10:06 a.m.
v2 of:
https://www.redhat.com/archives/libvir-list/2017-November/msg00213.html
diff to v1:
-cmdComplete reworked
-Dozen of small improvements
The command completion is still missing. I mean, 'virsh
start<TAB><TAB>' will
still give you list of --options rather than a list of domains to start with
it. And honestly, the code is so ugly, that I haven't even tried to implement
it. Be my guest.
Michal Privoznik (12):
vshCommandParse: Don't leak @tkdata
vshCommandStringParse: Allow retrieving partial result
vshReadlineParse: Escape returned results if needed
vshCommandOpt: Allow caller avoiding assert()
vsh: Fix vshCompleter signature
vsh: Call vshCmdOptDef.completer properly
vshCompleter: Pass partially parsed command
vsh: Introduce complete command
tools: Provide bash autompletion file
virsh: Introduce virshDomainNameCompleter
virsh: Introduce virshDomainInterfaceCompleter
virt-admin: Introduce vshAdmServerCompleter
configure.ac | 3 +
libvirt.spec.in | 2 +
m4/virt-bash-completion.m4 | 74 ++++++++++++++
tools/Makefile.am | 40 +++++++-
tools/bash-completion/vsh | 67 +++++++++++++
tools/virsh-completer.c | 150 ++++++++++++++++++++++++++++
tools/virsh-completer.h | 41 ++++++++
tools/virsh-domain-monitor.c | 33 +++---
tools/virsh-domain.c | 186 +++++++++++++++++-----------------
tools/virsh-snapshot.c | 24 ++---
tools/virsh.c | 5 +-
tools/virsh.h | 7 +-
tools/virt-admin-completer.c | 76 ++++++++++++++
tools/virt-admin-completer.h | 33 ++++++
tools/virt-admin.c | 13 ++-
tools/vsh.c | 232 +++++++++++++++++++++++++++++++++----------
tools/vsh.h | 23 ++++-
17 files changed, 831 insertions(+), 178 deletions(-)
create mode 100644 m4/virt-bash-completion.m4
create mode 100644 tools/bash-completion/vsh
create mode 100644 tools/virsh-completer.c
create mode 100644 tools/virsh-completer.h
create mode 100644 tools/virt-admin-completer.c
create mode 100644 tools/virt-admin-completer.h
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 01/12] vshCommandParse: Don't leak @tkdata
When parsing cmd line which has "--" on it, this is leaked.
Problem is, parser->getNextArg() allocates new string and stores
it into tkdata. But as soon as "--" is detected 'continue' is
issued without any free of the allocated memory.
==5304== 3 bytes in 1 blocks are definitely lost in loss record 1 of 782
==5304== at 0x4C2AF50: malloc (vg_replace_malloc.c:299)
==5304== by 0x8BB5AA9: strdup (strdup.c:42)
==5304== by 0x55842CA: virStrdup (virstring.c:941)
==5304== by 0x172B21: _vshStrdup (vsh.c:162)
==5304== by 0x175E8E: vshCommandArgvGetArg (vsh.c:1622)
==5304== by 0x17551D: vshCommandParse (vsh.c:1418)
==5304== by 0x175F25: vshCommandArgvParse (vsh.c:1638)
==5304== by 0x130940: virshParseArgv (virsh.c:820)
==5304== by 0x130C49: main (virsh.c:922)
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/tools/vsh.c b/tools/vsh.c
index 10a65c39f..93291feeb 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -1494,6 +1494,7 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
}
} else if (tkdata[0] == '-' && tkdata[1] == '-'
&&
tkdata[2] == '\0') {
+ VIR_FREE(tkdata);
data_only = true;
continue;
} else {
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 02/12] vshCommandStringParse: Allow retrieving partial result
In the future, this function is going to be called from
vshReadlineParse() to provide parsed input for completer
callbacks. The idea is to allow the callbacks to provide more
specific data. For instance, for the following input:
virsh # domifaddr --domain fedora --interface <TAB><TAB>
the --interface completer callback is going to be called. Now, it
is more user friendly if the completer offers only those
interfaces found in 'fedora' domain. But in order to do that it
needs to be able to retrieve partially parsed result.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/virsh.c | 4 ++--
tools/virt-admin.c | 4 ++--
tools/vsh.c | 67 ++++++++++++++++++++++++++++++++++--------------------
tools/vsh.h | 2 +-
4 files changed, 47 insertions(+), 30 deletions(-)
diff --git a/tools/virsh.c b/tools/virsh.c
index d1789f03a..d0c135016 100644
--- a/tools/virsh.c
+++ b/tools/virsh.c
@@ -815,7 +815,7 @@ virshParseArgv(vshControl *ctl, int argc, char **argv)
ctl->imode = false;
if (argc - optind == 1) {
vshDebug(ctl, VSH_ERR_INFO, "commands: \"%s\"\n",
argv[optind]);
- return vshCommandStringParse(ctl, argv[optind]);
+ return vshCommandStringParse(ctl, argv[optind], NULL);
} else {
return vshCommandArgvParse(ctl, argc - optind, argv + optind);
}
@@ -952,7 +952,7 @@ main(int argc, char **argv)
