November 2011 - Devel - Libvirt List Archives

by Chandrashekhar Jamadarkhani (cjamadar)

Hi, I'm planning to use libvirt in a remote machine which is running on QNX RTOS. Whether libvirt is ported to QNX, if not any problems in porting libvirt lib to QNX ? Appreciate your help on this. Thanks, Chandrashekhar

13 years

2
2
0 / 0

[libvirt] [PATCH] util : fix compile error on fedora14 Add src/util/virnetdevbandwidth.h, src/util/virnetdevveth.h, src/util/virnetdevvportprofile.h to private symbols.

by taget＠linux.vnet.ibm.com

From: Eli Qiao <taget(a)linux.vnet.ibm.com> Signed-off-by: Eli Qiao <taget(a)linux.vnet.ibm.com> --- src/libvirt_private.syms | 19 +++++++++++++++++++ 1 files changed, 19 insertions(+), 0 deletions(-) diff --git a/src/libvirt_private.syms b/src/libvirt_private.syms index 7b96a3c..f178662 100644 --- a/src/libvirt_private.syms +++ b/src/libvirt_private.syms @@ -1201,9 +1201,19 @@ virNetDevSetIPv4Address; virNetDevSetMAC; virNetDevSetMTU; virNetDevSetMTUFromDevice; +virNetDevSetName; +virNetDevSetNamespace; virNetDevSetOnline; +# virnetdevbandwidth.h +virNetDevBandwidthClear; +virNetDevBandwidthCopy; +virNetDevBandwidthEqual; +virNetDevBandwidthFree; +virNetDevBandwidthSet; + + # virnetdevbridge.h virNetDevBridgeAddPort; virNetDevBridgeCreate; @@ -1221,6 +1231,15 @@ virNetDevTapCreateInBridgePort; virNetDevTapDelete; +# virnetdevveth.h +virNetDevVethCreate; +virNetDevVethDelete; + + +# virnetdevvportprofile.h +virNetDevVPortProfileEqual; + + # virnetmessage.h virNetMessageClear; virNetMessageDecodeNumFDs; -- 1.7.4.4

