node_device_hal.c | 804 --------------------------- src/node_device/node_device_hal.h | 22 - src/node_device/node_device_udev.c | 41 -- 13 files changed, 9 insertions(+), 910 deletions(-) delete mode 100644 src/node_device/node_device_hal.c delete mode 100644 src/node_device/node_device_hal.h -- 2.21.0

3 4

[libvirt] [PATCH] virsh: Don't leak disk targets in cmdDomBlkError
by Michal Privoznik 13 May '19

13 May '19

The virDomainGetDiskErrors() API copies disk targets into @disks array that we allocate. But we forgot to free it: ==140828== 16 bytes in 4 blocks are definitely lost in loss record 41 of 242 ==140828== at 0x4C2F08F: malloc (vg_replace_malloc.c:299) ==140828== by 0x8C406D9: strdup (in /lib64/libc-2.28.so) ==140828== by 0x5377DD3: virStrdup (virstring.c:966) ==140828== by 0x54C112F: testDomainGetDiskErrors (test_driver.c:3068) ==140828== by 0x55C863D: virDomainGetDiskErrors (libvirt-domain.c:10988) ==140828== by 0x15D1FA: cmdDomBlkError (virsh-domain-monitor.c:1215) ==140828== by 0x17F1A8: vshCommandRun (vsh.c:1335) ==140828== by 0x13489E: main (virsh.c:920) Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> --- Pushed under trivial rule. tools/virsh-domain-monitor.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c index d87475f6f6..d2b7e5a059 100644 --- a/tools/virsh-domain-monitor.c +++ b/tools/virsh-domain-monitor.c @@ -1229,6 +1229,8 @@ cmdDomBlkError(vshControl *ctl, const vshCmd *cmd) ret = true; cleanup: + for (i = 0; i < count; i++) + VIR_FREE(disks[i].disk); VIR_FREE(disks); virshDomainFree(dom); return ret; -- 2.21.0

1 0

[libvirt] [PATCH 0/4] docs: Ship and install a few more files
by Andrea Bolognani 13 May '19

13 May '19

Our handling of documentation is far from perfect, and a few issues in particular are causing me quite a bit of grief on the Debian packaging side of things. This series takes care of the more pressing matters; I have further cleanups planned for later. Andrea Bolognani (4): docs: Introduce $(modules) docs: Introduce $(devhelphtml_generated) docs: Install documentation under $(docdir) examples: Install under $(docdir) configure.ac | 13 ------------- docs/Makefile.am | 38 ++++++++++++++++++++++++-------------- examples/Makefile.am | 11 +++++++++++ libvirt.spec.in | 14 +------------- 4 files changed, 36 insertions(+), 40 deletions(-) -- 2.20.1

3 7

[libvirt] [PATCH] util: fix a bug found in sorting cache monitor results
by Wang Huaqiang 13 May '19

13 May '19

From: Huaqiang <huaqiang.wang(a)intel.com> The qsort element is a pointer of virResctrlMonitorStats, and the comparing function's arguments have a type of pointer of virResctrlMonitorStatsPtr. Signed-off-by: Huaqiang <huaqiang.wang(a)intel.com> --- src/util/virresctrl.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/src/util/virresctrl.c b/src/util/virresctrl.c index b845f36..a190977 100644 --- a/src/util/virresctrl.c +++ b/src/util/virresctrl.c @@ -2659,8 +2659,8 @@ static int virResctrlMonitorStatsSorter(const void *a, const void *b) { - return ((virResctrlMonitorStatsPtr)a)->id - - ((virResctrlMonitorStatsPtr)b)->id; + return (*(virResctrlMonitorStatsPtr *)a)->id + - (*(virResctrlMonitorStatsPtr *)b)->id; } @@ -2758,7 +2758,7 @@ virResctrlMonitorGetStats(virResctrlMonitorPtr monitor, /* Sort in id's ascending order */ if (*nstats) - qsort(*stats, *nstats, sizeof(*stat), virResctrlMonitorStatsSorter); + qsort(*stats, *nstats, sizeof(stat), virResctrlMonitorStatsSorter); ret = 0; cleanup: -- 2.7.4

