September 2008 - Devel - Libvirt List Archives

[libvirt] virDomainInterfaceStats why is there a size?

by Stefan de Konink

Another simple question, what is the reasoning about the size field in this call. I would really be a happy boy if anyone said: if you put in path == NULL, it will fill your stats structure up to size interfaces. ...but since this is not the case (yet) what is the reason behind it? Stefan

15 years, 11 months

3
2
0 / 0

[libvirt] anyone implementing host device enumeration?

by David Lively

Hi - I'm about to start working on host device enumeration, along the (HAL-ish) lines of what was discussed back in April: https://www.redhat.com/archives/libvir-list/2008-April/msg00005.html I know the xml details haven't been fully fleshed out, but there seems to be agreement that it will be a fairly direct mapping from (a subset of the) HAL info to the details that we need in the xml. Doubtless it will take a while to figure out exactly what subset suffices (and, for that matter, if everything needed is available via HAL ...), but I think the work is well-defined for some of the obvious details (discussed in the above thread) on which there's broad agreement. Is anyone working on such an implementation? Thanks, Dave

16 years

3
37
0 / 0

[libvirt] Live migration sanity checks

by Chris Lalancette

All, One thing that oVirt would like to have (and that might be useful for other users) is a call that would do some basic sanity checking for live migration. This call would go over to the remote libvirtd, do some checks, and return whether we think migration is likely to succeed. Note that I say "likely to succeed", because there are certainly things that can cause migration to fail after we've made checks, but anything is better than what we have today ("try it and pray"). Now, in order for this call to be widely useful, I think we would have to allow the caller to specify *which* of the available checks they would like to perform, and then have some sort of return value that indicated if there are show-stopper problems, or just problems that may cause things to be sub-optimal on the remote side. The caller could then decide what action it wants to take. There is also a corollary to the "is it sane for me to migrate", which is, given two hosts A and B, what's the lowest common denominator I need to run my guest at so that migration will likely be successful between them. This could also be used by management apps to make sure things are configured properly for the guest before ever starting it. The biggest problem with implementing these calls, however, is that there is no comprehensive list of things we should check. This e-mail is an attempt to write down some of the more obvious things we need to check, and to garner discussion of things I might have missed. Once I have a proper list, I'll add it to the TODO page on the libvirt Wiki so it's at least somewhere permanent. Note that we don't have to implement *all* of these as a first go at this; if we leave it open enough, we can add more checks as we go along without breaking compatibility. MIGRATION CRITERIA: 0) Matching hypervisors - seems obvious, but I'm not sure if we have these checks today. Make sure we don't try to migrate Xen to KVM or vice-versa. We also might want to think of at least warning the caller if you try to migrate from a "newer" hypervisor (say, Xen 3.2) to an "older" hypervisor (say, Xen 3.1). That should, in theory, work, but maybe the caller would prefer not to do that if possible. Rich has pointed out that KVM and Xen are accidentally incompatible in libvirt, but we should make it explicit. 1) Matching CPU architectures - also obvious, but as far as I know today, there's no checking for this (well, at least in Xen; I don't know about libvirt). So you can happily attempt to migrate from i386 -> ia64, and watch the fireworks. We also need to make sure you can't migrate x86_64 -> i386. I believe i386 -> x86_64 should work, but this might be hypervisor dependent. 2) Matching CPU vendors - this one isn't a hard requirement; given the things below, we may still be likely to succeed even if we go from AMD to Intel or vice-versa. It still might be useful information for the caller to know. 3) CPU flags - the CPU flags of the destination *must* be a superset of the CPU flags that were presented to the guest at startup. Many OS's and application check for CPU flags once at startup to choose optimized routines, and then never check again; if they happened to select sse3, and sse3 is not there on the destination, then they will (eventually) crash. This is where the CPU masking technology and the lowest common denominator libvirt call can make a big difference. If you make sure to mask some of the CPU flags off of the guest when you are first creating it, then the destination host just needs a superset of the flags that were presented to the guest at bootup, which makes the problem easier. 