13 years

5
4
0 / 0

[libvirt] [PATCH v3] Add support for systemd init service

by Daniel P. Berrange

From: "Daniel P. Berrange" <berrange(a)redhat.com> Followup to https://www.redhat.com/archives/libvir-list/2011-November/msg00580.html This patch adds support for a systemd init service for libvirtd and libvirt-guests. The libvirtd.service is *not* written to use socket activation, since we want libvirtd to start on boot so it can do guest auto-start. The libvirt-guests.service is pretty lame, just exec'ing the original init script for now. Ideally we would factor out the functionality, into some shared tool. Instead of ./configure --with-init-script=redhat You can now do ./configure --with-init-script=systemd Or better still: ./configure --with-init-script=systemd+redhat * configure.ac: Add systemd, and systemd+redhat options to --with-init-script option * daemon/Makefile.am: Install systemd services * daemon/libvirtd.sysconf: Add note about unused env variable with systemd * daemon/libvirtd.service.in: libvirtd systemd service unit * libvirt.spec.in: Add scripts to installing systemd services and migrating from legacy init scripts * tools/Makefile.am: Install systemd services * tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in * tools/libvirt-guests.service.in: systemd service unit In v2: - Fix AC_MSG_HELP wrapping - Fix %makeinstall target - Explicitly handle 'none' for --with-initscript - Revert rename of libvirt-guests.sh --- configure.ac | 37 +++++++++++---- daemon/.gitignore | 1 + daemon/Makefile.am | 77 +++++++++++++++++++++++--------- daemon/libvirtd.service.in | 20 ++++++++ daemon/libvirtd.sysconf | 3 + libvirt.spec.in | 93 +++++++++++++++++++++++++++++++++++++- po/POTFILES.in | 2 +- tools/Makefile.am | 61 ++++++++++++++++++++----- tools/libvirt-guests.service.in | 13 +++++ 9 files changed, 260 insertions(+), 47 deletions(-) create mode 100644 daemon/libvirtd.service.in create mode 100644 tools/libvirt-guests.service.in diff --git a/configure.ac b/configure.ac index 3b7535e..c663f7b 100644 --- a/configure.ac +++ b/configure.ac @@ -329,16 +329,33 @@ dnl init script flavor dnl AC_MSG_CHECKING([for init script flavor]) AC_ARG_WITH([init-script], - [AC_HELP_STRING([--with-init-script=@<:@redhat|auto|none@:>@], - [Style of init script to install @<:@default=auto@:>@])]) -if test "x$with_init_script" = "x" || test "x$with_init_script" = "xauto"; then - if test "$cross_compiling" = yes || test ! -f /etc/redhat-release; then - with_init_script=none - else - with_init_script=redhat - fi -fi -AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test x$with_init_script = xredhat) + [AC_HELP_STRING([--with-init-script@<:@=STYLE@:>@], + [Style of init script to install: redhat, systemd, systemd+redhat, + upstart, auto, none @<:@default=auto@:>@])]) +init_redhat=no +init_systemd=no +case "$with_init_script" in + systemd+redhat) + init_redhat=yes + init_systemd=yes + ;; + systemd) + init_systemd=yes + ;; + redhat) + init_redhat=yes + ;; + none) + ;; + *) + if test "$cross_compiling" != yes && test -f /etc/redhat-release; then + init_redhat=yes + with_init_script=redhat + fi + ;; +esac +AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test "$init_redhat" = "yes") +AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_SYSTEMD], test "$init_systemd" = "yes") AC_MSG_RESULT($with_init_script) dnl RHEL-5 has a peculiar version of Xen, which requires some special casing diff --git a/daemon/.gitignore b/daemon/.gitignore index ab3d093..2873143 100644 --- a/daemon/.gitignore +++ b/daemon/.gitignore @@ -7,6 +7,7 @@ Makefile.in libvirt_qemud libvirtd libvirtd.init +libvirtd.service libvirtd*.logrotate libvirtd.8 libvirtd.8.in diff --git a/daemon/Makefile.am b/daemon/Makefile.am index e8c47ae..92b6b86 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -170,13 +170,14 @@ policyfile = libvirtd.policy-1 endif endif -install-data-local: install-init install-data-sasl install-data-polkit \ - install-logrotate +install-data-local: install-init install-systemd install-data-sasl install-data-polkit \ + install-logrotate install-sysctl mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt mkdir -p $(DESTDIR)$(localstatedir)/run/libvirt mkdir -p $(DESTDIR)$(localstatedir)/lib/libvirt -uninstall-local:: uninstall-init uninstall-data-sasl uninstall-data-polkit +uninstall-local:: uninstall-init uninstall-systemd uninstall-data-sasl uninstall-data-polkit \ + uninstall-sysctl rmdir $(DESTDIR)$(localstatedir)/log/libvirt || : rmdir $(DESTDIR)$(localstatedir)/run/libvirt || : rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || : @@ -234,25 +235,56 @@ install-logrotate: $(LOGROTATE_CONFS) $(INSTALL_DATA) libvirtd.lxc.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc $(INSTALL_DATA) libvirtd.uml.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml -if LIBVIRT_INIT_SCRIPT_RED_HAT -install-init: libvirtd.init - mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d \ - $(DESTDIR)$(sysconfdir)/sysconfig \ - $(DESTDIR)$(sysconfdir)/sysctl.d - $(INSTALL_SCRIPT) libvirtd.init \ - $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd +install-sysconfig: + mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig $(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \ $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd +uninstall-sysconfig: + rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd + +install-sysctl: + mkdir -p $(DESTDIR)$(sysconfdir)/sysctl.d $(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \ $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd -uninstall-init: - rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd \ - $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd +uninstall-sysctl: + rm -f $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd + +if LIBVIRT_INIT_SCRIPT_RED_HAT BUILT_SOURCES += libvirtd.init +install-init: install-sysconfig libvirtd.init + mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d + $(INSTALL_SCRIPT) libvirtd.init \ + $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd + +uninstall-init: uninstall-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd +else +install-init: +uninstall-init: +endif # LIBVIRT_INIT_SCRIPT_RED_HAT + + +EXTRA_DIST += libvirtd.service.in +if LIBVIRT_INIT_SCRIPT_SYSTEMD + +SYSTEMD_UNIT_DIR = /lib/systemd/system +BUILT_SOURCES += libvirtd.service + +install-systemd: install-sysconfig libvirtd.service + mkdir -p $(DESTDIR)$(SYSTEMD_UNIT_DIR) + $(INSTALL_SCRIPT) libvirtd.service \ + $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service + +uninstall-systemd: uninstall-sysconfig + rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service +else +install-systemd: +uninstall-systemd: +endif # LIBVIRT_INIT_SCRIPT_SYSTEMD + libvirtd.init: libvirtd.init.in $(top_builddir)/config.status $(AM_V_GEN)sed \ -e s!\@localstatedir\@!@localstatedir@!g \ @@ -262,18 +294,21 @@ libvirtd.init: libvirtd.init.in $(top_builddir)/config.status chmod a+x $@-t && \ mv $@-t $@ +libvirtd.service: libvirtd.service.in $(top_builddir)/config.status + $(AM_V_GEN)sed \ + -e s!\@localstatedir\@!@localstatedir@!g \ + -e s!\@sbindir\@!@sbindir@!g \ + -e s!\@sysconfdir\@!@sysconfdir@!g \ + < $< > $@-t && \ + chmod a+x $@-t && \ + mv $@-t $@ + + check-local: $(AM_V_GEN)if test -x '$(AUGPARSE)'; then \ '$(AUGPARSE)' -I $(srcdir) $(srcdir)/test_libvirtd.aug; \ fi -else - -install-init: -uninstall-init: -libvirtd.init: - -endif # LIBVIRT_INIT_SCRIPT_RED_HAT # This must be added last, since functions it provides/replaces # are used by nearly every other library. diff --git a/daemon/libvirtd.service.in b/daemon/libvirtd.service.in new file mode 100644 index 0000000..9661428 --- /dev/null +++ b/daemon/libvirtd.service.in @@ -0,0 +1,20 @@ +# NB we don't use socket activation. When libvirtd starts it will +# spawn any virtual machines registered for autostart. We want this +# to occur on every boot, regardless of whether any client connects +# to a socket. Thus socket activation doesn't have any benefit + +[Unit] +Description=Virtualization daemon +After=syslog.target +After=udev.target +After=avahi.target +After=dbus.target +Before=libvirt-guests.service + +[Service] +EnvironmentFile=-/etc/sysconfig/libvirtd +ExecStart=@sbindir@/libvirtd $LIBVIRTD_ARGS +ExecReload=/bin/kill -HUP $MAINPID + +[Install] +WantedBy=multi-user.target diff --git a/daemon/libvirtd.sysconf b/daemon/libvirtd.sysconf index b730c5e..ab273c8 100644 --- a/daemon/libvirtd.sysconf +++ b/daemon/libvirtd.sysconf @@ -1,4 +1,7 @@ # Override the default config file +# NOTE: This setting is no longer honoured if using +# systemd. Set '--config /etc/libvirt/libvirtd.conf' +# in LIBVIRTD_ARGS instead. #LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf # Listen for TCP/IP connections diff --git a/libvirt.spec.in b/libvirt.spec.in index d4e3e17..ce541a7 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -78,6 +78,7 @@ %define with_dtrace 0%{!?