- Announce - libvirt List Archives

[Libvirt-announce] Entering freeze for libvirt-1.2.17
by Daniel Veillard 01 Jul '15

01 Jul '15

Following discussions on Friday, I applied the patches to deactivate the subset of Admin APIs and revert from 1.3.0 to 1.2.17. I then tagged in git and pushed signed tarballs and rpms to the usual place: ftp://libvirt.org/pub/libvirt/ I didn't run my usual tests on that one, my infra is in flux, so even more reasons for people to give it a try :-) I'm likely to make a candidate release 2 on Tuesday and if all goes well we can push 1.2.17 on Thursday, thanks, Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 2

[Libvirt-announce] ANNOUNCE: libvirt-glib version 0.2.1 released
by Daniel P. Berrange 16 Jun '15

16 Jun '15

I am pleased to announce that a new release of the libvirt-glib package, version 0.2.1, is now available from ftp://libvirt.org/libvirt/glib/ The packages are GPG signed with Key fingerprint: DAF3 A6FD B26B 6291 2D0E 8E3F BE86 EBB4 1510 4FDF (4096R) Changes in this release: - Fix libtoolize detection in autogen.sh - Allow storage volume format compatibility level to be set - Add pre-condition checks to more public API entry points - Don't try to return a value from void functions - Add API for controlling storage pool autostart flag - Add API for filesystem image format - Add loop, nbd and ploop filesystem types - Fix setting of driver type when called more than once libvirt-glib comprises three distinct libraries: - libvirt-glib - Integrate with the GLib event loop and error handling - libvirt-gconfig - Representation of libvirt XML documents as GObjects - libvirt-gobject - Mapping of libvirt APIs into the GObject type system NB: While libvirt aims to be API/ABI stable forever, with libvirt-glib we are not currently guaranteeing that libvirt-glib libraries are permanently API/ABI stable. That said we do not expect to break the API/ABI for the forseeable future and will always strive avoid it. Follow up comments about libvirt-glib should be directed to the regular libvir-list(a)redhat.com development list. Thanks to all the people involved in contributing to this release. Regards, Daniel -- |: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :| |: http://libvirt.org -o- http://virt-manager.org :| |: http://autobuild.org -o- http://search.cpan.org/~danberr/ :| |: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|

1 0

[Libvirt-announce] Release of libvirt-1.2.16
by Daniel Veillard 01 Jun '15

01 Jun '15

It's out ! Tagged in git, signed tarball and rpms are in place: ftp://libvirt.org/libvirt/ I also made a libvirt-python-1.2.16 release fund at: ftp://libvirt.org/libvirt/python/ This is a releatively small release, less than 150 commits, maybe the effect of the travels to OpenStack summit this month, also bigger pieces lining up for 1.3.0 planned for next month. There is still a few features, portability patches and tuning for ARM 64, and a fair amount of bug fixes, this should be a relatively safe release (famous last words :-) Features: - Introduce pci-serial (Michal Privoznik) - Introduce virDomainSetUserPassword API (Ján Tomko) - libvirt: Introduce protected key mgmt ops (Tony Krowiak) - add domain vmport feature (Marc-André Lureau) Documentation: - update github project name (Daniel P. Berrange) - formatstorage: Update <permissions> docs (Cole Robinson) - Document new RO repo mirrors (Michal Privoznik) - Document that virNodeGetInfo can return mhz == 0. (Richard W.M. Jones) - fix a small xml error in docs (Luyao Huang) - tests: Fix grammar in comments. (Andrea Bolognani) - add domain vmport feature (Marc-André Lureau) Portability: - qemu: Fix compilation error when enum variable size differs from 'int' (Peter Krempa) - bhyve: fix build with gcc48 (Roman Bogorodskiy) - Add missing XDR_FLAGS (Pavel Fedin) - node_device: fix libvirt build if WITH_HAL is defined (Maxim Nestratov) - util: Avoid shadow of 'ulong' in virMemoryMaxValue (Peter Krempa) - Fix build --without-network (Martin Kletzander) - maint: extend PIE support check (Roman Bogorodskiy) - bhyve: fix bhyvexml2argvtest build with gcc (Roman Bogorodskiy) Bug Fixes: - Allocate priv->vioserialaddrs unconditionally (Ján Tomko) - Properly free the xmlDocPtr when loading pool state (Ján Tomko) - storage: Fix problem with disk backend pool allocation calculation (John Ferlan) - storage: Don't adjust pool alloc/avail values for disk backend (John Ferlan) - virsh: Fix to list online cpus using virsh capabilities (Kothapally Madhu Pavan) - Fix the event name in vshEventTrayChangePrint (Ján Tomko) - Fix shrinking volumes with the delta flag (Ján Tomko) - interface: don't error out if a bond has no interfaces (Lubomir Rintel) - qemu: Limit rtc-reset-reinjection requirement to x86 only. (Andrea Bolognani) - storage_fs: Create directory with UID if needed (Martin Kletzander) - zfs: fix storagepoolxml2xml test (Roman Bogorodskiy) - qemu: Force capabilities cache refresh if libvirtd date is different (John Ferlan) - qemu: Resolve Coverity RESOURCE_LEAK (John Ferlan) - conf: Resolve Coverity NEGATIVE_RETURNS (John Ferlan) - storage: fs: Only force directory permissions if required (Cole Robinson) - parallels: fix possible crash in case of errors in prlsdkLoadDomain (Maxim Nestratov) - virsh: reject negative values for scaled integer (Pavel Hrdina) - network: Resolve Coverity FORWARD_NULL (John Ferlan) - conf: Resolve Coverity FORWARD_NULL (John Ferlan) - storage: Resolve Coverity FORWARD_NULL (John Ferlan) - netdev: fail when setting up an SRIOV VF if PF is offline (Laine Stump) - qemuDomainDetachChrDevice: Fix chardev hot-unplug (Michal Privoznik) - qemuDomainAttachChrDevice: Fix chardev hotplug (Michal Privoznik) - qemu: Log error if domain uses security driver which is not loaded (Erik Skultety) - conf: Restore the XML parser context in virDomainMemoryDefParseXML (Luyao Huang) - conf: Catch memory size overflow earlier (Peter Krempa) - virfile: virDirCreate: Fix ALLOW_EXIST conditional (Cole Robinson) - qemu: Fix numatune nodeset reporting (Martin Kletzander) - xenconfig: fix spice mousemode and copypaste (Jim Fehlig) - xenconfig: fix spicepasswd handling (Jim Fehlig) - node_device: update sriov/iommu info before dumpxml of a device (Laine Stump) - virsh: Fix dommemstat --period option type. (Andrea Bolognani) - qemu: fix exceptions in qemuAssignDeviceControllerAlias (Laine Stump) - qemu: Don't give up on first error in qemuMigrationCancelDriverMirror (Jiri Denemark) - reject out of range memory in SetMemory APIs (Ján Tomko) - qemu: Clear autofil fill flag when pinning iothread (John Ferlan) - virsh: Report an error when cpulist parsing fails (Luyao Huang) - Assign virtio-serial addresses after coldplugging a device (Ján Tomko) - qemu: vnc: error out for invalid port number (Pavel Hrdina) - conf: Remove source host name check for iSCSI (John Ferlan) - qemu: fix double free when RNG cold-plug fails (Luyao Huang) - libvirt-guests: Initialize SYNC_TIME (Michal Privoznik) - conf: Report error for unknown shmem ioeventfd value (Luyao Huang) - qemu: Fix balloon size handling with memory hot(un)plug (Peter Krempa) - conf: Fix up balloon size after removing a memory device from def (Peter Krempa) - caps: Fix regression defaulting to host arch (Cole Robinson) - processSerialChangedEvent: Close agent monitor early (Michal Privoznik) - qemuDomainShutdownFlags: check for domain activeness prior to guest presence (Michal Privoznik) - lxc: don't up the veth interfaces unless explicitly asked to (Lubomir Rintel) - qemu: Resolve Coverity FORWARD_NULL (John Ferlan) - qemu: Resolve Coverity FORWARD_NULL (John Ferlan) - qemu: Resolve Coverity FORWARD_NULL (John Ferlan) - xen: Resolve Coverity FORWARD_NULL (John Ferlan) - qemu: Resolve Coverity FORWARD_NULL (John Ferlan) - qemu: Resolve Coverity IDENTICAL_BRANCHES (John Ferlan) - vbox: Resolve Coverity RESOURCE_LEAK (John Ferlan) - libxl: Resolve Coverity RESOURCE_LEAK (John Ferlan) - conf: Add the cpu duplicate use check for vm numa settings (Luyao Huang) - qemu: Properly rename persistent def after migration (Jiri Denemark) - storage: fs: Don't try to chown directory unless user requested (Cole Robinson) - storage: fs: Don't attempt directory creation if it already exists (Cole Robinson) - storage: fs: Don't overwrite virDirCreate error (Cole Robinson) - virsh: Don't check migrate parameters (Jiri Denemark) - qemu: Forbid unsupported parameters for tunnelled migration (Jiri Denemark) - qemu: fix the vm deadlock when deleting a nonexistent iothread (Luyao Huang) - tools: fix the wrong check when use virsh setvcpus --maximum (Luyao Huang) Improvements: - libxl: support QXL video device (Jim Fehlig) - libxl: support SPICE graphics for HVM domains (Jim Fehlig) - libxl: change reservedVNCPorts to reservedGraphicsPorts (Jim Fehlig) - libxl: populate build_info vfb in separate function (Jim Fehlig) - debug: assure NULLSTR() around all %s args in debug at top of public APIs (Laine Stump) - node_device: more informative error log when device isn't found (Laine Stump) - Simplify allocation check in storageVolResize (Ján Tomko) - parallels: suppress console output from parallels SDK (Maxim Nestratov) - util: make it more robust to calculate timeout value (Zhang Bo) - util: improve the sysinfo element XML format (Luyao Huang) - conf: Avoid formatting empty redirfilter element (Luyao Huang) - maint: update to latest gnulib (Eric Blake) - qemu: Add libvirt version check to refresh capabilities algorithm (John Ferlan) - conf: storage: Don't emit empty <permissions> block (Cole Robinson) - storage: conf: Don't set any default <mode> in the XML (Cole Robinson) - parallels: move up updating parameter in prlsdkLoadDomain (Maxim Nestratov) - zfs: fix storagepoolxml2xml test (Roman Bogorodskiy) - util: better error message after failure to initialize firewall backend (Laine Stump) - interface: allow multiple IPv4 addresses + dhcp on a single interface (Laine Stump) - storage: conf: Don't output owner/group -1 (Cole Robinson) - sysinfo: Fix reports on ARM (Michal Privoznik) - qemu: Implement pci-serial (Michal Privoznik) - qemu: wire up virDomainSetUserPassword (Ján Tomko) - virsh: add set-user-password command (Ján Tomko) - threadpool: Switch to detached threads (Jiri Denemark) - Use virDomainDiskByName where appropriate (Jiri Denemark) - Add wrappers for virDomainDiskIndexBy* (Jiri Denemark) - virDomainNumatuneGetMode: Report if numatune was defined (Michal Privoznik) - Taint domains using cdrom-passthrough (John Ferlan) - virfile: virDirCreate: Drop redundant FORCE_PERMS flag (Cole Robinson) - xenconfig: format spice listenAddr when formating ports (Jim Fehlig) - xenconfig: use local variable for graphics def (Jim Fehlig) - node_device: replace duplicated code in hal and udev backends (Laine Stump) - node_device: new functions to get sriov/iommu info from sysfs (Laine Stump) - node device: prepare node_device_linux_sysfs.c to add more functions (Laine Stump) - nodedev: change if-else if in update_caps to switch (Laine Stump) - conf: make virNodeDevCapData an official type (Laine Stump) - virsh: Improve handling of send-process-signal --pid. (Andrea Bolognani) - virsh: Improve error message on integer value parsing failure. (Andrea Bolognani) - libvirt: tests: test protected key mgmt ops support (Tony Krowiak) - libvirt: qemu: enable/disable protected key management ops (Tony Krowiak) - libxl: provide impl for nodeGetSecurityModel (Jim Fehlig) - qemu: log error when domain has an unsupported IDE controller (Laine Stump) - qemu: clean up qemuBuildCommandline loop that builds controller args (Laine Stump) - qemu: remove test for allowing ide controller in s390, rename usb tests (Laine Stump) - qemu: use controller alias when constructing device/controller args (Laine Stump) - conf: utility to return alias of a controller based on type/index (Laine Stump) - qemu: Keep track of what disks are being migrated (Jiri Denemark) - Move QEMU-only fields from virDomainDiskDef into privateData (Jiri Denemark) - Rename virDomainHasBlockjob as qemuDomainHasBlockjob (Jiri Denemark) - Add privateData to virDomainDiskDef (Jiri Denemark) - Some alignment fixes in lxc_controller and jsontest (Martin Kletzander) - gendispatch: Don't generate long lines (Martin Kletzander) - virnetserver: Remove unnecessary double space (Martin Kletzander) - rpc: Don't mix max_clients and max_workers in PostExecRestart (Martin Kletzander) - conf: Expose iothreadids when delete non sequential iothreadids (John Ferlan) - parallels: remove connection wide wait timeout (Nikolay Shirokovskiy) - qemuMigrationPrepareAny: Drop useless variable @now (zhang bo) - maint: Ignore Vim swap files (Andrea Bolognani) - virSysinfoParseProcessor: Drop useless check for NULL (Michal Privoznik) - libxl: support VNC passwd (Jim Fehlig) - conf: Adjust duplicate source host port check (John Ferlan) - daemon: Suppress logging of VIR_ERR_NO_DOMAIN_METADATA (Peter Krempa) - conf_capabilities: fix wrong indentation (Pavel Hrdina) - XML: escape strings where we should do it (Pavel Hrdina) - qemu: eliminate duplicated code in qemuBuildDriveDevStr() (Laine Stump) - qemu: use qemuDomainMachineIsI440FX() in appropriate place (Laine Stump) - Ignore bridge template names with multiple printf conversions (Ján Tomko) - conf: Always truncate balloon size to maximum memory size (Peter Krempa) - qemu: Convert qemuConnectGetAllDomainStats to use new helpers (Peter Krempa) - conf: Add helper to convert list of virDomains to a list of virDomainObjs (Peter Krempa) - conf: Refactor domain list collection critical section (Peter Krempa) - conf: Rename virDomainObjListFilter type to virDomainObjListACLFilter (Peter Krempa) - conf: Extract code to filter domain list into a separate function (Peter Krempa) - util: Make the virDomainListFree helper more universal (Peter Krempa) - tests: Remove redundant aarch64 tests (Cole Robinson) - qemu: multiqueue for ccw devices (Boris Fiuczynski) - libxl: support soundhw for hvm domains (Jim Fehlig) - libxl: add logrotate config file (Jim Fehlig) - qemu: Implement GIC (Michal Privoznik) - Introduce GIC feature (Michal Privoznik) - polkit: Allow password-less access for 'libvirt' group (Cole Robinson) - storage: fs: Fill in permissions on pool refresh (Cole Robinson) - tests: add machine vmport qemu test (Marc-André Lureau) - qemu: add machine vmport argument (Marc-André Lureau) - qemu: add virQEMUCapsSupportsVmport (Marc-André Lureau) - qemu: move qemuDomainMachineIs{I440FX,Q35} (Marc-André Lureau) - qemu: add QEMU_CAPS_MACHINE_VMPORT_OPT (Marc-André Lureau) - domain/conf: add VIR_DOMAIN_FEATURE_VMPORT (Marc-André Lureau) - virsh: introduce new macros to help check flag requirements (Pavel Hrdina) - qemu: use new macros for setvcpus to check flags and cleanup the code (Pavel Hrdina) - use new macro helpers to check flag requirements (Pavel Hrdina) - use new macro helpers to check exclusive flags (Pavel Hrdina) - internal: introduce macro helpers to check flag requirements (Pavel Hrdina) - internal: introduce macro helpers to reject exclusive flags (Pavel Hrdina) So thanks everybody for your help pulling out this last release of the 1.2 cycle, be it with patches, ideas, reports, reviews ... Enjoy ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[Libvirt-announce] Entering freeze for libvirt 1.2.16
by Daniel Veillard 29 May '15

