[libvirt] Enable authentication for all virConnectOpen calls in virsh
by Matthias Bolte
Hello,
virsh opens connections in three places (init, connect, migrate) but
only connections initiated from the command line (the -c option) are
opened with authentication.
The attached patch enables the two other places to use authentication too.
Ciao
Matthias
15 years, 8 months
[libvirt] libvirt authorization
by Scott Beardsley
Is there any authorization mechanism in libvirt? I've got TLS going so
that only those with a cert signed by my CA are allowed in, but there
appears to be no way for me to only allow them access to certain VMs.
Can I limit folks to specific VMs or VNC ports? Ideally I can allow
access only to those VMs which they own.
This is really not _that_ big of a deal because I'm advising all my
admins to log out of their systems but it would give me and them peace
of mind.
Thoughts?
Scott
15 years, 8 months
[libvirt] Problem with remote xend over ssh tunnel
by waheed iqbal
Hi,
I am able to connect remote xend using http but whenever I try to connect remote machine using "virsh -c xen+ssh://root@...../ list" I found following error:
libvir: Remote error : socket closed unexpectedly
error: failed to connect to the hypervisor
libvirtd is running on both systems and netcat is also installed on both machines.
Debug log is:
node2:/home/waheed# export LIBVIRT_DEBUG=1
node2:/home/waheed# virsh -c xen+ssh://root@node1/ list
DEBUG: libvirt.c: virInitialize (register drivers)
DEBUG: libvirt.c: virRegisterDriver (registering Test as driver 0)
DEBUG: libvirt.c: virRegisterNetworkDriver (registering Test as network driver 0)
DEBUG: libvirt.c: virRegisterStorageDriver (registering Test as storage driver 0)
DEBUG: xen_internal.c: xenHypervisorInit (Using new hypervisor call: 30002
)
DEBUG: xen_internal.c: xenHypervisorInit (Using hypervisor call v2, sys ver6 dom ver5
)
DEBUG: libvirt.c: virRegisterDriver (registering Xen as driver 1)
DEBUG: libvirt.c: virRegisterDriver (registering OPENVZ as driver 2)
DEBUG: libvirt.c: virRegisterDriver (registering remote as driver 3)
DEBUG: libvirt.c: virRegisterNetworkDriver (registering remote as network driver 1)
DEBUG: libvirt.c: virRegisterStorageDriver (registering remote as storage driver 1)
DEBUG: libvirt.c: virRegisterDeviceMonitor (registering remote as device driver 0)
DEBUG: libvirt.c: virConnectOpenAuth (name=xen+ssh://root@node1/, auth=0xb7ed8be0, flags=0)
DEBUG: libvirt.c: do_open (name "xen+ssh://root@node1/" to URI components:
scheme xen+ssh
opaque (null)
authority (null)
server node1
user root
port 0
path /
)
DEBUG: libvirt.c: do_open (trying driver 0 (Test) ...)
DEBUG: libvirt.c: do_open (driver 0 Test returned DECLINED)
DEBUG: libvirt.c: do_open (trying driver 1 (Xen) ...)
DEBUG: libvirt.c: do_open (driver 1 Xen returned DECLINED)
DEBUG: libvirt.c: do_open (trying driver 2 (OPENVZ) ...)
DEBUG: libvirt.c: do_open (driver 2 OPENVZ returned DECLINED)
DEBUG: libvirt.c: do_open (trying driver 3 (remote) ...)
DEBUG: remote_internal.c: doRemoteOpen (proceeding with name = xen:///)
DEBUG: util.c: virExec (ssh -p 22 -l root node1 nc -U /var/run/libvirt/libvirt-sock)
root@node1's password:
libvir: Remote error : socket closed unexpectedly
DEBUG: libvirt.c: do_open (driver 3 remote returned ERROR)
DEBUG: datatypes.c: virUnrefConnect (unref connection 0x9818de0 1)
DEBUG: datatypes.c: virReleaseConnect (release connection 0x9818de0)
error: failed to connect to the hypervisor
Please help me to identify problem.
