- CI - libvirt List Archives

[Libvirt-ci] Build failed in Jenkins: libvirt-master-check » libvirt-debian-8 #1352
by ci＠centos.org 04 Sep '18

04 Sep '18

See <https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/135…> ------------------------------------------ [...truncated 22.59 KB...] PASS: test-close PASS: test-connect PASS: test-c-strcasestr PASS: test-count-leading-zeros PASS: test-ctype PASS: test-count-one-bits PASS: test-dup PASS: test-environ PASS: test-errno PASS: test-dup2 PASS: test-fcntl-h PASS: test-fclose PASS: test-fcntl PASS: test-fdatasync PASS: test-fdopen PASS: test-fflush PASS: test-ffs PASS: test-fflush2.sh PASS: test-ffsl PASS: test-float PASS: test-fnmatch PASS: test-fgetc PASS: test-fread PASS: test-fpurge PASS: test-fputc PASS: test-fseek.sh PASS: test-freading PASS: test-fseeko2.sh PASS: test-fseek2.sh PASS: test-fseeko.sh PASS: test-fstat PASS: test-fseeko3.sh PASS: test-fseeko4.sh PASS: test-ftell.sh PASS: test-ftell2.sh PASS: test-fsync PASS: test-ftell3 PASS: test-ftello.sh PASS: test-ftello3 PASS: test-ftello2.sh PASS: test-ftello4.sh PASS: test-ftruncate.sh PASS: test-func PASS: test-fwrite PASS: test-getcwd-lgpl PASS: test-getdelim PASS: test-getdtablesize PASS: test-gethostname PASS: test-getgroups PASS: test-getline PASS: test-getpeername PASS: test-getprogname PASS: test-getopt-posix PASS: test-getsockopt PASS: test-getsockname PASS: test-gettimeofday PASS: test-ignore-value PASS: test-grantpt PASS: test-inet_ntop PASS: test-inet_pton PASS: test-inttypes PASS: test-intprops PASS: test-ioctl PASS: test-isatty PASS: test-isblank PASS: test-isnand-nolibm PASS: test-isnanf-nolibm PASS: test-isnanl-nolibm PASS: test-langinfo PASS: test-limits-h PASS: test-listen PASS: test-ldexp PASS: test-locale PASS: test-localeconv PASS: test-localename PASS: test-lseek.sh PASS: test-lstat PASS: test-math SKIP: test-mbrtowc1.sh PASS: test-malloca SKIP: test-mbrtowc2.sh SKIP: test-mbrtowc3.sh SKIP: test-mbrtowc4.sh SKIP: test-mbrtowc-w32-1.sh PASS: test-mbrtowc5.sh SKIP: test-mbrtowc-w32-2.sh SKIP: test-mbrtowc-w32-3.sh SKIP: test-mbrtowc-w32-5.sh SKIP: test-mbrtowc-w32-4.sh SKIP: test-mbsinit.sh SKIP: test-mbsrtowcs1.sh SKIP: test-mbsrtowcs2.sh SKIP: test-mbsrtowcs3.sh SKIP: test-mbsrtowcs4.sh PASS: test-getaddrinfo PASS: test-net_if PASS: test-netdb PASS: test-netinet_in PASS: test-nl_langinfo.sh PASS: test-memchr PASS: test-nanosleep PASS: test-nonblocking PASS: test-open PASS: test-openpty PASS: test-passfd PASS: test-pathmax PASS: test-perror.sh PASS: test-perror2 PASS: test-pipe PASS: test-pipe2 PASS: test-poll-h PASS: test-poll PASS: test-posix_openpt PASS: test-posix_spawn_file_actions_addclose PASS: test-posix_spawn_file_actions_adddup2 PASS: test-posix_spawn_file_actions_addopen PASS: test-posix_spawn1 PASS: test-posix_spawn2 PASS: test-pthread_sigmask1 PASS: test-pthread_sigmask2 SKIP: test-ptsname SKIP: test-ptsname_r PASS: test-raise PASS: test-nonblocking-pipe.sh PASS: test-rawmemchr PASS: test-read PASS: test-recv PASS: test-readlink PASS: test-regex PASS: test-sched PASS: test-select PASS: test-select-out.sh PASS: test-send PASS: test-setenv SKIP: test-setlocale1.sh PASS: test-setlocale2.sh PASS: test-setsockopt PASS: test-sigaction PASS: test-signal-h PASS: test-signbit PASS: test-sigpipe.sh PASS: test-select-in.sh PASS: test-nonblocking-socket.sh PASS: test-snprintf PASS: test-sockets PASS: test-spawn PASS: test-stat PASS: test-stat-time PASS: test-stdalign PASS: test-stdbool PASS: test-stddef PASS: test-stdint PASS: test-stdio PASS: test-stdlib PASS: test-strchrnul PASS: test-strerror PASS: test-strerror_r PASS: test-string PASS: test-strings PASS: test-strnlen PASS: test-symlink PASS: test-sys_ioctl PASS: test-sys_select PASS: test-sys_socket PASS: test-sys_stat PASS: test-sys_time PASS: test-sys_types PASS: test-sigprocmask PASS: test-sys_uio PASS: test-sys_utsname PASS: test-sys_wait PASS: test-termios PASS: test-thread_self PASS: test-thread_create PASS: test-time SKIP: test-ttyname_r PASS: test-uname PASS: test-unistd PASS: test-uc_width PASS: test-init.sh PASS: test-unlockpt PASS: test-unsetenv PASS: uniwidth/test-uc_width2.sh PASS: test-vasnprintf PASS: test-vasprintf PASS: test-sleep SKIP: test-vc-list-files-cvs.sh PASS: test-verify PASS: test-vc-list-files-git.sh PASS: test-vsnprintf PASS: test-wchar PASS: test-wcrtomb.sh SKIP: test-wcrtomb-w32-1.sh SKIP: test-wcrtomb-w32-2.sh SKIP: test-wcrtomb-w32-3.sh SKIP: test-wcrtomb-w32-4.sh SKIP: test-wcrtomb-w32-5.sh PASS: test-wctype-h PASS: test-wcwidth PASS: test-write ../../../build-aux/test-driver: line 107: 31821 Aborted "$@" > $log_file 2>&1 FAIL: test-usleep PASS: test-xalloc-die.sh PASS: test-verify.sh make[6]: Entering directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> /usr/bin/make all-recursive make[7]: Entering directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Making all in . make[8]: Entering directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> make[8]: Nothing to be done for 'all-am'. make[8]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> make[7]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> make[6]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> ============================================================================ Testsuite summary for libvirt 4.8.0 ============================================================================ # TOTAL: 219 # PASS: 192 # SKIP: 26 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See gnulib/tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ Makefile:5060: recipe for target 'test-suite.log' failed make[5]: *** [test-suite.log] Error 1 make[5]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Makefile:5166: recipe for target 'check-TESTS' failed make[4]: *** [check-TESTS] Error 2 make[4]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Makefile:6790: recipe for target 'check-am' failed make[3]: *** [check-am] Error 2 make[3]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Makefile:4953: recipe for target 'check-recursive' failed make[2]: *** [check-recursive] Error 1 make[2]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Makefile:6793: recipe for target 'check' failed make[1]: *** [check] Error 2 make[1]: Leaving directory '<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-debian-8/ws/…'> Makefile:2100: recipe for target 'check-recursive' failed make: *** [check-recursive] Error 1 + cat tests/test-suite.log cat: tests/test-suite.log: No such file or directory + true + exit 1 Build step 'Execute shell' marked build as failure

