[Libvirt-ci] Errored: libvirt/libvirt#2647 (master - 51d66b9)
by Travis CI
Build Update for libvirt/libvirt
-------------------------------------
Build: #2647
Status: Errored
Duration: 1 min and 15 secs
Commit: 51d66b9 (master)
Author: Laine Stump
Message: qemu: support unmanaged macvtap devices with <interface type='ethernet'>
Traditionally, macvtap devices are supported using <interface
type='direct'>, but that type requires specifying a source device name
and macvtap mode which can't be altered after the initial device
creation (and may not even be available to the management software
that's creating the XML config to feed to libvirt).
But the attributes in the <source> are essentially describing how the
device will be connected to the network, and if libvirt is to be
supplied with the name of a macvtap device that has already been
created, that device will also already be connected to the network
(and the connection can't be changed). Thus it seems more appropriate
to use type='ethernet', which was created explicitly for this purpose
- for devices that have already been (or will be) connected to the
external network by someone/something outside of libvirt. The fact
that it is a *macv*tap rather than a contentional tap device is just a
detail.
This patch supports using an existing macvtap device with <interface
type='ethernet'> by checking the supplied target dev name to see if it
is a macvtap device and, when this is the case, calling
virNetDevMacVLanTapOpen() instead of virNetDevTapCreate(). For
consistency, this is only done when target managed='no'.
Resolves: https://bugzilla.redhat.com/1723367 (partially)
Signed-off-by: Laine Stump <laine(a)redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange(a)redhat.com>
View the changeset: https://github.com/libvirt/libvirt/compare/4ef4ba497422...51d66b92e6c4
View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/582826518?utm_medium=notific...
--
You can unsubscribe from build emails from the libvirt/libvirt repository going to https://travis-ci.org/account/preferences/unsubscribe?repository=4872032&....
Or unsubscribe from *all* email updating your settings at https://travis-ci.org/account/preferences/unsubscribe?utm_medium=notifica....
Or configure specific recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications.
5 years
[Libvirt-ci] Still Failing: libvirt/libvirt#2645 (master - 926b7b6)
by Travis CI
Build Update for libvirt/libvirt
-------------------------------------
Build: #2645
Status: Still Failing
Duration: 24 mins and 58 secs
Commit: 926b7b6 (master)
Author: Daniel P. Berrangé
Message: docs: remove devhelp API docs
We currently generate two completely separate API references for the
libvirt public API. One at 'docs/html/' and one at 'docs/devhelp/'.
Both are published on the website, but we only link to content in
the 'docs/html/' pages.
Both are installed in the libvirt-docs sub-RPM, with a full copy
of the website including 'docs/html/' in /usr/share/docs/libvirt-docs,
while the 'docs/devhelp/' content goes to /usr/share/gtk-doc/. The
latter was broken for years until:
commit ca6f602546cb28658db05f29bc840e04d22d0947
Author: Andrea Bolognani <abologna(a)redhat.com>
Date: Fri May 10 14:54:52 2019 +0200
docs: Introduce $(devhelphtml_generated)
Our XSLT magic generates one Devhelp-compatible HTML file
per documentation module, but so far we have only shipped
and installed documentation for virterror.
Now that we have $(modules), however, we can generate the
list of files the same way we do for regular documentation
and make sure we always ship and install everything.
That this bug went unnoticed for so long is a sign of how few
people are using the devhelp docs. The only commits to the devhelp
code since it was first introduced have been fixing various build
problems that hit.
The only obvious difference between the two sets of docs is the CSS
styling in use. Overall devhelp does not look compelling enough to
justify having two duplicated sets of API docs. Eliminating it will
reduce the amount of XSL code we are carrying in the tree which is
an attractive benefit.
Reviewed-by: Pavel Hrdina <phrdina(a)redhat.com>
Reviewed-by: Andrea Bolognani <abologna(a)redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com>
View the changeset: https://github.com/libvirt/libvirt/compare/807a6dd31aa7...926b7b6e6c92
View the full build log and details: https://travis-ci.org/libvirt/libvirt/builds/582700767?utm_medium=notific...