Regards
Waheed
15 years, 8 months
[libvirt] Fix compile errors in 'safezero()' functions in util.c
by Maximilian Wilhelm
Hi!
Fix compile errors in 'safezero()' functions in util.c
Commit 70e7672184ff639856d5f2f3bf7849464031dff9 introduced some
compile errors because of the unsued 'flags' parameter in all three
version of the 'safezero()' function.
Signed-Off-By: Maximilian Wilhelm <max(a)rfc2324.org>
The attached patch fixes this.
Ciao
Max
--
Follow the white penguin.
15 years, 8 months
[libvirt] [RFC][PATCH]: Secure migration
by Chris Lalancette
All,
Attached is a *very* rough first draft of the secure migration code I'm
working on. This is in no way ready for merge. That being said, this
demonstrates the basic idea that I'm pursuing, and I've actually been able to
perform a KVM secure live migrate using this. Before I go and finish polishing
it up, though, I wanted to make sure there wasn't anything fundamentally wrong
with the approach. So, in that vein, comments are appreciated.
Thanks,
--
Chris Lalancette
15 years, 8 months
[libvirt] PATCH: Be more flexible in emulator choice on x86 archs
by Daniel P. Berrange
Currently we are pretty strict about what emulator binary we allow for
QEMU guests on x86 arches. In particular, for arch+domain type combos:
- i686+qemu must use 'qemu' binary
- x86_64+qemu must use 'qemu-system-x86_64' binary
- kvm must use 'qemu-kvm' or 'kvm' binaries
- i686+kvm on x86_64 host is not allowed
These restrictions are overkill because
- i686+qemu could use 'qemu-system-x86_64' if '-cpu qemu32' is added
- i686+qemu could use 'qemu-kvm' if '-cpu qemu32 -no-kvm' is added
- x86_64+qemu could use 'qemu-kvm' if '-no-kvm' is added
- i686+kvm on x86_64 host can be used if '-cpu qemu32' is added
This patch makes QEMU driver more flexible in this way when setting up
its capabilities information. It also makes it aware of the -no-kvm
and -cpu flag, using them where required by the os type + arch + emulator
combinations specified in the guest XML.
This should finally remove the confusion where a user in virt-manager
selectrs 'i686' and then wonders why we've disallowed choice of 'kvm'.
It also fixes 'virsh version' when only qemu-kvm is installed.
The matrix should now work thus:
1. qemu, qemu-system-x86_64, qemu-kvm all available
qemu+i686 => qemu
qemu+x86_64 => qemu-system-x86_64
kvm+i686 => qemu-kvm -cpu qemu32
kvm+x86_64 => qemu-kvm
2. qemu, qemu-kvm available
qemu+i686 => qemu
qemu+x86_64 => qemu-kvm -no-kvm
kvm+i686 => qemu-kvm -cpu qemu32
kvm+x86_64 => qemu-kvm
3. qemu-system-x86_64, qemu-kvm available
qemu+i686 => qemu-system-x86_64 -cpu qemu32
qemu+x86_64 => qemu-system-x86_64
kvm+i686 => qemu-kvm -cpu qemu32
kvm+x86_64 => qemu-kvm
4. qemu-kvm available
qemu+i686 => qemu-kvm -no-kvm -cpu qemu32
qemu+x86_64 => qemu-kvm -no-kvm
kvm+i686 => qemu-kvm -cpu qemu32
kvm+x86_64 => qemu-kvm
The only real remaining problem is that we don't cope with scenario
where the KVM enabled binary is called 'qemu-system-x64_64' instead
of 'qemu-kvm' or 'kvm'.