4) Number of CPUs - generally, you want the destination to have at least one physical CPU for each virtual CPU assigned to the guest. However, I can see use cases where this might not be the case (temporary or emergency migrations). So this would probably be a warning, and the caller can make the choice of whether to proceed. 5a) Memory - non-NUMA -> non-NUMA - fairly straightforward. The destination must have enough memory to fit the guest memory. We might want to do some "extra" checking on the destination to make sure we aren't going to OOM the destination as soon as we arrive. 5b) Memory - non-NUMA -> NUMA - A little trickier. There are no cpusets we have to worry about, since we are coming from non-NUMA, but for absolute best performance, we should try to fit the whole guest into a single NUMA node. Of course, if that node is overloaded, that may be a bad idea. NUMA placement problem, basically. 5c) Memory - NUMA -> non-NUMA - Less tricky. On the destination, all memory is "equally" far away, so no need to worry about cpusets. Just have to make sure that there is enough memory on the destination for the guest. 5d) Memory - NUMA -> NUMA - Tricky, just like case 5b). Need to determine if there is enough memory in the machine first, then check if we can fit the guest in a single node, and also check if we can match the cpuset from the source on the destination. 6a) Networks - at the very least, the destination must have the same bridges configured as the source side. Whether those bridges are hooked to the same physical networks as the source or not is another question, and may be outside the bounds of what we can/should check. 6b) Networks - we need to make sure that the device model on the remote side supports the same devices as the source side. That is, if you have a e1000 nic on the source side, but your destination doesn't support it, you are going to fail the migration. 7a) Disks - we have to make sure that all of the disks on the source side are available on the destination side, at the same paths. To be entirely clear, we have to make sure that the file on the destination side is the *same* file as on the source side, not just a file with the same name. For traditional file-based, the best we can do may be path names. For device names (like LVM, actual disk partitions, etc.), we might be able to take advantage of device enumaration API's and validate that the device info is the same (UUID matching, etc.). 7b) Disks - Additionally, we need to make sure that the device model on the remote side supports the same devices as the source side. That is, if you have a virtio drive on the source side, but your destination host doesn't support virtio on the backend, you are going to fail. (virtio might be a bad example, but there might be further things in the device model in the future that we might not necessarily have on both ends). ------ That's the absolute basic criteria. More esoteric/less thought-out criteria follow: 8) Time skew - this is less thought out at the moment, but if you calibrated your lpj at boot time, and now you migrate to a host with a different clock frequency, your time will run either fast or slow compared to what you expect. Also synchronized vs. unsynchronized TSC could cause issues, etc. 9) PCI-passthrough - this is actually a check on the *source* side. If the guest is using a PCI passthrough device, it *usually* doesn't make sense to live migrate it. On the other hand, it looks like various groups are trying to make this work (with the bonding of a PV NIC to a PCI-passthrough NIC), so we need to keep that in mind, and not necessarily make this a hard failure. 10) MSR's?? - I've thought about this one before, but I'm not sure what the answer is. Unfortunately, MSR's in virtualization are sort of done hodge-podge. That is, some MSR's are emulated for the guests, some MSR's guests have direct control over, and some aren't emulated at all. This one can get ugly fast; it's probably something we want to leave until later. 11) CPUID?? - Not entirely sure about this one; there is a lot of model-specific information encoded in the various CPUID calls (things like cache size, cache line size, etc. etc). However, I don't know if CPUID instructions are trapped-n-emulated under the different hypervisors, or if they are done right on the processor itself. I guess if an OS or application called this at startup, cached the information, and then checked again later it might get upset, but it seems somewhat unlikely. Things that I've missed? Thanks, Chris Lalancette