1 1

[Libvirt-ci] Build failed in Jenkins: libvirt-dbus-master-check » libvirt-fedora-27 #375
by ci＠centos.org 04 Sep '18

04 Sep '18

See <https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…> ------------------------------------------ Started by upstream project "libvirt-dbus-master-check" build number 375 originally caused by: Started by upstream project "libvirt-dbus-master-syntax-check" build number 38 originally caused by: Started by upstream project "libvirt-dbus-master-build" build number 410 originally caused by: Started by upstream project "libvirt-glib-master-build" build number 1382 originally caused by: Started by upstream project "libvirt-master-build" build number 1726 originally caused by: Started by an SCM change [EnvInject] - Loading node environment variables. Building remotely on libvirt-fedora-27 (libvirt) in workspace <https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…> [libvirt-dbus-master] $ /bin/sh -xe /tmp/jenkins2218808496410781051.sh + cd build + /usr/bin/gmake check Making check in data gmake[1]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[1]: Nothing to be done for 'check'. gmake[1]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> Making check in docs gmake[1]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[1]: Nothing to be done for 'check'. gmake[1]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> Making check in src gmake[1]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[1]: Nothing to be done for 'check'. gmake[1]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> Making check in tests gmake[1]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> /usr/bin/gmake test_util gmake[2]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> CC test_util-test_util.o CCLD test_util gmake[2]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> /usr/bin/gmake check-TESTS gmake[2]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[3]: Entering directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> PASS: test_util PASS: test_interface.py PASS: test_domain.py PASS: test_network.py PASS: test_nodedev.py FAIL: test_connect.py PASS: test_storage.py ============================================================================ Testsuite summary for libvirt-dbus 1.3.0 ============================================================================ # TOTAL: 7 # PASS: 6 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ gmake[3]: *** [Makefile:759: test-suite.log] Error 1 gmake[3]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[2]: *** [Makefile:867: check-TESTS] Error 2 gmake[2]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake[1]: *** [Makefile:980: check-am] Error 2 gmake[1]: Leaving directory '<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…'> gmake: *** [Makefile:460: check-recursive] Error 1 + cat tests/test-suite.log ============================================== libvirt-dbus 1.3.0: tests/test-suite.log ============================================== # TOTAL: 7 # PASS: 6 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: test_connect.py ===================== ============================= test session starts ============================== platform linux -- Python 3.6.6, pytest-3.2.3, py-1.4.34, pluggy-0.4.0 rootdir: <https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-fedora-…,> inifile: collected 35 items ../../tests/test_connect.py ..................E...............E ==================================== ERRORS ==================================== ________ ERROR at setup of TestConnect.test_connect_get_cpu_model_names ________ self = <test_connect.TestConnect object at 0x7f90b3ac6748> request = <SubRequest 'libvirt_dbus_setup' for <Function 'test_connect_get_cpu_model_names'>> @pytest.fixture(autouse=True) def libvirt_dbus_setup(self, request): """Start libvirt-dbus for each test function """ os.environ['LIBVIRT_DEBUG'] = '3' self.libvirt_dbus = subprocess.Popen([exe, '--session']) self.bus = dbus.SessionBus() for i in range(10): if self.bus.name_has_owner('org.libvirt'): break time.sleep(0.1) else: > raise TimeoutError('error starting libvirt-dbus') E TimeoutError: error starting libvirt-dbus ../../tests/libvirttest.py:44: TimeoutError ERROR at setup of TestConnect.test_connect_storage_vol_lookup_by_property[StorageVolLookupByPath-Path] self = <test_connect.TestConnect object at 0x7f90b3f37550> @pytest.fixture def storage_volume_create(self): """ Fixture to create dummy storage volume on the test driver This fixture should be used in the setup of every test manipulating with test volume. """ _, test_storage_pool = self.get_test_storage_pool() interface_obj = dbus.Interface(test_storage_pool, 'org.libvirt.StoragePool') > path = interface_obj.StorageVolCreateXML(xmldata.minimal_storage_vol_xml, 0) ../../tests/libvirttest.py:122: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /usr/lib64/python3.6/site-packages/dbus/proxies.py:70: in __call__ return self._proxy_method(*args, **keywords) /usr/lib64/python3.6/site-packages/dbus/proxies.py:145: in __call__ **keywords) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <dbus._dbus.SessionBus (session) at 0x7f90b3f40990> bus_name = dbus.String(':1.19') object_path = dbus.ObjectPath('/org/libvirt/Test/storagepool/_dfe224cb_28fb_8dd0_c4b2_64eb3f0f4566') dbus_interface = 'org.libvirt.StoragePool', method = 'StorageVolCreateXML' signature = 'su' args = ('\n<volume>\n <name>sparse.img</name>\n <capacity unit="G">2</capacity>\n <target>\n <path>/var/lib/virt/images/sparse.img</path>\n </target>\n</volume>\n', 0) timeout = -1.0, byte_arrays = False, kwargs = {} get_args_opts = {'byte_arrays': False} message = <dbus.lowlevel.MethodCallMessage path: /org/libvirt/Test/storagepool/_dfe224cb_28fb_8dd0_c4b2_64eb3f0f4566, iface: org.libvirt.StoragePool, member: StorageVolCreateXML dest: :1.19> def call_blocking(self, bus_name, object_path, dbus_interface, method, signature, args, timeout=-1.0, byte_arrays=False, **kwargs): """Call the given method, synchronously. :Since: 0.81.0 """ if object_path == LOCAL_PATH: raise DBusException('Methods may not be called on the reserved ' 'path %s' % LOCAL_PATH) if dbus_interface == LOCAL_IFACE: raise DBusException('Methods may not be called on the reserved ' 'interface %s' % LOCAL_IFACE) # no need to validate other args - MethodCallMessage ctor will do get_args_opts = dict(byte_arrays=byte_arrays) if is_py2: get_args_opts['utf8_strings'] = kwargs.get('utf8_strings', False) elif 'utf8_strings' in kwargs: raise TypeError("unexpected keyword argument 'utf8_strings'") message = MethodCallMessage(destination=bus_name, path=object_path, interface=dbus_interface, method=method) # Add the arguments to the function try: message.append(signature=signature, *args) except Exception as e: logging.basicConfig() _logger.error('Unable to set arguments %r according to ' 'signature %r: %s: %s', args, signature, e.__class__, e) raise # make a blocking call reply_message = self.send_message_with_reply_and_block( > message, timeout) E dbus.exceptions.DBusException: org.libvirt.Error: operation failed: storage vol already exists /usr/lib64/python3.6/site-packages/dbus/connection.py:651: DBusException ===================== 33 passed, 2 error in 17.40 seconds ====================== FAIL test_connect.py (exit status: 1) + exit 1 Build step 'Execute shell' marked build as failure