Regards,
Daniel
Index: src/qemu_conf.c
===================================================================
RCS file: /data/cvs/libvirt/src/qemu_conf.c,v
retrieving revision 1.138
diff -u -p -r1.138 qemu_conf.c
--- src/qemu_conf.c 16 Mar 2009 13:54:26 -0000 1.138
+++ src/qemu_conf.c 16 Mar 2009 17:53:20 -0000
@@ -211,6 +211,7 @@ struct qemu_arch_info {
const char *const *machines;
int nmachines;
const char *binary;
+ const char *altbinary;
const struct qemu_feature_flags *flags;
int nflags;
};
@@ -231,24 +232,24 @@ static const struct qemu_feature_flags c
/* The archicture tables for supported QEMU archs */
static const struct qemu_arch_info const arch_info_hvm[] = {
{ "i686", 32, arch_info_hvm_x86_machines, 2,
- "/usr/bin/qemu", arch_info_i686_flags, 4 },
+ "/usr/bin/qemu", "/usr/bin/qemu-system-x86_64", arch_info_i686_flags, 4 },
{ "x86_64", 64, arch_info_hvm_x86_machines, 2,
- "/usr/bin/qemu-system-x86_64", arch_info_x86_64_flags, 2 },
+ "/usr/bin/qemu-system-x86_64", NULL, arch_info_x86_64_flags, 2 },
{ "mips", 32, arch_info_hvm_mips_machines, 1,
- "/usr/bin/qemu-system-mips", NULL, 0 },
+ "/usr/bin/qemu-system-mips", NULL, NULL, 0 },
{ "mipsel", 32, arch_info_hvm_mips_machines, 1,
- "/usr/bin/qemu-system-mipsel", NULL, 0 },
+ "/usr/bin/qemu-system-mipsel", NULL, NULL, 0 },
{ "sparc", 32, arch_info_hvm_sparc_machines, 1,
- "/usr/bin/qemu-system-sparc", NULL, 0 },
+ "/usr/bin/qemu-system-sparc", NULL, NULL, 0 },
{ "ppc", 32, arch_info_hvm_ppc_machines, 3,
- "/usr/bin/qemu-system-ppc", NULL, 0 },
+ "/usr/bin/qemu-system-ppc", NULL, NULL, 0 },
};
static const struct qemu_arch_info const arch_info_xen[] = {
{ "i686", 32, arch_info_xen_x86_machines, 1,
- "/usr/bin/xenner", arch_info_i686_flags, 4 },
+ "/usr/bin/xenner", NULL, arch_info_i686_flags, 4 },
{ "x86_64", 64, arch_info_xen_x86_machines, 1,
- "/usr/bin/xenner", arch_info_x86_64_flags, 2 },
+ "/usr/bin/xenner", NULL, arch_info_x86_64_flags, 2 },
};
static int
@@ -257,43 +258,62 @@ qemudCapsInitGuest(virCapsPtr caps,
const struct qemu_arch_info *info,
int hvm) {
virCapsGuestPtr guest;
- int i, haskvm, hasbase, samearch;
+ int i;
+ int hasbase = 0;
+ int hasaltbase = 0;
+ int haskvm = 0;
+ int haskqemu = 0;
const char *kvmbin = NULL;
- /* Check for existance of base emulator */
+ /* Check for existance of base emulator, or alternate base
+ * which can be used with magic cpu choice
+ */
hasbase = (access(info->binary, X_OK) == 0);
+ hasaltbase = (access(info->altbinary, X_OK) == 0);
- samearch = STREQ(info->arch, hostmachine);
- if (samearch) {
+ /* Can use acceleration for KVM/KQEMU if
+ * - host & guest arches match
+ * Or
+ * - hostarch is x86_64 and guest arch is i686
+ * The latter simply needs "-cpu qemu32"
+ */
+ if (STREQ(info->arch, hostmachine) ||
+ (STREQ(hostmachine, "x86_64") && STREQ(info->arch, "i686"))) {
const char *const kvmbins[] = { "/usr/bin/qemu-kvm", /* Fedora */
"/usr/bin/kvm" }; /* Upstream .spec */
for (i = 0; i < ARRAY_CARDINALITY(kvmbins); ++i) {
