- CI - libvirt List Archives

[Libvirt-ci] Passed: libvirt/libvirt#159 (master - c245f55)
by Travis CI 02 Jun '17

02 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #159 Status: Passed Duration: 18 minutes and 39 seconds Commit: c245f55 (master) Author: Peter Krempa Message: qemu: Don't error out if allocation info can't be queried qemuDomainGetBlockInfo would error out if qemu did not report 'wr_highest_offset'. This usually does not happen, but can happen briefly during active layer block commit. There's no need to report the error, we can simply report that the disk is fully alocated at that point. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452045 View the changeset: https://github.com/libvirt/libvirt/compare/4fd5c2fbce83...c245f558369d View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238704244?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#158 (master - 4fd5c2f)
by Travis CI 02 Jun '17

02 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #158 Status: Errored Duration: 23 minutes and 42 seconds Commit: 4fd5c2f (master) Author: Julio Faracco Message: util: remove dead code inside virstoragefile The host address or the socket path have already been checked at the begining of the function virStorageSourceParseNBDColonString(). So, when the parameter is not a unix socket, there is no reason to check the address again because if it does not exists, the logic will fail in the first IF conditional. Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com> View the changeset: https://github.com/libvirt/libvirt/compare/8b994d5189b8...4fd5c2fbce83 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238646665?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#157 (v3.4.0 - 8955b04)
by Travis CI 02 Jun '17

02 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #157 Status: Passed Duration: 33 minutes and 53 seconds Commit: 8955b04 (v3.4.0) Author: Daniel Veillard Message: Release of libvirt-3.4.0 * docs/news.xml: updated for the release * po/*.po*: regenerated View the changeset: https://github.com/libvirt/libvirt/compare/v3.4.0 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238643073?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#156 (master - 8b994d5)
by Travis CI 02 Jun '17

02 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #156 Status: Errored Duration: 19 minutes and 2 seconds Commit: 8b994d5 (master) Author: Peter Krempa Message: Post-release version bump to 3.5.0 View the changeset: https://github.com/libvirt/libvirt/compare/316022183b0f...8b994d5189b8 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238643027?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#155 (master - 3160221)
by Travis CI 01 Jun '17

01 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #155 Status: Fixed Duration: 18 minutes and 39 seconds Commit: 3160221 (master) Author: Daniel P. Berrange Message: Fix closing XML element in news file Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/f546d09362a0...316022183b0f View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238275504?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#154 (master - f546d09)
by Travis CI 01 Jun '17

01 Jun '17

Build Update for libvirt/libvirt ------------------------------------- Build: #154 Status: Broken Duration: 19 minutes and 44 seconds Commit: f546d09 (master) Author: Martin Kletzander Message: news: Minor cleanups Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/3bab51e05656...f546d09362a0 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/238261741?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#148 (v3.4.0-rc2 - f9b69c8)
by Travis CI 30 May '17

30 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #148 Status: Passed Duration: 19 minutes and 7 seconds Commit: f9b69c8 (v3.4.0-rc2) Author: Erik Skultety Message: qemu: json: Fix daemon crash on handling domain shutdown event commit a8eba5036 added further checking of the guest shutdown cause, but this enhancement is available since qemu 2.10, causing a crash because of a NULL pointer dereference on older qemus. Thread 1 "libvirtd" received signal SIGSEGV, Segmentation fault. 0x00007ffff72441af in virJSONValueObjectGet (object=0x0, key=0x7fffd5ef11bf "guest") at util/virjson.c:769 769 if (object->type != VIR_JSON_TYPE_OBJECT) (gdb) bt 0 in virJSONValueObjectGet 1 in virJSONValueObjectGetBoolean 2 in qemuMonitorJSONHandleShutdown 3 in qemuMonitorJSONIOProcessEvent 4 in qemuMonitorJSONIOProcessLine 5 in qemuMonitorJSONIOProcess 6 in qemuMonitorIOProcess Signed-off-by: Erik Skultety <eskultet(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/v3.4.0-rc2 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/237689827?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#143 (v3.4.0-rc1 - 981e2c7)
by Travis CI 27 May '17

27 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #143 Status: Passed Duration: 14 minutes and 20 seconds Commit: 981e2c7 (v3.4.0-rc1) Author: Roman Bogorodskiy Message: util: fix virfcp build on non-Linux - Include virerror.h for virReportSystemError - Rename stub functions to match original function names View the changeset: https://github.com/libvirt/libvirt/compare/v3.4.0-rc1 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/236706371?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#142 (master - 981e2c7)
by Travis CI 26 May '17