#if WITH_READLINE
add_history(ctl->cmdstr);
#endif
- if (vshCommandStringParse(ctl, ctl->cmdstr))
+ if (vshCommandStringParse(ctl, ctl->cmdstr, NULL))
vshCommandRun(ctl, ctl->cmd);
}
VIR_FREE(ctl->cmdstr);
diff --git a/tools/virt-admin.c b/tools/virt-admin.c
index e529a2891..b8b33af19 100644
--- a/tools/virt-admin.c
+++ b/tools/virt-admin.c
@@ -1335,7 +1335,7 @@ vshAdmParseArgv(vshControl *ctl, int argc, char **argv)
ctl->imode = false;
if (argc - optind == 1) {
vshDebug(ctl, VSH_ERR_INFO, "commands: \"%s\"\n",
argv[optind]);
- return vshCommandStringParse(ctl, argv[optind]);
+ return vshCommandStringParse(ctl, argv[optind], NULL);
} else {
return vshCommandArgvParse(ctl, argc - optind, argv + optind);
}
@@ -1555,7 +1555,7 @@ main(int argc, char **argv)
#if WITH_READLINE
add_history(ctl->cmdstr);
#endif
- if (vshCommandStringParse(ctl, ctl->cmdstr))
+ if (vshCommandStringParse(ctl, ctl->cmdstr, NULL))
vshCommandRun(ctl, ctl->cmd);
}
VIR_FREE(ctl->cmdstr);
diff --git a/tools/vsh.c b/tools/vsh.c
index 93291feeb..2a83dc475 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -1387,26 +1387,27 @@ struct _vshCommandParser {
};
static bool
-vshCommandParse(vshControl *ctl, vshCommandParser *parser)
+vshCommandParse(vshControl *ctl, vshCommandParser *parser, vshCmd **partial)
{
char *tkdata = NULL;
vshCmd *clast = NULL;
vshCmdOpt *first = NULL;
+ const vshCmdDef *cmd = NULL;
- if (ctl->cmd) {
+ if (!partial && ctl->cmd) {
vshCommandFree(ctl->cmd);
ctl->cmd = NULL;
}
while (1) {
vshCmdOpt *last = NULL;
- const vshCmdDef *cmd = NULL;
vshCommandToken tk;
bool data_only = false;
uint64_t opts_need_arg = 0;
uint64_t opts_required = 0;
uint64_t opts_seen = 0;
+ cmd = NULL;
first = NULL;
while (1) {
@@ -1425,7 +1426,8 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
if (cmd == NULL) {
/* first token must be command name */
if (!(cmd = vshCmddefSearch(tkdata))) {
- vshError(ctl, _("unknown command: '%s'"), tkdata);
+ if (!partial)
+ vshError(ctl, _("unknown command: '%s'"),
tkdata);
goto syntaxError; /* ... or ignore this command only? */
}
@@ -1437,9 +1439,10 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
}
if (vshCmddefOptParse(cmd, &opts_need_arg,
&opts_required) < 0) {
- vshError(ctl,
- _("internal error: bad options in command:
'%s'"),
- tkdata);
+ if (!partial)
+ vshError(ctl,
+ _("internal error: bad options in command:
'%s'"),
+ tkdata);
goto syntaxError;
}
VIR_FREE(tkdata);
@@ -1474,11 +1477,12 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
if (tk == VSH_TK_ERROR)
goto syntaxError;
if (tk != VSH_TK_ARG) {
- vshError(ctl,
- _("expected syntax: --%s <%s>"),
- opt->name,
- opt->type ==
- VSH_OT_INT ? _("number") :
_("string"));
+ if (!partial)
+ vshError(ctl,
+ _("expected syntax: --%s <%s>"),
+ opt->name,
+ opt->type ==
+ VSH_OT_INT ? _("number") :
_("string"));
goto syntaxError;
}
if (opt->type != VSH_OT_ARGV)
@@ -1486,8 +1490,9 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
} else {
tkdata = NULL;
if (optstr) {
- vshError(ctl, _("invalid '=' after option
--%s"),
- opt->name);
+ if (!partial)
+ vshError(ctl, _("invalid '=' after option
--%s"),
+ opt->name);
VIR_FREE(optstr);
goto syntaxError;
}
@@ -1503,7 +1508,8 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
if (!(opt = vshCmddefGetData(cmd, &opts_need_arg,
&opts_seen)) &&
STRNEQ(cmd->name, "help")) {
- vshError(ctl, _("unexpected data '%s'"), tkdata);
+ if (!partial)
+ vshError(ctl, _("unexpected data '%s'"),
tkdata);
goto syntaxError;
}
}
@@ -1559,12 +1565,15 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
c->def = cmd;
c->next = NULL;
- if (vshCommandCheckOpts(ctl, c, opts_required, opts_seen) < 0) {
+ if (!partial &&
+ vshCommandCheckOpts(ctl, c, opts_required, opts_seen) < 0) {
VIR_FREE(c);
goto syntaxError;
}
- if (!ctl->cmd)
+ if (partial)
+ *partial = c;
+ else if (!ctl->cmd)
ctl->cmd = c;
if (clast)
clast->next = c;
@@ -1578,12 +1587,20 @@ vshCommandParse(vshControl *ctl, vshCommandParser *parser)
return true;
syntaxError:
- if (ctl->cmd) {
- vshCommandFree(ctl->cmd);
- ctl->cmd = NULL;
+ if (partial) {
+ if (!*partial)
+ *partial = vshMalloc(ctl, sizeof(vshCmd));
+
+ (*partial)->opts = first;
+ (*partial)->def = cmd;
+ } else {
+ if (ctl->cmd) {
+ vshCommandFree(ctl->cmd);
+ ctl->cmd = NULL;
+ }
+ if (first)
+ vshCommandOptFree(first);
}
- if (first)
- vshCommandOptFree(first);
VIR_FREE(tkdata);
return false;
}
@@ -1618,7 +1635,7 @@ vshCommandArgvParse(vshControl *ctl, int nargs, char **argv)
parser.arg_pos = argv;
parser.arg_end = argv + nargs;