29 May '15

I'm one day late but I have tagged the release candidate 1 in git and pushed signed tarballs and rpms to the usual place: ftp://libvirt.org/libvirt/ we have a bit less than 160 commits so far since 1.2.15. I tried it with my usual limited testing and it looks fine, https://ci.centos.org/ seems fine when it comes to libvirt, but please give it a try so we can get potential bugs or portability issues out. I will probably make an rc2 on Friday and push the final release next Monday or Tuesday, thanks ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 1

[Libvirt-announce] Release of libvirt-1.2.15
by Daniel Veillard 04 May '15

04 May '15

It's out ! Libvirt 1.2.15 is released, I tagged it in git and provided signed tarballs and rpms available at the usual place: ftp://libvirt.org/libvirt/ I also pushed a python bindings release too at: ftp://libvirt.org/libvirt/python/ This is again a reasonably large release with around 375 patches merged in, including a fairly large set of bug fixes across all areas. A few user visible features and a large set of improvements are there too: Features: - Implement virDomainAddIOThread and virDomainDelIOThread (John Ferlan) - libxl: Introduce configuration file for libxl driver (Jim Fehlig) - Add VIR_DOMAIN_EVENT_ID_DEVICE_ADDED event (Ján Tomko) - various improvements to parallels driver (Maxim Nestratov, Dmitry Guryanov) Documentation: - qemu: Fix comment for timeDelta (Jiri Denemark) - Fix typo in comment about memory binding (zhang bo) - virhostdev: Fix comments for virHostdevReAttachPCIDevices (John Ferlan) - Add articles to virDomainDeviceDetachFlags docs (Ján Tomko) - lib: snapshot: Explain that only one layer of images is inserted (Peter Krempa) - Visually separate snapshot disk subelements (Ján Tomko) - Add info (where necessary) that paths should be specified as absolute (Erik Skultety) - Typos: Get rid of dependan(t|cies) (Martin Kletzander) - Add Host sFlow into monitoring apps (Martin Kletzander) Portability: - Fix building virnetserverclientmock with MinGW (Martin Kletzander) - Cleanup parameters for mock libraries (Martin Kletzander) - Cleanup srcdir usage (Michal Privoznik) - Add missing linker flags for MinGW build (Pavel Fedin) - build: add pragma directive to fix build on some gcc (Pavel Hrdina) - build: avoid obsolete index() (Eric Blake) - util: fix build on non-Linux (Roman Bogorodskiy) - vircapstest: fix build without LXC, QEMU or XEN (Roman Bogorodskiy) - virbuffer: fix build on rhel-6 (Pavel Hrdina) - tests: fix build on old 32-bit platforms (Eric Blake) - build: provide virNetDevSysfsFile on non-Linux (Eric Blake) - build: include correct header for time() (Eric Blake) - xen: fix build error on rhel-5 (Pavel Hrdina) - qemu: Avoid shadow of 'sync' symbol (Peter Krempa) Bug Fixes: - qemu: Fix bus and lun checks when scsi-disk.channel not present (John Ferlan) - rpm-build: update %files section for libxl (Pavel Hrdina) - qemu: blockjob: Call qemuDomainSupportsBlockJobs only on online VMs (Peter Krempa) - qemu: Check address type for USB disks (Jiri Denemark) - cpu: Honor vendor_id override in host-model (Jiri Denemark) - iscsi: do not fail to stop a stopped pool (Ján Tomko) - qemu: conf: Reject memory device if it would exceed configured max size (Peter Krempa) - qemu: blockCopy: Allow reuse of raw image for shallow block copy (Peter Krempa) - tests: free ChardevInfo correctly in qemumonitorjsontest (Zhang Bo) - storage: fs: Ignore volumes that fail to open with EACCESS/EPERM (Cole Robinson) - storage: If driver startup state syncing fails, delete statefile (Cole Robinson) - storage: Don't leave stale state file if pool startup fails (Cole Robinson) - storage: Fix autostart dir for qemu:///session (Cole Robinson) - qemu: qemuProcessDetectIOThreadPIDs invert checks (John Ferlan) - conf: Resolve some Coverity errors (John Ferlan) - network: check newDef for used bridge names in addition to def (Laine Stump) - network: check for bridge name conflict with existing devices (Laine Stump) - network: move auto-assign of bridge name from XML parser to net driver (Laine Stump) - test: Fix actual vs. expected in virtTestCompareFiles (Laine Stump) - qemu: Resolve Coverity DEADCODE (John Ferlan) - util: fix memleak in virStorageSourceClear (zhang bo) - storage: Resolve Coverity UNINIT (John Ferlan) - Fix check for return value of qemuDomainAgentAvailable() (Martin Kletzander) - conf: fix memleak in virDomainHostdevDefClear (Zhang Bo) - conf: fix memleak in virDomainNetIpParseXML (Zhang Bo) - qemu: fix memleak in virCapabilitiesDomainDataLookup (Zhang Bo) - qemu: fix memleaks in qemuBuildCommandLine (Zhang Bo) - util: fix memleak in virFindSCSIHostByPCI (Zhang Bo) - tests: fix some memleaks in tests (Zhang Bo) - qemu: Fix domain object leak in qemuDomainInterfaceAddresses (Peter Krempa) - libxl: initialize sdl.opengl defbool in libxlMakeVfb (Jim Fehlig) - libxl: initialize vfb defbools in libxlMakeVfb (Olaf Hering) - parallels: fix crash in prlsdkAddNet in case of CT definition (Maxim Nestratov) - bhyve: fix build in tests (Roman Bogorodskiy) - Fix memory leak in virNetSocketNewConnectUNIX (Jiri Denemark) - parallels: fix IS_CT macro (Maxim Nestratov) - rng: fix port number range validation (Daniel P. Berrange) - qemu: Don't fail to reboot domains with unresponsive agent (zhang bo) - bhyve: fix build in tests (Roman Bogorodskiy) - spec: Fix libxl build with driver modules (Cole Robinson) - configure: Fix --loader-nvram typo (Cole Robinson) - parallels: don't forget to unlock domain after successful virDomainObjListFindByUUID call (Maxim Nestratov) - vircommand: fix polling in virCommandProcessIO (Roman Bogorodskiy) - util: storage: Fix possible crash when source path is NULL (Peter Krempa) - qemu: Fix issues with maxMemory in qemuDomainSetMemoryFlags() (Luyao Huang) - qemu: set macvtap physdevs online when macvtap is set online (Laine Stump) - util: set MAC address for VF via netlink message to PF+VF# when possible (Laine Stump) - qemu: Always refresh capabilities if no <guests> found (Cole Robinson) - scsi: Adjust return values from processLU (John Ferlan) - storage: Fix check for stable path check (John Ferlan) - domtop: Properly free cpu status (Michal Privoznik) - parallels: fix return status for parallelsConnectOpen (Nikolay Shirokovskiy) - lxc: fix starting a domain with non-strict numa memory mode (Luyao Huang) - lxc: fix starting a domain with a cpuset but no numatune (Luyao Huang) - rng: Forbid to validate mismatched <disk> 'device' and 'type' attributes (Erik Skultety) - domcaps: Check for architecture more wisely (Michal Privoznik) - virNetSocketNewConnectUNIX: Don't unlink(NULL) (Michal Privoznik) - libxl: drop virDomainObj lock when destroying a domain (Jim Fehlig) - libxl: acquire a job when destroying a domain (Jim Fehlig) - virCondWaitUntil: calculate timespec correctly (Michael Chapman) - qemu: bulk stats: Ignore errors from missing/inaccessible disks (Peter Krempa) - Strip control codes in virBufferEscapeString (Ján Tomko) - Ignore storage volumes with control codes in their names (Ján Tomko) - Strip control characters from sysfs attributes (Ján Tomko) - tests: Resolve Coverity RESOURCE_LEAK (John Ferlan) - virsh: fix regression in 'virsh event' by domain (Eric Blake) - qemu: monitor: Fix qemuMonitorGetAllBlockStatsInfo with HMP (Peter Krempa) - qemu: monitor: Ensure that qemuMonitorSetLink is called with non-null name (Peter Krempa) - virNetSocketNewConnectUNIX: Use flocks when spawning a daemon (Michal Privoznik) - sanlock: Use VIR_ERR_RESOURCE_BUSY if sanlock_acquire fails (Jiri Denemark) - hostdev: fix loop index error when resetvfnetconfig (Huanle Han) - qemu: fix index error when clean up vport profile (Huanle Han) - virt-aa-helper: add unix channels (esp for qemu-guest-agent) (Serge Hallyn) - qemu: save domain status after set memory parameters (Shanzhi Yu) - virsh: improve the error for wrong memtune parameters (Shanzhi Yu) - qemu: drivePivot: Fix assumption when 'block-job-complete' fails (Peter Krempa) - qemu: Fix condition for checking vcpu when pinning vcpus (Peter Krempa) - qemu: Enforce WWN to be unique among VM's disks (Peter Krempa) - virBitmap: Place virBitmapIsAllClear check after virBitmapParse calls (Erik Skultety) - Fix usb device version parsing issues (Ján Tomko) - Support IPv6 in networkGetNetworkAddress (Ján Tomko) - util: Update virNetDevGetIPAddress to get IPv6 addresses (Luyao Huang) - parallels: fix virDomainDefineXML for domain in saved state (Dmitry Guryanov) - conf: fix virDomainDefFormatInternal for parallels (Dmitry Guryanov) - conf: fix virDomainDefParseXML for parallels (Dmitry Guryanov) - storage: Don't duplicate efforts of backend driver (John Ferlan) - storage: Need to update freeExtent at delete primary partition (John Ferlan) - storage: Fix issues in storageVolResize (John Ferlan) - Open /proc/PID/ns/* read-only to avoid getting permission denied (Cédric Bosdonnat) - lxc: create the required directories upon driver start (Lubomir Rintel) - util: file: Don't carelessly sanitize URIs (Peter Krempa) - fix memleak in qemuRestoreCgroupState (Luyao Huang) - qemuProcessHook: Call virNuma*() only when needed (Michal Privoznik) - parallels: delete old networks in prlsdkDoApplyConfig before adding new ones (Maxim Nestratov) - util: fix removal of callbacks in virCloseCallbacksRun (Michael Chapman) - qemu: fix race between disk mirror fail and cancel (Michael Chapman) - qemu: fix error propagation in qemuMigrationBegin (Michael Chapman) - qemu: fix crash in qemuProcessAutoDestroy (Michael Chapman) - virQEMUDriverGetConfig: Fix memleak (Michal Privoznik) - virDomainVirtioSerialAddrSetFree: Fix memleak (Michal Privoznik) - qemuSetupCgroupForVcpu: Fix memleak (Michal Privoznik) - libvirt: virsh: Kill all uses of __FUNCTION__ in error messages (Noella Ashu) - virsh: Fix domifaddr output in quiet mode (Luyao Huang) - libxl: fix dom0 balloon logic (Jim Fehlig) - hostdev: Fix index error in loop after remove an element (Huanle Han) - Fix xlconfigtest with older libxl (Ján Tomko) - iscsi: Fix exit path for virStorageBackendISCSIFindLUs failure (John Ferlan) - qemuDomainBlockCopy: Check @granularity to be a power of two (Luyao Huang) - nodeinfodata: Remove broken symlinks and uneeded files (Michal Privoznik) - qemu: lifecycle: make agent-mode shutdown and reboot timeout (zhang bo) Improvements: - main: add new generated files to .gitignore (Pavel Hrdina) - libxl: provide integration with lock manager (Jim Fehlig) - domain: conf: Drop unused OSTYPE_AIX (Cole Robinson) - qemu: migration: use sync block job helpers (Michael Chapman) - qemuDomainBlockJobAbort: use sync block job helpers (Michael Chapman) - qemuProcessStop: wake up pending sync block jobs (Michael Chapman) - qemuBlockJobSync*: introduce sync block job helpers (Michael Chapman) - qemuBlockJobEventProcess: move to new source file (Michael Chapman) - qemu: Validate available slot count for memory devices (Peter Krempa) - qemu: command: Validate that memory devices slot ID is in range (Peter Krempa) - parallels: implement domainDetachDevice and domainDetachDeviceFlags (Maxim Nestratov) - parallels: add prlsdkDelDisk and prlsdkGetDiskIndex functions (Maxim Nestratov) - qemu: make qemuMonitorChardevInfoFree non-static (Zhang Bo) - storage: Break out storageDriverLoadPoolState (Cole Robinson) - qemu: Remove need for qemuMonitorIOThreadInfoFree (John Ferlan) - qemu: Remove need for qemuDomainParseIOThreadAlias (John Ferlan) - conf: explicitly initialize 'cpumask' variable (Roman Bogorodskiy) - virsh: Add iothreadadd and iothreaddel commands (John Ferlan) - qemu: Add support to Add/Delete IOThreads (John Ferlan) - domain: Introduce virDomainIOThreadSchedDelId (John Ferlan) - remote: Add support for AddIOThread and DelIOThread (John Ferlan) - conf: Adjust the iothreadsched expectations (John Ferlan) - Move iothreadspin information into iothreadids (John Ferlan) - conf: Move virDomainPinIsDuplicate and make static (John Ferlan) - qemu: Use domain iothreadids to IOThread's 'thread_id' (John Ferlan) - conf: Add new domain XML element 'iothreadids' (John Ferlan) - openvz: Drop useless domain lookup (Michal Privoznik) - qemu: Connect to guest agent after channel hotplug (Peter Krempa) - qemu: agent: Differentiate errors when the agent channel was hotplugged (Peter Krempa) - qemu: Reuse qemuDomainAgentAvailable in qemuDomainInterfaceAddresses (Peter Krempa) - qemu: agent: Reuse virJSONValueObjectCreateVArgs in qemuAgentMakeCommand (Peter Krempa) - libxl: remove duplicate check for pci subsystem type (Olaf Hering) - libxl: use pci init and dispose functions (Olaf Hering) - hostdev: fix net config restore error (Huanle Han) - hostdev: Create virHostdevIsPCINetDevice (Huanle Han) - qemu: Build nvram directory at driver startup (Cole Robinson) - qemu: Build channel autosocket directory at driver startup (Cole Robinson) - qemu: chown autoDumpPath on driver startup (Cole Robinson) - qemu: conf: Clarify paths that are relative to libDir (Cole Robinson) - tests: qemu: Couple aarch64 CPU tests (Cole Robinson) - migration: Usable time statistics without requiring NTP (Jiri Denemark) - uml: s/virDomainObjListFindByID/virDomainObjListFindByUUID/ (Michal Privoznik) - virDomainObjList: Introduce yet another hash table (Michal Privoznik) - virDomainObjListFindByName: Return referenced object (Michal Privoznik) - Introduce virDomainObjEndAPI (Michal Privoznik) - virDomainObjListNew: Use virObjectFreeHashData (Michal Privoznik) - virDomainObjListAddLocked: s/false/NULL/ for @oldDef (Michal Privoznik) - parallels: implement .domainGetMaxMemory (Dmitry Guryanov) - Apparmor: allow reading block-rbd.so (Cédric Bosdonnat) - Allow access to vendor and device file for PCI device passthrough (Cédric Bosdonnat) - qemu: cgroup: Fix priorities when setting emulatorpin (Peter Krempa) - tests: Add VIR_TEST_REGENERATE_OUTPUT (Cole Robinson) - tests: Add virtTestCompareToFile (Cole Robinson) - tests: Use *DefParseFile more (Cole Robinson) - tests: Add VIR_TEST_DEBUG and VIR_TEST_VERBOSE (Cole Robinson) - parallels_sdk: Utilize parallelsDomObjFromDomain() (Michal Privoznik) - parallels_driver: Utilize parallelsDomObjFromDomain() (Michal Privoznik) - parallels: Introduce parallelsDomObjFromDomain() (Michal Privoznik) - struct _parallelsConn: Mark @domains as immutable pointer (Michal Privoznik) - spec: Point fedora --with-loader-nvram at nightly firmware repo (Cole Robinson) - configure: Report --with-loader-nvram value in summary (Cole Robinson) - locking: relax PID requirement (Jim Fehlig) - util: storage: Improve error message when requesting image above 'start' (Peter Krempa) - util: storage: Add hint to error message that indexed access was used (Peter Krempa) - util: command: Deduplicate code in virCommandNewArgList (Peter Krempa) - qemu: migration: Refactor hostdev validation in migration check (Peter Krempa) - processNicRxFilterChangedEvent: Take appropriate actions for NET_TYPE_NETWORK too (Michal Privoznik) - virDomainActualNetDefContentsFormat: Format class_id only for status XML (Michal Privoznik) - scsi: Change return values for virStorageBackendSCSIFindLUs (John Ferlan) - scsi: Adjust return value for virStorageBackendSCSINewLun (John Ferlan) - storage: Split out the stable path check (John Ferlan) - xend: Remove a couple of unused function prototypes. (Richard W.M. Jones) - domain: conf: Drop expectedVirtTypes (Cole Robinson) - caps: Use DomainDataLookup to replace GuestDefault* (Cole Robinson) - domain: conf: Use CapabilitiesDomainDataLookup for caps validation (Cole Robinson) - domain: conf: Do ostype/arch/machine parsing earlier (Cole Robinson) - caps: Add virCapabilitiesDomainDataLookup (Cole Robinson) - caps: Convert to use VIR_DOMAIN_VIRT internally (Cole Robinson) - domain: Convert os.type to VIR_DOMAIN_OSTYPE enum (Cole Robinson) - caps: Switch AddGuest to take VIR_DOMAIN_OSTYPE value (Cole Robinson) - caps: Use an enum internally for ostype value (Cole Robinson) - domain: conf: Don't validate VM ostype/arch at daemon startup (Cole Robinson) - domain: conf: Better errors on bad os <type> values (Cole Robinson) - parallels: make device addressing consistent (Nikolay Shirokovskiy) - rng: Move sgio attr definition to a separate block (Erik Skultety) - Apparmor: removed duplicate nscd rules (Cédric Bosdonnat) - schema: Allow multiple machines for VMs and unite architectures (Martin Kletzander) - qemuDomainShutdownFlags: Set fakeReboot more frequently (zhang bo) - Introduce virNetDevBandwidthUpdateFilter (Michal Privoznik) - virnetdevbandwidth.c: Separate tc filter creation to a function (Michal Privoznik) - virNetDevBandwidthSet: Add priority to filter (Michal Privoznik) - virDomainActualNetDefContentsFormat: Format class_id more frequently (Michal Privoznik) - nwfilter: Partly initialize driver even for non-privileged users (Michal Privoznik) - lxc: move wireless PHYs to a network namespace (Lubomir Rintel) - libxl: Move job acquisition in libxlDomainStart to callers (Jim Fehlig) - libxl: support HVM direct kernel boot (Jim Fehlig) - xenconfig: don't use "kernel" for hvmloader (Jim Fehlig) - xenconfig: move <os> parsing/formating to config-specific files (Jim Fehlig) - xenconfig: remove redunant parsing of device_model (Jim Fehlig) - xenconfig: export xenConfigCopyString (Jim Fehlig) - storage: Refactor virStorageBackendSCSINewLun (John Ferlan) - qemu: monitor: Refactor and fix monitor checking (Peter Krempa) - daemon: Prefix sysctl configuration filename with a number (Jiri Denemark) - RNG schema: allow plain @floor to <bandwidth/> (Michal Privoznik) - virNetDevBandwidthPlug: Update function description (Michal Privoznik) - Add functions dealing with control characters in strings (Ján Tomko) - tests: rename testStripIPv6BracketsData to testStripData (Ján Tomko) - Add an example for EVENT_ID_DEVICE_ADDED (Ján Tomko) - Emit