3 2

[libvirt] [PATCH RFC] network: Delay creating private chains until starting network
by Jim Fehlig 13 May '19

13 May '19

Automated performance tests found that network-centric workloads suffered a 20 percent decrease when the host libvirt was updated from 5.0.0 to 5.1.0. On the test hosts libvirtd is enabled to start at boot and the "default" network is defined, but it is not set to autostart. libvirt 5.1.0 introduced private firewall chains with commit 5f1e6a7d. The chains are created at libvirtd start, which triggers loading the conntrack kernel module. Subsequent tracking and processing of connections resulted in the performance hit. Prior to commit 5f1e6a7d the conntrack module would not be loaded until starting a network, when libvirt added rules to the builtin chains. Restore the behavior of previous libvirt versions by delaying the creation of private chains until the first network is started. Signed-off-by: Jim Fehlig <jfehlig(a)suse.com> --- I briefly discussed this issue with Daniel on IRC and just now finding time to bring it to the list for broader discussion. The adjustment to the test file feels hacky. The whole approach might by hacky, hence the RFC. src/network/bridge_driver_linux.c | 64 +++------- .../nat-default-linux.args | 116 ++++++++++++++++++ 2 files changed, 131 insertions(+), 49 deletions(-) diff --git a/src/network/bridge_driver_linux.c b/src/network/bridge_driver_linux.c index f2827543ca..a3a09caeba 100644 --- a/src/network/bridge_driver_linux.c +++ b/src/network/bridge_driver_linux.c @@ -35,44 +35,10 @@ VIR_LOG_INIT("network.bridge_driver_linux"); #define PROC_NET_ROUTE "/proc/net/route" -static virErrorPtr errInitV4; -static virErrorPtr errInitV6; +static bool pvtChainsCreated; void networkPreReloadFirewallRules(bool startup) { - bool created = false; - int rc; - - /* We create global rules upfront as we don't want - * the perf hit of conditionally figuring out whether - * to create them each time a network is started. - * - * Any errors here are saved to be reported at time - * of starting the network though as that makes them - * more likely to be seen by a human - */ - rc = iptablesSetupPrivateChains(VIR_FIREWALL_LAYER_IPV4); - if (rc < 0) { - errInitV4 = virSaveLastError(); - virResetLastError(); - } else { - virFreeError(errInitV4); - errInitV4 = NULL; - } - if (rc) - created = true; - - rc = iptablesSetupPrivateChains(VIR_FIREWALL_LAYER_IPV6); - if (rc < 0) { - errInitV6 = virSaveLastError(); - virResetLastError(); - } else { - virFreeError(errInitV6); - errInitV6 = NULL; - } - if (rc) - created = true; - /* * If this is initial startup, and we just created the * top level private chains we either @@ -86,8 +52,8 @@ void networkPreReloadFirewallRules(bool startup) * rules will be present. Thus we can safely just tell it * to always delete from the builin chain */ - if (startup && created) - iptablesSetDeletePrivate(false); + if (startup) + iptablesSetDeletePrivate(true); } @@ -701,19 +667,19 @@ int networkAddFirewallRules(virNetworkDefPtr def) virFirewallPtr fw = NULL; int ret = -1; - if (errInitV4 && - (virNetworkDefGetIPByIndex(def, AF_INET, 0) || - virNetworkDefGetRouteByIndex(def, AF_INET, 