26 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #142 Status: Fixed Duration: 23 minutes and 50 seconds Commit: 981e2c7 (master) Author: Roman Bogorodskiy Message: util: fix virfcp build on non-Linux - Include virerror.h for virReportSystemError - Rename stub functions to match original function names View the changeset: https://github.com/libvirt/libvirt/compare/ca30bed9f7ab...981e2c709734 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/236434799?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#141 (master - ca30bed)
by Travis CI 26 May '17

26 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #141 Status: Broken Duration: 11 minutes and 46 seconds Commit: ca30bed (master) Author: Bjoern Walk Message: docs: update news.xml Mention CCW and fc_remote_port capablities in the news.xml file. Reviewed-by: Boris Fiuczynski <fiuczy(a)linux.vnet.ibm.com> Signed-off-by: Bjoern Walk <bwalk(a)linux.vnet.ibm.com> View the changeset: https://github.com/libvirt/libvirt/compare/a8eba5036cb4...ca30bed9f7ab View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/236407386?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#141 (master - ca30bed)
by Travis CI 26 May '17

26 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #141 Status: Broken Duration: 13 minutes and 33 seconds Commit: ca30bed (master) Author: Bjoern Walk Message: docs: update news.xml Mention CCW and fc_remote_port capablities in the news.xml file. Reviewed-by: Boris Fiuczynski <fiuczy(a)linux.vnet.ibm.com> Signed-off-by: Bjoern Walk <bwalk(a)linux.vnet.ibm.com> View the changeset: https://github.com/libvirt/libvirt/compare/a8eba5036cb4...ca30bed9f7ab View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/236407386?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#126 (master - 065e89c)
by Travis CI 24 May '17

24 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #126 Status: Fixed Duration: 21 minutes and 11 seconds Commit: 065e89c (master) Author: Pavel Hrdina Message: conf: fix build issue caused by shadowing global declaration Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/97863780e884...065e89cf8bac View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/235627174?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#125 (master - 9786378)
by Travis CI 24 May '17

24 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #125 Status: Still Failing Duration: 15 minutes and 57 seconds Commit: 9786378 (master) Author: Peter Krempa Message: rpc: Bump maximum message size to 32M While most of the APIs are okay with 16M messages, the bulk stats API can run into the limit in big configurations. Before we devise a new plan for this, bump this limit slightly to accomodate some more configs. View the changeset: https://github.com/libvirt/libvirt/compare/0c53382d820a...97863780e884 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/235617202?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#124 (master - 0c53382)
by Travis CI 24 May '17

24 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #124 Status: Broken Duration: 17 minutes and 50 seconds Commit: 0c53382 (master) Author: Pavel Hrdina Message: conf: don't iterate over backcompat console in virDomainChrDefForeach If the first console is just a copy of the first serial device we don't need to iterate over the same device twice in order to perform actions like security labeling, cgroup configuring, etc. Currently only security SELinux manager was aware of this fact. Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/f8912d05279a...0c53382d820a View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/235592262?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#108 (master - 2f69dd3)
by Travis CI 19 May '17

19 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #108 Status: Fixed Duration: 17 minutes and 54 seconds Commit: 2f69dd3 (master) Author: Michal Privoznik Message: virfiletest: include linux/falloc.h On systems with older glibc including fcntl.h for getting FALLOC_FL_PUNCH_HOLE defined is not enough. We must also include linux/falloc.h. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/85d62624c5d0...2f69dd36bb9d View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233993724?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#107 (master - 85d6262)
by Travis CI 19 May '17

19 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #107 Status: Still Failing Duration: 18 minutes and 4 seconds Commit: 85d6262 (master) Author: Peter Krempa Message: conf: Don't assign value from ..TypeFromString directly to enum Enums are unsigned, so it's impossible to check whether the helper returned -1 for invalid conversions. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452454 View the changeset: https://github.com/libvirt/libvirt/compare/dd875fb326ec...85d62624c5d0 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233966317?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#106 (master - dd875fb)
by Travis CI 19 May '17