VIR_DOMAIN_EVENT_ID_DEVICE_ADDED in the QEMU driver (Ján Tomko) - Cleanup "/sys/class/net" usage (Michal Privoznik) - tests: Add virnetdevtestdata to EXTRA_DIST (Michal Privoznik) - node: udev: Remove some redundant error reports (Peter Krempa) - virPidFileConstructPath: Drop useless VIR_FREE() (Michal Privoznik) - qemu: monitor: @running in qemuMonitorGetStatus is always non-NULL (Peter Krempa) - qemu: monitor: Don't use 'ret' variable where not necessary (Peter Krempa) - qemu: monitor: Sanitize control flow in qemuMonitorSetCapabilities (Peter Krempa) - qemu: monitor: Clean up coding style (Peter Krempa) - json: export non-static functions (Martin Kletzander) - Change virConnectPtr into virObjectLocklable (Martin Kletzander) - closeCallback is already lockable, initialize it as such (Martin Kletzander) - configure: Align messages (Martin Kletzander) - storage: Add duplicate devices check for zfs pool def (John Ferlan) - storage: Add duplicate source pool for Gluster pool def (John Ferlan) - storage: Add duplicate host check for Sheepdog pool def (John Ferlan) - storage: Remove default from switch in virStoragePoolSourceFindDuplicate (John Ferlan) - storage: Use virStoragePoolSourceMatchSingleHost for NETFS (John Ferlan) - storage: Add check for different ports for host duplicate matching (John Ferlan) - storage: Create virStoragePoolSourceMatchSingleHost (John Ferlan) - storage: Refactor iSCSI Source matching (John Ferlan) - Introduce virnetdevtest (Michal Privoznik) - cfg: Disallow usage of 'index' as variable name (John Ferlan) - nwfilter: Change 'index' to 'idx' (John Ferlan) - snapshot: Change 'index' to 'idx' (John Ferlan) - util: Use 'idx' instead of 'index' (John Ferlan) - qemu: Adjust the prototype to match the function (John Ferlan) - sparc: Add default PCI root controller (Martin Kletzander) - qemu: Use 'idx' instead of 'index' for variable name (John Ferlan) - qemu: Refactor qemuDomainBlockJobAbort() (Peter Krempa) - qemu: blockPull: Refactor the rest of qemuDomainBlockJobImpl (Peter Krempa) - qemu: blockjob: Separate qemuDomainBlockJobAbort from qemuDomainBlockJobImpl (Peter Krempa) - qemu: blockjob: Split qemuDomainBlockJobSetSpeed from qemuDomainBlockJobImpl (Peter Krempa) - qemu: monitor: Extract handling of JSON block job error codes (Peter Krempa) - qemu: monitor: json: Refactor error code class checker (Peter Krempa) - conf: Refactor virDomainVcpuPinDefParseXML (Peter Krempa) - conf: Error out if iothread id is missing in iothreadpin (Peter Krempa) - onf: Split up virDomainVcpuPinDefParseXML (Peter Krempa) - conf: Split out parsing of emulatorpin (Peter Krempa) - conf: ABI: Check WWN in disk abi stability check (Peter Krempa) - Convert virDomainPinIsDuplicate into bool return (John Ferlan) - Rename qemuCheckIothreads to qemuCheckIOThreads (John Ferlan) - Rewrite vshParseCPUList (Ján Tomko) - Rewrite vshPrintPinInfo (Ján Tomko) - Parallels: implemented domainAttachDevice (Alexander Burluka) - Parallels: implement domainAttachDeviceFlags (Alexander Burluka) - Parallels: remove disk serial number check (Alexander Burluka) - Remove overengineered loop (Ján Tomko) - Introduce struct _virStorageBackendQemuImgInfo (Ján Tomko) - Rename virStorageBackendCreateQemuImgCmd (Ján Tomko) - Use XPath when parsing snapshot disk definition (Ján Tomko) - Split out storage format 'compat' attribute sanity check (Ján Tomko) - Remove feature formating funcs from pool-specific options (Ján Tomko) - Rewrite usb device version parsing (Ján Tomko) - Do xml->xml test for usb-redir-filter (Ján Tomko) - Do not require virtio-pci devices when using virtio-mmio (Ján Tomko) - qemuMigrationPrecreateStorage: Fix debug message (Michal Privoznik) - qemu_migration.c: sleep first before checking for migration status. (Xing Lin) - conf: Don't output <cpu> tag if it contains no information. (Andrea Bolognani) - qemu: qemuDomainHotplugVcpus - separate out pin adjustment code (John Ferlan) - AUTHORS: Add my email address to AUTHORS.in (Dmitry Guryanov) - util: Replace virNetDevGetIPv4Address with virNetDevGetIPAddress (John Ferlan) - parallels: add implicit input devices (Dmitry Guryanov) - conf: add input device type for parallels containers (Dmitry Guryanov) - conf: return proper default video type for parallels (Dmitry Guryanov) - conf: add VIR_DOMAIN_VIDEO_TYPE_PARALLELS video type (Dmitry Guryanov) - parallels: don't fill net adapter model for containers (Dmitry Guryanov) - parallels: fill adapter model in virDomainNetDef (Dmitry Guryanov) - parallels: add controllers in prlsdkLoadDomain (Dmitry Guryanov) - parallels: report, that cdroms are readonly (Dmitry Guryanov) - parallels: implement virDomainManagedSave (Dmitry Guryanov) - parallels: split prlsdkDomainChangeState function (Dmitry Guryanov) - parallels: fix headers in parallels_sdk.h (Dmitry Guryanov) - qemu: qemuDomainHotplugVcpus - separate out the del cgroup and pin (John Ferlan) - qemu: qemuDomainHotplugVcpus - separate out the add cgroup (John Ferlan) - cgroup: Use virCgroupNewThread (John Ferlan) - cgroup: Introduce virCgroupNewThread (John Ferlan) - qemu: blockPivot: Don't pause the VM any more since we don't use drive-reopen (Peter Krempa) - qemu: Clean up old leftovers in qemuMonitorDrivePivot (Peter Krempa) - qemu: blockjob: Use the new helpers in qemuDomainGetBlockJobInfo (Peter Krempa) - qemu: domain: Add helper to check block job support (Peter Krempa) - qemu: domain: Introduce helper to retrieve domain monitor object (Peter Krempa) - Apparmor qemu abstraction fixes for SLES (Cédric Bosdonnat) - test: Add tests for virFileSanitizePath (Peter Krempa) - virLXCControllerSetupResourceLimits: Call virNuma*() iff needed (Michal Privoznik) - vbox: Implement virDomainSendKey (Dawid Zamirski) - vbox: Register IKeyboard with the unified API. (Dawid Zamirski) - vircgroup: Introduce virCgroupControllerAvailable (Michal Privoznik) - qemu_driver: check caps after starting block job (Michael Chapman) - qemu_migrate: use nested job when adding NBD to cookie (Michael Chapman) - storage: Introduce storagePoolUpdateAllState function (Erik Skultety) - conf: Introduce virStoragePoolLoadAllState && virStoragePoolLoadState (Erik Skultety) - storage: Add support for storage pool state XML (Erik Skultety) - hostdev: Report the domain name for used hostdevs during nodedev-detach (Shivaprasad G Bhat) - virsh: Improve change-media success message (Cole Robinson) - interface: allow multiple IPv4 addresses in interface XML (Laine Stump) - virsh.pod: Remove redundant --config from attach-interface (Jiri Denemark) - esx: esxNodeGetFreeMemory return info from host. (Dawid Zamirski) - esx: add esxVI_GetInt (Dawid Zamirski) - conf: Change virStoragePoolSaveConfig prototype s/configDir/configFile (Erik Skultety) - conf: Introduce virStoragePoolSaveState (Erik Skultety) - conf: Introduce virStoragePoolDefFormatBuf (Erik Skultety) - Auto add virtio-serial controllers (Ján Tomko) - Assign an address when hotplugging a virtio-serial device (Ján Tomko) - Expand the address set when attaching a virtio-serial controller (Ján Tomko) - Allocate virtio-serial addresses when starting a domain (Ján Tomko) - Add functions to track virtio-serial addresses (Ján Tomko) - Add test for virtio serial port assignment (Ján Tomko) - scsi: Remove unused 'type_path' in processLU (John Ferlan) - iscsi: Use error message from virStorageBackendSCSIFindLUs (John Ferlan) - conf: Introduce virStoragePoolSaveXML (Erik Skultety) - storage: Remove unused attribute conn from 'checkPool' callback (Erik Skultety) - Fix indentation in cmdVcpuPin (Ján Tomko) - virsh: remove stale comment (Ján Tomko) - conf: Rename virDomainHasDiskMirror and detect block jobs properly (Shanzhi Yu) - qemu: snapshot: Check for block jobs individually (Peter Krempa) - Remove unnecessary includes from virsh.h (Ján Tomko) - Remove unused includes from virsh (Ján Tomko) - Clean up headers in src/util/virutil.h (Ján Tomko) - Do not include cpu_map.h in libvirtd.c (Ján Tomko) - Use the DEFAULT_DRIVER_DIR macro (Ján Tomko) - Remove unused macros (Ján Tomko) - qemu: Copy bitmap in a sane way (Peter Krempa) - qemu: cgroup: Kill qemuSetupCgroupVcpuPin() (Peter Krempa) - qemu: cgroup: Kill qemuSetupCgroupIOThreadsPin() (Peter Krempa) - qemu: cgroup: Rename qemuSetupCgroupEmulatorPin to qemuSetupCgroupCpusetCpus (Peter Krempa) - qemu: cgroup: Use priv->autoCpuset instead of using qemuPrepareCpumap() (Peter Krempa) - qemu: cgroup: Properly set up vcpu pinning (Peter Krempa) - qemu: cgroup: Refactor setup for IOThread cgroups (Peter Krempa) - qemu: cgroup: Store auto cpuset instead of re-creating it on demand (Peter Krempa) So thanks everybody for your contributions for this release, be it ideas, bug reports, documentations, patches, reviews ... all those releases represent a massive amount of work ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[Libvirt-announce] Entering freeze for libvirt-1.2.15
by Daniel Veillard 02 May '15

