Build failed in Jenkins: libvirt-build » libvirt-freebsd-11 #1201
by ci@centos.org
See <https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/1201/d...>
Changes:
[jtomko] syntax-check: inclusion rule for src/hypervisor
[jtomko] conf: move virHostdevIs functions
[jtomko] virhostdev: move to src/hypervisor
[jtomko] virclosecallbacks: move to src/hypervisor
------------------------------------------
[...truncated 31.16 KB...]
configure: OpenVZ: no
configure: VMware: yes
configure: VBox: yes
configure: libxl: no
configure: LXC: no
configure: ESX: yes
configure: Hyper-V: no
configure: vz: no
configure: Bhyve: yes
configure: Test: yes
configure: Remote: yes
configure: Network: yes
configure: Libvirtd: yes
configure: Interface: no
configure:
configure: Storage Drivers
configure:
configure: Dir: yes
configure: FS: no
configure: NetFS: no
configure: LVM: no
configure: iSCSI: no
configure: iscsi-direct: no
configure: SCSI: no
configure: mpath: no
configure: Disk: no
configure: RBD: no
configure: Sheepdog: no
configure: Gluster: no
configure: ZFS: yes
configure: Virtuozzo storage: no
configure:
configure: Security Drivers
configure:
configure: SELinux: no
configure: AppArmor: no
configure:
configure: Driver Loadable Modules
configure:
configure: driver_modules: yes (CFLAGS='' LIBS='')
configure:
configure: Libraries
configure:
configure: acl: no
configure: apparmor: no
configure: attr: no
configure: audit: no
configure: bash_completion: yes (CFLAGS='' LIBS='')
configure: blkid: no
configure: capng: no
configure: curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK -I/usr/local/include ' LIBS='-L/usr/local/lib -lcurl ')
configure: dbus: yes (CFLAGS='-I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include ' LIBS='-L/usr/local/lib -ldbus-1 ')
configure: dlopen: yes (CFLAGS='' LIBS='')
configure: firewalld: no
configure: firewalld-zone: no
configure: fuse: yes (CFLAGS='-I/usr/local/include/fuse -D_FILE_OFFSET_BITS=64 ' LIBS='-L/usr/local/lib -lfuse -pthread ')
configure: glib: yes (CFLAGS='-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -pthread ' LIBS='-L/usr/local/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl ')
configure: glusterfs: no
configure: gnutls: yes (CFLAGS='-I/usr/local/include -I/usr/local/include/p11-kit-1 ' LIBS='-L/usr/local/lib -lgnutls ')
configure: hal: yes (CFLAGS='-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include ' LIBS='-L/usr/local/lib -lhal -ldbus-1 ')
configure: libiscsi: no
configure: libnl: no
configure: libpcap: yes (CFLAGS='-I/usr/local/include' LIBS='-L/usr/local/lib -Wl,-rpath,/usr/local/lib -lpcap')
configure: libssh: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lssh ')
configure: libxl: no
configure: libxml: yes (CFLAGS='-I/usr/local/include/libxml2 ' LIBS='-L/usr/local/lib -lxml2 ')
configure: macvtap: no
configure: netcf: no
configure: NLS: no
configure: nss: yes
configure: numactl: no
configure: openwsman: no
configure: pciaccess: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lpciaccess ')
configure: pm_utils: yes (CFLAGS='' LIBS='')
configure: polkit: yes
configure: rbd: no
configure: readline: yes (CFLAGS='-D_FUNCTION_DEF -I/usr/local/include' LIBS='-L/usr/local/lib -lreadline ')
configure: sanlock: no
configure: sasl: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lsasl2 ')
configure: selinux: no
configure: ssh2: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lssh2 ')
configure: udev: no
configure: virtualport: no
configure: xdr: yes (CFLAGS='' LIBS='')
configure: yajl: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lyajl ')