1 1

[Libvirt-ci] Errored: libvirt/libvirt-python#8 (master - fc40001)
by Travis CI 03 Sep '18

03 Sep '18

Build Update for libvirt/libvirt-python ------------------------------------- Build: #8 Status: Errored Duration: 15 mins and 22 secs Commit: fc40001 (master) Author: Daniel Veillard Message: Release of libvirt-python=4.7.0 * setup.py: updated for release Signed-off-by: Daniel Veillard <veillard(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt-python/compare/0159ae02dfdd...fc4000152e… View the full build log and details: https://travis-ci.org/libvirt/libvirt-python/builds/424019809?utm_source=em… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications This email was sent to libvirt-ci(a)redhat.com (mailto:libvirt-ci@redhat.com) unsubscribe from this list (http://clicks.travis-ci.com/track/unsub.php?u=14313403&id=5a9540f357e946a7a…)

1 0

[Libvirt-ci] Errored: libvirt/libvirt-python#7 (v4.7.0 - fc40001)
by Travis CI 03 Sep '18

03 Sep '18

Build Update for libvirt/libvirt-python ------------------------------------- Build: #7 Status: Errored Duration: 19 mins and 31 secs Commit: fc40001 (v4.7.0) Author: Daniel Veillard Message: Release of libvirt-python=4.7.0 * setup.py: updated for release Signed-off-by: Daniel Veillard <veillard(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt-python/compare/v4.7.0 View the full build log and details: https://travis-ci.org/libvirt/libvirt-python/builds/424019755?utm_source=em… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications This email was sent to libvirt-ci(a)redhat.com (mailto:libvirt-ci@redhat.com) unsubscribe from this list (http://clicks.travis-ci.com/track/unsub.php?u=14313403&id=071772bee8814dbda…)

1 0

[Libvirt-ci] Passed: libvirt/libvirt#1640 (v4.7.0 - ab58260)
by Travis CI 03 Sep '18

03 Sep '18

Build Update for libvirt/libvirt ------------------------------------- Build: #1640 Status: Passed Duration: 21 mins and 23 secs Commit: ab58260 (v4.7.0) Author: Daniel Veillard Message: Release of libvirt-4.7.0 * docs/news.xml: updated for release Signed-off-by: Daniel Veillard <veillard(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/v4.7.0 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/424019680?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications This email was sent to libvirt-ci(a)redhat.com (mailto:libvirt-ci@redhat.com) unsubscribe from this list (http://clicks.travis-ci.com/track/unsub.php?u=14313403&id=e2a94ea6852044e99…)

1 0

[Libvirt-ci] Build failed in Jenkins: libvirt-master-check » libvirt-freebsd-10 #1348
by ci＠centos.org 03 Sep '18