_without_dtrace:0} %define with_cgconfig 0%{!?_without_cgconfig:0} %define with_sanlock 0%{!?_without_sanlock:0} +%define with_systemd 0%{!?_without_systemd:0} # Non-server/HV driver defaults which are always enabled %define with_python 0%{!?_without_python:1} @@ -111,6 +112,11 @@ %define with_hyperv 0 %endif +# Although earlier Fedora has systemd, libvirt still used sysvinit +%if 0%{?fedora} >= 17 +%define with_systemd 1 +%endif + # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC %if 0%{?rhel} == 5 %ifnarch x86_64 @@ -329,7 +335,9 @@ Requires: libcgroup # All build-time requirements BuildRequires: python-devel - +%if %{with_systemd} +BuildRequires: systemd-units +%endif %if %{with_xen} BuildRequires: xen-devel %endif @@ -474,6 +482,13 @@ BuildRequires: nfs-utils # Fedora build root suckage BuildRequires: gawk +%if %{with_systemd} +Requires(post): systemd-units +Requires(post): systemd-sysv +Requires(preun): systemd-units +Requires(postun): systemd-units +%endif + %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes @@ -696,6 +711,13 @@ of recent versions of Linux (and other OSes). %define with_packager --with-packager="%{who}, %{when}, %{where}" %define with_packager_version --with-packager-version="%{release}" +%if %{with_systemd} +# We use 'systemd+redhat', so if someone installs upstart or +# legacy init scripts, they can still start libvirtd, etc +%define init_scripts --with-init_script=systemd+redhat +%else +%define init_scripts --with-init_script=redhat +%endif %configure %{?_without_xen} \ %{?_without_qemu} \ @@ -736,7 +758,7 @@ of recent versions of Linux (and other OSes). %{with_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ - --with-init-script=redhat \ + %{init_scripts} \ --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid make %{?_smp_mflags} gzip -9 ChangeLog @@ -744,7 +766,7 @@ gzip -9 ChangeLog %install rm -fr %{buildroot} -%makeinstall +%makeinstall SYSTEMD_UNIT_DIR=%{_unitdir} for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap do (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in) @@ -893,6 +915,13 @@ do done %endif +%if %{with_systemd} +if [ $1 -eq 1 ] ; then + # Initial installation + /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || : + /bin/systemctl enable cgconfig.service >/dev/null 2>&1 || : +fi +%else %if %{with_cgconfig} # Starting with Fedora 16, systemd automounts all cgroups, and cgconfig is # no longer a necessary service. @@ -908,25 +937,64 @@ if [ "$1" -ge "1" ]; then /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif +%endif %preun %if %{with_libvirtd} +%if %{with_systemd} +if [ $1 -eq 0 ] ; then + # Package removal, not upgrade + /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || : + /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || : +fi +%else if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd fi %endif +%endif + +%postun +%if %{with_libvirtd} +%if %{with_systemd} +/bin/systemctl daemon-reload >/dev/null 2>&1 || : +if [ $1 -ge 1 ] ; then + # Package upgrade, not uninstall + /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : +fi +%endif +%endif + +%if %{with_libvirtd} +%if %{with_systemd} +%triggerun -- libvirt < 0.9.4 +%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||: + +# If the package is allowed to autostart: +/bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||: + +# Run these because the SysV package being removed won't do them +/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || : +/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : +%endif +%endif %preun client +%if %{with_systemd} +%else if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi +%endif %post client /sbin/ldconfig +%if %{with_systemd} +%else /sbin/chkconfig --add libvirt-guests if [ $1 -ge 1 ]; then level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2) @@ -937,9 +1005,22 @@ if [ $1 -ge 1 ]; then /sbin/service libvirt-guests start > /dev/null 2>&1 || true fi fi +%endif %postun client -p /sbin/ldconfig +%if %{with_systemd} +%triggerun client -- libvirt < 0.9.4 +%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||: + +# If the package is allowed to autostart: +/bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||: + +# Run these because the SysV package being removed won't do them +/sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || : +/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || : +%endif + %if %{with_libvirtd} %files %defattr(-, root, root) @@ -957,6 +1038,9 @@ fi %{_sysconfdir}/libvirt/nwfilter/*.xml %{_sysconfdir}/rc.d/init.d/libvirtd +%if %{with_systemd} +%{_unitdir}/libvirtd.service +%endif %doc daemon/libvirtd.upstart %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf @@ -1113,6 +1197,9 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd %{_datadir}/libvirt/cpu_map.xml %{_sysconfdir}/rc.d/init.d/libvirt-guests +%if %{with_systemd} +%{_unitdir}/libvirt-guests.service +%endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ diff --git a/po/POTFILES.in b/po/POTFILES.in index 810cf68..74f5513 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -152,5 +152,5 @@ src/xenapi/xenapi_utils.c src/xenxs/xen_sxpr.c src/xenxs/xen_xm.c tools/console.c -tools/libvirt-guests.init.sh +tools/libvirt-guests.init.in tools/virsh.c diff --git a/tools/Makefile.am b/tools/Makefile.am index c96c7d9..c735398 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -25,7 +25,6 @@ EXTRA_DIST = \ virt-sanlock-cleanup.in \ virt-sanlock-cleanup.8 \ virsh.pod \ - libvirt-guests.init.sh \ libvirt-guests.sysconf DISTCLEANFILES = @@ -153,21 +152,32 @@ install-data-local: install-init uninstall-local: uninstall-init +install-sysconfig: + mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig + $(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \ + $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests + +uninstall-sysconfig: + rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests + +EXTRA_DIST += libvirt-guests.init.sh + if LIBVIRT_INIT_SCRIPT_RED_HAT -install-init: libvirt-guests.init +install-init: libvirt-guests.init install-sysconfig mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d $(INSTALL_SCRIPT) libvirt-guests.init \ $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests - mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig - $(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests -uninstall-init: - rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests +uninstall-init: install-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests BUILT_SOURCES += libvirt-guests.init +else +install-init: +uninstall-init: +endif # LIBVIRT_INIT_SCRIPT_RED_HAT + libvirt-guests.init: libvirt-guests.init.sh $(top_builddir)/config.status $(AM_V_GEN)sed \ -e 's!\@PACKAGE\@!$(PACKAGE)!g' \ @@ -179,11 +189,38 @@ libvirt-guests.init: libvirt-guests.init.sh $(top_builddir)/config.status < $< > $@-t && \ chmod a+x $@-t && \ mv $@-t $@ + + + +EXTRA_DIST += libvirt-guests.service.in + +if LIBVIRT_INIT_SCRIPT_SYSTEMD +install-systemd: libvirt-guests.service install-sysconfig + mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/systemd.d + $(INSTALL_SCRIPT) libvirt-guests.service \ + $(DESTDIR)$(sysconfdir)/rc.d/systemd.d/libvirt-guests + +uninstall-systemd: install-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/systemd.d/libvirt-guests + +BUILT_SOURCES += libvirt-guests.service + else -install-init: -uninstall-init: -libvirt-guests.init: -endif # LIBVIRT_INIT_SCRIPT_RED_HAT +install-systemd: +uninstall-systemd: +endif # LIBVIRT_INIT_SCRIPT_SYSTEMD + +libvirt-guests.service: libvirt-guests.service.in $(top_builddir)/config.status + $(AM_V_GEN)sed \ + -e 's!\@PACKAGE\@!$(PACKAGE)!g' \ + -e 's!\@bindir\@!$(bindir)!g' \ + -e 's!\@localedir\@!$(localedir)!g' \ + -e 's!\@localstatedir\@!$(localstatedir)!g' \ + -e 's!\@sbindir\@!$(sbindir)!g' \ + -e 's!\@sysconfdir\@!$(sysconfdir)!g' \ + < $< > $@-t && \ + chmod a+x $@-t && \ + mv $@-t $@ CLEANFILES = $(bin_SCRIPTS) diff --git a/tools/libvirt-guests.service.in b/tools/libvirt-guests.service.in new file mode 100644 index 0000000..bc63e91 --- /dev/null +++ b/tools/libvirt-guests.service.in @@ -0,0 +1,13 @@ +[Unit] +Description=Suspend Active Libvirt Guests +After=syslog.target network.target + +[Service] +EnvironmentFile=-/etc/sysconfig/libvirt-guests +# Hack just call traditional service until we factor +# out the code +ExecStart=/etc/init.d/libvirt-guests start +ExecStop=/etc/init.d/libvirt-guests stop + +[Install] +WantedBy=multi-user.target -- 1.7.6.4