configure:
configure: Windows
configure:
configure: MinGW: no
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage: no
configure:
configure: Miscellaneous
configure:
configure: Debug: yes
configure: Use -Werror: yes
configure: Warning Flags: -fno-common -W -Wabsolute-value -Waddress -Waddress-of-packed-member -Wall -Wattributes -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wcomment -Wcomments -Wcpp -Wdangling-else -Wdate-time -Wdeprecated-declarations -Wdiv-by-zero -Wdouble-promotion -Wduplicate-decl-specifier -Wempty-body -Wendif-labels -Wexpansion-to-defined -Wextra -Wformat-extra-args -Wformat-nonliteral -Wformat-security -Wformat-y2k -Wformat-zero-length -Wignored-attributes -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wincompatible-pointer-types -Winit-self -Winline -Wint-conversion -Wint-to-pointer-cast -Winvalid-pch -Wlogical-not-parentheses -Wmain -Wmemset-transposed-args -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wnull-dereference -Wodr -Wold-style-definition -Woverflow -Woverride-init -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wreturn-type -Wsequence-point -Wshadow -Wshift-count-negative -Wshift-count-overflow -Wshift-negative-value -Wsizeof-array-argument -Wsizeof-pointer-div -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wswitch -Wswitch-bool -Wtautological-compare -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvla -Wvolatile-register-var -Wwrite-strings -Wno-unused-function -Wno-sign-compare -Wno-typedef-redefinition -Wswitch-enum -Wno-format-nonliteral -Wframe-larger-than=4096 -fstack-protector -Wno-unused-command-line-argument -fexceptions -fasynchronous-unwind-tables -Werror -std=gnu99
configure: DTrace: no
configure: numad: no
configure: Init script: none
configure: Char device locks: no
configure: Default Editor: vi
configure: Loader/NVRAM:
configure: virt-login-shell: no
configure: virt-host-validate: yes
configure: TLS priority: NORMAL
configure:
configure: Developer Tools
configure:
configure: wireshark_dissector: no
configure:
configure: Privileges
configure:
configure: QEMU: root:wheel (!!! running QEMU as root is strongly discouraged !!!)
configure:
Now type 'make' to compile libvirt
+ /usr/local/bin/gmake
GEN configmake.h
/usr/local/bin/gmake all-recursive
gmake[1]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/build'>
Making all in .
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/build'>
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/build'>
Making all in include/libvirt
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
gmake[2]: Nothing to be done for 'all'.
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
Making all in src
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
GEN util/virkeycodetable_linux.h
GEN util/virkeycodetable_osx.h
GEN util/virkeycodetable_atset1.h
GEN util/virkeycodetable_atset2.h
GEN util/virkeycodetable_atset3.h
GEN util/virkeycodetable_xtkbd.h
GEN util/virkeycodetable_usb.h
GEN util/virkeycodetable_win32.h
GEN util/virkeycodetable_qnum.h
GEN util/virkeynametable_linux.h
GEN util/virkeynametable_osx.h
GEN util/virkeynametable_win32.h
GEN security/apparmor/usr.lib.libvirt.virt-aa-helper
GEN security/apparmor/usr.sbin.libvirtd
GEN access/org.libvirt.api.policy
GEN access/viraccessapicheck.h
GEN access/viraccessapicheck.c
GEN access/viraccessapicheckqemu.h
GEN access/viraccessapicheckqemu.c
GEN access/viraccessapichecklxc.h
GEN access/viraccessapichecklxc.c
GEN libvirt_access.xml
GEN libvirt_access_qemu.xml
GEN libvirt_access_lxc.xml
GEN logging/log_protocol.h