parser.getNextArg = vshCommandArgvGetArg;
- return vshCommandParse(ctl, &parser);
+ return vshCommandParse(ctl, &parser, NULL);
}
/* ----------------------
@@ -1690,7 +1707,7 @@ vshCommandStringGetArg(vshControl *ctl, vshCommandParser *parser,
char **res,
}
bool
-vshCommandStringParse(vshControl *ctl, char *cmdstr)
+vshCommandStringParse(vshControl *ctl, char *cmdstr, vshCmd **partial)
{
vshCommandParser parser;
@@ -1699,7 +1716,7 @@ vshCommandStringParse(vshControl *ctl, char *cmdstr)
parser.pos = cmdstr;
parser.getNextArg = vshCommandStringGetArg;
- return vshCommandParse(ctl, &parser);
+ return vshCommandParse(ctl, &parser, partial);
}
/**
diff --git a/tools/vsh.h b/tools/vsh.h
index ab755bccf..8f7df9ff8 100644
--- a/tools/vsh.h
+++ b/tools/vsh.h
@@ -299,7 +299,7 @@ int vshBlockJobOptionBandwidth(vshControl *ctl,
unsigned long *bandwidth);
bool vshCommandOptBool(const vshCmd *cmd, const char *name);
bool vshCommandRun(vshControl *ctl, const vshCmd *cmd);
-bool vshCommandStringParse(vshControl *ctl, char *cmdstr);
+bool vshCommandStringParse(vshControl *ctl, char *cmdstr, vshCmd **partial);
const vshCmdOpt *vshCommandOptArgv(vshControl *ctl, const vshCmd *cmd,
const vshCmdOpt *opt);
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 03/12] vshReadlineParse: Escape returned results if needed
When returning a string that needs escaping there are two
scenarios that can happen. Firstly, user already started the
string with a quote (or double quote) in which case we don't need
to do anything - readline takes care of that. However, if they
haven't typed anything yet, we need to escape the string
ourselves.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/tools/vsh.c b/tools/vsh.c
index 2a83dc475..3a9941017 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -2874,7 +2874,15 @@ vshReadlineParse(const char *text, int state)
}
}
- if (!res) {
+ if (res) {
+ if (!rl_completion_quote_character) {
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+ virBufferEscapeShell(&buf, res);
+ VIR_FREE(res);
+ if (!(res = virBufferContentAndReset(&buf)))
+ goto error;
+ }
+ } else {
VIR_FREE(sanitized_text);
VIR_FREE(ctext);
}
@@ -2900,6 +2908,16 @@ vshReadlineCompletion(const char *text,
return matches;
}
+
+static int
+vshReadlineCharIsQuoted(char *line, int index)
+{
+ return index > 0 &&
+ line[index - 1] == '\\' &&
+ !vshReadlineCharIsQuoted(line, index - 1);
+}
+
+
# define HISTSIZE_MAX 500000
static int
@@ -2924,6 +2942,8 @@ vshReadlineInit(vshControl *ctl)
rl_attempted_completion_function = vshReadlineCompletion;
rl_basic_word_break_characters = " \t\n\\`@$><=;|&{(";
+ rl_completer_quote_characters = "\"'";
+ rl_char_is_quoted_p = vshReadlineCharIsQuoted;
if (virAsprintf(&histsize_env, "%s_HISTSIZE", ctl->env_prefix) <
0)
goto cleanup;
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 04/12] vshCommandOpt: Allow caller avoiding assert()
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 7 ++++---
tools/vsh.h | 3 ++-
2 files changed, 6 insertions(+), 4 deletions(-)
diff --git a/tools/vsh.c b/tools/vsh.c
index 3a9941017..26f1f9e03 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -816,8 +816,8 @@ vshCommandFree(vshCmd *cmd)
* to the option if found, 0 with *OPT set to NULL if the name is
* valid and the option is not required, -1 with *OPT set to NULL if
* the option is required but not present, and assert if NAME is not
- * valid (which indicates a programming error). No error messages are
- * issued if a value is returned.
+ * valid (which indicates a programming error) unless cmd->skipChecks
+ * is set. No error messages are issued if a value is returned.
*/
static int
vshCommandOpt(const vshCmd *cmd, const char *name, vshCmdOpt **opt,
@@ -830,7 +830,8 @@ vshCommandOpt(const vshCmd *cmd, const char *name, vshCmdOpt **opt,
/* See if option is valid and/or required. */
*opt = NULL;
while (valid) {
- assert(valid->name);
+ if (!cmd->skipChecks)
+ assert(valid->name);
if (STREQ(name, valid->name))
break;
valid++;
diff --git a/tools/vsh.h b/tools/vsh.h
index 8f7df9ff8..112b1b57d 100644
--- a/tools/vsh.h
+++ b/tools/vsh.h
@@ -188,7 +188,8 @@ struct _vshCmdDef {
struct _vshCmd {
const vshCmdDef *def; /* command definition */
vshCmdOpt *opts; /* list of command arguments */
- vshCmd *next; /* next command */
+ vshCmd *next; /* next command */
+ bool skipChecks; /* skip validity checks when retrieving opts */
};
/*
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 05/12] vsh: Fix vshCompleter signature
The first argument passed to this function is vshControl *.