03 Sep '18

See <https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/1…> ------------------------------------------ [...truncated 48.01 KB...] SKIP: virhostcputest PASS: virbuftest PASS: seclabeltest PASS: virhashtest PASS: virconftest PASS: commandtest PASS: utiltest SKIP: shunloadtest PASS: virtimetest PASS: viruritest PASS: virkeyfiletest PASS: viralloctest PASS: virauthconfigtest PASS: virbitmaptest SKIP: vircgrouptest PASS: vircryptotest SKIP: virpcitest PASS: virendiantest PASS: virfiletest PASS: virfilecachetest SKIP: virfirewalltest PASS: viriscsitest PASS: virkeycodetest PASS: virlockspacetest PASS: viratomictest PASS: virlogtest PASS: virrotatingfiletest PASS: virstringtest SKIP: virportallocatortest PASS: sysinfotest SKIP: virkmodtest PASS: vircapstest PASS: domaincapstest PASS: domainconftest SKIP: virhostdevtest SKIP: virnetdevtest PASS: virtypedparamtest PASS: vshtabletest PASS: virnetmessagetest FAIL: virnetsockettest PASS: virnetdaemontest PASS: virnetserverclienttest SKIP: virnettlscontexttest SKIP: virnettlssessiontest PASS: fdstreamtest PASS: virdbustest SKIP: virsystemdtest PASS: virpolkittest PASS: qemuxml2argvtest PASS: virschematest PASS: qemuargv2xmltest PASS: domainsnapshotxml2xmltest PASS: qemuxml2xmltest PASS: qemumonitorjsontest PASS: qemuagenttest PASS: qemuhotplugtest PASS: qemucaps2xmltest PASS: qemumemlocktest PASS: qemucommandutiltest PASS: qemublocktest PASS: qemumigparamstest PASS: esxutilstest PASS: vboxsnapshotxmltest PASS: qemucapabilitiestest PASS: vmx2xmltest PASS: vmwarevertest PASS: bhyvexml2argvtest PASS: xml2vmxtest PASS: bhyvexml2xmltest PASS: bhyveargv2xmltest PASS: virjsontest PASS: networkxml2xmltest PASS: networkxml2conftest SKIP: networkxml2firewalltest PASS: networkxml2xmlupdatetest PASS: virnwfilterbindingxml2xmltest PASS: storagevolxml2argvtest PASS: nwfilterxml2xmltest PASS: virstorageutiltest PASS: nssguesttest PASS: nsstest PASS: storagevolxml2xmltest PASS: storagepoolxml2xmltest PASS: nodedevxml2xmltest PASS: interfacexml2xmltest PASS: metadatatest PASS: secretxml2xmltest PASS: genericxml2xmltest PASS: eventtest PASS: virdrivermoduletest PASS: objecteventtest PASS: virmacmaptest PASS: libvirtd-fail PASS: libvirtd-pool PASS: virsh-cpuset PASS: virsh-define-dev-segfault PASS: virsh-int-overflow SKIP: virsh-optparse PASS: virsh-read-bufsiz PASS: virsh-read-non-seekable PASS: virsh-schedinfo PASS: cputest PASS: virsh-self-test PASS: virsh-start PASS: virt-admin-self-test PASS: virsh-undefine PASS: virsh-uriprecedence PASS: virsh-vcpupin PASS: virshtest ============================================================================ Testsuite summary for libvirt 4.7.0 ============================================================================ # TOTAL: 110 # PASS: 95 # SKIP: 14 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ gmake[3]: *** [Makefile:5841: test-suite.log] Error 1 gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake[2]: *** [Makefile:5949: check-TESTS] Error 2 gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake[1]: *** [Makefile:6954: check-am] Error 2 gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake: *** [Makefile:2111: check-recursive] Error 1 + cat tests/test-suite.log ========================================= libvirt 4.7.0: tests/test-suite.log ========================================= # TOTAL: 110 # PASS: 95 # SKIP: 14 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 SKIP: virhostcputest ==================== SKIP virhostcputest (exit status: 77) SKIP: shunloadtest ================== SKIP shunloadtest (exit status: 77) SKIP: vircgrouptest =================== SKIP vircgrouptest (exit status: 77) SKIP: virpcitest ================ SKIP virpcitest (exit status: 77) SKIP: virfirewalltest ===================== SKIP virfirewalltest (exit status: 77) SKIP: virportallocatortest ========================== SKIP virportallocatortest (exit status: 77) SKIP: virkmodtest ================= SKIP virkmodtest (exit status: 77) SKIP: virhostdevtest ==================== SKIP virhostdevtest (exit status: 77) SKIP: virnetdevtest =================== SKIP virnetdevtest (exit status: 77) FAIL: virnetsockettest ====================== TEST: virnetsockettest 1) Socket TCP/IPv4 Accept ... FAILED 2) Socket TCP/IPv6 Accept ... libvirt: XML-RPC error : End of file while reading data: Input/output error OK 3) Socket TCP/IPv4+IPv6 Accept ... libvirt: XML-RPC error : End of file while reading data: Input/output error OK 4) Socket TCP/IPv4+IPv6 Accept ... libvirt: XML-RPC error : Cannot recv data: Connection reset by peer OK 5) Socket UNIX Accept ... libvirt: XML-RPC error : Cannot write data: Broken pipe OK 6) Socket UNIX Addrs ... OK 7) Socket External Command /dev/zero ... OK 8) Socket External Command /dev/does-not-exist ... libvirt: XML-RPC error : End of file while reading data: cat: /dev/does-not-exist: No such file or directory: Input/output error OK 9) SSH test 1 ... OK 10) SSH test 2 ... OK 11) SSH test 3 ... OK 12) SSH test 4 ... libvirt: XML-RPC error : End of file while reading data: Cannot connect to host nosuchhost: Input/output error OK 13) SSH test 5 ... libvirt: XML-RPC error : End of file while reading data: : Input/output error OK 14) SSH test 6 ... OK 15) SSH test 7 ... OK FAIL virnetsockettest (exit status: 1) SKIP: virnettlscontexttest ========================== SKIP virnettlscontexttest (exit status: 77) SKIP: virnettlssessiontest ========================== SKIP virnettlssessiontest (exit status: 77) SKIP: virsystemdtest ==================== SKIP virsystemdtest (exit status: 77) SKIP: networkxml2firewalltest ============================= SKIP networkxml2firewalltest (exit status: 77) SKIP: virsh-optparse ==================== ../../tests/virsh-optparse: skipping test: This test is very expensive, so it is disabled by default. To run it anyway, rerun: make check VIR_TEST_EXPENSIVE=1 SKIP virsh-optparse (exit status: 77) + exit 1 Build step 'Execute shell' marked build as failure

1 2

[Libvirt-ci] Passed: libvirt/libvirt#1634 (v4.7.0-rc2 - fe67e3e)
by Travis CI 30 Aug '18