0))) { - virSetError(errInitV4); - return -1; - } + if (!pvtChainsCreated) { + if (iptablesSetupPrivateChains(VIR_FIREWALL_LAYER_IPV4) < 0 && + (virNetworkDefGetIPByIndex(def, AF_INET, 0) || + virNetworkDefGetRouteByIndex(def, AF_INET, 0))) + return -1; - if (errInitV6 && - (virNetworkDefGetIPByIndex(def, AF_INET6, 0) || - virNetworkDefGetRouteByIndex(def, AF_INET6, 0) || - def->ipv6nogw)) { - virSetError(errInitV6); - return -1; + if (iptablesSetupPrivateChains(VIR_FIREWALL_LAYER_IPV6) < 0 && + (virNetworkDefGetIPByIndex(def, AF_INET6, 0) || + virNetworkDefGetRouteByIndex(def, AF_INET6, 0) || + def->ipv6nogw)) + return -1; + + pvtChainsCreated = true; } if (def->bridgeZone) { diff --git a/tests/networkxml2firewalldata/nat-default-linux.args b/tests/networkxml2firewalldata/nat-default-linux.args index c9d523d043..61d620b592 100644 --- a/tests/networkxml2firewalldata/nat-default-linux.args +++ b/tests/networkxml2firewalldata/nat-default-linux.args @@ -1,5 +1,121 @@ iptables \ --table filter \ +--list-rules +iptables \ +--table nat \ +--list-rules +iptables \ +--table mangle \ +--list-rules +iptables \ +--table filter \ +--new-chain LIBVIRT_INP +iptables \ +--table filter \ +--insert INPUT \ +--jump LIBVIRT_INP +iptables \ +--table filter \ +--new-chain LIBVIRT_OUT +iptables \ +--table filter \ +--insert OUTPUT \ +--jump LIBVIRT_OUT +iptables \ +--table filter \ +--new-chain LIBVIRT_FWO +iptables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWO +iptables \ +--table filter \ +--new-chain LIBVIRT_FWI +iptables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWI +iptables \ +--table filter \ +--new-chain LIBVIRT_FWX +iptables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWX +iptables \ +--table nat \ +--new-chain LIBVIRT_PRT +iptables \ +--table nat \ +--insert POSTROUTING \ +--jump LIBVIRT_PRT +iptables \ +--table mangle \ +--new-chain LIBVIRT_PRT +iptables \ +--table mangle \ +--insert POSTROUTING \ +--jump LIBVIRT_PRT +ip6tables \ +--table filter \ +--list-rules +ip6tables \ +--table nat \ +--list-rules +ip6tables \ +--table mangle \ +--list-rules +ip6tables \ +--table filter \ +--new-chain LIBVIRT_INP +ip6tables \ +--table filter \ +--insert INPUT \ +--jump LIBVIRT_INP +ip6tables \ +--table filter \ +--new-chain LIBVIRT_OUT +ip6tables \ +--table filter \ +--insert OUTPUT \ +--jump LIBVIRT_OUT +ip6tables \ +--table filter \ +--new-chain LIBVIRT_FWO +ip6tables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWO +ip6tables \ +--table filter \ +--new-chain LIBVIRT_FWI +ip6tables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWI +ip6tables \ +--table filter \ +--new-chain LIBVIRT_FWX +ip6tables \ +--table filter \ +--insert FORWARD \ +--jump LIBVIRT_FWX +ip6tables \ +--table nat \ +--new-chain LIBVIRT_PRT +ip6tables \ +--table nat \ +--insert POSTROUTING \ +--jump LIBVIRT_PRT +ip6tables \ +--table mangle \ +--new-chain LIBVIRT_PRT +ip6tables \ +--table mangle \ +--insert POSTROUTING \ +--jump LIBVIRT_PRT +iptables \ +--table filter \ --insert LIBVIRT_INP \ --in-interface virbr0 \ --protocol tcp \ -- 2.21.0

3 4

[libvirt] [PATCH] qemu: Fix regression with undefine --snapshots-metadata
by Eric Blake 10 May '19