There's no need to use void pointer.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 2 +-
tools/vsh.h | 3 ++-
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/tools/vsh.c b/tools/vsh.c
index 26f1f9e03..bad2c0bcf 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -66,7 +66,7 @@
#ifdef WITH_READLINE
/* For autocompletion */
-void *autoCompleteOpaque;
+vshControl *autoCompleteOpaque;
#endif
/* NOTE: It would be much nicer to have these two as part of vshControl
diff --git a/tools/vsh.h b/tools/vsh.h
index 112b1b57d..51f8ef213 100644
--- a/tools/vsh.h
+++ b/tools/vsh.h
@@ -123,7 +123,8 @@ typedef struct _vshCmdOpt vshCmdOpt;
typedef struct _vshCmdOptDef vshCmdOptDef;
typedef struct _vshControl vshControl;
-typedef char **(*vshCompleter)(void *opaque, unsigned int flags);
+typedef char **(*vshCompleter)(vshControl *ctl,
+ unsigned int flags);
/*
* vshCmdInfo -- name/value pair for information about command
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 06/12] vsh: Call vshCmdOptDef.completer properly
The idea is that .completer for vshCmdOptDef would be called if
the last token on the input is a cmd opt. For instance:
virsh # start --domain<TAB><TAB>
However, with current code that's not happening.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 48 ++++++++++++++++++++++++++++--------------------
1 file changed, 28 insertions(+), 20 deletions(-)
diff --git a/tools/vsh.c b/tools/vsh.c
index bad2c0bcf..3ed6bb916 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -2691,7 +2691,7 @@ vshReadlineParse(const char *text, int state)
uint64_t opts_seen;
size_t opt_index;
static bool cmd_exists, opts_filled, opt_exists;
- static bool non_bool_opt_exists, data_complete;
+ static bool non_bool_opt_exists, complete_data, complete_opts;
if (!state) {
parser.pos = rl_line_buffer;
@@ -2738,7 +2738,7 @@ vshReadlineParse(const char *text, int state)
cmd_exists = false;
opts_filled = false;
non_bool_opt_exists = false;
- data_complete = false;
+ complete_data = false;
const_opts_need_arg = 0;
const_opts_required = 0;
@@ -2804,7 +2804,7 @@ vshReadlineParse(const char *text, int state)
}
if (STREQ(tkdata, sanitized_text)) {
/* auto-complete non-bool option arg */
- data_complete = true;
+ complete_data = true;
break;
}
non_bool_opt_exists = false;
@@ -2851,27 +2851,36 @@ vshReadlineParse(const char *text, int state)
virSkipSpaces((const char**)&tkdata);
}
VIR_FREE(const_tkdata);
+ complete_opts = opts_filled && !non_bool_opt_exists;
}
if (!cmd_exists) {
res = vshReadlineCommandGenerator(sanitized_text, state);
- } else if (opts_filled && !non_bool_opt_exists) {
- res = vshReadlineOptionsGenerator(sanitized_text, state, cmd);
- } else if (non_bool_opt_exists && data_complete && opt &&
opt->completer) {
- if (!completed_list)
- completed_list = opt->completer(autoCompleteOpaque,
- opt->completer_flags);
- if (completed_list) {
- while ((completed_name = completed_list[completed_list_index])) {
- completed_list_index++;
- if (!STRPREFIX(completed_name, sanitized_text))
- continue;
- res = vshStrdup(NULL, completed_name);
- return res;
+ } else {
+ if (complete_opts) {
+ res = vshReadlineOptionsGenerator(sanitized_text, state, cmd);
+ complete_opts = !!res;
+ }
+
+ if (!complete_opts && complete_data) {
+ if (!completed_list && opt && opt->completer)
+ completed_list = opt->completer(autoCompleteOpaque,
+ opt->completer_flags);
+ if (completed_list) {
+ while ((completed_name = completed_list[completed_list_index])) {
+ completed_list_index++;
+ if (!STRPREFIX(completed_name, sanitized_text))
+ continue;
+ res = vshStrdup(NULL, completed_name);
+ break;
+ }
+
+ if (!res) {
+ virStringListFree(completed_list);
+ completed_list = NULL;
+ completed_list_index = 0;
+ }
}
- res = NULL;
- virStringListFree(completed_list);
- completed_list_index = 0;
}
}
@@ -2895,7 +2904,6 @@ vshReadlineParse(const char *text, int state)
VIR_FREE(sanitized_text);
VIR_FREE(ctext);
return NULL;
-
}
static char **
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 07/12] vshCompleter: Pass partially parsed command
The callback we're calling might need to make decisions on
already passed arguments. For instance, a completer that is
supposed to bring up list of domain's interfaces might want to
see what domain user wants to work with.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/vsh.c | 9 ++++++++-
tools/vsh.h | 1 +
2 files changed, 9 insertions(+), 1 deletion(-)
diff --git a/tools/vsh.c b/tools/vsh.c
index 3ed6bb916..9cf85b180 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -2863,9 +2863,16 @@ vshReadlineParse(const char *text, int state)
}
if (!complete_opts && complete_data) {
- if (!completed_list && opt && opt->completer)
+ if (!completed_list && opt && opt->completer) {
+ vshCmd *partial = NULL;
+ vshCommandStringParse(autoCompleteOpaque, rl_line_buffer, &partial);
+ if (partial)
+ partial->skipChecks = true;
completed_list = opt->completer(autoCompleteOpaque,
+ partial,
opt->completer_flags);
+ vshCommandFree(partial);
+ }
if (completed_list) {
while ((completed_name = completed_list[completed_list_index])) {
completed_list_index++;
diff --git a/tools/vsh.h b/tools/vsh.h
index 51f8ef213..ae40fb4e8 100644
--- a/tools/vsh.h
+++ b/tools/vsh.h
@@ -124,6 +124,7 @@ typedef struct _vshCmdOptDef vshCmdOptDef;
typedef struct _vshControl vshControl;
typedef char **(*vshCompleter)(vshControl *ctl,
+ const vshCmd *cmd,
unsigned int flags);
/*
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 08/12] vsh: Introduce complete command
This command is going to be called from bash completion script in
the following form:
virsh complete "start --domain"
Its only purpose is to return list of possible strings for
completion. Note that this is a 'hidden', unlisted command and
therefore there's no documentation to it.