19 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #106 Status: Still Failing Duration: 18 minutes and 48 seconds Commit: dd875fb (master) Author: Felix Geyer Message: apparmor, virt-aa-helper: Explicit denies for host devices Add explicit denies for disk devices to avoid cluttering dmesg with (acceptable) denials. Signed-off-by: Christian Ehrhardt <christian.ehrhardt(a)canonical.com> Signed-off-by: Stefan Bader <stefan.bader(a)canonical.com> Acked-by: Guido Günther <agx(a)sigxcpu.org> View the changeset: https://github.com/libvirt/libvirt/compare/6ff99e95771b...dd875fb326ec View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233920835?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#105 (master - 6ff99e9)
by Travis CI 19 May '17

19 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #105 Status: Still Failing Duration: 18 minutes and 41 seconds Commit: 6ff99e9 (master) Author: Peter Krempa Message: qemu: monitor: Don't bother extracting vCPU halted state in text monitor The code causes the 'offset' variable to be overwritten (possibly with NULL if neither of the vCPUs is halted) which causes a crash since the variable is still used after that part. Additionally there's a bug, since strstr() would look up the '(halted)' string in the whole string rather than just the currently processed line the returned data is completely bogus. Rather than switching to single line parsing let's remove the code altogether since it has a commonly used JSON monitor alternative and the data itself is not very useful to report. The code was introduced in commit cc5e695bde Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1452106 View the changeset: https://github.com/libvirt/libvirt/compare/6a12907d86a9...6ff99e95771b View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233916960?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#104 (master - 6a12907)
by Travis CI 19 May '17

19 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #104 Status: Still Failing Duration: 17 minutes and 37 seconds Commit: 6a12907 (master) Author: Julio Faracco Message: datatypes: removing unnecessary return statement. There is a wrong 'return' statement after a 'goto' statement inside the function virConnectCloseCallbackDataRegister(). This commit only removes the 'return'. Signed-off-by: Julio Faracco <jcfaracco(a)gmail.com> View the changeset: https://github.com/libvirt/libvirt/compare/0da4a635bc00...6a12907d86a9 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233847952?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#103 (master - 0da4a63)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #103 Status: Still Failing Duration: 18 minutes and 21 seconds Commit: 0da4a63 (master) Author: Michal Privoznik Message: virStream: Forbid negative seeks Currently, we don't assign any meaning to that. Our current view on virStream is that it's merely a pipe. And pipes don't support seeking. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/de4b46e1e126...0da4a635bc00 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233628539?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#102 (master - de4b46e)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #102 Status: Still Failing Duration: 17 minutes and 37 seconds Commit: de4b46e (master) Author: Erik Skultety Message: nodedev: mdev: Fix build caused by symbol shadowing GCC 4.6 complains about a local declaration shadowing a global symbol. Signed-off-by: Erik Skultety <eskultet(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/506acac87f06...de4b46e1e126 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233623276?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#101 (master - 506acac)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #101 Status: Still Failing Duration: 18 minutes and 47 seconds Commit: 506acac (master) Author: Wang King Message: util: Do not leak @handles in stop netlink event service Commit e3ba4025 introduced srv->handles and VIR_RESIZE_N to allocate @handles as necessary, but did not free the handles during when calling virNetlinkEventServiceStop. View the changeset: https://github.com/libvirt/libvirt/compare/a0a0b3cf71cb...506acac87f06 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233597856?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#100 (master - a0a0b3c)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #100 Status: Still Failing Duration: 17 minutes and 33 seconds Commit: a0a0b3c (master) Author: Erik Skultety Message: docs: Document the mediated devices within the nodedev driver https://bugzilla.redhat.com/show_bug.cgi?id=1452072 Signed-off-by: Erik Skultety <eskultet(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/1128769f9ee5...a0a0b3cf71cb View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233593642?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#99 (master - 1128769)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #99 Status: Still Failing Duration: 15 minutes and 4 seconds Commit: 1128769 (master) Author: Marek Marczykowski-Górecki Message: pci: fix link maximum speed detection Commit 8e09663 "pci: recognize/report GEN4 (PCIe 4.0) card 16GT/s Link speed" introduced another speed into enum, but mistakenly also altered field width, so one bit of link width was included there. Signed-off-by: Marek Marczykowski-Górecki <marmarek(a)invisiblethingslab.com> View the changeset: https://github.com/libvirt/libvirt/compare/7823e2561b59...1128769f9ee5 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233551060?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#98 (master - 7823e25)
by Travis CI 18 May '17