10 May '19

In refactoring the snapshot code to prepare for checkpoints, I changed qemuDomainMomentDiscardAll to take a callback that would handle the cleanup of either a snapshot or a checkpoint, but failed to set the callback on one of the two snapshot callers. As a result, 'virsh undefine $dom --snapshots-metadata' crashed on a NULL function dereference. Fixes: a487890d371b8cc3662c1717dfe07eea3f1ef1c0 Signed-off-by: Eric Blake <eblake(a)redhat.com> --- src/qemu/qemu_domain.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/src/qemu/qemu_domain.c b/src/qemu/qemu_domain.c index 2af17816c6..3290c5d490 100644 --- a/src/qemu/qemu_domain.c +++ b/src/qemu/qemu_domain.c @@ -8664,7 +8664,8 @@ qemuDomainSnapshotDiscardAllMetadata(virQEMUDriverPtr driver, virQEMUMomentRemove rem = { .driver = driver, .vm = vm, - .metadata_only = true + .metadata_only = true, + .momentDiscard = qemuDomainSnapshotDiscard, }; virDomainSnapshotForEach(vm->snapshots, qemuDomainMomentDiscardAll, &rem); -- 2.20.1

2 1

[libvirt] Running libvirtd out of source directory connection reset error
by Peter P. 10 May '19

10 May '19

Hi all, I'm getting started with hacking around with libvirt and am trying to familiarize myself with launching and running an instance of libvirtd I built from source on Centos 7.6. Following the instructions from https://libvirt.org/compiling.html to launch my built versions of libvirtd and virsh, I get the following error with no other context when trying to start a domain using "virsh start mydomain": error: Cannot recv data: Connection reset by peer Despite this error, I am able to run commands list virsh list. Are there additional parameters needed to launch libvirtd or additional services I need to start up alongside it? Thanks, Peter

2 2

[libvirt] [PATCH RFC] iohelper: Introduces a small sleep do avoid hunging other tasks
by Leonardo Bras 10 May '19

10 May '19

While dumping very large VMs (over 128GB), iohelper seems to cause very intense IO usage on the disk, and it causes some processes (like journald) to hung, and depending on kernel configuration, to panic. This change creates a time window, after every 10GB written, so this processes can write to the disk, and avoid hunging. Signed-off-by: Leonardo Bras <leonardo(a)linux.ibm.com> --- src/util/iohelper.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/src/util/iohelper.c b/src/util/iohelper.c index ddc338b7c7..164c1e2085 100644 --- a/src/util/iohelper.c +++ b/src/util/iohelper.c @@ -52,6 +52,8 @@ runIO(const char *path, int fd, int oflags) unsigned long long total = 0; bool direct = O_DIRECT && ((oflags & O_DIRECT) != 0); off_t end = 0; + const unsigned long long sleep_step = (long long)10*1024*1024*1024; + unsigned long long next_sleep = sleep_step; #if HAVE_POSIX_MEMALIGN if (posix_memalign(&base, alignMask + 1, buflen)) { @@ -128,6 +130,12 @@ runIO(const char *path, int fd, int oflags) total += got; + /* sleeps for a while to avoid hunging other tasks */ + if (total > next_sleep) { + next_sleep += sleep_step; + usleep(100*1000); + } + /* handle last write size align in direct case */ if (got < buflen && direct && fdout == fd) { ssize_t aligned_got = (got + alignMask) & ~alignMask; -- 2.20.1

3 3

[libvirt] [PATCH v2] Add support for podman in Makefile.ci
by Martin Kletzander 10 May '19

