September 2006 - Devel - Libvirt List Archives

[Libvir] Supporting new Xen 3.0.3 blktap backend for file devices

by Daniel P. Berrange

When defining a guest's block device in the libvirt XML we currently allow the dev to be backed by either a file or block device in the host system. This is done by specifying the 'type' attribute when defing the block device XML. eg <disk type='file'> Or <disk type='block'> This is all fine & dandy for Xen 3.0.2, but in 3.0.3 we now have a choice of drivers for the 'file' backed block devices. We can either use the traditional loopback mounted system, or the new blktap system. To complicate things further still, blktap itself has man different drivers - one uses a raw file with Async-IO, another uses the QCow sparse format with AIO, and all sort of other possibilities are available... This means the easy option of just making all file devices use blktap in 3.0.3 is not practical. This in turns means we need to come up with a way to express the new driver methods in libvirt XML. There are a few options I can think of : - Allow more values in the 'type' attribute, eg file, block, blktap:aio, blktap:qcow, etc. This feels wrong because the blktap:* entries are really still 'file' types. - Introduce a new attribute 'driver' where you can specify 'loop', 'blktap:aio', 'blktap:qcow', etc - Introduce a new element 'driver' where you can specify the same <disk type="file"> <driver type='blktap:aio'/> </disk> - Same as above, but normalize the driver type further <disk type="file"> <driver type='blktap' backend='aio' /> </disk> My preference is probably option 3 or 4. Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

18 years, 1 month

3
7
0 / 0

[Libvir] Problem with hypercall

by Jim Fehlig

Stumbled across a problem trying to list domains with libvirt-0.1.5. Using virsh I get errors such as xen81:/tests/jim # virsh list Id Name State ---------------------------------- 0 Domain-0 running libvir: Xen Daemon error : GET operation failed: No such domain 16 xm shows xen81:/tests/jim # xm list Name ID Mem(MiB) VCPUs State Time(s) Domain-0 0 2048 4 r----- 815825.8 vm1 1 512 2 -b---- 0.3 I found that the buffer provided for XEN_V1_OP_GETDOMAININFOLIST hypercall differs slightly from the buffer in xen/dom0_ops.h. Attached is a patch against current cvs that works for me, but I'm not familiar with this part of the code so not sure if this is the proper fix. I'm using xen 3.0.2 that shipped with SLES10. Regards, Jim

18 years, 1 month

3
8
0 / 0

[Libvir] Release of libvirt-0.1.7

by Daniel Veillard

Is available on ftp://libvirt.org/libvirt/ It's 0.1.6 with the fixes for the 2 bugs that Daniel Berrange fixed yesterday: - failure of domain info when using the hypervisor on 32 bits with 3.0.3 - the memory corrption which can happen when reading vCPU info from xend Daniel -- Red Hat Virtualization group http://redhat.com/virtualization/ Daniel Veillard | virtualization library http://libvirt.org/ veillard(a)redhat.com | libxml GNOME XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | Rpmfind RPM search engine http://rpmfind.net/