18 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #98 Status: Broken Duration: 17 minutes and 31 seconds Commit: 7823e25 (master) Author: Michal Privoznik Message: virsh: Implement sparse stream to vol-upload Similarly to previous commit, implement sparse streams feature for vol-upload. This is, however, slightly different approach, because we must implement a function that will tell us whether we are in a data section or in a hole. But there's no magic hidden in here. Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/ca21d75d25e0...7823e2561b59 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/233510234?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#93 (master - 3102066)
by Travis CI 15 May '17

15 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #93 Status: Fixed Duration: 39 minutes and 31 seconds Commit: 3102066 (master) Author: Daniel P. Berrange Message: remove hack for debian etch limits.h The debian etch distro was end-of-life a long time ago so we no longer need the ULLONG_MAX hack. In any case gnulib now provides an equivalent fix by default, and so our definition now triggers syntax-check rule failure src/internal.h:# define ULLONG_MAX ULONG_LONG_MAX maint.mk: define the above via some gnulib .h file maint.mk:843: recipe for target 'sc_prohibit_always-defined_macros' failed Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/52de9b28db73...31020664e961 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/232496128?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#92 (master - 52de9b2)
by Travis CI 15 May '17

15 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #92 Status: Broken Duration: 28 minutes and 6 seconds Commit: 52de9b2 (master) Author: Daniel P. Berrange Message: maint: update to latest gnulib This pulls in the fixes for poll() on Win32 which finally makes the remote driver work again. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/935d927aa881...52de9b28db73 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/232473164?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Canceled: libvirt/libvirt#86 (master - bb9055b)
by Travis CI 13 May '17

13 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #86 Status: Canceled Duration: 6 hours, 40 minutes, and 18 seconds Commit: bb9055b (master) Author: Nikolay Shirokovskiy Message: docs: install html fonts and related View the changeset: https://github.com/libvirt/libvirt/compare/c390f55e4b8c...bb9055b87edb View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/231569149?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#86 (master - bb9055b)
by Travis CI 12 May '17

12 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #86 Status: Errored Duration: 6 hours, 40 minutes, and 18 seconds Commit: bb9055b (master) Author: Nikolay Shirokovskiy Message: docs: install html fonts and related View the changeset: https://github.com/libvirt/libvirt/compare/c390f55e4b8c...bb9055b87edb View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/231569149?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#73 (master - 7d1b939)
by Travis CI 10 May '17

10 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #73 Status: Passed Duration: 25 minutes and 3 seconds Commit: 7d1b939 (master) Author: Peter Krempa Message: qemu: driver: Fix usage of qemuOpenFile The function returns -errno on failure, not only -1. View the changeset: https://github.com/libvirt/libvirt/compare/1e9cf6e09ce2...7d1b93906c83 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/230773080?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#72 (master - 1e9cf6e)
by Travis CI 10 May '17

10 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #72 Status: Errored Duration: 27 minutes and 54 seconds Commit: 1e9cf6e (master) Author: Jiri Denemark Message: conf: Check CPU cache for ABI stability Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> Reviewed-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/1a77b97c7f38...1e9cf6e09ce2 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/230684346?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#68 (master - 058bf55)
by Travis CI 09 May '17

09 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #68 Status: Fixed Duration: 19 minutes and 38 seconds Commit: 058bf55 (master) Author: Roman Bogorodskiy Message: tests: fix virfilewrapper If __lxstat() and __xstat() functions are not available, build fails with: CC virfilewrapper.o virfilewrapper.c:180:5: error: no previous prototype for function '__lxstat' [-Werror,-Wmissing-prototypes] int __lxstat(int ver, const char *path, struct stat *sb) ^ virfilewrapper.c:208:5: error: no previous prototype for function '__xstat' [-Werror,-Wmissing-prototypes] int __xstat(int ver, const char *path, struct stat *sb) Luckily, we already check presence of these functions in configure using AC_CHECK_FUNCS, so just don't wrap these if they're not available. Signed-off-by: Roman Bogorodskiy <bogorodskiy(a)gmail.com> View the changeset: https://github.com/libvirt/libvirt/compare/40824174258a...058bf5549f66 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/230343200?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Still Failing: libvirt/libvirt#67 (master - 4082417)
by Travis CI 09 May '17