10 May '19

This way more users can run our CI builds locally. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> --- Makefile.ci | 91 ++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 70 insertions(+), 21 deletions(-) diff --git a/Makefile.ci b/Makefile.ci index 12a62167cc67..241c58d2d4e9 100644 --- a/Makefile.ci +++ b/Makefile.ci @@ -17,7 +17,7 @@ CI_GIT_ROOT = $(shell git rev-parse --show-toplevel) CI_HOST_SRCDIR = $(CI_SCRATCHDIR)/src # The directory holding the source inside the -# container. ie where we told Docker to expose +# container, i.e. where we want to expose # the $(CI_HOST_SRCDIR) directory from the host CI_CONT_SRCDIR = /src @@ -46,14 +46,13 @@ CI_CONFIGURE_ARGS = # cloning them CI_SUBMODULES = $(shell git submodule | awk '{ print $$2 }') -# Location of the Docker images we're going to pull +# Location of the container images we're going to pull # Can be useful to overridde to use a locally built # image instead CI_IMAGE_PREFIX = quay.io/libvirt/buildenv- -# Docker defaults to pulling the ':latest' tag but -# if the Docker repo above uses different conventions -# this can override it +# The default tag is ':latest' but if the container +# repo above uses different conventions this can override it CI_IMAGE_TAG = :master # We delete the virtual root after completion, set @@ -71,15 +70,23 @@ CI_REUSE = 0 CI_UID = $(shell id -u) CI_GID = $(shell id -g) -# Docker doesn't require the IDs you run as to exist in +CI_ENGINE = auto +# Container engine we are going to use, can be overridden per make +# invocation, if it is not we try podman and then default to docker. +ifeq ($(CI_ENGINE),auto) + override CI_ENGINE = $(shell podman version >/dev/null 2>&1 && echo podman || echo docker) +endif + +# IDs you run as do not need to exist in # the container's /etc/passwd & /etc/group files, but -# if they do not, then libvirt's 'make check' will fail +# if they do not, then libvirt's 'make check' will fail # many tests. -# + # We do not directly mount /etc/{passwd,group} as Docker # is liable to mess with SELinux labelling which will -# then prevent the host accessing them. Copying them -# first is safer. +# then prevent the host accessing them. And podman cannot +# relabel the files due to it running rootless. So +# copying them first is safer and error-prone. CI_PWDB_MOUNTS = \ --volume $(CI_SCRATCHDIR)/group:/etc/group:ro,z \ --volume $(CI_SCRATCHDIR)/passwd:/etc/passwd:ro,z \ @@ -90,6 +97,46 @@ CI_PWDB_MOUNTS = \ # libvirt very slow at exec'ing programs. CI_ULIMIT_FILES = 1024 +ifeq ($(CI_ENGINE),podman) + # Podman cannot reuse host namespace when running non-root containers. Until + # support for --keep-uid is added we can just create another mapping that will + # do that for us. Beware, that in {uid,git}map=container_id:host_id:range, + # the host_id does actually refer to the uid in the first mapping where 0 + # (root) is mapped to the current user and rest is offset. + + # In order to set up this mapping, we need to keep all the user IDs to prevent + # possible errors as some images might expect UIDs up to 90000 (looking at you + # fedora), so we don't want the overflowuid to be used for them. For mapping + # all the other users properly ther eneeds to be some math done. Don't worry, + # it's just addition and subtraction. + + # 65536 ought to be enough (tm), but for really rare cases the maximums might + # need to be higher, but that only happens when your /etc/sub{u,g}id allow + # users to have more IDs. Unless --keep-uid is