30 Aug '18

Build Update for libvirt/libvirt ------------------------------------- Build: #1634 Status: Passed Duration: 21 mins and 13 secs Commit: fe67e3e (v4.7.0-rc2) Author: Luyao Huang Message: qemu: Validate memory access during validate domain config Commit 6534b3c4 tried to raise an error when there is no numa nodes by setting access='shared' in the domain config, but added a helper called from qemuDomainDeviceDefValidate instead of a helper called from qemuDomainDefValidate for XML: <memoryBacking> <hugepages/> <access mode='shared'/> </memoryBacking> Since there are no memory devices in the test XML, there would be no validation failure, but the test added was still failing. Investigating that it turns out that unnecessary XML elements were causing the failure (no need for <video>, <graphics>, <pm>, usb controller model "piix3-uhci", disk attribute for "discard='unmap'", <serial>, <console>, <channel> and a memballoon model). Removing all those before moving the method caused the test to succeed. So this patch moves the validation to the right place and removes all the unnecessary XML pieces that were causing a false validation failure. https://bugzilla.redhat.com/show_bug.cgi?id=1448149#c14 Signed-off-by: Luyao Huang <lhuang(a)redhat.com> Reviewed-by: John Ferlan <jferlan(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/v4.7.0-rc2 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/422442480?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications This email was sent to libvirt-ci(a)redhat.com (mailto:libvirt-ci@redhat.com) unsubscribe from this list (http://clicks.travis-ci.com/track/unsub.php?u=14313403&id=ec823542882844fcb…)

1 0

[Libvirt-ci] Build failed in Jenkins: libvirt-dbus-master-check » libvirt-freebsd-10 #368
by ci＠centos.org 29 Aug '18