--
You can unsubscribe from build emails from the libvirt/libvirt repository going to https://travis-ci.org/account/preferences/unsubscribe?repository=4872032&....
Or unsubscribe from *all* email updating your settings at https://travis-ci.org/account/preferences/unsubscribe?utm_medium=notifica....
Or configure specific recipients for build notifications in your .travis.yml file. See https://docs.travis-ci.com/user/notifications.
5 years
[Libvirt-ci] Build failed in Jenkins: libvirt-build » libvirt-freebsd-11 #812
by ci＠centos.org
See <https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/812/di...>
Changes:
[mprivozn] Add .editorconfig
[mprivozn] tests: fix xml2xml tpm-emulator.xml test
[mprivozn] dbus: correctly build reply message
[mprivozn] qemu: replace logCtxt with qemuDomainLogAppendMessage()
[mprivozn] qemu: add socket datagram capability
[mprivozn] qemu: add dbus-vmstate capability
[mprivozn] qemu: reset VM id after external devices stop
[mprivozn] qemu-security: add qemuSecurityCommandRun()
[mprivozn] qemu: add dbus-vmstate
[mprivozn] domain-conf: add network def private data
[mprivozn] qemu: add qemuDomainNetworkPrivate
[mprivozn] qemu-conf: add configurable slirp-helper location
[mprivozn] qemu-conf: add slirp state dir
[mprivozn] qemu: add slirp helper unit
[mprivozn] qemu-domain: save and restore slirp state
[mprivozn] qemu: add a flag to the cookie to prevent slirp-helper setup
[mprivozn] qemu-migration: prevent migration if dbus-vmstate is required
[mprivozn] qemu-migration: prevent migration if slirp cannot be migrated
[mprivozn] qemu-extdevice: prepare, start and stop slirp-helper
[mprivozn] qemu-command: use -net socket, fd= with slirp-helper
[mprivozn] qemu-process: prepare slirp-helper
[mprivozn] qemu-hotplug: handle hotplugging of slirp-helper
[mprivozn] tests: add slirp-helper qemuxml2argv test
------------------------------------------
[...truncated 141.04 KB...]
CC util/libvirt_util_la-virerror.lo
CC util/libvirt_util_la-virevent.lo
CC util/libvirt_util_la-vireventpoll.lo
CC util/libvirt_util_la-virfcp.lo
CC util/libvirt_util_la-virfdstream.lo
CC util/libvirt_util_la-virfile.lo
CC util/libvirt_util_la-virfirewall.lo
CC util/libvirt_util_la-virfirewalld.lo
CC util/libvirt_util_la-virfirmware.lo
CC util/libvirt_util_la-virgettext.lo
CC util/libvirt_util_la-virgic.lo
CC util/libvirt_util_la-virhash.lo
CC util/libvirt_util_la-virhashcode.lo
CC util/libvirt_util_la-virhook.lo
CC util/libvirt_util_la-virhostcpu.lo
CC util/libvirt_util_la-virhostdev.lo
CC util/libvirt_util_la-virhostmem.lo
CC util/libvirt_util_la-virhostuptime.lo
CC util/libvirt_util_la-viridentity.lo
CC util/libvirt_util_la-virinitctl.lo
CC util/libvirt_util_la-viriptables.lo
CC util/libvirt_util_la-viriscsi.lo
CC util/libvirt_util_la-virjson.lo
CC util/libvirt_util_la-virkeycode.lo
CC util/libvirt_util_la-virkeyfile.lo
CC util/libvirt_util_la-virlease.lo
CC util/libvirt_util_la-virlockspace.lo
CC util/libvirt_util_la-virlog.lo
CC util/libvirt_util_la-virmacaddr.lo
CC util/libvirt_util_la-virmacmap.lo
CC util/libvirt_util_la-virmodule.lo
CC util/libvirt_util_la-virnetdev.lo
CC util/libvirt_util_la-virnetdevbandwidth.lo
CC util/libvirt_util_la-virnetdevbridge.lo
CC util/libvirt_util_la-virnetdevip.lo
CC util/libvirt_util_la-virnetdevmacvlan.lo
CC util/libvirt_util_la-virnetdevmidonet.lo
CC util/libvirt_util_la-virnetdevopenvswitch.lo
CC util/libvirt_util_la-virnetdevtap.lo
CC util/libvirt_util_la-virnetdevveth.lo