13 years

2
2
0 / 0

[libvirt] compile fail on FreeBSD

by Eric Blake

This failure on FreeBSD 8.2 popped up this week, and I suspect Dan's virnetdev refactoring, but haven't had time to further investigate and fix it: util/virnetdev.c: In function 'virNetDevExists': util/virnetdev.c:93: error: storage size of 'ifr' isn't known util/virnetdev.c:95: warning: implicit declaration of function 'virNetDevSetupControl' and so on. Probably some conditional compilation going wrong when on a non-Linux machine. -- Eric Blake eblake(a)redhat.com +1-801-349-2682 Libvirt virtualization library http://libvirt.org

13 years

3
5
0 / 0

[libvirt] Non-zero constant warning on RHEL 6.1 with 0.9.7

by Justin Clift

Hi guys, Just checking 0.9.7 on RHEL 6.1 x86_64. Noticed this when compiling with make -j 3: make[3]: Entering directory `/home/jc/git_repos/libvirt/src' CC libvirt_util_la-bitmap.lo CC libvirt_util_la-authhelper.lo CC libvirt_util_la-bridge.lo CC libvirt_util_la-buf.lo CC libvirt_util_la-command.lo util/buf.c: In function 'virBufferEscape': util/buf.c:469: warning: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] ... CC libvirt_lxc-command.o util/buf.c: In function 'virBufferEscape': util/buf.c:469: warning: logical '&&' with non-zero constant will always evaluate as true [-Wlogical-op] Obviously not fatal, but it figured someone might want to keep things warning free. :) Regards and best wishes, Justin Clift -- Aeolus Community Manager http://www.aeolusproject.org

13 years

5
12
0 / 0

[libvirt] network route collision only checked IPv4 addr

by Jenna Johnson

folks, Noticed that in function "networkStartNetworkVirtual" only have IPv4 addr checked in "networkCheckRouteCollision",will it be a problem that we don't check IPv6 addr?

13 years

2
1
0 / 0

[libvirt] [PATCH 0/6] Handle non-blocking I/O in client send

by Daniel P. Berrange

This is an update to https://www.redhat.com/archives/libvir-list/2011-November/msg00339.html I pulled out alot of the generic cleanup to make the last hard bit easier to review

13 years

2
13
0 / 0

Re: [libvirt] [Qemu-devel] qemu and qemu.git -> Migration + disk stress introduces qcow2 corruptions