16 years

6
9
0 / 0

[libvirt] [PATCH] Add .gitignore files

by James Morris

Add .gitignore files to make developing with git easier. These are simply copies of the .cvsignore files. Signed-off-by: James Morris <jmorris(a)namei.org> --- diff --git a/.gitignore b/.gitignore new file mode 100644 index 0000000..5e055a6 --- /dev/null +++ b/.gitignore @@ -0,0 +1,32 @@ +.git +Makefile +aclocal.m4 +autom4te.cache +stamp-h.in +Makefile.in +configure +config.cache +config.h +config.h.in +config.log +config.status +config.guess +config.sub +config.rpath +stamp-h +stamp-h1 +libtool +ltconfig +update.log +libvirt.pc +libvirt.spec +mingw-libvirt.spec +COPYING +m4 +ABOUT-NLS +coverage +results.log +libvirt-*.tar.gz +INSTALL +ltmain.sh +mkinstalldirs diff --git a/build-aux/.gitignore b/build-aux/.gitignore new file mode 100644 index 0000000..096cccb --- /dev/null +++ b/build-aux/.gitignore @@ -0,0 +1,10 @@ +compile +config.guess +config.rpath +config.sub +depcomp +install-sh +ltmain.sh +missing +mkinstalldirs +mktempd diff --git a/docs/.gitignore b/docs/.gitignore new file mode 100644 index 0000000..f284184 --- /dev/null +++ b/docs/.gitignore @@ -0,0 +1,4 @@ +Makefile +Makefile.in +.memdump +apibuild.pyc diff --git a/docs/devhelp/.gitignore b/docs/devhelp/.gitignore new file mode 100644 index 0000000..cc4abab --- /dev/null +++ b/docs/devhelp/.gitignore @@ -0,0 +1,3 @@ +Makefile +Makefile.in +libvirt.devhelp diff --git a/docs/examples/.gitignore b/docs/examples/.gitignore new file mode 100644 index 0000000..5f0e251 --- /dev/null +++ b/docs/examples/.gitignore @@ -0,0 +1,7 @@ +.memdump +Makefile.in +Makefile +.deps +.libs +info1 +suspend diff --git a/docs/examples/python/.gitignore b/docs/examples/python/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/docs/examples/python/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/gnulib/lib/.gitignore b/gnulib/lib/.gitignore new file mode 100644 index 0000000..2849ca9 --- /dev/null +++ b/gnulib/lib/.gitignore @@ -0,0 +1,23 @@ +*.la +*.lo +.deps +.libs +Makefile +Makefile.in +alloca.h +arpa_inet.h +float.h +netinet_in.h +poll.h +stdbool.h +stdint.h +stdio-impl.h +stdio.h +stdlib.h +string.h +sys_select.h +sys_socket.h +sys_stat.h +sys_time.h +unistd.h +wchar.h diff --git a/gnulib/lib/arpa/.gitignore b/gnulib/lib/arpa/.gitignore new file mode 100644 index 0000000..b9013ae --- /dev/null +++ b/gnulib/lib/arpa/.gitignore @@ -0,0 +1 @@ +inet.h diff --git a/gnulib/lib/netinet/.gitignore b/gnulib/lib/netinet/.gitignore new file mode 100644 index 0000000..95f1a2e --- /dev/null +++ b/gnulib/lib/netinet/.gitignore @@ -0,0 +1 @@ +in.h \ No newline at end of file diff --git a/gnulib/lib/sys/.gitignore b/gnulib/lib/sys/.gitignore new file mode 100644 index 0000000..f6e392f --- /dev/null +++ b/gnulib/lib/sys/.gitignore @@ -0,0 +1,4 @@ +select.h +socket.h +stat.h +time.h \ No newline at end of file diff --git a/gnulib/tests/.gitignore b/gnulib/tests/.gitignore new file mode 100644 index 0000000..5b93dc2 --- /dev/null +++ b/gnulib/tests/.gitignore @@ -0,0 +1,29 @@ +.deps +.libs +Makefile +Makefile.in +test-alloca-opt +test-arpa_inet +test-fseeko +test-getaddrinfo +test-getdelim +test-getline +test-lseek +test-netinet_in +test-snprintf +test-stdbool +test-stdint +test-stdio +test-stdlib +test-string +test-sys_select +test-sys_socket +test-sys_stat +test-sys_time +test-unistd +test-vasnprintf +test-vasprintf +test-wchar +test-EOVERFLOW.c +test-EOVERFLOW +test-c-ctype diff --git a/include/.gitignore b/include/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/include/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/include/libvirt/.gitignore b/include/libvirt/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/include/libvirt/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/po/.gitignore b/po/.gitignore new file mode 100644 index 0000000..a0b63f3 --- /dev/null +++ b/po/.gitignore @@ -0,0 +1,15 @@ +stamp-po +remove-potcdate.sin +quot.sed +insert-header.sin +*.gmo +en(a)quot.header +en(a)boldquot.header +boldquot.sed +Rules-quot +POTFILES +Makevars.template +Makefile.in.in +Makefile.in +Makefile +remove-potcdate.sed diff --git a/proxy/.gitignore b/proxy/.gitignore new file mode 100644 index 0000000..f3d6ec7 --- /dev/null +++ b/proxy/.gitignore @@ -0,0 +1,5 @@ +Makefile +Makefile.in +.deps +.libs +libvirt_proxy diff --git a/python/.gitignore b/python/.gitignore new file mode 100644 index 0000000..079e574 --- /dev/null +++ b/python/.gitignore @@ -0,0 +1,14 @@ +Makefile +Makefile.in +.deps +.libs +*.lo +*.la +*.loT +libvirt.py +libvirt-export.c +libvirtclass.txt +libvirt-py.[ch] +libvirtclass.py +gen_prog +*.pyc diff --git a/python/tests/.gitignore b/python/tests/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/python/tests/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/qemud/.gitignore b/qemud/.gitignore new file mode 100644 index 0000000..04fed54 --- /dev/null +++ b/qemud/.gitignore @@ -0,0 +1,11 @@ +Makefile +Makefile.in +.deps +.libs +*.lo +*.la +libvirt_qemud +libvirtd +libvirtd.init +*.gcno +*.gcda diff --git a/src/.gitignore b/src/.gitignore new file mode 100644 index 0000000..165a562 --- /dev/null +++ b/src/.gitignore @@ -0,0 +1,16 @@ +Makefile +Makefile.in +.deps +.libs +*.lo +*.loT +*.la +virsh +*.gcda +*.gcno +*.gcov +*.cov +libvirt_parthelper +libvirt_lxc +virsh-net-edit.c +virsh-pool-edit.c diff --git a/tests/.gitignore b/tests/.gitignore new file mode 100644 index 0000000..f09e6bb --- /dev/null +++ b/tests/.gitignore @@ -0,0 +1,20 @@ +Makefile +Makefile.in +.deps +.libs +xmlrpctest +sexpr2xmltest +xml2sexprtest +virshtest +conftest +reconnect +xmconfigtest +xencapstest +qemuxml2xmltest +qemuxml2argvtest +nodeinfotest +statstest +qparamtest +*.gcda +*.gcno + diff --git a/tests/confdata/.gitignore b/tests/confdata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/confdata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/tests/sexpr2xmldata/.gitignore b/tests/sexpr2xmldata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/sexpr2xmldata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/tests/virshdata/.gitignore b/tests/virshdata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/virshdata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/tests/xencapsdata/.gitignore b/tests/xencapsdata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/xencapsdata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/tests/xmconfigdata/.gitignore b/tests/xmconfigdata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/xmconfigdata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in diff --git a/tests/xml2sexprdata/.gitignore b/tests/xml2sexprdata/.gitignore new file mode 100644 index 0000000..282522d --- /dev/null +++ b/tests/xml2sexprdata/.gitignore @@ -0,0 +1,2 @@ +Makefile +Makefile.in