supported, let's do this in a + # way that should work for everyone. + CI_MAX_UID = $(shell sed -n "s/^$USER:[^:]\+://p" /etc/subuid) + CI_MAX_GID = $(shell sed -n "s/^$USER:[^:]\+://p" /etc/subgid) + ifeq ($(CI_MAX_UID),) + CI_MAX_UID = 65536 + endif + ifeq ($(CI_MAX_GID),) + CI_MAX_GID = 65536 + endif + CI_UID_OTHER = $(shell echo $$(($(CI_UID)+1))) + CI_GID_OTHER = $(shell echo $$(($(CI_GID)+1))) + CI_UID_OTHER_RANGE = $(shell echo $$(($(CI_MAX_UID)-$(CI_UID)))) + CI_GID_OTHER_RANGE = $(shell echo $$(($(CI_MAX_GID)-$(CI_GID)))) + + CI_PODMAN_ARGS = \ + --uidmap 0:1:$(CI_UID) \ + --uidmap $(CI_UID):0:1 \ + --uidmap $(CI_UID_OTHER):$(CI_UID_OTHER):$(CI_UID_OTHER_RANGE) \ + --gidmap 0:1:$(CI_GID) \ + --gidmap $(CI_GID):0:1 \ + --gidmap $(CI_GID_OTHER):$(CI_GID_OTHER):$(CI_GID_OTHER_RANGE) \ + $(NULL) +endif + # Args to use when cloning a git repo. # -c stop it complaining about checking out a random hash # -q stop it displaying progress info for local clone @@ -100,7 +147,7 @@ CI_GIT_ARGS = \ --local \ $(NULL) -# Args to use when running the Docker env +# Args to use when running the container # --rm stop inactive containers getting left behind # --user we execute as the same user & group account # as dev so that file ownership matches host @@ -110,22 +157,23 @@ CI_GIT_ARGS = \ # --ulimit lower files limit for performance reasons # --interactive # --tty Ensure we have ability to Ctrl-C the build -CI_DOCKER_ARGS = \ +CI_ENGINE_ARGS = \ --rm \ --user $(CI_UID):$(CI_GID) \ --interactive \ --tty \ + $(CI_PODMAN_ARGS) \ $(CI_PWDB_MOUNTS) \ --volume $(CI_HOST_SRCDIR):$(CI_CONT_SRCDIR):z \ --workdir $(CI_CONT_SRCDIR) \ --ulimit nofile=$(CI_ULIMIT_FILES):$(CI_ULIMIT_FILES) \ $(NULL) -ci-check-docker: - @echo -n "Checking if Docker is available and running..." && \ - docker version 1>/dev/null && echo "yes" +ci-check-engine: + @echo -n "Checking if $(CI_ENGINE) is available..." && \ + $(CI_ENGINE) version 1>/dev/null && echo "yes" -ci-prepare-tree: ci-check-docker +ci-prepare-tree: ci-check-engine @test "$(CI_REUSE)" != "1" && rm -rf $(CI_SCRATCHDIR) || : @if ! test -d $(CI_SCRATCHDIR) ; then \ mkdir -p $(CI_SCRATCHDIR); \ @@ -150,7 +198,7 @@ ci-prepare-tree: ci-check-docker # gl_public_submodule_commit= to disable gnulib's submodule check # which breaks due to way we clone the submodules ci-build@%: ci-prepare-tree - docker run $(CI_DOCKER_ARGS) $(CI_IMAGE_PREFIX)$*$(CI_IMAGE_TAG) \ + $(CI_ENGINE) run $(CI_ENGINE_ARGS) $(CI_IMAGE_PREFIX)$*$(CI_IMAGE_TAG) \ /bin/bash -c '\ mkdir -p $(CI_CONT_BUILDDIR) || exit 1 ; \ cd $(CI_CONT_BUILDDIR) ; \ @@ -179,11 +227,11 @@ ci-check@%: $(MAKE) -f $(CI_MAKEFILE) ci-build@$* CI_MAKE_ARGS="check" ci-shell@%: ci-prepare-tree - docker run $(CI_DOCKER_ARGS) $(CI_IMAGE_PREFIX)$*$(CI_IMAGE_TAG) /bin/bash + $(CI_ENGINE) run $(CI_ENGINE_ARGS) $(CI_IMAGE_PREFIX)$*$(CI_IMAGE_TAG) /bin/bash @test "$(CI_CLEAN)" = "1" && rm -rf $(CI_SCRATCHDIR) || : ci-help: - @echo "Build libvirt inside Docker containers used for CI" + @echo "Build libvirt inside containers used for CI" @echo @echo "Available targets:" @echo @@ -215,6 +263,7 @@ ci-help: @echo @echo "Available make variables:" @echo - @echo " CI_CLEAN=0 - do not delete '$(CI_SCRATCHDIR)' after completion" - @echo " CI_REUSE=1 - re-use existing '$(CI_SCRATCHDIR)' content" + @echo " CI_CLEAN=0 - do not delete '$(CI_SCRATCHDIR)' after completion" + @echo " CI_REUSE=1 - re-use existing '$(CI_SCRATCHDIR)' content" + @echo " CI_ENGINE=auto - container engine to use (podman, docker)" @echo -- 2.21.0