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/virsh.c | 1 +
tools/virt-admin.c | 1 +
tools/vsh.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++++++
tools/vsh.h | 14 ++++++++++
4 files changed, 94 insertions(+)
diff --git a/tools/virsh.c b/tools/virsh.c
index d0c135016..0d44eb301 100644
--- a/tools/virsh.c
+++ b/tools/virsh.c
@@ -831,6 +831,7 @@ static const vshCmdDef virshCmds[] = {
VSH_CMD_PWD,
VSH_CMD_QUIT,
VSH_CMD_SELF_TEST,
+ VSH_CMD_COMPLETE,
{.name = "connect",
.handler = cmdConnect,
.opts = opts_connect,
diff --git a/tools/virt-admin.c b/tools/virt-admin.c
index b8b33af19..ef5bada63 100644
--- a/tools/virt-admin.c
+++ b/tools/virt-admin.c
@@ -1351,6 +1351,7 @@ static const vshCmdDef vshAdmCmds[] = {
VSH_CMD_PWD,
VSH_CMD_QUIT,
VSH_CMD_SELF_TEST,
+ VSH_CMD_COMPLETE,
{.name = "uri",
.handler = cmdURI,
.opts = NULL,
diff --git a/tools/vsh.c b/tools/vsh.c
index 9cf85b180..2f0914c59 100644
--- a/tools/vsh.c
+++ b/tools/vsh.c
@@ -3446,3 +3446,81 @@ cmdSelfTest(vshControl *ctl ATTRIBUTE_UNUSED,
return true;
}
+
+/* ----------------------
+ * Autocompletion command
+ * ---------------------- */
+
+const vshCmdOptDef opts_complete[] = {
+ {.name = "string",
+ .type = VSH_OT_ARGV,
+ .flags = VSH_OFLAG_EMPTY_OK,
+ .help = N_("partial string to autocomplete")
+ },
+ {.name = NULL}
+};
+
+const vshCmdInfo info_complete[] = {
+ {.name = "help",
+ .data = N_("internal command for autocompletion")
+ },
+ {.name = "desc",
+ .data = N_("internal use only")
+ },
+ {.name = NULL}
+};
+
+bool
+cmdComplete(vshControl *ctl, const vshCmd *cmd)
+{
+ bool ret = false;
+#ifdef WITH_READLINE
+ const vshClientHooks *hooks = ctl->hooks;
+ int stdin_fileno = STDIN_FILENO;
+ const char *arg = "";
+ const vshCmdOpt *opt = NULL;
+ char **matches = NULL, *tmp = NULL, **iter;
+ virBuffer buf = VIR_BUFFER_INITIALIZER;
+
+ if (vshCommandOptStringQuiet(ctl, cmd, "string", &arg) <= 0)
+ goto cleanup;
+
+ /* This command is flagged VSH_CMD_FLAG_NOCONNECT because we
+ * need to prevent auth hooks reading any input. Therefore we
+ * have to close stdin and then connect ourselves. */
+ VIR_FORCE_CLOSE(stdin_fileno);
+
+ if (!(hooks && hooks->connHandler && hooks->connHandler(ctl)))
+ goto cleanup;
+
+ while ((opt = vshCommandOptArgv(ctl, cmd, opt))) {
+ if (virBufferUse(&buf) != 0)
+ virBufferAddChar(&buf, ' ');
+ virBufferAddStr(&buf, opt->data);
+ arg = opt->data;
+ }
+
+ if (virBufferCheckError(&buf) < 0)
+ goto cleanup;
+
+ vshReadlineInit(ctl);
+
+ if (!(rl_line_buffer = virBufferContentAndReset(&buf)) &&
+ VIR_STRDUP(rl_line_buffer, "") < 0)
+ goto cleanup;
+
+ if (!(matches = vshReadlineCompletion(arg, 0, 0)))
+ goto cleanup;
+
+ for (iter = matches; *iter; iter++)
+ printf("%s\n", *iter);
+
+ ret = true;
+ cleanup:
+ virBufferFreeAndReset(&buf);
+ for (iter = matches; iter && *iter; iter++)
+ VIR_FREE(*iter);
+ VIR_FREE(matches);
+#endif /* WITH_READLINE */
+ return ret;
+}
diff --git a/tools/vsh.h b/tools/vsh.h
index ae40fb4e8..6894700d9 100644
--- a/tools/vsh.h
+++ b/tools/vsh.h
@@ -382,6 +382,8 @@ extern const vshCmdInfo info_echo[];
extern const vshCmdInfo info_pwd[];
extern const vshCmdInfo info_quit[];
extern const vshCmdInfo info_selftest[];
+extern const vshCmdOptDef opts_complete[];
+extern const vshCmdInfo info_complete[];
bool cmdHelp(vshControl *ctl, const vshCmd *cmd);
bool cmdCd(vshControl *ctl, const vshCmd *cmd);
@@ -389,6 +391,7 @@ bool cmdEcho(vshControl *ctl, const vshCmd *cmd);
bool cmdPwd(vshControl *ctl, const vshCmd *cmd);
bool cmdQuit(vshControl *ctl, const vshCmd *cmd);
bool cmdSelfTest(vshControl *ctl, const vshCmd *cmd);
+bool cmdComplete(vshControl *ctl, const vshCmd *cmd);
# define VSH_CMD_CD \
{ \
@@ -454,6 +457,17 @@ bool cmdSelfTest(vshControl *ctl, const vshCmd *cmd);
.alias = "self-test" \
}
+# define VSH_CMD_COMPLETE \
+ { \
+ .name = "complete", \