CC util/libvirt_util_la-virnetdevvlan.lo
CC util/libvirt_util_la-virnetdevvportprofile.lo
CC util/libvirt_util_la-virnetlink.lo
CC util/libvirt_util_la-virnodesuspend.lo
CC util/libvirt_util_la-virkmod.lo
CC util/libvirt_util_la-virnuma.lo
CC util/libvirt_util_la-virobject.lo
CC util/libvirt_util_la-virpci.lo
CC util/libvirt_util_la-virpidfile.lo
CC util/libvirt_util_la-virpolkit.lo
CC util/libvirt_util_la-virportallocator.lo
CC util/libvirt_util_la-virprocess.lo
CC util/libvirt_util_la-virqemu.lo
CC util/libvirt_util_la-virrandom.lo
CC util/libvirt_util_la-virresctrl.lo
CC util/libvirt_util_la-virrotatingfile.lo
CC util/libvirt_util_la-virscsi.lo
CC util/libvirt_util_la-virscsihost.lo
CC util/libvirt_util_la-virscsivhost.lo
CC util/libvirt_util_la-virseclabel.lo
CC util/libvirt_util_la-virsecret.lo
CC util/libvirt_util_la-virsocketaddr.lo
CC util/libvirt_util_la-virstorageencryption.lo
CC util/libvirt_util_la-virstoragefile.lo
CC util/libvirt_util_la-virstoragefilebackend.lo
CC util/libvirt_util_la-virstring.lo
CC util/libvirt_util_la-virsysinfo.lo
CC util/libvirt_util_la-virsystemd.lo
CC util/libvirt_util_la-virthread.lo
CC util/libvirt_util_la-virthreadjob.lo
CC util/libvirt_util_la-virthreadpool.lo
CC util/libvirt_util_la-virtime.lo
CC util/libvirt_util_la-virtpm.lo
CC util/libvirt_util_la-virtypedparam.lo
CC util/libvirt_util_la-virusb.lo
CC util/libvirt_util_la-viruri.lo
CC util/libvirt_util_la-virutil.lo
CC util/libvirt_util_la-viruuid.lo
CC util/libvirt_util_la-virvhba.lo
CC util/libvirt_util_la-virvsock.lo
CC util/libvirt_util_la-virxml.lo
CC util/libvirt_util_la-virmdev.lo
CC util/libvirt_util_la-virfilecache.lo
CC conf/libvirt_conf_la-netdev_bandwidth_conf.lo
CC conf/libvirt_conf_la-netdev_vport_profile_conf.lo
CC conf/libvirt_conf_la-netdev_vlan_conf.lo
CC conf/libvirt_conf_la-virnetworkportdef.lo
CC conf/libvirt_conf_la-capabilities.lo
CC conf/libvirt_conf_la-checkpoint_conf.lo
CC conf/libvirt_conf_la-domain_addr.lo
CC conf/libvirt_conf_la-domain_capabilities.lo
CC conf/libvirt_conf_la-domain_conf.lo
CC conf/libvirt_conf_la-domain_audit.lo
CC conf/libvirt_conf_la-domain_nwfilter.lo
CC conf/libvirt_conf_la-virsavecookie.lo
CC conf/libvirt_conf_la-moment_conf.lo
CC conf/libvirt_conf_la-snapshot_conf.lo
CC conf/libvirt_conf_la-numa_conf.lo
CC conf/libvirt_conf_la-virdomaincheckpointobjlist.lo
CC conf/libvirt_conf_la-virdomainobjlist.lo
CC conf/libvirt_conf_la-virdomainmomentobjlist.lo
CC conf/libvirt_conf_la-virdomainsnapshotobjlist.lo
CC conf/libvirt_conf_la-object_event.lo
CC conf/libvirt_conf_la-domain_event.lo
CC conf/libvirt_conf_la-network_event.lo
CC conf/libvirt_conf_la-storage_event.lo
CC conf/libvirt_conf_la-node_device_event.lo
CC conf/libvirt_conf_la-secret_event.lo
CC conf/libvirt_conf_la-network_conf.lo
CC conf/libvirt_conf_la-virnetworkobj.lo
CC conf/libvirt_conf_la-networkcommon_conf.lo
CC conf/libvirt_conf_la-nwfilter_params.lo
CC conf/libvirt_conf_la-nwfilter_ipaddrmap.lo
CC conf/libvirt_conf_la-nwfilter_conf.lo
CC conf/libvirt_conf_la-virnwfilterobj.lo
CC conf/libvirt_conf_la-virnwfilterbindingdef.lo
CC conf/libvirt_conf_la-virnwfilterbindingobj.lo
CC conf/libvirt_conf_la-virnwfilterbindingobjlist.lo
CC conf/libvirt_conf_la-node_device_conf.lo
CC conf/libvirt_conf_la-node_device_util.lo
CC conf/libvirt_conf_la-virnodedeviceobj.lo
CC conf/libvirt_conf_la-storage_adapter_conf.lo
CC conf/libvirt_conf_la-storage_capabilities.lo