GEN logging/log_daemon_dispatch_stubs.h
GEN locking/lock_protocol.h
GEN locking/lock_daemon_dispatch_stubs.h
GEN admin/admin_protocol.h
GEN admin/admin_client.h
GEN admin/admin_server_dispatch_stubs.h
GEN rpc/virnetprotocol.h
GEN .esx_vi_generator.stamp
GEN rpc/virkeepaliveprotocol.h
GEN .hyperv_wmi_generator.stamp
GEN hyperv/hyperv_wmi_classes.generated.typedef
GEN hyperv/hyperv_wmi_classes.generated.h
GEN hyperv/hyperv_wmi_classes.generated.c
GEN lxc/lxc_monitor_protocol.h
GEN lxc/lxc_monitor_dispatch.h
GEN lxc/lxc_controller_dispatch.h
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typetostring
GEN esx/esx_vi_types.generated.typefromstring
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_methods.generated.h
GEN esx/esx_vi_methods.generated.c
GEN esx/esx_vi_methods.generated.macro
GEN esx/esx_vi.generated.h
GEN esx/esx_vi.generated.c
GEN remote/remote_protocol.h
GEN remote/remote_client_bodies.h
GEN remote/lxc_client_bodies.h
GEN remote/lxc_protocol.h
GEN remote/qemu_protocol.h
GEN remote/qemu_client_bodies.h
GEN remote/remote_daemon_dispatch_stubs.h
GEN remote/lxc_daemon_dispatch_stubs.h
GEN remote/qemu_daemon_dispatch_stubs.h
GEN locking/qemu-lockd.conf
GEN vbox/virtvboxd.conf
GEN qemu/virtqemud.conf
GEN bhyve/virtbhyved.conf
GEN network/virtnetworkd.conf
GEN node_device/virtnodedevd.conf
GEN secret/virtsecretd.conf
GEN storage/virtstoraged.conf
GEN remote/libvirtd.conf
GEN remote/virtproxyd.conf
GEN libvirt_access.syms
GEN libvirt_access_qemu.syms
GEN libvirt_access_lxc.syms
GEN admin/libvirt_admin.syms
GEN libvirt_qemu.def
GEN libvirt_lxc.def
GEN libvirtd.qemu.logrotate
GEN libvirtd.lxc.logrotate
GEN libvirtd.libxl.logrotate
GEN libvirtd.logrotate
GEN logging/log_protocol.c
GEN locking/lock_protocol.c
GEN admin/admin_protocol.c
GEN rpc/virnetprotocol.c
GEN rpc/virkeepaliveprotocol.c
GEN lxc/lxc_monitor_protocol.c
GEN remote/remote_protocol.c
GEN remote/lxc_protocol.c
GEN remote/qemu_protocol.c
GEN admin/libvirt_admin.def
GEN libvirt.syms
GEN libvirt.def
/usr/local/bin/gmake all-am
gmake[3]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
CC libvirt_driver_la-driver.lo
CC libvirt_driver_la-datatypes.lo
CC libvirt_driver_la-libvirt.lo
CC libvirt_driver_la-libvirt-domain.lo
CC libvirt_driver_la-libvirt-domain-checkpoint.lo
CC libvirt_driver_la-libvirt-domain-snapshot.lo
In file included from ../../src/libvirt.c CC libvirt_driver_la-libvirt-host.lo
:76:
In file included from ../../src/bhyve/bhyve_driver.h:24:
../../src/bhyve/bhyve_utils.h:29:10: fatal error: 'virclosecallbacks.h' file not found
#include "virclosecallbacks.h"
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
gmake[3]: *** [Makefile:9189: libvirt_driver_la-libvirt.lo] Error 1
gmake[3]: *** Waiting for unfinished jobs....
gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
gmake[2]: *** [Makefile:6403: all] Error 2
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
gmake[1]: *** [Makefile:776: all-recursive] Error 1
gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/build'>
gmake: *** [Makefile:669: all] Error 2
Build step 'Execute shell' marked build as failure
4 years, 6 months
Build failed in Jenkins: libvirt-build » libvirt-freebsd-12 #1201
by ci@centos.org
See <https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/1201/d...>
Changes:
[jtomko] syntax-check: inclusion rule for src/hypervisor
[jtomko] conf: move virHostdevIs functions
[jtomko] virhostdev: move to src/hypervisor
[jtomko] virclosecallbacks: move to src/hypervisor
------------------------------------------
[...truncated 31.10 KB...]