16 years, 1 month

3
5
0 / 0

[libvirt] libvirt-qpid

by Ian Main

Howdy folks! So I've been working on a qpid interface to libvirt. Here's the description I've come up with: libvirt-qpid provides an interface with libvirt using QMF (qpid modeling framework) which utilizes the AMQP protocol. The Advanced Message Queuing Protocol (AMQP) is an open standard application layer protocol providing reliable transport of messages. QMF provides a modeling framework layer on top of qpid. This interface allows you to manage hosts, domains, pools etc. as a set of objects with properties and methods. The source code repo: http://git.et.redhat.com/?p=libvirt-qpid.git;a=summary So I'd like to hear any feedback you guys might have. This file in particular describes the API that is used to interact with libvirt. http://git.et.redhat.com/?p=libvirt-qpid.git;a=blob_plain;f=src/libvirt-s... My TODO list looks like this: - Not sure on camel case or underscores. Original libvirt API uses camel case, I went with underscores as I was originally basing it off the ruby bindings. - Need rc scripts, daemonization, better reconnect/error handling for both qpid and libvirt. I think it should attempt to reconnect until successful whenever it gets disconnected. We may need an extra status property for this state as well. - Return libvirt error codes? (it's just text msgs right now with error status bit). - Make it less chatty, but log stuff If you wish to try it out, I've made rpms for fedora 9 x86_64 and i386. They are in the ovirt repo, which you can add to yum using: rpm -ivh http://ovirt.org/repos/ovirt/9/ovirt-release-LATEST.fc9.noarch.rpm Once you have that set up, 'yum install libvirt-qpid python-qpid', and then run (each in their own terminals): qpidd --auth no libvirt-qpid (as root to auth with libvirt) qpid-tool qpid-tool provides an interface to qpid and allows you to view/manipulate the qpid models/objects. Here is an example of how it looks using qpid-tool: $ qpid-tool Management Tool for QPID qpid: list Management Object Types: ObjectType Active Deleted ============================================ com.redhat.libvirt:domain 2 0 com.redhat.libvirt:node 1 0 qpid: list node Objects of type com.redhat.libvirt:node ID Created Destroyed Index ================================= 101 00:02:00 - qpid: show 101 Object of type com.redhat.libvirt:node: (last sample time: 17:47:54) Type Element 101 ============================================== property hostname vpro.mains.net property uri qemu:///system property libvirt_version 0.4.5 property api_version 0.4.5 property hypervisor_version 0.9.1 property hypervisor_type QEMU qpid: list domain Objects of type com.redhat.libvirt:domain ID Created Destroyed Index ================================= 102 00:02:05 - 101 103 00:02:05 - 101 qpid: show 102 Object of type com.redhat.libvirt:domain: (last sample time: 17:48:09) Type Element 102 ================================================================= property uuid 662958f8-12c5-baad-2252-4d2126e0971f property name ovirt-appliance property node 101 property state shutoff property num_vcpus 1 property active false statistic maximum_memory 786432 statistic memory 786432 statistic cpu_time 0 qpid: call 102 create Call Result: create 0 (OK) {} qpid: show 102 Object of type com.redhat.libvirt:domain: (last sample time: 17:48:24) Type Element 102 ================================================================= property uuid 662958f8-12c5-baad-2252-4d2126e0971f property name ovirt-appliance property node 101 property state running property num_vcpus 1 property active true statistic maximum_memory 786432 statistic memory 786432 statistic cpu_time 0 qpid:

16 years, 1 month

3
21
0 / 0

[libvirt] [PATCH] openvz: swap <source bridge=...> with <target dev=...>

by Anton Protopopov

2008/9/29 Evgeniy V. Sokolov <evg(a)parallels.com> > > >> This behaviour contradicts with description found in docs (in which >> <source> tag specify interface in host, not in container). I think, >> the previous bridge must be specified as >> <interface type='bridge'> >> <mac address='00:16:3e:34:21:9e'/> >> - <source bridge='eth10'/> >> + <target dev='eth10'/> >> </interface> >> >> You are right. It is bug. >> >> Well, here is the patch, that fixes that behaviour. >> > > Your patch is half of fix. It require to fix openvzReadNetworkConf() in > openvz_conf.c. > Here is a new one. Check it, please.