02 May '15

I'm a little late, but I have now tagged candidate release 1 for 1.2.15 in git and pushed signed tarballs and rpms to the usual place: ftp://libvirt.org/libvirt/ this seems to work for me in my limited testing, but please give it a try, especially on less common platforms. The https://ci.centos.org/ seems to indicate issues on building the Perl tests as well as virt-manager regression testing, can someone dig into what is happening there ? I will likely push an rc2 on Thursday, and then the final release over the week-end, thanks! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2

[Libvirt-announce] ANNOUNCE: libvirt 1.2.9.3 maintenance release
by Cole Robinson 28 Apr '15

28 Apr '15

libvirt 1.2.9.3 is now available. This is a maintenance release of libvirt 1.2.9 with additional bugfixes that have accumulated upstream since the initial release. This release can be downloaded at: http://libvirt.org/sources/stable_updates/libvirt-1.2.9.3.tar.gz Changes in this version: * storage: fs: Ignore volumes that fail to open with EACCESS/EPERM * domain: conf: Don't validate VM ostype/arch at daemon startup * domain: conf: Better errors on bad os <type> values * Report original error when QMP probing fails with new QEMU * cpu: Add {Haswell,Broadwell}-noTSX CPU models * storage: qemu: Fix security labelling of new image chain elements * Ignore CPU features without a model for host-passthrough * Do not format CPU features without a model * domcaps: Check for architecture more wisely * daemon: Clear fake domain def object that is used to check ACL prior to use * util: identity: Harden virIdentitySetCurrent() * qemu: Build nvram directory at driver startup * qemu: Build channel autosocket directory at driver startup * qemu: chown autoDumpPath on driver startup * qemu: conf: Clarify paths that are relative to libDir * avoid using deprecated udev logging functions * qemu: Always refresh capabilities if no <guests> found * qemu: move setting emulatorpin ahead of monitor showing up * rpc: Don't unref identity object while callbacks still can be executed * conf: tests: fix virDomainNetDefFormat for vhost-user in client mode * Document that USB hostdevs do not need nodeDettach * Document behavior of compat when creating qcow2 volumes * Clarify the meaning of version in redirdev filters * Strip control codes in virBufferEscapeString * Ignore storage volumes with control codes in their names * Strip control characters from sysfs attributes * Add functions dealing with control characters in strings * virNetworkDefUpdateIPDHCPHost: Don't crash when updating network * daemon: avoid memleak when ListAll returns nothing * conf: error out on missing dhcp host attributes * conf: error out on invalid host id * conf: Don't format actual network definition in migratable XML * conf: Fix libvirtd crash and memory leak caused by virDomainVcpuPinDel() For info about past maintenance releases, see: http://wiki.libvirt.org/page/Maintenance_Releases Thanks, Cole

1 0

[Libvirt-announce] ANNOUNCE: libvirt 1.2.13.1 maintenance release
by Cole Robinson 28 Apr '15