by Anthony Liguori

On 11/10/2011 02:55 AM, Avi Kivity wrote: > On 11/09/2011 07:35 PM, Anthony Liguori wrote: >> On 11/09/2011 11:02 AM, Avi Kivity wrote: >>> On 11/09/2011 06:39 PM, Anthony Liguori wrote: >>>> >>>> Migration with qcow2 is not a supported feature for 1.0. Migration is >>>> only supported with raw images using coherent shared storage[1]. >>>> >>>> [1] NFS is only coherent with close-to-open which right now is not >>>> good enough for migration. >>> >>> Say what? >> >> Due to block format probing, we read at least the first sector of the >> disk during start up. >> >> Strictly going by what NFS guarantees, since we don't open on the >> destination *after* as close on the source, we aren't guaranteed to >> see what's written by the source. >> >> In practice, because of block format probing, unless we're using >> cache=none, the first sector can be out of sync with the source on the >> destination. If you use cache=none on a Linux client with at least a >> Linux NFS server, you should be relatively safe. >> > > IMO, this should be a release blocker. qemu 1.0 only supporting > migration on enterprise storage? > > If we have to delay the release for a month to get it right, we should. > Not that I think we have to. > Adding libvirt to the discussion. What does libvirt actually do in the monitor prior to migration completing on the destination? The least invasive way of doing delayed open of block devices is probably to make -incoming create a monitor and run a main loop before the block devices (and full device model) is initialized. Since this isolates the changes strictly to migration, I'd feel okay doing this for 1.0 (although it might need to be in the stable branch). I know a monitor can run like this as I've done it before but some of the commands will not behave as expected so it's pretty important to be comfortable with what commands are actually being used in this mode. Regards, Anthony Liguori

13 years

7
36
0 / 0

[libvirt] listDomains() not working on Xen

by PREETHI RAMESH

Hey all, I've been trying to make listDomains() work on Xen but it simply returns an array of null values. Also, while displaying the length of the array returned by listDomains(). Upon using the same function in KVM, I'm able to retrieve the complete array of active machines. I'm positive that active Xen machines are running(cross checked it with xm list). I've been posting this for quite sometime now but haven't received any reply which could debug my code. I'd really appreciate it if someone could help me. Thanks, P Ramesh