29 Aug '18

See <https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…> ------------------------------------------ [...truncated 5.50 KB...] # FAIL: 2 # XPASS: 0 # ERROR: 0 ============================================================================ See tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ gmake[3]: *** [Makefile:766: test-suite.log] Error 1 gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…'> gmake[2]: *** [Makefile:874: check-TESTS] Error 2 gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…'> gmake[1]: *** [Makefile:990: check-am] Error 2 gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…'> gmake: *** [Makefile:460: check-recursive] Error 1 + cat tests/test-suite.log ============================================== libvirt-dbus 1.3.0: tests/test-suite.log ============================================== # TOTAL: 7 # PASS: 5 # SKIP: 0 # XFAIL: 0 # FAIL: 2 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: test_connect.py ===================== ============================= test session starts ============================== platform freebsd10 -- Python 3.6.5, pytest-3.4.2, py-1.5.3, pluggy-0.6.0 rootdir: /usr<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…,> inifile: collected 35 items ../../tests/test_connect.py .......E.......E..................E [100%] ==================================== ERRORS ==================================== ERROR at setup of TestConnect.test_connect_properties_return_type[Encrypted-Boolean] self = <test_connect.TestConnect object at 0x809560d68> request = <SubRequest 'libvirt_dbus_setup' for <Function 'test_connect_properties_return_type[Encrypted-Boolean]'>> @pytest.fixture(autouse=True) def libvirt_dbus_setup(self, request): """Start libvirt-dbus for each test function """ os.environ['LIBVIRT_DEBUG'] = '3' self.libvirt_dbus = subprocess.Popen([exe, '--session']) self.bus = dbus.SessionBus() for i in range(10): if self.bus.name_has_owner('org.libvirt'): break time.sleep(0.1) else: > raise TimeoutError('error starting libvirt-dbus') E TimeoutError: error starting libvirt-dbus ../../tests/libvirttest.py:44: TimeoutError ERROR at setup of TestConnect.test_connect_interface_lookup_by_property[InterfaceLookupByMAC-MAC] self = <test_connect.TestConnect object at 0x8094ea0b8> @pytest.fixture def interface_create(self): """ Fixture to define dummy interface on the test driver This fixture should be used in the setup of every test manipulating with interfaces. """ path = self.connect.InterfaceDefineXML(xmldata.minimal_interface_xml, 0) obj = self.bus.get_object('org.libvirt', path) interface_obj = dbus.Interface(obj, 'org.libvirt.Interface') > interface_obj.Create(0) ../../tests/libvirttest.py:84: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /usr/local/lib/python3.6/site-packages/dbus/proxies.py:70: in __call__ return self._proxy_method(*args, **keywords) /usr/local/lib/python3.6/site-packages/dbus/proxies.py:145: in __call__ **keywords) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <dbus._dbus.SessionBus (session) at 0x8090b06d0> bus_name = dbus.String(':1.8') object_path = dbus.ObjectPath('/org/libvirt/Test/interface/11_3a22_3a33_3a44_3a55_3a66') dbus_interface = 'org.libvirt.Interface', method = 'Create', signature = 'u' args = (0,), timeout = -1.0, byte_arrays = False, kwargs = {} get_args_opts = {'byte_arrays': False} message = <dbus.lowlevel.MethodCallMessage path: /org/libvirt/Test/interface/11_3a22_3a33_3a44_3a55_3a66, iface: org.libvirt.Interface, member: Create dest: :1.8> def call_blocking(self, bus_name, object_path, dbus_interface, method, signature, args, timeout=-1.0, byte_arrays=False, **kwargs): """Call the given method, synchronously. :Since: 0.81.0 """ if object_path == LOCAL_PATH: raise DBusException('Methods may not be called on the reserved ' 'path %s' % LOCAL_PATH) if dbus_interface == LOCAL_IFACE: raise DBusException('Methods may not be called on the reserved ' 'interface %s' % LOCAL_IFACE) # no need to validate other args - MethodCallMessage ctor will do get_args_opts = dict(byte_arrays=byte_arrays) if is_py2: get_args_opts['utf8_strings'] = kwargs.get('utf8_strings', False) elif 'utf8_strings' in kwargs: raise TypeError("unexpected keyword argument 'utf8_strings'") message = MethodCallMessage(destination=bus_name, path=object_path, interface=dbus_interface, method=method) # Add the arguments to the function try: message.append(signature=signature, *args) except Exception as e: logging.basicConfig() _logger.error('Unable to set arguments %r according to ' 'signature %r: %s: %s', args, signature, e.__class__, e) raise # make a blocking call reply_message = self.send_message_with_reply_and_block( > message, timeout) E dbus.exceptions.DBusException: org.libvirt.Error: Requested operation is not valid /usr/local/lib/python3.6/site-packages/dbus/connection.py:651: DBusException ERROR at setup of TestConnect.test_connect_storage_vol_lookup_by_property[StorageVolLookupByPath-Path] self = <test_connect.TestConnect object at 0x809605dd8> @pytest.fixture def storage_volume_create(self): """ Fixture to create dummy storage volume on the test driver This fixture should be used in the setup of every test manipulating with test volume. """ _, test_storage_pool = self.get_test_storage_pool() interface_obj = dbus.Interface(test_storage_pool, 'org.libvirt.StoragePool') > path = interface_obj.StorageVolCreateXML(xmldata.minimal_storage_vol_xml, 0) ../../tests/libvirttest.py:122: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ /usr/local/lib/python3.6/site-packages/dbus/proxies.py:70: in __call__ return self._proxy_method(*args, **keywords) /usr/local/lib/python3.6/site-packages/dbus/proxies.py:145: in __call__ **keywords) _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ self = <dbus._dbus.SessionBus (session) at 0x8090b06d0> bus_name = dbus.String(':1.8') object_path = dbus.ObjectPath('/org/libvirt/Test/storagepool/_dfe224cb_28fb_8dd0_c4b2_64eb3f0f4566') dbus_interface = 'org.libvirt.StoragePool', method = 'StorageVolCreateXML' signature = 'su' args = ('\n<volume>\n <name>sparse.img</name>\n <capacity unit="G">2</capacity>\n <target>\n <path>/var/lib/virt/images/sparse.img</path>\n </target>\n</volume>\n', 0) timeout = -1.0, byte_arrays = False, kwargs = {} get_args_opts = {'byte_arrays': False} message = <dbus.lowlevel.MethodCallMessage path: /org/libvirt/Test/storagepool/_dfe224cb_28fb_8dd0_c4b2_64eb3f0f4566, iface: org.libvirt.StoragePool, member: StorageVolCreateXML dest: :1.8> def call_blocking(self, bus_name, object_path, dbus_interface, method, signature, args, timeout=-1.0, byte_arrays=False, **kwargs): """Call the given method, synchronously. :Since: 0.81.0 """ if object_path == LOCAL_PATH: raise DBusException('Methods may not be called on the reserved ' 'path %s' % LOCAL_PATH) if dbus_interface == LOCAL_IFACE: raise DBusException('Methods may not be called on the reserved ' 'interface %s' % LOCAL_IFACE) # no need to validate other args - MethodCallMessage ctor will do get_args_opts = dict(byte_arrays=byte_arrays) if is_py2: get_args_opts['utf8_strings'] = kwargs.get('utf8_strings', False) elif 'utf8_strings' in kwargs: raise TypeError("unexpected keyword argument 'utf8_strings'") message = MethodCallMessage(destination=bus_name, path=object_path, interface=dbus_interface, method=method) # Add the arguments to the function try: message.append(signature=signature, *args) except Exception as e: logging.basicConfig() _logger.error('Unable to set arguments %r according to ' 'signature %r: %s: %s', args, signature, e.__class__, e) raise # make a blocking call reply_message = self.send_message_with_reply_and_block( > message, timeout) E dbus.exceptions.DBusException: org.libvirt.Error: operation failed: storage vol already exists /usr/local/lib/python3.6/site-packages/dbus/connection.py:651: DBusException ===================== 32 passed, 3 error in 14.73 seconds ====================== FAIL test_connect.py (exit status: 1) FAIL: test_domain.py ==================== ============================= test session starts ============================== platform freebsd10 -- Python 3.6.5, pytest-3.4.2, py-1.5.3, pluggy-0.6.0 rootdir: /usr<https://ci.centos.org/job/libvirt-dbus-master-check/systems=libvirt-freebsd…,> inifile: collected 10 items ../../tests/test_domain.py .......E.. [100%] ==================================== ERRORS ==================================== __________________ ERROR at setup of TestDomain.test_undefine __________________ self = <test_domain.TestDomain object at 0x809549ac8> request = <SubRequest 'libvirt_dbus_setup' for <Function 'test_undefine'>> @pytest.fixture(autouse=True) def libvirt_dbus_setup(self, request): """Start libvirt-dbus for each test function """ os.environ['LIBVIRT_DEBUG'] = '3' self.libvirt_dbus = subprocess.Popen([exe, '--session']) self.bus = dbus.SessionBus() for i in range(10): if self.bus.name_has_owner('org.libvirt'): break time.sleep(0.1) else: > raise TimeoutError('error starting libvirt-dbus') E TimeoutError: error starting libvirt-dbus ../../tests/libvirttest.py:44: TimeoutError ====================== 9 passed, 1 error in 11.88 seconds ====================== FAIL test_domain.py (exit status: 1) + exit 1 Build step 'Execute shell' marked build as failure

1 1

[Libvirt-ci] Build failed in Jenkins: libvirt-master-check » libvirt-centos-7 #1329
by ci＠centos.org 29 Aug '18