configure: OpenVZ: no
configure: VMware: yes
configure: VBox: yes
configure: libxl: no
configure: LXC: no
configure: ESX: yes
configure: Hyper-V: no
configure: vz: no
configure: Bhyve: yes
configure: Test: yes
configure: Remote: yes
configure: Network: yes
configure: Libvirtd: yes
configure: Interface: no
configure:
configure: Storage Drivers
configure:
configure: Dir: yes
configure: FS: no
configure: NetFS: no
configure: LVM: no
configure: iSCSI: no
configure: iscsi-direct: no
configure: SCSI: no
configure: mpath: no
configure: Disk: no
configure: RBD: no
configure: Sheepdog: no
configure: Gluster: no
configure: ZFS: yes
configure: Virtuozzo storage: no
configure:
configure: Security Drivers
configure:
configure: SELinux: no
configure: AppArmor: no
configure:
configure: Driver Loadable Modules
configure:
configure: driver_modules: yes (CFLAGS='' LIBS='')
configure:
configure: Libraries
configure:
configure: acl: no
configure: apparmor: no
configure: attr: no
configure: audit: no
configure: bash_completion: yes (CFLAGS='' LIBS='')
configure: blkid: no
configure: capng: no
configure: curl: yes (CFLAGS='-DCURL_DISABLE_TYPECHECK -I/usr/local/include ' LIBS='-L/usr/local/lib -lcurl ')
configure: dbus: yes (CFLAGS='-I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include ' LIBS='-L/usr/local/lib -ldbus-1 ')
configure: dlopen: yes (CFLAGS='' LIBS='')
configure: firewalld: no
configure: firewalld-zone: no
configure: fuse: yes (CFLAGS='-I/usr/local/include/fuse -D_FILE_OFFSET_BITS=64 ' LIBS='-L/usr/local/lib -lfuse -pthread ')
configure: glib: yes (CFLAGS='-I/usr/local/include/glib-2.0 -I/usr/local/lib/glib-2.0/include -I/usr/local/include -pthread ' LIBS='-L/usr/local/lib -lgio-2.0 -lgobject-2.0 -lglib-2.0 -lintl ')
configure: glusterfs: no
configure: gnutls: yes (CFLAGS='-I/usr/local/include -I/usr/local/include/p11-kit-1 ' LIBS='-L/usr/local/lib -lgnutls ')
configure: hal: yes (CFLAGS='-DDBUS_API_SUBJECT_TO_CHANGE -I/usr/local/include/hal -I/usr/local/include/dbus-1.0 -I/usr/local/lib/dbus-1.0/include ' LIBS='-L/usr/local/lib -lhal -ldbus-1 ')
configure: libiscsi: no
configure: libnl: no
configure: libpcap: yes (CFLAGS='-I/usr/local/include' LIBS='-L/usr/local/lib -Wl,-rpath,/usr/local/lib -lpcap')
configure: libssh: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lssh ')
configure: libxl: no
configure: libxml: yes (CFLAGS='-I/usr/local/include/libxml2 ' LIBS='-L/usr/local/lib -lxml2 ')
configure: macvtap: no
configure: netcf: no
configure: NLS: no
configure: nss: yes
configure: numactl: no
configure: openwsman: no
configure: pciaccess: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lpciaccess ')
configure: pm_utils: yes (CFLAGS='' LIBS='')
configure: polkit: yes
configure: rbd: no
configure: readline: yes (CFLAGS='-D_FUNCTION_DEF -I/usr/local/include' LIBS='-L/usr/local/lib -lreadline ')
configure: sanlock: no
configure: sasl: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lsasl2 ')
configure: selinux: no
configure: ssh2: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lssh2 ')
configure: udev: no
configure: virtualport: no
configure: xdr: yes (CFLAGS='' LIBS='')
configure: yajl: yes (CFLAGS='-I/usr/local/include ' LIBS='-L/usr/local/lib -lyajl ')
configure:
configure: Windows
configure:
configure: MinGW: no
configure: windres: no
configure:
configure: Test suite
configure:
configure: Coverage: no
configure:
configure: Miscellaneous
configure:
configure: Debug: yes
configure: Use -Werror: yes