18 years, 1 month

1
0
0 / 0

Re: [Libvir] Proposal for virtual devices described in XML

by michel.ponceau＠bull.net

When specified at device creation, vifname is put in XenStore directory /local/domain/0/backend/vif/<domID>/<vif_number>. All vifnames used in a domain are returned by Get "/xend/domain/<domID>?detail=1" and converted into XML "target" by virDomainGetXMLDesc. For convenience, we could force the vifname, either at domain creation or in Attach, and ignore any "target" in "interface", except for Detach. The vifname value could be the sequence number of network device creation in domain (for Xen, it would be equal to vif number). Veuillez répondre à "Daniel P. Berrange" <berrange(a)redhat.com> Pour : michel.ponceau(a)bull.net cc : libvir-list(a)redhat.com Objet : Re: [Libvir] Proposal for virtual devices described in XML On Wed, Sep 27, 2006 at 05:21:33PM +0200, michel.ponceau(a)bull.net wrote: > After comments from Daniel P. Berrange and from Bull people, my proposal > is reduced to following 2 functions: > > /* Create a virtual device attachment to backend */ > int virDomainAttachDevice(virDomainPtr domain, char *xml); This is definitely a good way forward - it lets us re-use the existing code for parsing device descriptions very easily. > /* Destroy a virtual device attachment to backend */ > int virDomainDetachDevice(virDomainPtr domain, char *xml); > /* @domain: pointer to domain object > * @xml: pointer to XML description of one device > * Returns 0 in case of success, -1 in case of failure. */ I was wondering whether we need to have the full XML block passed in for detaching devices. Perhaps it is sufficient to just pass i nthe target name of the device. Then again, some implementations may prefer to have the full XML blob available to allow greater sanity checking when detaching, so its probably worth while. > The XML would be in same form as the part of domain description for a > single device, either <disk.../disk> or <interface.../interface>. Very nice. > The device is identified by its target name. This attribute is optional > for "interface" in domain description, but would become mandatory in > Attach/Detach description. It is not yet processed in Libvirt-0.1.6 source > xml.c (function virDomainParseXMLIfDesc). I have successfully tried the attached patch, which tranlates "target" > into Xen "vifname". (It processes "ip" attribute in same way, but my try > failed, maybe because address value was invalid for Xen). I'm not sure I like the idea of having to explicitly set a vif name for every guest NIC we define - principally because there's no straightforward way for a user of this API to determine what VIF names are already in use, vs free. It also seems XenD does not tell us what the vifname for running domains are - although I think the info is in xenstore somewhere. I can see why we need the vifname to detach the device though. If we can find a way to fill in the vifname when dumping the XML, then this would let a caller uniquely identify an existing device, without us requireing that vifnames are used when creating a domain/attaching a new device (& thus let Xen still auto-allocate them) Regards, Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

18 years, 1 month

2
1
0 / 0

[Libvir] Proposal for virtual devices described in XML

by michel.ponceau＠bull.net

My try of "ip" attribute failed because of a bug in patch. With this corrected file, it works as well as "target". Pour : libvir-list(a)redhat.com cc : Objet : Proposal for virtual devices described in XML After comments from Daniel P. Berrange and from Bull people, my proposal is reduced to following 2 functions: /* Create a virtual device attachment to backend */ int virDomainAttachDevice(virDomainPtr domain, char *xml); /* Destroy a virtual device attachment to backend */ int virDomainDetachDevice(virDomainPtr domain, char *xml); /* @domain: pointer to domain object * @xml: pointer to XML description of one device * Returns 0 in case of success, -1 in case of failure. */ The XML would be in same form as the part of domain description for a single device, either <disk.../disk> or <interface.../interface>. The device is identified by its target name. This attribute is optional for "interface" in domain description, but would become mandatory in Attach/Detach description. It is not yet processed in Libvirt-0.1.6 source xml.c (function virDomainParseXMLIfDesc). I have successfully tried the attached patch, which tranlates "target" into Xen "vifname". (It processes "ip" attribute in same way, but my try failed, maybe because address value was invalid for Xen).

18 years, 1 month

1
0
0 / 0

[Libvir] virDomainDestroy not synchronous?

by Lon Hohberger

i686 libvirt-0.1.5-3 xen-3.0.2-33 Code: domain_desc = virDomainGetXMLDesc(vdp, 0); response = virDomainDestroy(vdp); if (response == 0 && domain_desc) { /* sleep(3); */ virDomainCreateLinux(vp, domain_desc, 0); free(domain_desc); } If I add the 'sleep()', the domain dies and virDomainCreateLinux() fails with the following error: libvir: Xen Daemon error : POST operation failed: No such domain futon1 Failed to get devices for domain futon1 That really doesn't bother me, and it's likely my fault anyway (it's not a fully configured domain; it's a dom-U sitting in the anaconda install screen). Of course, it's moot if we get a guaranteed synchronous reboot flag for virDomainReboot()... hint hint ;) What bothers me is that if I *don't* put the sleep in, the domain never actually gets destroyed. In this particular case, the domain is still sitting at the anaconda install screen; all I have to do is reconnect using xm console. If I only do a virDomainDestroy(), the domain gets destroyed. So, it looks like like the virDomainCreateLinux() cancels the destroy request before it can be completed. This makes it look like that the destroy request is not synchronous, and/or the result of the operation is not guaranteed (only that the request was made). Is it supposed to work this way, or is this a bug/problem? -- Lon