+ .handler = cmdComplete, \
+ .opts = opts_complete, \
+ .info = info_complete, \
+ .flags = VSH_CMD_FLAG_NOCONNECT | VSH_CMD_FLAG_ALIAS, \
+ .alias = "complete" \
+ }
+
+
/* readline */
char * vshReadline(vshControl *ctl, const char *prompt);
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 09/12] tools: Provide bash autompletion file
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
configure.ac | 3 ++
libvirt.spec.in | 2 ++
m4/virt-bash-completion.m4 | 74 ++++++++++++++++++++++++++++++++++++++++++++++
tools/Makefile.am | 22 ++++++++++++--
tools/bash-completion/vsh | 67 +++++++++++++++++++++++++++++++++++++++++
5 files changed, 166 insertions(+), 2 deletions(-)
create mode 100644 m4/virt-bash-completion.m4
create mode 100644 tools/bash-completion/vsh
diff --git a/configure.ac b/configure.ac
index b2d991c3b..9103612bb 100644
--- a/configure.ac
+++ b/configure.ac
@@ -242,6 +242,7 @@ LIBVIRT_ARG_APPARMOR
LIBVIRT_ARG_ATTR
LIBVIRT_ARG_AUDIT
LIBVIRT_ARG_AVAHI
+LIBVIRT_ARG_BASH_COMPLETION
LIBVIRT_ARG_BLKID
LIBVIRT_ARG_CAPNG
LIBVIRT_ARG_CURL
@@ -278,6 +279,7 @@ LIBVIRT_CHECK_ATOMIC
LIBVIRT_CHECK_ATTR
LIBVIRT_CHECK_AUDIT
LIBVIRT_CHECK_AVAHI
+LIBVIRT_CHECK_BASH_COMPLETION
LIBVIRT_CHECK_BLKID
LIBVIRT_CHECK_CAPNG
LIBVIRT_CHECK_CURL
@@ -976,6 +978,7 @@ LIBVIRT_RESULT_APPARMOR
LIBVIRT_RESULT_ATTR
LIBVIRT_RESULT_AUDIT
LIBVIRT_RESULT_AVAHI
+LIBVIRT_RESULT_BASH_COMPLETION
LIBVIRT_RESULT_BLKID
LIBVIRT_RESULT_CAPNG
LIBVIRT_RESULT_CURL
diff --git a/libvirt.spec.in b/libvirt.spec.in
index b00689cab..67bbd128c 100644
--- a/libvirt.spec.in
+++ b/libvirt.spec.in
@@ -2043,6 +2043,8 @@ exit 0
%{_datadir}/systemtap/tapset/libvirt_qemu_probes*.stp
%{_datadir}/systemtap/tapset/libvirt_functions.stp
+%{_datadir}/bash-completion/completions/vsh
+
%if %{with_systemd}
%{_unitdir}/libvirt-guests.service
diff --git a/m4/virt-bash-completion.m4 b/m4/virt-bash-completion.m4
new file mode 100644
index 000000000..e1ef58740
--- /dev/null
+++ b/m4/virt-bash-completion.m4
@@ -0,0 +1,74 @@
+dnl Bash completion support
+dnl
+dnl Copyright (C) 2017 Red Hat, Inc.
+dnl
+dnl This library is free software; you can redistribute it and/or
+dnl modify it under the terms of the GNU Lesser General Public
+dnl License as published by the Free Software Foundation; either
+dnl version 2.1 of the License, or (at your option) any later version.
+dnl
+dnl This library is distributed in the hope that it will be useful,
+dnl but WITHOUT ANY WARRANTY; without even the implied warranty of
+dnl MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+dnl Lesser General Public License for more details.
+dnl
+dnl You should have received a copy of the GNU Lesser General Public
+dnl License along with this library. If not, see
+dnl <http://www.gnu.org/licenses/>;.
+dnl
+dnl Inspired by libguestfs code.
+dnl
+
+AC_DEFUN([LIBVIRT_ARG_BASH_COMPLETION],[
+ LIBVIRT_ARG_WITH_FEATURE([BASH_COMPLETION], [bash-completion], [check], [2.0])
+ LIBVIRT_ARG_WITH([BASH_COMPLETIONS_DIR],
+ [directory containing bash completions scripts],
+ [check])
+])
+
+AC_DEFUN([LIBVIRT_CHECK_BASH_COMPLETION], [
+ AC_REQUIRE([LIBVIRT_CHECK_READLINE])
+
+ if test "x$with_readline" != "xyes" ; then
+ if test "x$with_bash_completion" != "xyes" ; then
+ with_bash_completion=no
+ else
+ AC_MSG_ERROR([readline is required for bash completion support])
+ fi
+ else
+ if test "x$with_bash_completion" = "xcheck" ; then
+ with_bash_completion=yes
+ fi
+ fi
+
+ LIBVIRT_CHECK_PKG([BASH_COMPLETION], [bash-completion], [2.0])
+
+ if test "x$with_bash_completion" = "xyes" ; then
+ if test "x$with_bash_completions_dir" = "xcheck"; then
+ AC_MSG_CHECKING([for bash-completions directory])
+ BASH_COMPLETIONS_DIR="$($PKG_CONFIG --variable=completionsdir
bash-completion)"
+ AC_MSG_RESULT([$BASH_COMPLETIONS_DIR])
+
+ dnl Replace bash completions's exec_prefix with our own.