- if ((haskvm = (access(kvmbins[i], X_OK) == 0))) {
+ if (access(kvmbins[i], X_OK) == 0 &&
+ access("/dev/kvm", F_OK) == 0) {
+ haskvm = 1;
kvmbin = kvmbins[i];
break;
}
}
- } else {
- haskvm = 0;
+
+ if (access("/dev/kqemu", F_OK) == 0)
+ haskqemu = 1;
}
- if (!hasbase && !haskvm)
+
+ if (!hasbase && !hasaltbase && !haskvm)
return 0;
+ /* We register kvm as the base emulator too, since we can
+ * just give -no-kvm to disable acceleration if required */
if ((guest = virCapabilitiesAddGuest(caps,
hvm ? "hvm" : "xen",
info->arch,
info->wordsize,
- info->binary,
+ (hasbase ? info->binary :
+ (hasaltbase ? info->altbinary : kvmbin)),
NULL,
info->nmachines,
info->machines)) == NULL)
return -1;
if (hvm) {
- if (hasbase &&
- virCapabilitiesAddGuestDomain(guest,
+ if (virCapabilitiesAddGuestDomain(guest,
"qemu",
NULL,
NULL,
@@ -301,27 +321,23 @@ qemudCapsInitGuest(virCapsPtr caps,
NULL) == NULL)
return -1;
- /* If guest & host match, then we can accelerate */
- if (samearch) {
- if (access("/dev/kqemu", F_OK) == 0 &&
- virCapabilitiesAddGuestDomain(guest,
- "kqemu",
- NULL,
- NULL,
- 0,
- NULL) == NULL)
- return -1;
+ if (haskqemu &&
+ virCapabilitiesAddGuestDomain(guest,
+ "kqemu",
+ NULL,
+ NULL,
+ 0,
+ NULL) == NULL)
+ return -1;
- if (access("/dev/kvm", F_OK) == 0 &&
- haskvm &&
- virCapabilitiesAddGuestDomain(guest,
- "kvm",
- kvmbin,
- NULL,
- 0,
- NULL) == NULL)
- return -1;
- }
+ if (haskvm &&
+ virCapabilitiesAddGuestDomain(guest,
+ "kvm",
+ kvmbin,
+ NULL,
+ 0,
+ NULL) == NULL)
+ return -1;
} else {
if (virCapabilitiesAddGuestDomain(guest,
"kvm",
@@ -363,12 +379,14 @@ virCapsPtr qemudCapsInit(void) {
if (virCapsInitNUMA(caps) < 0)
goto no_memory;
+ /* First the pure HVM guests */
for (i = 0 ; i < ARRAY_CARDINALITY(arch_info_hvm) ; i++)
if (qemudCapsInitGuest(caps,
utsname.machine,
&arch_info_hvm[i], 1) < 0)
goto no_memory;
+ /* Then possibly the Xen paravirt guests (ie Xenner */
if (access("/usr/bin/xenner", X_OK) == 0 &&
access("/dev/kvm", F_OK) == 0) {
for (i = 0 ; i < ARRAY_CARDINALITY(arch_info_xen) ; i++)
@@ -430,6 +448,8 @@ int qemudExtractVersionInfo(const char *
if (strstr(help, "-no-kqemu"))
flags |= QEMUD_CMD_FLAG_KQEMU;
+ if (strstr(help, "-no-kvm"))
+ flags |= QEMUD_CMD_FLAG_KVM;
if (strstr(help, "-no-reboot"))
flags |= QEMUD_CMD_FLAG_NO_REBOOT;
if (strstr(help, "-name"))
@@ -749,6 +769,7 @@ int qemudBuildCommandLine(virConnectPtr
char boot[VIR_DOMAIN_BOOT_LAST];
struct utsname ut;
int disableKQEMU = 0;
+ int disableKVM = 0;
int qargc = 0, qarga = 0;
const char **qargv = NULL;
int qenvc = 0, qenva = 0;
@@ -757,6 +778,7 @@ int qemudBuildCommandLine(virConnectPtr
char uuid[VIR_UUID_STRING_BUFLEN];
char domid[50];
char *pidfile;
+ const char *cpu = NULL;
uname_normalize(&ut);
@@ -789,9 +811,16 @@ int qemudBuildCommandLine(virConnectPtr
}
}
+ emulator = vm->def->emulator;
+ if (!emulator)
+ emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
+ if (!emulator)
+ return -1;
+
+
/* Need to explicitly disable KQEMU if