configure: Warning Flags: -fno-common -W -Wabsolute-value -Waddress -Waddress-of-packed-member -Wall -Wattributes -Wbuiltin-macro-redefined -Wcast-align -Wchar-subscripts -Wcomment -Wcomments -Wcpp -Wdangling-else -Wdate-time -Wdeprecated-declarations -Wdiv-by-zero -Wdouble-promotion -Wduplicate-decl-specifier -Wempty-body -Wendif-labels -Wexpansion-to-defined -Wextra -Wformat-extra-args -Wformat-nonliteral -Wformat-security -Wformat-y2k -Wformat-zero-length -Wignored-attributes -Wignored-qualifiers -Wimplicit -Wimplicit-function-declaration -Wimplicit-int -Wincompatible-pointer-types -Winit-self -Winline -Wint-conversion -Wint-to-pointer-cast -Winvalid-pch -Wlogical-not-parentheses -Wmain -Wmemset-transposed-args -Wmissing-braces -Wmissing-declarations -Wmissing-field-initializers -Wmissing-include-dirs -Wmissing-prototypes -Wmultichar -Wnarrowing -Wnested-externs -Wnonnull -Wnull-dereference -Wodr -Wold-style-definition -Woverflow -Woverride-init -Wparentheses -Wpointer-arith -Wpointer-sign -Wpointer-to-int-cast -Wpragmas -Wreturn-type -Wsequence-point -Wshadow -Wshift-count-negative -Wshift-count-overflow -Wshift-negative-value -Wsizeof-array-argument -Wsizeof-pointer-div -Wsizeof-pointer-memaccess -Wstrict-aliasing -Wstrict-prototypes -Wswitch -Wswitch-bool -Wtautological-compare -Wtrigraphs -Wtype-limits -Wuninitialized -Wunknown-pragmas -Wunused -Wunused-function -Wunused-label -Wunused-local-typedefs -Wunused-parameter -Wunused-result -Wunused-value -Wunused-variable -Wvarargs -Wvariadic-macros -Wvla -Wvolatile-register-var -Wwrite-strings -Wno-unused-function -Wno-sign-compare -Wno-typedef-redefinition -Wswitch-enum -Wno-format-nonliteral -Wframe-larger-than=4096 -fstack-protector -Wno-unused-command-line-argument -fexceptions -fasynchronous-unwind-tables -Werror -std=gnu99
configure: DTrace: no
configure: numad: no
configure: Init script: none
configure: Char device locks: no
configure: Default Editor: vi
configure: Loader/NVRAM:
configure: virt-login-shell: no
configure: virt-host-validate: yes
configure: TLS priority: NORMAL
configure:
configure: Developer Tools
configure:
configure: wireshark_dissector: no
configure:
configure: Privileges
configure:
configure: QEMU: root:wheel (!!! running QEMU as root is strongly discouraged !!!)
configure:
Now type 'make' to compile libvirt
+ /usr/local/bin/gmake
GEN configmake.h
/usr/local/bin/gmake all-recursive
gmake[1]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/build'>
Making all in .
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/build'>
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/build'>
Making all in include/libvirt
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
gmake[2]: Nothing to be done for 'all'.
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
Making all in src
gmake[2]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
GEN util/virkeycodetable_osx.h
GEN util/virkeycodetable_linux.h
GEN util/virkeycodetable_atset1.h
GEN util/virkeycodetable_atset2.h
GEN util/virkeycodetable_atset3.h
GEN util/virkeycodetable_xtkbd.h
GEN util/virkeycodetable_usb.h
GEN util/virkeycodetable_win32.h
GEN util/virkeycodetable_qnum.h
GEN util/virkeynametable_linux.h
GEN util/virkeynametable_osx.h
GEN util/virkeynametable_win32.h
GEN security/apparmor/usr.lib.libvirt.virt-aa-helper
GEN security/apparmor/usr.sbin.libvirtd
GEN access/org.libvirt.api.policy
GEN access/viraccessapicheck.h
GEN access/viraccessapicheck.c