13 years

3
2
0 / 0

[libvirt] [PATCH] Add support for systemd init service

by Daniel P. Berrange

From: "Daniel P. Berrange" <berrange(a)redhat.com> This patch adds support for a systemd init service for libvirtd and libvirt-guests. The libvirtd.service is *not* written to use socket activation, since we want libvirtd to start on boot so it can do guest auto-start. The libvirt-guests.service is pretty lame, just exec'ing the original init script for now. Ideally we would factor out the functionality, into some shared tool. Instead of ./configure --with-init-script=redhat You can now do ./configure --with-init-script=systemd Or better still: ./configure --with-init-script=systemd+redhat * configure.ac: Add systemd, and systemd+redhat options to --with-init-script option * daemon/Makefile.am: Install systemd services * daemon/libvirtd.sysconf: Add note about unused env variable with systemd * daemon/libvirtd.service.in: libvirtd systemd service unit * libvirt.spec.in: Add scripts to installing systemd services and migrating from legacy init scripts * tools/Makefile.am: Install systemd services * tools/libvirt-guests.init.sh: Rename to tools/libvirt-guests.init.in * tools/libvirt-guests.service.in: systemd service unit --- configure.ac | 32 +++++-- daemon/.gitignore | 1 + daemon/Makefile.am | 77 ++++++++++++----- daemon/libvirtd.service.in | 20 ++++ daemon/libvirtd.sysconf | 3 + libvirt.spec.in | 93 +++++++++++++++++++- po/POTFILES.in | 2 +- tools/Makefile.am | 63 +++++++++++--- ...bvirt-guests.init.sh => libvirt-guests.init.in} | 0 tools/libvirt-guests.service.in | 13 +++ 10 files changed, 257 insertions(+), 47 deletions(-) create mode 100644 daemon/libvirtd.service.in rename tools/{libvirt-guests.init.sh => libvirt-guests.init.in} (100%) create mode 100644 tools/libvirt-guests.service.in diff --git a/configure.ac b/configure.ac index 3b7535e..f155666 100644 --- a/configure.ac +++ b/configure.ac @@ -329,16 +329,30 @@ dnl init script flavor dnl AC_MSG_CHECKING([for init script flavor]) AC_ARG_WITH([init-script], - [AC_HELP_STRING([--with-init-script=@<:@redhat|auto|none@:>@], + [AC_HELP_STRING([--with-init-script=@<:@redhat|systemd|systemd+redhat|upstart|auto|none@:>@], [Style of init script to install @<:@default=auto@:>@])]) -if test "x$with_init_script" = "x" || test "x$with_init_script" = "xauto"; then - if test "$cross_compiling" = yes || test ! -f /etc/redhat-release; then - with_init_script=none - else - with_init_script=redhat - fi -fi -AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test x$with_init_script = xredhat) +init_redhat=no +init_systemd=no +case "$with_init_script" in + systemd+redhat) + init_redhat=yes + init_systemd=yes + ;; + systemd) + init_systemd=yes + ;; + redhat) + init_redhat=yes + ;; + *) + if test "$cross_compiling" != yes && test -f /etc/redhat-release; then + init_redhat=yes + with_init_script=redhat + fi + ;; +esac +AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_RED_HAT], test "$init_redhat" = "yes") +AM_CONDITIONAL([LIBVIRT_INIT_SCRIPT_SYSTEMD], test "$init_systemd" = "yes") AC_MSG_RESULT($with_init_script) dnl RHEL-5 has a peculiar version of Xen, which requires some special casing diff --git a/daemon/.gitignore b/daemon/.gitignore index ab3d093..2873143 100644 --- a/daemon/.gitignore +++ b/daemon/.gitignore @@ -7,6 +7,7 @@ Makefile.in libvirt_qemud libvirtd libvirtd.init +libvirtd.service libvirtd*.logrotate libvirtd.8 libvirtd.8.in diff --git a/daemon/Makefile.am b/daemon/Makefile.am index e8c47ae..92b6b86 100644 --- a/daemon/Makefile.am +++ b/daemon/Makefile.am @@ -170,13 +170,14 @@ policyfile = libvirtd.policy-1 endif endif -install-data-local: install-init install-data-sasl install-data-polkit \ - install-logrotate +install-data-local: install-init install-systemd install-data-sasl install-data-polkit \ + install-logrotate install-sysctl mkdir -p $(DESTDIR)$(localstatedir)/log/libvirt mkdir -p $(DESTDIR)$(localstatedir)/run/libvirt mkdir -p $(DESTDIR)$(localstatedir)/lib/libvirt -uninstall-local:: uninstall-init uninstall-data-sasl uninstall-data-polkit +uninstall-local:: uninstall-init uninstall-systemd uninstall-data-sasl uninstall-data-polkit \ + uninstall-sysctl rmdir $(DESTDIR)$(localstatedir)/log/libvirt || : rmdir $(DESTDIR)$(localstatedir)/run/libvirt || : rmdir $(DESTDIR)$(localstatedir)/lib/libvirt || : @@ -234,25 +235,56 @@ install-logrotate: $(LOGROTATE_CONFS) $(INSTALL_DATA) libvirtd.lxc.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.lxc $(INSTALL_DATA) libvirtd.uml.logrotate $(DESTDIR)$(sysconfdir)/logrotate.d/libvirtd.uml -if LIBVIRT_INIT_SCRIPT_RED_HAT -install-init: libvirtd.init - mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d \ - $(DESTDIR)$(sysconfdir)/sysconfig \ - $(DESTDIR)$(sysconfdir)/sysctl.d - $(INSTALL_SCRIPT) libvirtd.init \ - $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd +install-sysconfig: + mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig $(INSTALL_DATA) $(srcdir)/libvirtd.sysconf \ $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd +uninstall-sysconfig: + rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd + +install-sysctl: + mkdir -p $(DESTDIR)$(sysconfdir)/sysctl.d $(INSTALL_DATA) $(srcdir)/libvirtd.sysctl \ $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd -uninstall-init: - rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirtd \ - $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd +uninstall-sysctl: + rm -f $(DESTDIR)$(sysconfdir)/sysctl.d/libvirtd + +if LIBVIRT_INIT_SCRIPT_RED_HAT BUILT_SOURCES += libvirtd.init +install-init: install-sysconfig libvirtd.init + mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d + $(INSTALL_SCRIPT) libvirtd.init \ + $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd + +uninstall-init: uninstall-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirtd +else +install-init: +uninstall-init: +endif # LIBVIRT_INIT_SCRIPT_RED_HAT + + +EXTRA_DIST += libvirtd.service.in +if LIBVIRT_INIT_SCRIPT_SYSTEMD + +SYSTEMD_UNIT_DIR = /lib/systemd/system +BUILT_SOURCES += libvirtd.service + +install-systemd: install-sysconfig libvirtd.service + mkdir -p $(DESTDIR)$(SYSTEMD_UNIT_DIR) + $(INSTALL_SCRIPT) libvirtd.service \ + $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service + +uninstall-systemd: uninstall-sysconfig + rm -f $(DESTDIR)$(SYSTEMD_UNIT_DIR)/libvirtd.service +else +install-systemd: +uninstall-systemd: +endif # LIBVIRT_INIT_SCRIPT_SYSTEMD + libvirtd.init: libvirtd.init.in $(top_builddir)/config.status $(AM_V_GEN)sed \ -e s!