09 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #67 Status: Still Failing Duration: 17 minutes and 24 seconds Commit: 4082417 (master) Author: Martin Kletzander Message: util: Define SYSFS_SYSTEM_PATH unconditionally in virhostcpu The code is already prepared to handle the non-existence of it. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/0e3ff22c6fcc...40824174258a View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/230328767?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#66 (master - 0e3ff22)
by Travis CI 09 May '17

09 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #66 Status: Broken Duration: 14 minutes and 41 seconds Commit: 0e3ff22 (master) Author: Martin Kletzander Message: tests: Add resctrl test for vircaps2xmltest Add info from yet another machine, this time with resctrl data so that we can extend tests easily in a test-driven way. Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/8fc72e1c72a9...0e3ff22c6fcc View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/230315073?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#60 (v3.3.0 - d7acab0)
by Travis CI 05 May '17

05 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #60 Status: Passed Duration: 35 minutes and 15 seconds Commit: d7acab0 (v3.3.0) Author: Daniel Veillard Message: Release of libvirt-3.3.0 * docs/news.xml: updated for release * po/*.po*: regenerated View the changeset: https://github.com/libvirt/libvirt/compare/v3.3.0 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/229265137?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#50 (v3.3.0-rc2 - 42faf31)
by Travis CI 03 May '17

03 May '17

Build Update for libvirt/libvirt ------------------------------------- Build: #50 Status: Passed Duration: 26 minutes and 56 seconds Commit: 42faf31 (v3.3.0-rc2) Author: Jiri Denemark Message: client: Report proper close reason When we get a POLLHUP or VIR_EVENT_HANDLE_HANGUP event for a client, we still want to read from the socket to process any accumulated data. But doing so inevitably results in an error and a call to virNetClientMarkClose before we get to processing the hangup event (and another call to virNetClientMarkClose). However the close reason passed to the second virNetClientMarkClose call is ignored because another one was already set. We need to pass the correct close reason when marking the socket to be closed for the first time. https://bugzilla.redhat.com/show_bug.cgi?id=1373859 Signed-off-by: Jiri Denemark <jdenemar(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/v3.3.0-rc2 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/228376192?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#44 (v3.3.0-rc1 - 2fdfe0c)
by Travis CI 28 Apr '17

28 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #44 Status: Passed Duration: 20 minutes and 12 seconds Commit: 2fdfe0c (v3.3.0-rc1) Author: Jim Fehlig Message: news: Document libxl nested HVM support Nested HVM support in the libxl driver is a news-worthy improvement for libvirt 3.3.0. Reviewed-by: Pavel Hrdina <phrdina(a)redhat.com> Signed-off-by: Jim Fehlig <jfehlig(a)suse.com> View the changeset: https://github.com/libvirt/libvirt/compare/v3.3.0-rc1 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/226954950?utm_source=email&utm… -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#22 (master - 1acce5c)
by Travis CI 26 Apr '17

26 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #22 Status: Fixed Duration: 18 minutes and 0 seconds Commit: 1acce5c (master) Author: Daniel P. Berrange Message: Update keycodemapdb submodule for python2 compat fixes There were a few bugs in keycodemap tool that broke it when run on python circa 2.7.5 or older, which affected RHEL builds. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/e6c3b59c193e...1acce5c853b9 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/225960521 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#21 (master - e6c3b59)
by Travis CI 25 Apr '17

25 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #21 Status: Broken Duration: 29 minutes and 29 seconds Commit: e6c3b59 (master) Author: Daniel P. Berrange Message: Add ability to generate man page describing key code names & values Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/ab54d5f15239...e6c3b59c193e View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/225758805 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Fixed: libvirt/libvirt#7 (master - dfda3a8)
by Travis CI 21 Apr '17

21 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #7 Status: Fixed Duration: 16 minutes and 16 seconds Commit: dfda3a8 (master) Author: Daniel P. Berrange Message: docs: fix typo in closing HTML element Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/fcef44728dff...dfda3a8ed988 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/224325199 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Broken: libvirt/libvirt#6 (master - fcef447)
by Travis CI 21 Apr '17

21 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #6 Status: Broken Duration: 15 minutes and 45 seconds Commit: fcef447 (master) Author: Martin Kletzander Message: Set coalesce settings for domain interfaces This patch makes use of the virNetDevSetCoalesce() function to make appropriate settings effective for devices that support them. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1414627 Signed-off-by: Martin Kletzander <mkletzan(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/42000bf7e554...fcef44728dff View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/224315835 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Passed: libvirt/libvirt#4 (master - 6b3fb86)
by Travis CI 20 Apr '17