29 Aug '18

See <https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/132…> ------------------------------------------ [...truncated 27.14 KB...] PASS: test-unistd PASS: test-sigprocmask PASS: test-sleep PASS: test-unsetenv PASS: test-unlockpt PASS: test-vasnprintf PASS: test-vasprintf SKIP: test-vc-list-files-cvs.sh PASS: test-vc-list-files-git.sh PASS: test-verify PASS: test-vsnprintf PASS: test-wchar PASS: test-wcrtomb.sh SKIP: test-wcrtomb-w32-1.sh PASS: test-usleep SKIP: test-wcrtomb-w32-3.sh SKIP: test-wcrtomb-w32-2.sh SKIP: test-wcrtomb-w32-5.sh PASS: test-wctype-h SKIP: test-wcrtomb-w32-4.sh PASS: test-write PASS: test-xalloc-die.sh PASS: test-verify.sh gmake[6]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> /usr/bin/gmake all-recursive gmake[7]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> Making all in . gmake[8]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[8]: Nothing to be done for `all-am'. gmake[8]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[7]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[6]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> ============================================================================ Testsuite summary for libvirt 4.7.0 ============================================================================ # TOTAL: 216 # PASS: 202 # SKIP: 14 # XFAIL: 0 # FAIL: 0 # XPASS: 0 # ERROR: 0 ============================================================================ gmake[5]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[4]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[3]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> Making check in tests gmake[1]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> /usr/bin/gmake gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[2]: Nothing to be done for `all'. gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> /usr/bin/gmake check-TESTS gmake[2]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[3]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> PASS: sockettest PASS: virhostcputest PASS: virbuftest PASS: seclabeltest PASS: commandtest PASS: virhashtest PASS: virconftest PASS: viratomictest PASS: shunloadtest PASS: utiltest PASS: virtimetest PASS: viruritest PASS: viralloctest PASS: virkeyfiletest PASS: virauthconfigtest PASS: virbitmaptest PASS: vircryptotest PASS: vircgrouptest PASS: virpcitest PASS: virendiantest PASS: virfiletest PASS: virfilecachetest PASS: viriscsitest PASS: virfirewalltest PASS: virkeycodetest PASS: virlockspacetest PASS: virlogtest PASS: virrotatingfiletest PASS: virshtest PASS: virstringtest PASS: virportallocatortest PASS: sysinfotest PASS: virkmodtest PASS: vircapstest PASS: domainconftest PASS: domaincapstest PASS: virhostdevtest PASS: virschematest PASS: virtypedparamtest PASS: virnetdevtest FAIL: vshtabletest PASS: virnetsockettest PASS: virnetmessagetest PASS: virnetdaemontest PASS: virnetserverclienttest PASS: fchosttest PASS: virnettlssessiontest PASS: scsihosttest PASS: vircaps2xmltest PASS: virnettlscontexttest PASS: virresctrltest PASS: fdstreamtest PASS: virsystemdtest PASS: virdbustest PASS: virpolkittest PASS: securityselinuxtest PASS: viridentitytest PASS: securityselinuxlabeltest PASS: qemuargv2xmltest PASS: qemuxml2xmltest PASS: domainsnapshotxml2xmltest PASS: qemuxml2argvtest PASS: qemumonitorjsontest PASS: qemuhotplugtest PASS: qemucaps2xmltest PASS: qemucapabilitiestest PASS: qemumemlocktest PASS: qemucommandutiltest PASS: qemuagenttest PASS: lxcxml2xmltest PASS: qemumigparamstest PASS: qemublocktest PASS: openvzutilstest PASS: esxutilstest PASS: lxcconf2xmltest PASS: vboxsnapshotxmltest PASS: vmx2xmltest PASS: xml2vmxtest PASS: vmwarevertest PASS: virjsontest PASS: networkxml2xmltest PASS: networkxml2xmlupdatetest PASS: networkxml2firewalltest PASS: networkxml2conftest PASS: nwfilterxml2xmltest PASS: virnwfilterbindingxml2xmltest PASS: nwfilterebiptablestest PASS: nwfilterxml2firewalltest PASS: virstorageutiltest PASS: storagevolxml2argvtest PASS: nsstest PASS: virscsitest PASS: nssguesttest PASS: storagevolxml2xmltest PASS: storagepoolxml2xmltest PASS: interfacexml2xmltest PASS: nodedevxml2xmltest PASS: virstoragetest PASS: metadatatest PASS: secretxml2xmltest PASS: genericxml2xmltest PASS: virusbtest PASS: virnetdevbandwidthtest PASS: cputest PASS: virdrivermoduletest PASS: eventtest PASS: objecteventtest PASS: virmacmaptest PASS: libvirtd-pool PASS: virsh-define-dev-segfault PASS: libvirtd-fail PASS: virsh-cpuset PASS: virsh-int-overflow PASS: virsh-read-bufsiz PASS: virsh-read-non-seekable PASS: virsh-schedinfo PASS: virsh-self-test PASS: virsh-start PASS: virt-admin-self-test PASS: virsh-undefine PASS: virsh-vcpupin PASS: virsh-uriprecedence PASS: virsh-optparse gmake[4]: Entering directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[4]: Nothing to be done for `all'. gmake[4]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> ============================================================================ Testsuite summary for libvirt 4.7.0 ============================================================================ # TOTAL: 123 # PASS: 122 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ gmake[3]: *** [test-suite.log] Error 1 gmake[3]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[2]: *** [check-TESTS] Error 2 gmake[2]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake[1]: *** [check-am] Error 2 gmake[1]: Leaving directory `<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-centos-7/ws/…'> gmake: *** [check-recursive] Error 1 + cat tests/test-suite.log ========================================= libvirt 4.7.0: tests/test-suite.log ========================================= # TOTAL: 123 # PASS: 122 # SKIP: 0 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 FAIL: vshtabletest ================== TEST: vshtabletest 1) testVshTableNew ... libvirt: error : internal error: Table row cannot be empty OK 2) testVshTableHeader ... OK 3) testVshTableRowAppend ... libvirt: error : internal error: Incorrect number of cells in a table row OK 4) testUnicode ... Offset 0 Expect [ Id 名稱 государство ----------------------------------------- 1 fedora28 running 2 🙊🙉🙈rhel7.5🙆🙆🙅 running ] Actual [ Id 名稱 государство ----------------------------------------------------------------------------------------------------------------------------- 1 fedora28 running 2 \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xffrhel7.5\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff running ] ... FAILED 5) testUnicodeArabic ... OK 6) testUnicodeZeroWidthChar ... OK 7) testUnicodeCombiningChar ... OK 8) testUnicodeNonPrintableChar ... OK 9) testNTables ... OK + exit 1 Build step 'Execute shell' marked build as failure

1 16

[Libvirt-ci] Build failed in Jenkins: libvirt-master-check » libvirt-freebsd-10 #1329
by ci＠centos.org 29 Aug '18