* 1. Arch matches host arch
- * 2. Guest is 'qemu'
+ * 2. Guest domain is 'qemu'
* 3. The qemu binary has the -no-kqemu flag
*/
if ((qemuCmdFlags & QEMUD_CMD_FLAG_KQEMU) &&
@@ -799,6 +828,34 @@ int qemudBuildCommandLine(virConnectPtr
vm->def->virtType == VIR_DOMAIN_VIRT_QEMU)
disableKQEMU = 1;
+ /* Need to explicitly disable KVM if
+ * 1. Arch matches host arch
+ * 2. Guest domain is 'qemu'
+ * 3. The qemu binary has the -no-kvm flag
+ */
+ if ((qemuCmdFlags & QEMUD_CMD_FLAG_KVM) &&
+ STREQ(ut.machine, vm->def->os.arch) &&
+ vm->def->virtType == VIR_DOMAIN_VIRT_QEMU)
+ disableKVM = 1;
+
+ /*
+ * Need to force a 32-bit guest CPU type if
+ *
+ * 1. guest OS is i686
+ * 2. host OS is x86_64
+ * 3. emulator is qemu-kvm or kvm
+ *
+ * Or
+ *
+ * 1. guest OS is i686
+ * 2. emulator is qemu-system-x86_64
+ */
+ if (STREQ(vm->def->os.arch, "i686") &&
+ ((STREQ(ut.machine, "x86_64") &&
+ strstr(emulator, "kvm")) ||
+ strstr(emulator, "x86_64")))
+ cpu = "qemu32";
+
#define ADD_ARG_SPACE \
do { \
if (qargc == qarga) { \
@@ -887,12 +944,6 @@ int qemudBuildCommandLine(virConnectPtr
ADD_ENV_COPY("LOGNAME");
ADD_ENV_COPY("TMPDIR");
- emulator = vm->def->emulator;
- if (!emulator)
- emulator = virDomainDefDefaultEmulator(conn, vm->def, driver->caps);
- if (!emulator)
- return -1;
-
ADD_ARG_LIT(emulator);
ADD_ARG_LIT("-S");
@@ -904,9 +955,15 @@ int qemudBuildCommandLine(virConnectPtr
ADD_ARG_LIT("-M");
ADD_ARG_LIT(vm->def->os.machine);
}
+ if (cpu) {
+ ADD_ARG_LIT("-cpu");
+ ADD_ARG_LIT(cpu);
+ }
if (disableKQEMU)
ADD_ARG_LIT("-no-kqemu");
+ if (disableKVM)
+ ADD_ARG_LIT("-no-kvm");
ADD_ARG_LIT("-m");
ADD_ARG_LIT(memory);
ADD_ARG_LIT("-smp");
Index: src/qemu_conf.h
===================================================================
RCS file: /data/cvs/libvirt/src/qemu_conf.h,v
retrieving revision 1.58
diff -u -p -r1.58 qemu_conf.h
--- src/qemu_conf.h 16 Mar 2009 13:54:26 -0000 1.58
+++ src/qemu_conf.h 16 Mar 2009 17:53:20 -0000
@@ -55,6 +55,7 @@ enum qemud_cmd_flags {
QEMUD_CMD_FLAG_MIGRATE_QEMU_TCP = (1 << 10), /* New migration syntax after merge to QEMU with TCP transport */
QEMUD_CMD_FLAG_MIGRATE_QEMU_EXEC = (1 << 11), /* New migration syntax after merge to QEMU with EXEC transport */
QEMUD_CMD_FLAG_DRIVE_CACHE_V2 = (1 << 12), /* Is the cache= flag wanting new v2 values */
+ QEMUD_CMD_FLAG_KVM = (1 << 13), /* Whether KVM is compiled in */
};
/* Main driver state */
Index: src/qemu_driver.c
===================================================================
RCS file: /data/cvs/libvirt/src/qemu_driver.c,v
retrieving revision 1.218
diff -u -p -r1.218 qemu_driver.c
--- src/qemu_driver.c 16 Mar 2009 17:16:04 -0000 1.218
+++ src/qemu_driver.c 16 Mar 2009 17:53:20 -0000
@@ -1733,6 +1733,7 @@ qemudMonitorCommand(const virDomainObjPt
static int qemudProbe(void)
{
if ((virFileExists("/usr/bin/qemu")) ||
+ (virFileExists("/usr/bin/qemu-system-x86_64")) ||
(virFileExists("/usr/bin/qemu-kvm")) ||
(virFileExists("/usr/bin/kvm")) ||
(virFileExists("/usr/bin/xenner")))