28 Apr '15

libvirt 1.2.13.1 is now available. This is a maintenance release of libvirt 1.2.13 with additional bugfixes that have accumulated upstream since the initial release. This release can be downloaded at: http://libvirt.org/sources/stable_updates/libvirt-1.2.13.1.tar.gz Changes in this version: * Fix memory leak in virNetSocketNewConnectUNIX * rng: fix port number range validation * qemu: Don't fail to reboot domains with unresponsive agent * vircommand: fix polling in virCommandProcessIO * util: storage: Fix possible crash when source path is NULL * qemu: set macvtap physdevs online when macvtap is set online * util: set MAC address for VF via netlink message to PF+VF# when possible * xend: Remove a couple of unused function prototypes. * qemuDomainShutdownFlags: Set fakeReboot more frequently * nwfilter: Partly initialize driver even for non-privileged users * virNetSocketNewConnectUNIX: Don't unlink(NULL) * sanlock: Use VIR_ERR_RESOURCE_BUSY if sanlock_acquire fails * qemuMigrationPrecreateStorage: Fix debug message * qemu_migration.c: sleep first before checking for migration status. * qemu_driver: check caps after starting block job * qemu_migrate: use nested job when adding NBD to cookie * util: fix removal of callbacks in virCloseCallbacksRun * qemu: fix race between disk mirror fail and cancel * qemu: fix error propagation in qemuMigrationBegin * qemu: fix crash in qemuProcessAutoDestroy * qemu: blockCopy: Pass adjusted bandwidth when called via blockRebase * virsh: blockCopy: Add missing jump on error path * qemu: end the job when try to blockcopy to non-file destination * nodeinfo: Increase the num of CPU thread siblings to a larger value * relaxng: allow : in /dev/disk/by-path names * qemu: Give hint about -noTSX CPU model * build: fix race when creating the cpu_map.xml symlink * Don't validata filesystem target type * Document behavior of compat when creating qcow2 volumes * Fix typo in error message * qemu: change accidental VIR_WARNING back to VIR_DEBUG * conf: fix parsing of NUMA settings in VM status XML * qemu: skip precreation of network disks * qemu: do not overwrite the error in qemuDomainObjExitMonitor * libxl: Don't overwrite errors from xenconfig * util: more verbose error when failing to create macvtap device * qemu: hotplug: Use checker function to check if disk is empty * qemu: driver: Fix cold-update of removable storage devices * qemu: Check for negative port values in network drive configuration * virsh: fix report of non-active commit completion * util: don't fail if no PortData is found while getting migrateData * Clarify the meaning of version in redirdev filters * xenapi: Resolve Coverity REVERSE_INULL * xenapi: Resolve Coverity REVERSE_INULL * xenapi: Resolve Coverity NULL_RETURNS * xenapi: Resolve Coverity NO_EFFECT * xenapi: Resolve Coverity FORWARD_NULL * RNG: Allow multiple parameters to be passed to an interface filter * domain_conf: fix crash in virDomainObjListFindByUUIDInternal * {domain, network}_conf: disable autostart when deleting config * qemu: Remove unnecessary virReportError on networkGetNetworkAddress return * virQEMUCapsInitQMP: Don't dispose locked @vm * qemu: fix memory leak in qemuAgentGetFSInfo * docs: add a note that spice channel is usable only with spice graphics * locking: Fix flags in virLockManagerLockDaemonNew * tests: fix qemuxml2argvtest to be arch independent * tests: Add test for virtio-mmio address type * qemu: Allow spaces in disk serial * storage: tweak condition to properly test lseek * virsh: tweak domif-getlink link state reporting message * qemu: snapshot: Don't skip check for qcow2 format with network disks * networkLookupByUUID: Improve error message * qemuProcessReconnect: Fill in pid file path * tests : Add test for 'ppc64le' architecture. * RNG: Add 'ppc64le' arch and newer pseries-2.* machine types * schema: Fix interface link state schema * conf: De-duplicate scheduling policy enums * qemu: Don't crash in qemuDomainOpenChannel() * virsh.pod: Update find-storage-pool-sources[-as] man page * iscsi: Adjust error message for findStorageSources backend * virsh.pod: Add information regarding LXC for setmem, memtune, and dominfo * docs: add a note that attr 'managed' is only used by PCI devices * Check if domain is running in qemuDomainAgentIsAvailable * Pass virDomainObjPtr to qemuDomainAgentAvailable * Check for qemu guest agent availability after getting the job * storage: fs: Ignore volumes that fail to open with EACCESS/EPERM * domain: conf: Don't validate VM ostype/arch at daemon startup * domain: conf: Better errors on bad os <type> values * spec: Point fedora --with-loader-nvram at nightly firmware repo * configure: Report --with-loader-nvram value in summary * configure: Fix --loader-nvram typo * cpu: Add {Haswell,Broadwell}-noTSX CPU models * domcaps: Check for architecture more wisely * daemon: Clear fake domain def object that is used to check ACL prior to use * util: identity: Harden virIdentitySetCurrent() * qemu: Always refresh capabilities if no <guests> found * qemu: Build nvram directory at driver startup * qemu: Build channel autosocket directory at driver startup * virQEMUDriverGetConfig: Fix memleak * qemu: chown autoDumpPath on driver startup * qemu: conf: Clarify paths that are relative to libDir * Strip control codes in virBufferEscapeString * util: buffer: Add support for adding text blocks with indentation * Ignore storage volumes with control codes in their names * Strip control characters from sysfs attributes * Add functions dealing with control characters in strings * tests: rename testStripIPv6BracketsData to testStripData * lxc: fix starting a domain with non-strict numa memory mode * lxc: fix starting a domain with a cpuset but no numatune * virsh: fix regression in 'virsh event' by domain * virsh: Improve change-media success message * virNetSocketNewConnectUNIX: Use flocks when spawning a daemon * rpc: Don't unref identity object while callbacks still can be executed * lxc: create the required directories upon driver start * qemu: read backing chain names from qemu * daemon: avoid memleak when ListAll returns nothing * qemu: don't fill in nicindexes for session mode libvirtd For info about past maintenance releases, see: http://wiki.libvirt.org/page/Maintenance_Releases Thanks, Cole