29 Aug '18

See <https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/1…> ------------------------------------------ [...truncated 48.27 KB...] PASS: virrotatingfiletest PASS: virlogtest PASS: virstringtest SKIP: virportallocatortest PASS: sysinfotest SKIP: virkmodtest PASS: vircapstest PASS: domaincapstest PASS: domainconftest SKIP: virhostdevtest SKIP: virnetdevtest PASS: virtypedparamtest FAIL: vshtabletest PASS: virnetmessagetest PASS: virnetsockettest PASS: virnetdaemontest PASS: virschematest SKIP: virnettlscontexttest PASS: virnetserverclienttest SKIP: virnettlssessiontest PASS: virdbustest PASS: fdstreamtest PASS: virpolkittest SKIP: virsystemdtest PASS: qemuxml2xmltest PASS: qemuargv2xmltest PASS: domainsnapshotxml2xmltest PASS: qemuxml2argvtest PASS: qemumonitorjsontest PASS: qemuagenttest PASS: qemuhotplugtest PASS: qemucaps2xmltest PASS: qemumemlocktest PASS: qemucommandutiltest PASS: qemublocktest PASS: qemumigparamstest PASS: esxutilstest PASS: vboxsnapshotxmltest PASS: vmx2xmltest PASS: xml2vmxtest PASS: vmwarevertest PASS: bhyvexml2argvtest PASS: bhyvexml2xmltest PASS: bhyveargv2xmltest PASS: virjsontest PASS: qemucapabilitiestest PASS: networkxml2xmltest PASS: networkxml2xmlupdatetest PASS: networkxml2conftest SKIP: networkxml2firewalltest PASS: nwfilterxml2xmltest PASS: virnwfilterbindingxml2xmltest PASS: storagevolxml2argvtest PASS: virstorageutiltest PASS: nsstest PASS: nssguesttest PASS: storagepoolxml2xmltest PASS: storagevolxml2xmltest PASS: nodedevxml2xmltest PASS: interfacexml2xmltest PASS: metadatatest PASS: secretxml2xmltest PASS: genericxml2xmltest PASS: eventtest PASS: virdrivermoduletest PASS: objecteventtest PASS: virmacmaptest PASS: libvirtd-fail PASS: libvirtd-pool PASS: cputest PASS: virsh-define-dev-segfault PASS: virsh-cpuset SKIP: virsh-optparse PASS: virsh-int-overflow PASS: virsh-read-non-seekable PASS: virsh-read-bufsiz PASS: virsh-schedinfo PASS: virt-admin-self-test PASS: virsh-self-test PASS: virsh-start PASS: virsh-undefine PASS: virsh-uriprecedence PASS: virsh-vcpupin PASS: virshtest ============================================================================ Testsuite summary for libvirt 4.7.0 ============================================================================ # TOTAL: 110 # PASS: 95 # SKIP: 14 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 ============================================================================ See tests/test-suite.log Please report to libvir-list(a)redhat.com ============================================================================ gmake[3]: *** [Makefile:5838: test-suite.log] Error 1 gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake[2]: *** [Makefile:5946: check-TESTS] Error 2 gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake[1]: *** [Makefile:6951: check-am] Error 2 gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-master-check/systems=libvirt-freebsd-10/w…'> gmake: *** [Makefile:2108: check-recursive] Error 1 + cat tests/test-suite.log ========================================= libvirt 4.7.0: tests/test-suite.log ========================================= # TOTAL: 110 # PASS: 95 # SKIP: 14 # XFAIL: 0 # FAIL: 1 # XPASS: 0 # ERROR: 0 .. contents:: :depth: 2 SKIP: virhostcputest ==================== SKIP virhostcputest (exit status: 77) SKIP: shunloadtest ================== SKIP shunloadtest (exit status: 77) SKIP: vircgrouptest =================== SKIP vircgrouptest (exit status: 77) SKIP: virpcitest ================ SKIP virpcitest (exit status: 77) SKIP: virfirewalltest ===================== SKIP virfirewalltest (exit status: 77) SKIP: virportallocatortest ========================== SKIP virportallocatortest (exit status: 77) SKIP: virkmodtest ================= SKIP virkmodtest (exit status: 77) SKIP: virhostdevtest ==================== SKIP virhostdevtest (exit status: 77) SKIP: virnetdevtest =================== SKIP virnetdevtest (exit status: 77) FAIL: vshtabletest ================== TEST: vshtabletest 1) testVshTableNew ... libvirt: error : internal error: Table row cannot be empty OK 2) testVshTableHeader ... OK 3) testVshTableRowAppend ... libvirt: error : internal error: Incorrect number of cells in a table row OK 4) testUnicode ... Offset 0 Expect [ Id �� ----------------------------------------- 1 fedora28 running 2 ��rhel7.5�� running ] Actual [ Id �� ----------------------------------------------------------------------------------------------------------------------------- 1 fedora28 running 2 \xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xffrhel7.5\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff\xff running ] ... FAILED 5) testUnicodeArabic ... Offset 0 Expect [ �� ------------------------------------------------------------------------------------------- 1 �� , �� , �� . �� , �� ] Actual [ �� ------------------------------------------------------------------------------------------- 1 �� , �� , �� . �� , �� ] ... FAILED 6) testUnicodeZeroWidthChar ... Offset 0 Expect [ I��d Name ��Status -------------------------- 1�� fedora28 run��ning 2 rhel7.5 running ] Actual [ I��d Name ��Status ---------------------------- 1�� fedora28 run��ning 2 rhel7.5 running ] ... FAILED 7) testUnicodeCombiningChar ... OK 8) testUnicodeNonPrintableChar ... OK 9) testNTables ... OK FAIL vshtabletest (exit status: 1) SKIP: virnettlscontexttest ========================== SKIP virnettlscontexttest (exit status: 77) SKIP: virnettlssessiontest ========================== SKIP virnettlssessiontest (exit status: 77) SKIP: virsystemdtest ==================== SKIP virsystemdtest (exit status: 77) SKIP: networkxml2firewalltest ============================= SKIP networkxml2firewalltest (exit status: 77) SKIP: virsh-optparse ==================== ../../tests/virsh-optparse: skipping test: This test is very expensive, so it is disabled by default. To run it anyway, rerun: make check VIR_TEST_EXPENSIVE=1 SKIP virsh-optparse (exit status: 77) + exit 1 Build step 'Execute shell' marked build as failure

1 16