\@localstatedir\@!@localstatedir@!g \ @@ -262,18 +294,21 @@ libvirtd.init: libvirtd.init.in $(top_builddir)/config.status chmod a+x $@-t && \ mv $@-t $@ +libvirtd.service: libvirtd.service.in $(top_builddir)/config.status + $(AM_V_GEN)sed \ + -e s!\@localstatedir\@!@localstatedir@!g \ + -e s!\@sbindir\@!@sbindir@!g \ + -e s!\@sysconfdir\@!@sysconfdir@!g \ + < $< > $@-t && \ + chmod a+x $@-t && \ + mv $@-t $@ + + check-local: $(AM_V_GEN)if test -x '$(AUGPARSE)'; then \ '$(AUGPARSE)' -I $(srcdir) $(srcdir)/test_libvirtd.aug; \ fi -else - -install-init: -uninstall-init: -libvirtd.init: - -endif # LIBVIRT_INIT_SCRIPT_RED_HAT # This must be added last, since functions it provides/replaces # are used by nearly every other library. diff --git a/daemon/libvirtd.service.in b/daemon/libvirtd.service.in new file mode 100644 index 0000000..9661428 --- /dev/null +++ b/daemon/libvirtd.service.in @@ -0,0 +1,20 @@ +# NB we don't use socket activation. When libvirtd starts it will +# spawn any virtual machines registered for autostart. We want this +# to occur on every boot, regardless of whether any client connects +# to a socket. Thus socket activation doesn't have any benefit + +[Unit] +Description=Virtualization daemon +After=syslog.target +After=udev.target +After=avahi.target +After=dbus.target +Before=libvirt-guests.service + +[Service] +EnvironmentFile=-/etc/sysconfig/libvirtd +ExecStart=@sbindir@/libvirtd $LIBVIRTD_ARGS +ExecReload=/bin/kill -HUP $MAINPID + +[Install] +WantedBy=multi-user.target diff --git a/daemon/libvirtd.sysconf b/daemon/libvirtd.sysconf index b730c5e..ab273c8 100644 --- a/daemon/libvirtd.sysconf +++ b/daemon/libvirtd.sysconf @@ -1,4 +1,7 @@ # Override the default config file +# NOTE: This setting is no longer honoured if using +# systemd. Set '--config /etc/libvirt/libvirtd.conf' +# in LIBVIRTD_ARGS instead. #LIBVIRTD_CONFIG=/etc/libvirt/libvirtd.conf # Listen for TCP/IP connections diff --git a/libvirt.spec.in b/libvirt.spec.in index d4e3e17..0379998 100644 --- a/libvirt.spec.in +++ b/libvirt.spec.in @@ -78,6 +78,7 @@ %define with_dtrace 0%{!?_without_dtrace:0} %define with_cgconfig 0%{!?_without_cgconfig:0} %define with_sanlock 0%{!?_without_sanlock:0} +%define with_systemd 0%{!?_without_systemd:0} # Non-server/HV driver defaults which are always enabled %define with_python 0%{!?_without_python:1} @@ -111,6 +112,11 @@ %define with_hyperv 0 %endif +# Although earlier Fedora has systemd, libvirt still used sysvinit +%if 0%{?fedora} >= 17 +%define with_systemd 1 +%endif + # RHEL-5 has restricted QEMU to x86_64 only and is too old for LXC %if 0%{?rhel} == 5 %ifnarch x86_64 @@ -329,7 +335,9 @@ Requires: libcgroup # All build-time requirements BuildRequires: python-devel - +%if %{with_systemd} +BuildRequires: systemd-units +%endif %if %{with_xen} BuildRequires: xen-devel %endif @@ -474,6 +482,13 @@ BuildRequires: nfs-utils # Fedora build root suckage BuildRequires: gawk +%if %{with_systemd} +Requires(post): systemd-units +Requires(post): systemd-sysv +Requires(preun): systemd-units +Requires(postun): systemd-units +%endif + %description Libvirt is a C toolkit to interact with the virtualization capabilities of recent versions of Linux (and other OSes). The main package includes @@ -696,6 +711,13 @@ of recent versions of Linux (and other OSes). %define with_packager --with-packager="%{who}, %{when}, %{where}" %define with_packager_version --with-packager-version="%{release}" +%if %{with_systemd} +# We use 'systemd+redhat', so if someone installs upstart or +# legacy init scripts, they can still start libvirtd, etc +%define init_scripts --with-init_script=systemd+redhat +%else +%define init_scripts --with-init_script=redhat +%endif %configure %{?_without_xen} \ %{?_without_qemu} \ @@ -736,7 +758,7 @@ of recent versions of Linux (and other OSes). %{with_packager_version} \ --with-qemu-user=%{qemu_user} \ --with-qemu-group=%{qemu_group} \ - --with-init-script=redhat \ + %{init_scripts} \ --with-remote-pid-file=%{_localstatedir}/run/libvirtd.pid make %{?_smp_mflags} gzip -9 ChangeLog @@ -744,7 +766,7 @@ gzip -9 ChangeLog %install rm -fr %{buildroot} -%makeinstall +%makeinstall SYSTEMD_UNIT_DIR=%{?buildroot:%{buildroot}}%{_unitdir} for i in domain-events/events-c dominfo domsuspend hellolibvirt openauth python xml/nwfilter systemtap do (cd examples/$i ; make clean ; rm -rf .deps .libs Makefile Makefile.in) @@ -893,6 +915,13 @@ do done %endif +%if %{with_systemd} +if [ $1 -eq 1 ] ; then + # Initial installation + /bin/systemctl enable libvirtd.service >/dev/null 2>&1 || : + /bin/systemctl enable cgconfig.service >/dev/null 2>&1 || : +fi +%else %if %{with_cgconfig} # Starting with Fedora 16, systemd automounts all cgroups, and cgconfig is # no longer a necessary service. @@ -908,25 +937,64 @@ if [ "$1" -ge "1" ]; then /sbin/service libvirtd condrestart > /dev/null 2>&1 fi %endif +%endif %preun %if %{with_libvirtd} +%if %{with_systemd} +if [ $1 -eq 0 ] ; then + # Package removal, not upgrade + /bin/systemctl --no-reload disable libvirtd.service > /dev/null 2>&1 || : + /bin/systemctl stop libvirtd.service > /dev/null 2>&1 || : +fi +%else if [ $1 = 0 ]; then /sbin/service libvirtd stop 1>/dev/null 2>&1 /sbin/chkconfig --del libvirtd fi %endif +%endif + +%postun +%if %{with_libvirtd} +%if %{with_systemd} +/bin/systemctl daemon-reload >/dev/null 2>&1 || : +if [ $1 -ge 1 ] ; then + # Package upgrade, not uninstall + /bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : +fi +%endif +%endif + +%if %{with_libvirtd} +%if %{with_systemd} +%triggerun -- libvirt < 0.9.4 +%{_bindir}/systemd-sysv-convert --save libvirtd >/dev/null 2>&1 ||: + +# If the package is allowed to autostart: +/bin/systemctl --no-reload enable libvirtd.service >/dev/null 2>&1 ||: + +# Run these because the SysV package being removed won't do them +/sbin/chkconfig --del libvirtd >/dev/null 2>&1 || : +/bin/systemctl try-restart libvirtd.service >/dev/null 2>&1 || : +%endif +%endif %preun client +%if %{with_systemd} +%else if [ $1 = 0 ]; then /sbin/chkconfig --del libvirt-guests rm -f /var/lib/libvirt/libvirt-guests fi +%endif %post client /sbin/ldconfig +%if %{with_systemd} +%else /sbin/chkconfig --add libvirt-guests if [ $1 -ge 1 ]; then level=$(/sbin/runlevel | /bin/cut -d ' ' -f 2) @@ -937,9 +1005,22 @@ if [ $1 -ge 1 ]; then /sbin/service libvirt-guests start > /dev/null 2>&1 || true fi fi +%endif %postun client -p /sbin/ldconfig +%if %{with_systemd} +%triggerun client -- libvirt < 0.9.4 +%{_bindir}/systemd-sysv-convert --save libvirt-guests >/dev/null 2>&1 ||: + +# If the package is allowed to autostart: +/bin/systemctl --no-reload enable libvirt-guests.service >/dev/null 2>&1 ||: + +# Run these because the SysV package being removed won't do them +/sbin/chkconfig --del libvirt-guests >/dev/null 2>&1 || : +/bin/systemctl try-restart libvirt-guests.service >/dev/null 2>&1 || : +%endif + %if %{with_libvirtd} %files %defattr(-, root, root) @@ -957,6 +1038,9 @@ fi %{_sysconfdir}/libvirt/nwfilter/*.xml %{_sysconfdir}/rc.d/init.d/libvirtd +%if %{with_systemd} +%{_unitdir}/libvirtd.service +%endif %doc daemon/libvirtd.upstart %config(noreplace) %{_sysconfdir}/sysconfig/libvirtd %config(noreplace) %{_sysconfdir}/libvirt/libvirtd.conf @@ -1113,6 +1197,9 @@ rm -f $RPM_BUILD_ROOT%{_sysconfdir}/sysctl.d/libvirtd %{_datadir}/libvirt/cpu_map.xml %{_sysconfdir}/rc.d/init.d/libvirt-guests +%if %{with_systemd} +%{_unitdir}/libvirt-guests.service +%endif %config(noreplace) %{_sysconfdir}/sysconfig/libvirt-guests %dir %attr(0755, root, root) %{_localstatedir}/lib/libvirt/ diff --git a/po/POTFILES.in b/po/POTFILES.in index a3685e8..0fd4442 100644 --- a/po/POTFILES.in +++ b/po/POTFILES.in @@ -151,5 +151,5 @@ src/xenapi/xenapi_utils.c src/xenxs/xen_sxpr.c src/xenxs/xen_xm.c tools/console.c -tools/libvirt-guests.init.sh +tools/libvirt-guests.init.in tools/virsh.c diff --git a/tools/Makefile.am b/tools/Makefile.am index c96c7d9..2e8018e 100644 --- a/tools/Makefile.am +++ b/tools/Makefile.am @@ -25,7 +25,6 @@ EXTRA_DIST = \ virt-sanlock-cleanup.in \ virt-sanlock-cleanup.8 \ virsh.pod \ - libvirt-guests.init.sh \ libvirt-guests.sysconf DISTCLEANFILES = @@ -153,22 +152,33 @@ install-data-local: install-init uninstall-local: uninstall-init +install-sysconfig: + mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig + $(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \ + $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests + +uninstall-sysconfig: + rm -f $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests + +EXTRA_DIST += libvirt-guests.init.in + if LIBVIRT_INIT_SCRIPT_RED_HAT -install-init: libvirt-guests.init +install-init: libvirt-guests.init install-sysconfig mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/init.d $(INSTALL_SCRIPT) libvirt-guests.init \ $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests - mkdir -p $(DESTDIR)$(sysconfdir)/sysconfig - $(INSTALL_DATA) $(srcdir)/libvirt-guests.sysconf \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests -uninstall-init: - rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests \ - $(DESTDIR)$(sysconfdir)/sysconfig/libvirt-guests +uninstall-init: install-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/init.d/libvirt-guests BUILT_SOURCES += libvirt-guests.init -libvirt-guests.init: libvirt-guests.init.sh $(top_builddir)/config.status +else +install-init: +uninstall-init: +endif # LIBVIRT_INIT_SCRIPT_RED_HAT + +libvirt-guests.init: libvirt-guests.init.in $(top_builddir)/config.status $(AM_V_GEN)sed \ -e 's!\@PACKAGE\@!$(PACKAGE)!g' \ -e 's!\@bindir\@!$(bindir)!g' \ @@ -179,11 +189,38 @@ libvirt-guests.init: libvirt-guests.init.sh $(top_builddir)/config.status < $< > $@-t && \ chmod a+x $@-t && \ mv $@-t $@ + + + +EXTRA_DIST += libvirt-guests.service.in + +if LIBVIRT_INIT_SCRIPT_SYSTEMD +install-systemd: libvirt-guests.service install-sysconfig + mkdir -p $(DESTDIR)$(sysconfdir)/rc.d/systemd.d + $(INSTALL_SCRIPT) libvirt-guests.service \ + $(DESTDIR)$(sysconfdir)/rc.d/systemd.d/libvirt-guests + +uninstall-systemd: install-sysconfig + rm -f $(DESTDIR)$(sysconfdir)/rc.d/systemd.d/libvirt-guests + +BUILT_SOURCES += libvirt-guests.service + else -install-init: -uninstall-init: -libvirt-guests.init: -endif # LIBVIRT_INIT_SCRIPT_RED_HAT +install-systemd: +uninstall-systemd: +endif # LIBVIRT_INIT_SCRIPT_SYSTEMD + +libvirt-guests.service: libvirt-guests.service.in $(top_builddir)/config.status + $(AM_V_GEN)sed \ + -e 's!\@PACKAGE\@!$(PACKAGE)!g' \ + -e 's!\@bindir\@!$(bindir)!g' \ + -e 's!\@localedir\@!$(localedir)!g' \ + -e 's!\@localstatedir\@!$(localstatedir)!g' \ + -e 's!\@sbindir\@!$(sbindir)!g' \ + -e 's!\@sysconfdir\@!$(sysconfdir)!g' \ + < $< > $@-t && \ + chmod a+x $@-t && \ + mv $@-t $@ CLEANFILES = $(bin_SCRIPTS) diff --git a/tools/libvirt-guests.init.sh b/tools/libvirt-guests.init.in similarity index 100% rename from tools/libvirt-guests.init.sh rename to tools/libvirt-guests.init.in diff --git a/tools/libvirt-guests.service.in b/tools/libvirt-guests.service.in new file mode 100644 index 0000000..bc63e91 --- /dev/null +++ b/tools/libvirt-guests.service.in @@ -0,0 +1,13 @@ +[Unit] +Description=Suspend Active Libvirt Guests +After=syslog.target network.target + +[Service] +EnvironmentFile=-/etc/sysconfig/libvirt-guests +# Hack just call traditional service until we factor +# out the code +ExecStart=/etc/init.d/libvirt-guests start +ExecStop=/etc/init.d/libvirt-guests stop + +[Install] +WantedBy=multi-user.target -- 1.7.6.4

13 years

3
4
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel November 2011