2 1

[libvirt] [jenkins-ci PATCH 0/6] Add support for gtk-vnc builds
by Daniel P. Berrangé 10 May '19

10 May '19

Support gtk-vnc and make virt-viewer depend on it Daniel P. Berrangé (6): mappings: add libgcrypt native & mingw packages mappings: add pulseaudio libs for native packages projects: add gtk-vnc project projects: make virt-viewer depend on gtk-vnc jobs mappings: remove gtk-vnc2 native and mingw packages jobs: allow test-suite.log to exist anywhere guests/host_vars/libvirt-centos-7/main.yml | 1 + guests/host_vars/libvirt-debian-9/main.yml | 1 + guests/host_vars/libvirt-debian-sid/main.yml | 1 + guests/host_vars/libvirt-fedora-29/main.yml | 1 + guests/host_vars/libvirt-fedora-30/main.yml | 1 + .../host_vars/libvirt-fedora-rawhide/main.yml | 3 +++ guests/host_vars/libvirt-freebsd-11/main.yml | 1 + guests/host_vars/libvirt-freebsd-12/main.yml | 1 + .../libvirt-freebsd-current/main.yml | 1 + guests/host_vars/libvirt-ubuntu-18/main.yml | 1 + .../build/jobs/autotools-check-job.yml | 2 +- guests/playbooks/build/jobs/defaults.yml | 3 +++ .../build/projects/gtk-vnc+mingw32.yml | 12 +++++++++ .../build/projects/gtk-vnc+mingw64.yml | 12 +++++++++ guests/playbooks/build/projects/gtk-vnc.yml | 12 +++++++++ guests/vars/mappings.yml | 27 ++++++++++--------- guests/vars/projects/gtk-vnc+mingw32.yml | 6 +++++ guests/vars/projects/gtk-vnc+mingw64.yml | 6 +++++ guests/vars/projects/gtk-vnc.yml | 11 ++++++++ guests/vars/projects/virt-viewer+mingw32.yml | 1 - guests/vars/projects/virt-viewer+mingw64.yml | 1 - guests/vars/projects/virt-viewer.yml | 1 - jenkins/jobs/autotools.yaml | 2 +- jenkins/jobs/defaults.yaml | 3 +++ jenkins/projects/gtk-vnc+mingw32.yaml | 11 ++++++++ jenkins/projects/gtk-vnc+mingw64.yaml | 11 ++++++++ jenkins/projects/gtk-vnc.yaml | 15 +++++++++++ jenkins/projects/virt-viewer+mingw32.yaml | 4 ++- jenkins/projects/virt-viewer+mingw64.yaml | 4 ++- jenkins/projects/virt-viewer.yaml | 4 ++- 30 files changed, 140 insertions(+), 20 deletions(-) create mode 100644 guests/playbooks/build/projects/gtk-vnc+mingw32.yml create mode 100644 guests/playbooks/build/projects/gtk-vnc+mingw64.yml create mode 100644 guests/playbooks/build/projects/gtk-vnc.yml create mode 100644 guests/vars/projects/gtk-vnc+mingw32.yml create mode 100644 guests/vars/projects/gtk-vnc+mingw64.yml create mode 100644 guests/vars/projects/gtk-vnc.yml create mode 100644 jenkins/projects/gtk-vnc+mingw32.yaml create mode 100644 jenkins/projects/gtk-vnc+mingw64.yaml create mode 100644 jenkins/projects/gtk-vnc.yaml -- 2.21.0

2 16