12:16 p.m.
On 22.10.2014 00:03, David Roundy wrote:
Hi Michal,
I am attaching debug logs.
David
Well, I can see the error message there, but not the reason. Does the
/etc/libvirt/qemu/networks/default.xml file exist?
Michal
12:32 p.m.
New subject: [libvirt-users] virsh net-start default fails
Yes, /etc/libvirt/qemu/networks/default.xml exists and has the contents:
$ cat /etc/libvirt/qemu/networks/default.xml
<network>
<name>default</name>
<bridge name="virbr0" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
</dhcp>
</ip>
</network>
On Thu, Oct 23, 2014 at 10:16 AM, Michal Privoznik <mprivozn(a)redhat.com>
wrote:
On 22.10.2014 00:03, David Roundy wrote:
> Hi Michal,
>
> I am attaching debug logs.
>
> David
>
Well, I can see the error message there, but not the reason. Does the
/etc/libvirt/qemu/networks/default.xml file exist?
Michal
--
David Roundy
9:52 p.m.
New subject: [libvirt-users] virsh net-start default fails
Same error i faced i edited default.xml using the below command
virsh net-edit default
<network>
<name>default</name>
<uuid>Your Uuid number</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr0' stp='on' delay='0'/>
<mac address='Your MAc'/>
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.122.2' end='192.168.122.254'/>
</dhcp>
</ip>
</network>
Then added virtual bridge
brctl addbr virbr0
Then restart the libvirt..
On Thu, Nov 20, 2014 at 12:02 AM, David Roundy <
roundyd(a)physics.oregonstate.edu> wrote:
Yes, /etc/libvirt/qemu/networks/default.xml exists and has the
contents:
$ cat /etc/libvirt/qemu/networks/default.xml
<network>
<name>default</name>
<bridge name="virbr0" />
<forward/>
<ip address="192.168.122.1" netmask="255.255.255.0">
<dhcp>
<range start="192.168.122.2" end="192.168.122.254" />
</dhcp>
</ip>
</network>
On Thu, Oct 23, 2014 at 10:16 AM, Michal Privoznik <mprivozn(a)redhat.com>
wrote:
> On 22.10.2014 00:03, David Roundy wrote:
>
>> Hi Michal,
>>
>> I am attaching debug logs.
>>
>> David
>>
>
> Well, I can see the error message there, but not the reason. Does the
> /etc/libvirt/qemu/networks/default.xml file exist?
>
> Michal
>
--
David Roundy
_______________________________________________
libvirt-users mailing list
libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
--
*Regards,Ajitha R*
3:08 a.m.
New subject: [libvirt-users] virsh net-start default fails
On 20.11.2014 04:52, Ajitha Robert wrote:
Same error i faced i edited default.xml using the below command
virsh net-edit default
<network>
<name>default</name>
<uuid>Your Uuid number</uuid>
<forward mode='nat'>
<nat>
<port start='1024' end='65535'/>
</nat>
</forward>
<bridge name='virbr0' stp='on' delay='0'/>
<mac address='Your MAc'/>
<ip address='192.168.122.1' netmask='255.255.255.0'>
<dhcp>
<range start='192.168.122.2' end='192.168.122.254'/>
</dhcp>
</ip>
</network>
Then added virtual bridge
brctl addbr virbr0
Then restart the libvirt..
Interesting. I see proper error in this case:
virsh # net-start default
error: Failed to start network default
error: Unable to create bridge virbr0: File exists
Having said that, you shouldn't create virbr0 yourself, libvirt handles
that. On the other hand, we should produce more meaningful error
message. What's the libvirt version?
Michal
3685
days inactive
3713
days old
3 comments
3 participants
participants (3)
-
Ajitha Robert -
David Roundy -
Michal Privoznik