CC conf/libvirt_conf_la-storage_conf.lo
CC conf/libvirt_conf_la-virstorageobj.lo
CC conf/libvirt_conf_la-interface_conf.lo
CC conf/libvirt_conf_la-virinterfaceobj.lo
CC conf/libvirt_conf_la-secret_conf.lo
CC conf/libvirt_conf_la-virsecretobj.lo
CC conf/libvirt_conf_la-cpu_conf.lo
CC conf/libvirt_conf_la-virchrdev.lo
CC conf/libvirt_conf_la-device_conf.lo
CC cpu/libvirt_cpu_la-cpu.lo
CC cpu/libvirt_cpu_la-cpu_x86.lo
CC cpu/libvirt_cpu_la-cpu_s390.lo
CC cpu/libvirt_cpu_la-cpu_arm.lo
CC cpu/libvirt_cpu_la-cpu_ppc64.lo
CC cpu/libvirt_cpu_la-cpu_map.lo
CC security/libvirt_security_manager_la-security_driver.lo
CC security/libvirt_security_manager_la-security_nop.lo
CC security/libvirt_security_manager_la-security_stack.lo
CC security/libvirt_security_manager_la-security_dac.lo
CC security/libvirt_security_manager_la-security_manager.lo
CC security/libvirt_security_manager_la-security_util.lo
CC access/libvirt_driver_access_la-viraccessperm.lo
CC access/libvirt_driver_access_la-viraccessmanager.lo
CC access/libvirt_driver_access_la-viraccessdrivernop.lo
CC access/libvirt_driver_access_la-viraccessdriverstack.lo
CC access/libvirt_driver_access_la-viraccessapicheck.lo
CC access/libvirt_driver_access_la-viraccessapicheckqemu.lo
CC access/libvirt_driver_access_la-viraccessapichecklxc.lo
CC access/libvirt_driver_access_la-viraccessdriverpolkit.lo
CC rpc/libvirt_net_rpc_la-virnetmessage.lo
CC rpc/libvirt_net_rpc_la-virnettlscontext.lo
CC rpc/libvirt_net_rpc_la-virnetsocket.lo
CC rpc/libvirt_net_rpc_la-virkeepalive.lo
CC rpc/libvirt_net_rpc_la-virnetprotocol.lo
CC rpc/libvirt_net_rpc_la-virkeepaliveprotocol.lo
CC rpc/libvirt_net_rpc_la-virnetsshsession.lo
CC rpc/libvirt_net_rpc_la-virnetsaslcontext.lo
CC rpc/libvirt_net_rpc_la-virnetlibsshsession.lo
CC rpc/libvirt_net_rpc_server_la-virnetserverprogram.lo
CC rpc/libvirt_net_rpc_server_la-virnetserverservice.lo
CC rpc/libvirt_net_rpc_server_la-virnetserverclient.lo
CC rpc/libvirt_net_rpc_server_la-virnetdaemon.lo
CC rpc/libvirt_net_rpc_server_la-virnetserver.lo
CC rpc/libvirt_net_rpc_client_la-virnetclientprogram.lo
CC rpc/libvirt_net_rpc_client_la-virnetclientstream.lo
CC rpc/libvirt_net_rpc_client_la-virnetclient.lo
CC phyp/libvirt_driver_phyp_la-phyp_driver.lo
CC test/libvirt_driver_test_la-test_driver.lo
CC esx/libvirt_driver_esx_la-esx_driver.lo
CC esx/libvirt_driver_esx_la-esx_interface_driver.lo
CC esx/libvirt_driver_esx_la-esx_network_driver.lo
CC esx/libvirt_driver_esx_la-esx_storage_driver.lo
CC esx/libvirt_driver_esx_la-esx_storage_backend_vmfs.lo
CC esx/libvirt_driver_esx_la-esx_storage_backend_iscsi.lo
CC esx/libvirt_driver_esx_la-esx_stream.lo
CC esx/libvirt_driver_esx_la-esx_util.lo
CC esx/libvirt_driver_esx_la-esx_vi.lo
CC esx/libvirt_driver_esx_la-esx_vi_methods.lo
CC esx/libvirt_driver_esx_la-esx_vi_types.lo
CC vmx/libvirt_vmx_la-vmx.lo
CC vmware/libvirt_driver_vmware_la-vmware_driver.lo
CC vmware/libvirt_driver_vmware_la-vmware_conf.lo
CC secret/libvirt_secret_la-secret_util.lo
CC remote/libvirt_driver_remote_la-remote_driver.lo
CC remote/libvirt_driver_remote_la-remote_protocol.lo
CC remote/libvirt_driver_remote_la-lxc_protocol.lo
CC remote/libvirt_driver_remote_la-qemu_protocol.lo
CC logging/libvirt_driver_la-log_protocol.lo
CC logging/libvirt_driver_la-log_manager.lo
CC locking/libvirt_driver_la-lock_manager.lo
CC locking/libvirt_driver_la-lock_driver_nop.lo
CC locking/libvirt_driver_la-domain_lock.lo
CC admin/libvirt_driver_admin_la-admin_protocol.lo