GEN access/viraccessapicheckqemu.h
GEN access/viraccessapicheckqemu.c
GEN access/viraccessapichecklxc.h
GEN access/viraccessapichecklxc.c
GEN libvirt_access.xml
GEN libvirt_access_qemu.xml
GEN libvirt_access_lxc.xml
GEN logging/log_protocol.h
GEN logging/log_daemon_dispatch_stubs.h
GEN locking/lock_protocol.h
GEN locking/lock_daemon_dispatch_stubs.h
GEN admin/admin_protocol.h
GEN admin/admin_client.h
GEN admin/admin_server_dispatch_stubs.h
GEN rpc/virnetprotocol.h
GEN rpc/virkeepaliveprotocol.h
GEN .esx_vi_generator.stamp
GEN .hyperv_wmi_generator.stamp
GEN lxc/lxc_monitor_protocol.h
GEN hyperv/hyperv_wmi_classes.generated.typedef
GEN hyperv/hyperv_wmi_classes.generated.h
GEN hyperv/hyperv_wmi_classes.generated.c
GEN lxc/lxc_monitor_dispatch.h
GEN esx/esx_vi_types.generated.typedef
GEN esx/esx_vi_types.generated.typeenum
GEN esx/esx_vi_types.generated.typetostring
GEN esx/esx_vi_types.generated.typefromstring
GEN esx/esx_vi_types.generated.h
GEN esx/esx_vi_types.generated.c
GEN esx/esx_vi_methods.generated.h
GEN esx/esx_vi_methods.generated.c
GEN esx/esx_vi_methods.generated.macro
GEN esx/esx_vi.generated.h
GEN esx/esx_vi.generated.c
GEN remote/remote_protocol.h
GEN lxc/lxc_controller_dispatch.h
GEN remote/remote_client_bodies.h
GEN remote/lxc_protocol.h
GEN remote/lxc_client_bodies.h
GEN remote/qemu_protocol.h
GEN remote/qemu_client_bodies.h
GEN remote/remote_daemon_dispatch_stubs.h
GEN remote/lxc_daemon_dispatch_stubs.h
GEN remote/qemu_daemon_dispatch_stubs.h
GEN locking/qemu-lockd.conf
GEN vbox/virtvboxd.conf
GEN qemu/virtqemud.conf
GEN bhyve/virtbhyved.conf
GEN network/virtnetworkd.conf
GEN secret/virtsecretd.conf
GEN node_device/virtnodedevd.conf
GEN storage/virtstoraged.conf
GEN remote/libvirtd.conf
GEN remote/virtproxyd.conf
GEN libvirt_access.syms
GEN libvirt_access_qemu.syms
GEN libvirt_access_lxc.syms
GEN admin/libvirt_admin.syms
GEN libvirt_lxc.def
GEN libvirt_qemu.def
GEN libvirtd.qemu.logrotate
GEN libvirtd.lxc.logrotate
GEN libvirtd.libxl.logrotate
GEN libvirtd.logrotate
GEN logging/log_protocol.c
GEN locking/lock_protocol.c
GEN admin/admin_protocol.c
GEN rpc/virnetprotocol.c
GEN rpc/virkeepaliveprotocol.c
GEN lxc/lxc_monitor_protocol.c
GEN remote/remote_protocol.c
GEN remote/lxc_protocol.c
GEN remote/qemu_protocol.c
GEN admin/libvirt_admin.def
GEN libvirt.syms
GEN libvirt.def
/usr/local/bin/gmake all-am
gmake[3]: Entering directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
CC libvirt_driver_la-driver.lo
CC libvirt_driver_la-libvirt.lo
CC libvirt_driver_la-datatypes.lo
CC libvirt_driver_la-libvirt-domain.lo
CC libvirt_driver_la-libvirt-domain-checkpoint.lo
CC libvirt_driver_la-libvirt-domain-snapshot.lo
CC libvirt_driver_la-libvirt-host.lo
In file included from ../../src/libvirt.c:76:
In file included from ../../src/bhyve/bhyve_driver.h:24:
../../src/bhyve/bhyve_utils.h:29:10: fatal error: 'virclosecallbacks.h' file not found
#include "virclosecallbacks.h"
^~~~~~~~~~~~~~~~~~~~~
1 error generated.
gmake[3]: *** [Makefile:9189: libvirt_driver_la-libvirt.lo] Error 1
gmake[3]: *** Waiting for unfinished jobs....
gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
gmake[2]: *** [Makefile:6403: all] Error 2
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/bui...'>
gmake[1]: *** [Makefile:776: all-recursive] Error 1
gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-12/ws/build'>
gmake: *** [Makefile:669: all] Error 2
Build step 'Execute shell' marked build as failure
4 years, 6 months