20 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #4 Status: Passed Duration: 18 minutes and 26 seconds Commit: 6b3fb86 (master) Author: Jim Fehlig Message: Increase default task limit for libvirtd libvirtd can spawn threads/tasks when creating new domains for some hypervisors such as Xen's libxl driver, quickly reaching the cgroups pids controller default TasksMax setting of 512. When the limit is reached, attempting to create additional domains results in an error from the cgroups pids controller, e.g. kernel: [71282.213347] cgroup: fork rejected by pids controller in /system.slice/libvirtd.service Depending on domain type and configuration, anywhere from 4-7 threads/tasks may be created by libxl when starting a domain. In order to support 4096 domains, similar to commit 27cd763500, increase the TasksMax setting in libvirtd.service to 4096 * 8 = 32768 tasks. View the changeset: https://github.com/libvirt/libvirt/compare/234ac4e18db3...6b3fb86b391d View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/224004191 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#3 (master - 234ac4e)
by Travis CI 20 Apr '17

20 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #3 Status: Errored Duration: 10 minutes and 39 seconds Commit: 234ac4e (master) Author: Daniel P. Berrange Message: Fix error reporting when poll returns POLLHUP/POLLERR In the RPC client event loop code, if poll() returns only a POLLHUP or POLLERR status, then we end up reporting a bogus error message: error: failed to connect to the hypervisor error: An error occurred, but the cause is unknown We do actually report an error, but we virNetClientMarkClose method has already captured the error status before we report it, so the real error gets thrown away. The key fix is to report the error before calling virNetClientMarkClose(). In changing this, we also split out reporting of POLLHUP vs POLLERR to make any future bugs easier to diagnose. Signed-off-by: Daniel P. Berrange <berrange(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/355f5ab99899...234ac4e18db3 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/223886495 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#2 (master - 355f5ab)
by Travis CI 20 Apr '17

20 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #2 Status: Errored Duration: 12 minutes and 30 seconds Commit: 355f5ab (master) Author: Peter Krempa Message: qemu: hotplug: Don't save status XML when monitor is closed In the vcpu hotplug code if exit from the monitor failed we would still attempt to save the status XML. When the daemon is terminated the monitor socket is closed. In such case, the written status XML would not contain the monitor path and thus be invalid. Avoid this issue by only saving status XML on success of the monitor command. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1439452 View the changeset: https://github.com/libvirt/libvirt/compare/90acbc76ece8...355f5ab99899 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/223877821 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Errored: libvirt/libvirt#1 (master - 90acbc7)
by Travis CI 20 Apr '17

20 Apr '17

Build Update for libvirt/libvirt ------------------------------------- Build: #1 Status: Errored Duration: 11 minutes and 58 seconds Commit: 90acbc7 (master) Author: Pavel Hrdina Message: qemu_domain: use correct default USB controller on ppc64 The history of USB controller for ppc64 guest is complex and goes back to libvirt 1.3.1 where the fun started. Prior Libvirt 1.3.1 if no model for USB controller was specified we've simply passed "-usb" on QEMU command line. Since Libvirt 1.3.1 there is a patch (8156493d8db) that fixes this issue by using "-device pci-ohci,..." but it breaks migration with older Libvirts which was agreed that's acceptable. However this patch didn't reflect this change in the domain XML and the model was still missing. Since Libvirt 2.2.0 there is a patch (f55eaccb0c5) that fixes the issue with not setting the USB model into domain XML which we need to know about to not break the migration and since the default model was *pci-ohci* it was used as default in this patch as well. This patch tries to take all the previous changes into account and also change the default for newly defined domains that don't specify any model for USB controller. The VIR_DOMAIN_DEF_PARSE_ABI_UPDATE is set only if new domain is defined or new device is added into a domain which means that in all other cases we will use the old *pci-ohci* model instead of the better and not broken *nec-usb-xhci* model. Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=1373184 Signed-off-by: Pavel Hrdina <phrdina(a)redhat.com> View the changeset: https://github.com/libvirt/libvirt/compare/dd81f5684235...90acbc76ece8 View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/223851525 -- You can configure recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications

1 0

[Libvirt-ci] Testing
by Libvirt CI 04 Jul '16

04 Jul '16

Testing Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0