+ dnl Note that ${exec_prefix} is kept verbatim at this point in time,
+ dnl and will only be expanded later, when make is called: this makes
+ dnl it possible to override such prefix at compilation or installation
+ dnl time
+ bash_completions_prefix="$($PKG_CONFIG --variable=prefix
bash-completion)"
+ if test "x$bash_completions_prefix" = "x" ; then
+ bash_completions_prefix="/usr"
+ fi
+
+
BASH_COMPLETIONS_DIR='${exec_prefix}'"${BASH_COMPLETIONS_DIR#$bash_completions_prefix}"
+ elif test "x$with_bash_completions_dir" = "xno" || test
"x$with_bash_completions_dir" = "xyes"; then
+ AC_MSG_ERROR([bash-completions-dir must be used only with valid path])
+ else
+ BASH_COMPLETIONS_DIR=$with_bash_completions_dir
+ fi
+ AC_SUBST([BASH_COMPLETIONS_DIR])
+ fi
+])
+
+AC_DEFUN([LIBVIRT_RESULT_BASH_COMPLETION],[
+ LIBVIRT_RESULT_LIB([BASH_COMPLETION])
+])
diff --git a/tools/Makefile.am b/tools/Makefile.am
index 7513a73ac..34a81e69c 100644
--- a/tools/Makefile.am
+++ b/tools/Makefile.am
@@ -66,6 +66,7 @@ EXTRA_DIST = \
libvirt-guests.sysconf \
virt-login-shell.conf \
virsh-edit.c \
+ bash-completion/vsh \
$(PODFILES) \
$(MANINFILES) \
$(NULL)
@@ -332,9 +333,11 @@ POD2MAN = pod2man -c "Virtualization Support" -r
"$(PACKAGE)-$(VERSION)"
< $< > $@-t && \
mv $@-t $@
-install-data-local: install-init install-systemd install-nss
+install-data-local: install-init install-systemd install-nss \
+ install-bash-completion
-uninstall-local: uninstall-init uninstall-systemd uninstall-nss
+uninstall-local: uninstall-init uninstall-systemd uninstall-nss \
+ uninstall-bash-completion
install-sysconfig:
$(MKDIR_P) $(DESTDIR)$(sysconfdir)/sysconfig
@@ -420,6 +423,21 @@ libvirt-guests.service: libvirt-guests.service.in
$(top_builddir)/config.status
mv $@-t $@
+if WITH_BASH_COMPLETION
+install-bash-completion:
+ $(MKDIR_P) "$(DESTDIR)$(BASH_COMPLETIONS_DIR)"
+ $(INSTALL_SCRIPT) $(srcdir)/bash-completion/vsh \
+ "$(DESTDIR)$(BASH_COMPLETIONS_DIR)/vsh"
+
+uninstall-bash-completion:
+ rm -f $(DESTDIR)$(BASH_COMPLETIONS_DIR)/vsh
+ rmdir $(DESTDIR)$(BASH_COMPLETIONS_DIR) ||:
+else ! WITH_BASH_COMPLETION
+install-bash-completion:
+uninstall-bash-completion:
+endif ! WITH_BASH_COMPLETION
+
+
EXTRA_DIST += \
wireshark/util/genxdrstub.pl \
wireshark/util/make-dissector-reg
diff --git a/tools/bash-completion/vsh b/tools/bash-completion/vsh
new file mode 100644
index 000000000..8493cad28
--- /dev/null
+++ b/tools/bash-completion/vsh
@@ -0,0 +1,67 @@
+#
+# virsh & virt-admin completion command
+#
+
+_vsh_complete()
+{
+ local words cword c=0 i=0 cur RO URI CMDLINE INPUT A
+
+ # Here, $COMP_WORDS is an array of words on the bash
+ # command line that user wants to complete. However, when
+ # parsing command line, the default set of word breaks is
+ # applied. This doesn't work for us as it mangles libvirt
+ # arguments, e.g. connection URI (with the default set it's
+ # split into multiple items within the array). Fortunately,
+ # there's a fixup function for the array.
+ _get_comp_words_by_ref -n "\"'><=;|&(:" -w words -i
cword
+ COMP_WORDS=( "${words[@]}" )
+ COMP_CWORD=${cword}
+ cur=${COMP_WORDS[$COMP_CWORD]}
+
+ # See what URI is user trying to connect to and if they are
+ # connecting RO. Honour that.
+ while [ $c -le $COMP_CWORD ]; do
+ word="${COMP_WORDS[c]}"
+ case "$word" in
+ -r|--readonly) RO=1 ;;
+ -c|--connect) c=$((++c)); URI=${COMP_WORDS[c]} ;;
+ *) if [ $c -ne 0 ] && [ $i -eq 0 ]; then i=$c; break; fi ;;
+ esac
+ c=$((++c))
+ done
+
+ CMDLINE=
+ if [ -n "${RO}" ]; then
+ CMDLINE="${CMDLINE} -r"
+ fi
+ if [ -n "${URI}" ]; then
+ CMDLINE="${CMDLINE} -c ${URI}"
+ fi
+
+ INPUT=( "${COMP_WORDS[@]:$i:$COMP_CWORD}" )
+
+ # Uncomment these lines for easy debug.