CC admin/libvirt_driver_admin_la-admin_server.lo
CC admin/libvirt_driver_admin_la-admin_server_dispatch.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_glue.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_driver.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_snapshot_conf.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_V5_0.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_V5_1.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_V5_2.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_common.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_network.lo
CC vbox/libvirt_driver_vbox_impl_la-vbox_storage.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_agent.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_alias.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_block.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_blockjob.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_capabilities.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_command.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_dbus.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_domain.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_domain_address.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_cgroup.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_extdevice.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_firmware.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_hostdev.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_hotplug.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_conf.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_process.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_migration.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_migration_cookie.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_migration_params.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_monitor.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_monitor_text.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_monitor_json.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_driver.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_interface.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_security.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_qapi.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_slirp.lo
CC qemu/libvirt_driver_qemu_impl_la-qemu_tpm.lo
../../src/qemu/qemu_slirp.c:301:26: error: unused variable 'cmdstr' [-Werror,-Wunused-variable]
VIR_AUTOFREE(char *) cmdstr = NULL;
^
1 error generated.
gmake[3]: *** [Makefile:10983: qemu/libvirt_driver_qemu_impl_la-qemu_slirp.lo] Error 1
gmake[3]: *** Waiting for unfinished jobs....
rm util/virkeycode-linux.pod util/virkeycode-atset3.pod util/virkeycode-usb.pod util/virkeycode-xtkbd.pod util/virkeycode-win32.pod util/virkeyname-linux.pod util/virkeyname-win32.pod util/virkeycode-osx.pod util/virkeycode-qnum.pod util/virkeyname-osx.pod util/virkeycode-atset1.pod util/virkeycode-atset2.pod
gmake[3]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
gmake[2]: *** [Makefile:7500: all] Error 2
gmake[2]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/bui...'>
gmake[1]: *** [Makefile:2261: all-recursive] Error 1
gmake[1]: Leaving directory '/usr<https://ci.centos.org/job/libvirt-build/systems=libvirt-freebsd-11/ws/build'>
gmake: *** [Makefile:2154: all] Error 2
Build step 'Execute shell' marked build as failure
5 years