18 years, 1 month

4
7
0 / 0

[Libvir] Proposal for virtual devices described in XML

by michel.ponceau＠bull.net

After comments from Daniel P. Berrange and from Bull people, my proposal is reduced to following 2 functions: /* Create a virtual device attachment to backend */ int virDomainAttachDevice(virDomainPtr domain, char *xml); /* Destroy a virtual device attachment to backend */ int virDomainDetachDevice(virDomainPtr domain, char *xml); /* @domain: pointer to domain object * @xml: pointer to XML description of one device * Returns 0 in case of success, -1 in case of failure. */ The XML would be in same form as the part of domain description for a single device, either <disk.../disk> or <interface.../interface>. The device is identified by its target name. This attribute is optional for "interface" in domain description, but would become mandatory in Attach/Detach description. It is not yet processed in Libvirt-0.1.6 source xml.c (function virDomainParseXMLIfDesc). I have successfully tried the attached patch, which tranlates "target" into Xen "vifname". (It processes "ip" attribute in same way, but my try failed, maybe because address value was invalid for Xen).

18 years, 2 months

2
1
0 / 0

[Libvir] Flag to virDomainReboot to immediately reboot a domain?

by Lon Hohberger

Hi, For fencing Xen domains, I would like the ability to guarantee an immediate reboot of a domain without notifying the OS inside. Basically, I would like something equivalent to pressing the reset button on a physical machine. There's a currently unused "flags" option to virDomainReboot which would allow such an addition without breaking the ABI. Doing getXMLDesc/Destroy/Create introduces a race condition in clusters: What if outside management software notices notices the VM is missing and decides to start it up on *another* host node before we bring up the VM again using the Create call? An immediate reboot should eliminate the race (even though it's a very small window), and probably will not add any complexity. For now, 'reboot' is done as above, and 'off' is a simple Destroy call. 'On' is not possible to implement for various reasons, the most obvious of which is that the caller does not know any of the configuration information about particular domUs (except for their names). -- Lon

18 years, 2 months

1
0
0 / 0

[Libvir] Release of libvirt-0.1.6

by Daniel Veillard

Available at ftp://libvirt.org/libvirt/ Mostly a few bug fixes, preparing the upcoming xen-3.0.3, and localization support were added in the last 2 weeks: * Support for localization of strings using gettext (Daniel Berrange) * Support for new Xen-3.0.3 cdrom and disk configuration (Daniel Berrange) * Support for setting VNC port when creating domains with new xend config files (Daniel Berrange) * Fix bug when running against xen-3.0.2 hypercalls (Jim Fehlig) * Fix reconnection problem when talking directly to http xend thanks to everybody who helped testing, improving and fixing it ! Daniel -- Red Hat Virtualization group http://redhat.com/virtualization/ Daniel Veillard | virtualization library http://libvirt.org/ veillard(a)redhat.com | libxml GNOME XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | Rpmfind RPM search engine http://rpmfind.net/

18 years, 2 months

1
0
0 / 0

[Libvir] gettext i18n support for libvirt

by Daniel P. Berrange

Attached is an updated version of my previous patch to add gettext support to libvirt. It should be pretty self-explanatory - basically wrapping all strings with _(..) or gettext_noop(...) where appropriate. I also took the opportunity to make some of the messages more consistent with each other. (To cut down size, I'm not including the actual libvirt.pot file ) Dan. -- |=- Red Hat, Engineering, Emerging Technologies, Boston. +1 978 392 2496 -=| |=- Perl modules: http://search.cpan.org/~danberr/ -=| |=- Projects: http://freshmeat.net/~danielpb/ -=| |=- GnuPG: 7D3B9505 F3C9 553F A1DA 4AC2 5648 23C1 B3DF F742 7D3B 9505 -=|

18 years, 2 months

2
5
0 / 0

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

Devel September 2006