@@ -1749,10 +1750,10 @@ static virDrvOpenStatus qemudOpen(virCon
if (qemu_driver == NULL)
goto decline;
- if (!qemudProbe())
- goto decline;
-
if (conn->uri == NULL) {
+ if (!qemudProbe())
+ goto decline;
+
conn->uri = xmlParseURI(uid ? "qemu:///session" : "qemu:///system");
if (!conn->uri) {
virReportOOMError(conn);
--
|: Red Hat, Engineering, London -o- http://people.redhat.com/berrange/ :|
|: http://libvirt.org -o- http://virt-manager.org -o- http://ovirt.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: GnuPG: 7D3B9505 -o- F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 :|
15 years, 8 months
[libvirt] TLS for libvirt remote access
by Zvi Dubitzky
After generating TLS certificates for Libvirt remote access , I test the
certificates
by running pki_check.sh and get the following message :
The CA certificate and the client certificate do not match
What can cause this message ?
I guess this is a problem as I am trying to access remotely the host
machine and fail
with a message of :libvir: Remote error : Connection refused
That happens even if I use a client and server on the same machine and try
: sudo virsh -c qemu://localhost/defualt.
I am using libvirt 0.6.
can I get first a connection with no certificate/encryption by using URI =
qemu+tcp://... by making the needed change on the libvirtd.conf file
on the server side ? that did not work either
I followed the instructions in the Libvirt Web Site (generate a CA
private key and certificate then the client and server keys and
certificates and copy them to appropriate locations),. Also restarted the
libvirtd with the --listen --verbose flags on the server side
what can be wrong with my steps ?
Zvi Dubitzky
Virtualization and System Architecture Email:dubi@il.ibm.com
IBM Haifa Research Laboratory Phone: +972-4-8296182
Haifa, 31905, ISRAEL
15 years, 8 months
[libvirt] virDomainGetVcpus error with Fedora 10
by Kaitlin Rupert
Hi,
I'm running Fedora 10 with the following libvirt version: libvirt-0.6.0-3
I'm calling virDomainGetVcpus() with the following parameters:
virDomainGetVcpus(dom, info, max, NULL, 0); where max = 2 and dom and
info are both non-NULL.
However, I'm getting the following error from libvirt: libvir: Domain
error : invalid argument in virDomainGetVcpus
I tracked this down, and it's failing the if (cpumaps != NULL && maplen
< 1) check in libvirt.c because cpumaps is non-NULL. Which is very
strange because I'm definitely passing a NULL value.
Here's the relevant libvirtd debug:
15:38:07.332: debug : virGetDomain:287 : New hash entry 0x816ab0
15:38:07.332: debug : virDomainGetVcpus:4080 : domain=0x816ab0,
info=0x800530, maxinfo=2, cpumaps=0x7f8fb0, maplen=0
15:38:07.332: error : invalid argument in virDomainGetVcpus
libvir: Domain error : invalid argument in virDomainGetVcpus
15:38:07.332: debug : virDomainFree:1795 : domain=0x816ab0
Has anyone else hit this same issue?
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
15 years, 8 months