1 0

[Libvirt-announce] Release of libvirt-1.2.14
by Daniel Veillard 02 Apr '15

02 Apr '15

It's out ! The release is tagged in git, signed tarballs and packages are available from the usual place: ftp://libvirt.org/libvirt/ I also tagged and pushed a libvirt-python-1.2.14 release at: ftp://libvirt.org/libvirt/python/ This is a rather large release, around 350 commits, in a balanced set: a few new features, a reasonable set of fixes and a bunch of improvements :-) Features: - qemu: Implement memory device hotplug (Peter Krempa) - Implement public API for virDomainPinIOThread (John Ferlan) - Implement public API for virDomainGetIOThreadsInfo (John Ferlan) - SRIOV NIC offload feature discovery (James Chapman) Documentation: - virCgroupNewPartition: Fix comment (Michal Privoznik) - route element must specify network address (Chen Fan) - no 'via' attribute in route element (Chen Fan) - Document that USB hostdevs do not need nodeDettach (Ján Tomko) - Document behavior of compat when creating qcow2 volumes (Ján Tomko) - Fix typo in error message (Ján Tomko) - Fix common misspellings (Martin Kletzander) - Fix doc for backingStore (Deepak Shetty) - schema and docs for the midonet virtualport type (Antoni Segura Puimedon) - add a note that spice channel is usable only with spice graphics (Pavel Hrdina) - net-define: update or unify documentation (Pavel Hrdina) - pool-define: update and unify documentation (Pavel Hrdina) - iface-define: update and unify documentation (Pavel Hrdina) - Fix syntax for vcpupin description (John Ferlan) - virsh.pod: Add information regarding LXC for setmem, memtune, and dominfo (John Ferlan) - add a note that attr 'managed' is only used by PCI devices (Erik Skultety) Portability: - build: avoid variable named 'interface', for mingw (Eric Blake) - vircgroup: Fix build issue mingw cross compile (John Ferlan) - vircgroup: Fix build issue on mingw cross compile (John Ferlan) - virnetdev: fix build with old kernel (Pavel Hrdina) - Fix build on mingw (Ján Tomko) Bug fixes: - qemu: blockjob: Synchronously update backing chain in XML on ABORT/PIVOT (Peter Krempa) - qemu: processBlockJob: Don't unlock @vm twice (Peter Krempa) - qemu: blockCopy: Pass adjusted bandwidth when called via blockRebase (Peter Krempa) - virsh: blockCopy: Add missing jump on error path (Luyao Huang) - qemuDomainGetNumaParameters: Check for the correct CGroup controller (Michal Privoznik) - virCgroupController: Check the enum fits into 'int' (Michal Privoznik) - virnetlink: fix build error (Pavel Hrdina) - qemu: end the job when try to blockcopy to non-file destination (Shanzhi Yu) - relaxng: allow : in /dev/disk/by-path names (Eric Blake) - libxl: Fix memory leak if pthread_create fails. (Konrad Rzeszutek Wilk) - util: use netlink to delete bridge devices (Laine Stump) - qemu: command: Fix property name for start address of a pc-dimm module (Luyao Huang) - qemu: command: Check for empty network source when formatting drive cmd (Peter Krempa) - qemu: command: Report error when formatting network source with protocol _NONE (Peter Krempa) - build: fix race when creating the cpu_map.xml symlink (Amy Fong) - Don't validata filesystem target type (Guido Günther) - rpc: Don't unref identity object while callbacks still can be executed (Peter Krempa) - util: identity: Harden virIdentitySetCurrent() (Peter Krempa) - qemu: domain: Don't leak device alias list (Peter Krempa) - rpc: serverclient: Clear pointer with NULL instead of 0 (Peter Krempa) - qemu: fix set vcpus on host without NUMA (Pavel Hrdina) - qemu: monitor: Don't leak @props with non-JSON in qemuMonitorAddObject (Peter Krempa) - qemu: Don't return memory device config on error in qemuBuildMemoryBackendStr (Peter Krempa) - Fix underlinking of libvirt_driver_interface.so (Natanael Copa) - networkStateInitialize: Don't lock network driver (Michal Privoznik) - qemu: Migrate memory on numatune change (Martin Kletzander) - parallels: fix libvirt crash if parallelsNetworkOpen fails (Maxim Nestratov) - qemu: do not overwrite the error in qemuDomainObjExitMonitor (Luyao Huang) - libxl: Don't overwrite errors from xenconfig (Jim Fehlig) - qemu: Fix two issues in qemuDomainSetVcpus error handling (John Ferlan) - qemu: track 'cancelling' migration state (Eric Blake) - parallels: don't prevent domain define if VIR_DOMAIN_NET_TYPE_BRIDGE (Maxim Nestratov) - parallels: switch off offline management feature (Maxim Nestratov) - parallels: set correct network adapter link state (Maxim Nestratov) - parallels: fix parallelsLoadNetworks (Maxim Nestratov) - network: Resolve Coverity FORWARD_NULL (John Ferlan) - qemuGetDHCPInterfaces: Don't leak @network (Michal Privoznik) - cmdDomIfAddr: Free @ip_addr_str (Michal Privoznik) - qemu: read backing chain names from qemu (Eric Blake) - qemu: driver: Fix cold-update of removable storage devices (Peter Krempa) - parallels: fix home directory for VMs (Maxim Nestratov) - parallels: don't forget to unlock domain if unregister fails (Maxim Nestratov) - parallels: set cpu mode when applying xml configuration (Mikhail Feoktistov) - conf: Use correct type for balloon stats period (Martin Kletzander) - qemu: Don't duplicate errors when settings stats period (Martin Kletzander) - libxl: fix regression introduced by commit 4ab8cd77 (Jim Fehlig) - qemu: block-commit: Mark disk in block jobs only on successful command (Peter Krempa) - daemon: avoid memleak when ListAll returns nothing (Eric Blake) - qemu: Fix possible memory leak in qemuDomainPinVcpuFlags (John Ferlan) - qemu: Disallow concurrent block jobs on a single disk (Peter Krempa) - qemu: event: Don't fiddle with disk backing trees without a job (Peter Krempa) - qemu: Check for negative port values in network drive configuration (Erik Skultety) - network: avoid memory leak of dnsmasq capabilities (Eric Blake) - virsh: fix report of non-active commit completion (Eric Blake) - util: don't fail if no PortData is found while getting migrateData (zhang bo) - libxl: prevent attaching multiple netdevs with the same MAC (Marek Marczykowski-Górecki) - parallels: fix prlsdkCheckUnsupportedParams checks (Maxim Nestratov) - Error out on an address for isa-serial in QEMU driver. (Ján Tomko) - xenapi: Resolve Coverity REVERSE_INULL (John Ferlan) - xenapi: Resolve Coverity REVERSE_INULL (John Ferlan) - xenapi: Resolve Coverity NULL_RETURNS (John Ferlan) - xenapi: Resolve Coverity NO_EFFECT (John Ferlan) - xenapi: Resolve Coverity FORWARD_NULL (John Ferlan) - conf: Resolve Coverity RESOURCE_LEAK (John Ferlan) - parallels: prevent domain define only if vcpupin is specified (Maxim Nestratov) - parallels: prevent domain define only if NUMA is really specified (Maxim Nestratov) - parallels: don't forget to unlock domain in parallelsDomainHasManagedSaveImage (Maxim Nestratov) - domain_conf: fix crash in virDomainObjListFindByUUIDInternal (Michael Chapman) - {domain, network}_conf: disable autostart when deleting config (Michael Chapman) - virQEMUCapsInitQMP: Don't dispose locked @vm (Michal Privoznik) - qemu: fix memory leak in qemuAgentGetFSInfo (Chen Fan) - qemu: don't fill in nicindexes for session mode libvirtd (Laine Stump) - virnet*: Don't unlock object in dispose (Michal Privoznik) - sanlock: Don't spam logs with "target pid not found" (Jiri Denemark) - qemu: Resolve Coverity CHECKED_RETURN issue (John Ferlan) - conf: Remove duplicate entries in <metadata> by namespace (Peter Krempa) - qemu: Allow spaces in disk serial (Michal Privoznik) - parallels: Cleanup partly opened drivers on connect open failure (Michal Privoznik) - qemu: snapshot: Don't skip check for qcow2 format with network disks (Shanzhi Yu) - testNetworkUpdate: Unlock network at the end (Michal Privoznik) - qemuProcessReconnect: Fill in pid file path (Michal Privoznik) - qemu: check defaultMode for spice graphics independently (Pavel Hrdina) - schema: Fix interface link state schema (Peter Krempa) - qemu: Don't crash in qemuDomainOpenChannel() (Martin Kletzander) - disk: Provide a default storage source format type. (John Ferlan) - disk: Disallow duplicated target 'dev' values (John Ferlan) - phyp: Fix error messages mentioning memory (Peter Krempa) - storage: sheepdog: Avoid skipping variable initialization (Peter Krempa) - Check if domain is running in qemuDomainAgentIsAvailable (Ján Tomko) - Revert "Restore skipping of setting capacity" (Ján Tomko) Improvements: - tests: nodeinfo: Add test for RHELSA on APM mustang (Cole Robinson) - tests: nodeinfo: Test F21 aarch64 on APM mustang (Cole Robinson) - qemu: Extract internals of processBlockJobEvent into a helper (Peter Krempa) - virCgroupNew: Enhance debug message (Michal Privoznik) - tests: introduce qemucaps2xmlmock (Pavel Hrdina) - nodeinfo: Increase the num of CPU thread siblings to a larger value (Wei Huang) - util: use netlink to create bridge devices (Laine Stump) - util: replace body of virNetDevMacVLanDelete() with virNetlinkDelLink() (Laine Stump) - util: netlink function to delete any network device (Laine Stump) - maint: update to latest gnulib (Eric Blake) - Rename DomainGetIOThreadsInfo to DomainGetIOThreadInfo (Ján Tomko) - Rename qemuMonitorIOThreadsInfo* to qemuMonitorIOThreadInfo* (Ján Tomko) - Rename virDomainIOThreadsInfoFree to virDomainIOThreadInfoFree (Ján Tomko) - virsh: rename iothreadsinfo to iothreadinfo (Ján Tomko) - qemu: Give hint about -noTSX CPU model (Jiri Denemark) - cpu: Add {Haswell,Broadwell}-noTSX CPU models (Jiri Denemark) - tests: qemuxml2xml: Test status XML formatting and parsing (Peter Krempa) - util: buffer: Add support for adding text blocks with indentation (Peter Krempa) - daemon: Clear fake domain def object that is used to check ACL prior to use (Peter Krempa) - tests: qemuxml2xml: Refactor the qemuxml2xml test (Peter Krempa) - qemu: Report better error when memory device source has wrong NUMA node (Luyao Huang) - util: NUMA: Change error code in virNumaNodesetIsAvailable() (Peter Krempa) - conf: Add missing apostrophe to error message (Luyao Huang) - Makefile: fix typo (Pavel Hrdina) - qemu: Add timing to domain jobs (Jiri Denemark) - qemu: Track the API which started the current job (Jiri Denemark) - Set thread job for every RPC call (Jiri Denemark) - virThreadPool: Set thread worker name (Jiri Denemark) - virThread: Set thread job (Jiri Denemark) - Force usage of virThreadCreate (Jiri Denemark) - Add support for tracking thread jobs (Jiri Denemark) - POTFILES.in: Sort (Jiri Denemark) - libxl: remove per-domain libxl_ctx (Jim Fehlig) - libxl: make libxlDomainFreeMem static (Jim Fehlig) - libxl: remove unnecessary libxlDomainEventsRegister (Jim Fehlig) - libxl: use global libxl_ctx in event handler (Jim Fehlig) - libxl: move event registration to driver initialization (Jim Fehlig) - libxl: Move setup of child processing code to driver initialization (Jim Fehlig) - libxl: use driver-wide ctx in fd and timer event handling (Jim Fehlig) - qemu: cleanup setvcpus (Pavel Hrdina) - qemu: move virDomainLiveConfigHelperMethod right after BeginJob (Pavel Hrdina) - qemu: change accidental VIR_WARNING back to VIR_DEBUG (Laine Stump) - qemucaps2xmltest: fix the test to correspond to new domain formatting (Pavel Hrdina) - conf: fix parsing of NUMA settings in VM status XML (Luyao Huang) - qemu: Implement memory device hotunplug (Peter Krempa) - qemu: conf: Add support for memory device cold(un)plug (Peter Krempa) - qemu: add support for memory devices (Peter Krempa) - qemu: migration: Forbid migration with memory modules lacking info (Peter Krempa) - qemu: memdev: Add infrastructure to load memory device information (Peter Krempa) - conf: Add interface to parse and format memory device information (Peter Krempa) - conf: Add device address type for dimm devices (Peter Krempa) - qemu: Implement setup of memory hotplug parameters (Peter Krempa) - conf: Add support for parsing and formatting max memory and slot count (Peter Krempa) - libxl: Refactor logic in domain post parse callback (Peter Krempa) - qemu: Set default SCSI controller model for S390 arch (Boris Fiuczynski) - qemu: skip precreation of network disks (Michael Chapman) - network_conf: Drop virNetworkObjIsDuplicate (Michal Privoznik) - objecteventtest: Check for virNetwork* return values (Michal Privoznik) - cgroup: Add accessors for cpuset.memory_migrate (Martin Kletzander) - maint: update .mailmap for recent contributions (Eric Blake) - libxl: use xenlight pkgconfig file if present (Jim Fehlig) - util: more verbose error when failing to create macvtap device (Laine Stump) - util: clean up #includes of virnetdevopenvswitch.h (Laine Stump) - util: vhost user: support for bootindex (zhang bo) - parallels: make E1000 network adapter model default (Maxim Nestratov) - parallels: better bridge network interface support (Maxim Nestratov) - parallels: introduce and use string constants for network types and names (Maxim Nestratov) - maint: Distribute tests/vircgroupdata (Jiri Denemark) - Use PAUSED state for domains that are starting up (Jiri Denemark) - tests: Add tests for virCgroupDetectMounts (Jiri Denemark) - qemuAgentGetInterfaces: Don't error out on missing HW address (Michal Privoznik) - virsh: Adapt to new HW address scenario (Michal Privoznik) - RPC: Allow HW address in remote_domain_interface struct to be NULL (Michal Privoznik) - network: Add midonet virtual port type support to qemu (Antoni Segura Puimedon) - util: functions to support binding/unbinding midonet virtualports (Antoni Segura Puimedon) - conf: disk: Simplify checking if source definition was parsed (Peter Krempa) - util: storage: Fix check for empty storage device (Peter Krempa) - qemu: hotplug: Use checker function to check if disk is empty (Peter Krempa) - virsh: domain: Fix the change-media command (Peter Krempa) - virsh: domain: Add --print-xml flag for command change-media (Peter Krempa) - virsh: domain: Don't use vshPrepareDiskXML for creating XML to detach disk (Peter Krempa) - parallels_sdk.c: minor cleanup (Maxim Nestratov) - domifaddr: Add virsh support (Nehal J Wani) - domifaddr: Implement the API for qemu (Nehal J Wani) - domifaddr: Implement the remote protocol (Nehal J Wani) - domifaddr: Implement the public APIs (Nehal J Wani) - conf: Reorder elements inside memballoon (Martin Kletzander) - util: Make sure the comment about virBufferAddBuffer is true (Martin Kletzander) - wireshark: fix VPATH build (Pavel Hrdina) - qemu_command: Fix some indentation and a typo (Luyao Huang) - rpm-build: use pkg-config to detect wireshark presence (Pavel Hrdina) - Remove virDomainIOThreadsPinDel (John Ferlan) - Replace virDomainVcpuPinDel with virDomainPinDel (John Ferlan) - Replace virDomainIOThreadsPinAdd with virDomainPinAdd (John Ferlan) - Replace virDomainVcpuPinAdd with virDomainPinAdd (John Ferlan) - Convert virDomainVcpuPinFindByVcpu into virDomainPinFindByVcpu (John Ferlan) - Convert virDomainVcpuPinIsDuplicate into virDomainPinIsDuplicate (John Ferlan) - Convert virDomainVcpuPinDefCopy into virDomainPinDefCopy (John Ferlan) - Convert virDomainVcpuPinDefArrayFree to virDomainPinDefArrayFree (John Ferlan) - Convert virDomainVcpuPinDefFree to virDomainPinDefFree (John Ferlan) - Convert virDomainPinDefPtr->vcpuid to virDomainPinDefPtr->id (John Ferlan) - Convert virDomainVcpuPinDefPtr to virDomainPinDefPtr (John Ferlan) - conf: Make specifying <memory> optional (Peter Krempa) - conf: Automatically use NUMA memory size in case NUMA is enabled (Peter Krempa) - qemu: command: Add helper to align memory sizes (Peter Krempa) - conf: Replace access to def->mem.max_balloon with accessor functions (Peter Krempa) - qemu: process: Export qemuProcessFindDomainDiskByAlias (Peter Krempa) - AUTHORS: add myself to commiters list (Erik Skultety) - netdev: silence valgrind warning about ioctl use (Eric Blake) - conf: add virDomainHasNet (Marek Marczykowski-Górecki) - tests: xenconfig: test for multiple USB devices and other HVM options (Marek Marczykowski-Górecki) - xenconfig: add support for multiple USB devices syntax (Marek Marczykowski-Górecki) - libxl: add tablet/mouse input device support (Marek Marczykowski) - bridge_driver: Use more of networkObjFromNetwork (Michal Privoznik) - parallels_network: Drop parallelsDriverLock() from everywhere. (Michal Privoznik) - test_driver: Drop testDriverLock() from almost everywhere (Michal Privoznik) - bridge_driver: Drop networkDriverLock() from almost everywhere (Michal Privoznik) - struct _virNetworkDriverState: Annotate items (Michal Privoznik) - network_driver: Use accessor for dnsmasqCaps (Michal Privoznik) - bridge_driver: Don't access global driver randomly (Michal Privoznik) - Introduce virBitmapIsBitSet (Ján Tomko) - Clarify the meaning of version in redirdev filters (Ján Tomko) - vmx: add e1000e to supported NIC models. (Dawid Zamirski) - vbox: use user cache dir when screenshotting. (Dawid Zamirski) - parallels: add VIR_ARCH_I686 capability to parallels driver (Maxim Nestratov) - virsh: Add iothreadpin command (John Ferlan) - qemu: Add support to pin IOThreads to specific CPU (John Ferlan) - domain: Introduce virDomainIOThreadsPin{Add|Del} (John Ferlan) - remote: Implement the plumbing for virDomainPinIOThread (John Ferlan) - virNetworkObjFindBy*: Return an reference to found object (Michal Privoznik) - virNetworkObjListPtr: Make APIs self-locking (Michal Privoznik) - network_conf: Introduce locked versions of lookup functions (Michal Privoznik) - virNetworkObjList: Derive from virObjectLockableClass (Michal Privoznik) - parallels_network: Use virNetworkObjEndAPI (Michal Privoznik) - test_driver: Use virNetworkObjEndAPI (Michal Privoznik) - bridge_driver: Use virNetworkObjEndAPI (Michal Privoznik) - network_conf: Introduce virNetworkObjEndAPI (Michal Privoznik) - network_conf: Make virNetworkObj actually virObject (Michal Privoznik) - virNetworkObjListPtr: Turn list into a hash table (Michal Privoznik) - qemu: monitor: Kill qemuMonitorGetBlockStats(Info,ParamsNumber) (Peter Krempa) - test: qemu: json: Avoid using the now obsolete functions (Peter Krempa) - qemu: blockstats: Refactor qemuDomainBlockStatsFlags (Peter Krempa) - qemu: blockstats: Add support for totalled block statistics (Peter Krempa) - qemu: Split out working code qemuDomainBlockStats (Peter Krempa) - qemu: monitor: Count block stats fields in qemuMonitorGetAllBlockStatsInfo (Peter Krempa) - qemu: monitor: Convert common code to a macro (Peter Krempa) - qemu: monitor: Implement HMP version for listing all block device stats (Peter Krempa) - test: qemu: Fix qemu monitor test utils to allow testing HMP (Peter Krempa) - qemu: blockstats: Switch to caller allocated hash table (Peter Krempa) - qemu: monitor: Drop parsing of 'errs' from block info (Peter Krempa) - qemu: Use macro to set block stats typed parameters (Peter Krempa) - RNG: Allow multiple parameters to be passed to an interface filter (Michal Privoznik) - parallels: cpumask support (Maxim Nestratov) - qemu: Remove unnecessary virReportError on networkGetNetworkAddress return (Luyao Huang) - Reverse the logic in virbitmaptest (Ján Tomko) - Use virBitmapNextClearBit in networkNextClassID (Ján Tomko) - network_conf: Turn struct _virNetworkObjList private (Michal Privoznik) - network_conf: Turn virNetworkObjList into virObject (Michal Privoznik) - parallels_network: Adapt to new virNetworkObjList accessors (Michal Privoznik) - test_driver: Adapt to new virNetworkObjList accessors (Michal Privoznik) - bridge_driver: Adapt to new virNetworkObjList accessors (Michal Privoznik) - network_conf: Introduce virNetworkObjListPrune (Michal Privoznik) - network_conf: Introduce virNetworkObjListNumOfNetworks (Michal Privoznik) - network_conf: Introduce virNetworkObjListGetNames (Michal Privoznik) - network_conf: Introduce virNetworkObjListForEach (Michal Privoznik) - locking: Fix flags in virLockManagerLockDaemonNew (Jiri Denemark) - tests: fix qemuxml2argvtest to be arch independent (Pavel Hrdina) - qemu: Change qemuDomainGetEmulatorPinInfo bitmap manipulation (John Ferlan) - qemu: Change qemuDomainGetVcpuPinInfo bitmap manipulation (John Ferlan) - qemu: Change/Fix IOThread CPU affinity bitmap manipulation (John Ferlan) - Remove ReadOnly check for GetIOThreadsInfo (John Ferlan) - tests: Add test for os interleaving (Martin Kletzander) - tests: Add test for virtio-mmio address type (Martin Kletzander) - domain_conf: Format <pvpanic/> without address correctly (Michal Privoznik) - Refresh translations from Zanata (Daniel P. Berrange) - virsh: Add 'iothreadsinfo' command (John Ferlan) - qemu: Implement the qemu driver fetch for IOThreads (John Ferlan) - remote: Implement the remote plumbing for virDomainGetIOThreadsInfo (John Ferlan) - memtune: change the way how we store unlimited value (Pavel Hrdina) - virutil: introduce helper functions for memory limits (Pavel Hrdina) - virsh: fix memtune to also accept 0 as valid value (Pavel Hrdina) - qemu: Pass file descriptor when using TPM passthrough (Stefan Berger) - qemu: Move TPM command line build code into own function (Stefan Berger) - utils: Implement virCommandPassFDGetFDIndex (Stefan Berger) - libxl: remove unneeded cleanup_unlock label (Jim Fehlig) - libxl: use libxl_ctx passed to libxlConsoleCallback (Jim Fehlig) - libxl: remove redundant calls to libxl_evdisable_domain_death (Jim Fehlig) - spec: Enable RBD storage driver in RHEL-7 (Peter Krempa) - storage: tweak condition to properly test lseek (Erik Skultety) - virsh: tweak domif-getlink link state reporting message (Erik Skultety) - qemu: Allow inactive domains in qemuDomainGetControlInfo() (Peter Krempa) - qemu: Properly report error state in qemuDomainGetControlInfo() (Peter Krempa) - conf: s/virNetworkFindByName/virNetworkObjFindByName/ (Michal Privoznik) - conf: s/virNetworkFindByUUID/virNetworkObjFindByUUID/ (Michal Privoznik) - bridge_driver: s/virNetworkObjList/virNetworkObjListPtr/ (Michal Privoznik) - parallels: s/virNetworkObjList/virNetworkObjListPtr/ (Michal Privoznik) - test_driver: s/virNetworkObjList/virNetworkObjListPtr/ (Michal Privoznik) - virNetworkObjListExport: Pass virNetworkObjListPtr (Michal Privoznik) - virNetworkObjListFree: Accept NULL (Michal Privoznik) - virNetworkObjIsDuplicate: s/@doms/@nets/ (Michal Privoznik) - networkGetNetworkAddress: Drop empty 'error' label (Michal Privoznik) - bridge_driver: Don't check network active unlocked (Michal Privoznik) - networkLookupByUUID: Improve error message (Michal Privoznik) - qemu: remove duplicated code for allocating spice ports (Pavel Hrdina) - tests : Add test for 'ppc64le' architecture. (Prerna Saxena) - RNG: Add 'ppc64le' arch and newer pseries-2.* machine types (Prerna Saxena) - conf: De-duplicate scheduling policy enums (Martin Kletzander) - virsh.pod: Update find-storage-pool-sources[-as] man page (John Ferlan) - iscsi: Adjust error message for findStorageSources backend (John Ferlan) - virsh: Adjust domblklist to understand disk volume syntax (John Ferlan) - conf: numa: Add helper to count total memory size configured in NUMA (Peter Krempa) - qemu: Forbid setting maximum memory size with the API with NUMA enabled (Peter Krempa) - Pass virDomainObjPtr to qemuDomainAgentAvailable (Ján Tomko) - Check for qemu guest agent availability after getting the job (Ján Tomko) - Allow creating volumes with a backing store but no capacity (Ján Tomko) - Allow omitting volume capacity when backing store is specified (Ján Tomko) - Probe for capacity in virStorageBackendUpdateVolTargetInfo (Ján Tomko) - Allow cloning volumes with no capacity specified (Ján Tomko) - Allow parsing volumes without specifying the capacity (Ján Tomko) - Parse backingStore before capacity in volume XML (Ján Tomko) - Add flags argument to virStorageVolDefParse* (Ján Tomko) - Add --migratable support to virsh cpu-baseline (Ján Tomko) - Trivially implement VIR_CONNECT_BASELINE_CPU_MIGRATABLE for non-x86 cpus (Ján Tomko) - Implement VIR_CONNECT_BASELINE_CPU_MIGRATABLE in the x86 cpu driver (Ján Tomko) - Add VIR_CONNECT_BASELINE_CPU_MIGRATABLE flag (Ján Tomko) - Use virBufferTrim when generating boot options (Ján Tomko) - Make -boot arg generation more readable (Ján Tomko) - Remove code handling the QEMU_CAPS_DOMID capability (Ján Tomko) - Remove bootloader option from QEMU (Ján Tomko) Thanks everybody who contributed to this release, with code, ideas bug reports, docs, localizations, or patch reviews. Enjoy ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

1 0

[Libvirt-announce] Entering freeze for libvirt-1.2.14
by Daniel Veillard 31 Mar '15

31 Mar '15

I have tagged a release candidate 1 in git and generated signed tarballs and rpms at the usual place: ftp://libvirt.org/libvirt/ This seems to work normally in my limited testing but others need to give it a serious try ! I think I will do an RC2 on Monday, and if everything look file the final release will be on April 1st. Thanks in advance for reports about it ! Daniel -- Daniel Veillard | Open Source and Standards, Red Hat veillard(a)redhat.com | libxml Gnome XML XSLT toolkit http://xmlsoft.org/ http://veillard.com/ | virtualization library http://libvirt.org/

2 2