16 years, 1 month

4
24
0 / 0

[libvirt] [PATCH 0 of 2] [RFC] Add cgroup manipulation and LXC driver support

by Dan Smith

This patch set adds basic cgroup support to the LXC driver. It consists of a small internal cgroup manipulation API, as well as changes to the driver itself to utilize the support. Currently, we just set a memory limit and the allowed devices list. The cgroup.{c,h} interface can be easily redirected to libcgroup in the future if and when the decision to move in that direction is made. Some discussion on the following points is probably warranted, to help determine how deep we want to go with this internal implementation, in terms' of supporting complex system configurations, etc. - What to do if controllers are mounted in multiple places - What to do if memory and device controllers aren't present - What to do if the root group is set for exclusive cpuset behavior Some additional caveats are noted per-patch as well.

16 years, 1 month

3
16
0 / 0

[libvirt] [PATCH] Fix > 1 char device for qemu VM

by Cole Robinson

Trying to start a qemu guest with more than 1 character device (serial or parallel, doesn't count for console) always times out. There was an error in the code that would strip the pty path qemu spits out, which confused the parsing after being called more than twice. The attached patch fixes this. I verified that guests with 0, 1, and 2 serial devices all boot fine. Thanks, Cole

16 years, 1 month

3
4
0 / 0

[libvirt] Overriding vnetN with the <target> element in xml configuration not working

by Ahmed Medhat

Hello, I've been trying to dedicated a vnet interface to each virtual machine in order to be able to monitor their traffic, looking at http://libvirt.org/formatdomain.html#elementsNICSBridge it says that a virtual machine could have a specific vnetN specified in the xml element <target>, like <target dev='vnet7'/> . Unfortunately its not working and still it comes with vnet(current+1), here's my configuration for a qemu-kvm guest. <interface type='bridge'> <source bridge='virbr0'/> <target dev='vnet7'/> <mac address='00:16:3e:6c:1f:9d'/> </interface> I'm running on F9 x86_64, libvirt-0.4.4-2.fc9.x86_64 libvirt-python-0.4.4-2.fc9.x86_64 kvm-65-7.fc9.x86_64 qemu-0.9.1-6.fc9.x86_64 I haven't yet tested this with a RHEL box to know if it is version specific issue to open a bugzilla report, any input is appreciated. /* || Thanks, Ahmed Medhat || ultimatetux [at] gmail [dot] com || +2-012-4184768 || In a world without walls and fences, who needs Windows and Gates? */

16 years, 1 month

2
4
0 / 0

Re: [libvirt] Release of libvirt-0.4.6

by Dale Bewley

----- "Daniel Veillard" <veillard(a)redhat.com> wrote: > On Fri, Sep 26, 2008 at 09:17:43AM -0700, Dale Bewley wrote: > > I see that 0.4.5 for F9 just made it through bodhi, but there is no > F8 build in bodhi. > > https://admin.fedoraproject.org/updates/F9/FEDORA-2008-7768 > > > > Please release a 0.4.6 F8 update for the benefit of us using F8 > dom0. I'm stuck on non-HVM hardware for the foreseeable future, so KVM > isn't an option for me. And F9 isn't an option for me since there is > no dom0 support. > > Well it wasn't clear that the new release would really fixes things > for the Xen users (which is as we all expect the community still > using Fedora 8), is there anything in particular you were looking for > in this specific release ? It was looking more risky than potentially > useful to update there. > > Daniel I'm on the last F8 update (0.4.4) and my problem[1] I would love to see fixed is the desynchronization that occurs between libvirtd and xend if I shutdown a guest. Until xend is restarted, libvirt utils can't find the domU. [1] https://www.redhat.com/archives/fedora-xen/2008-June/msg00059.html There were a lot of fixes listed[2] for 0.4.5. I don't know if they fix this problem, but some of them sound like they would come close in the code. [2] https://www.redhat.com/archives/libvir-list/2008-September/msg00186.html -- Dale Bewley - Unix Administrator - Shields Library - UC Davis GPG: 0xB098A0F3 0D5A 9AEB 43F4 F84C 7EFD 1753 064D 2583 B098 A0F3

16 years, 1 month

2
1
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel September 2008