+# echo;
+# echo "RO=${flag_ro}";
+# echo "URI=${URI}";
+# echo "CMDLINE=${CMDLINE}";
+# echo "INPUT[${#INPUT[@]}]=**${INPUT[@]}**";
+# echo "cur=${cur}";
+# echo;
+# return 0;
+
+ # Small shortcut here. According to manpage:
+ # When the function is executed, the first argument ($1) is
+ # the name of the command whose arguments are being
+ # completed.
+ # Therefore, we might just run $1.
+ A=($($1 ${CMDLINE} complete -- "${INPUT[@]}" 2>/dev/null))
+
+ COMPREPLY=($(compgen -W "${A[*]%--}" -- ${cur}))
+ __ltrim_colon_completions "$cur"
+ return 0
+} &&
+complete -o default -o filenames -F _vsh_complete virsh &&
+complete -o default -o filenames -F _vsh_complete virt-admin
+
+# vim: ft=sh:et:ts=4:sw=4:tw=80
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 10/12] virsh: Introduce virshDomainNameCompleter
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/Makefile.am | 9 +++
tools/virsh-completer.c | 90 +++++++++++++++++++++
tools/virsh-completer.h | 33 ++++++++
tools/virsh-domain-monitor.c | 30 +++----
tools/virsh-domain.c | 182 ++++++++++++++++++++++---------------------
tools/virsh-snapshot.c | 24 +++---
tools/virsh.h | 7 +-
7 files changed, 256 insertions(+), 119 deletions(-)
create mode 100644 tools/virsh-completer.c
create mode 100644 tools/virsh-completer.h
diff --git a/tools/Makefile.am b/tools/Makefile.am
index 34a81e69c..8eddc7bbe 100644
--- a/tools/Makefile.am
+++ b/tools/Makefile.am
@@ -231,6 +231,15 @@ virsh_SOURCES = \
virsh-volume.c virsh-volume.h \
$(NULL)
+VIRSH_COMPLETER = \
+ virsh-completer.c virsh-completer.h
+
+if WITH_READLINE
+virsh_SOURCES += $(VIRSH_COMPLETER)
+else ! WITH_READLINE
+EXTRA_DIST += $(VIRSH_COMPLETER)
+endif ! WITH_READLINE
+
virsh_LDFLAGS = \
$(AM_LDFLAGS) \
$(PIE_LDFLAGS) \
diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c
new file mode 100644
index 000000000..4e32b882b
--- /dev/null
+++ b/tools/virsh-completer.c
@@ -0,0 +1,90 @@
+/*
+ * virsh-completer.c: virsh completer callbacks
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library. If not, see
+ * <http://www.gnu.org/licenses/>;.
+ *
+ * Michal Privoznik <mprivozn(a)redhat.com>
+ *
+ */
+
+#include <config.h>
+
+#include "virsh-completer.h"
+#include "virsh.h"
+#include "virsh-util.h"
+#include "internal.h"
+#include "viralloc.h"
+#include "virstring.h"
+
+
+char **
+virshDomainNameCompleter(vshControl *ctl,
+ const vshCmd *cmd ATTRIBUTE_UNUSED,
+ unsigned int flags)
+{
+ virshControlPtr priv = ctl->privData;
+ virDomainPtr *domains = NULL;
+ int ndomains = 0;
+ size_t i = 0;
+ char **ret = NULL;
+
+ virCheckFlags(VIR_CONNECT_LIST_DOMAINS_ACTIVE |
+ VIR_CONNECT_LIST_DOMAINS_INACTIVE |
+ VIR_CONNECT_LIST_DOMAINS_PERSISTENT |
+ VIR_CONNECT_LIST_DOMAINS_TRANSIENT |
+ VIR_CONNECT_LIST_DOMAINS_RUNNING |
+ VIR_CONNECT_LIST_DOMAINS_PAUSED |
+ VIR_CONNECT_LIST_DOMAINS_SHUTOFF |
+ VIR_CONNECT_LIST_DOMAINS_OTHER |
+ VIR_CONNECT_LIST_DOMAINS_MANAGEDSAVE |
+ VIR_CONNECT_LIST_DOMAINS_NO_MANAGEDSAVE |
+ VIR_CONNECT_LIST_DOMAINS_AUTOSTART |
+ VIR_CONNECT_LIST_DOMAINS_NO_AUTOSTART |
+ VIR_CONNECT_LIST_DOMAINS_HAS_SNAPSHOT |
+ VIR_CONNECT_LIST_DOMAINS_NO_SNAPSHOT,
+ NULL);
+
+ if (!priv->conn || virConnectIsAlive(priv->conn) <= 0)
+ return NULL;
+
+ if ((ndomains = virConnectListAllDomains(priv->conn, &domains, flags)) <
0)
+ return NULL;
+
+ if (VIR_ALLOC_N(ret, ndomains + 1) < 0)
+ goto error;
+
+ for (i = 0; i < ndomains; i++) {
+ const char *name = virDomainGetName(domains[i]);
+
+ if (VIR_STRDUP(ret[i], name) < 0)
+ goto error;
+
+ virshDomainFree(domains[i]);
+ }
+ VIR_FREE(domains);
+
+ return ret;
+ error:
+
+ for (; i < ndomains; i++)
+ virshDomainFree(domains[i]);
+ VIR_FREE(domains);
+ for (i = 0; i < ndomains; i++)
+ VIR_FREE(ret[i]);
+ VIR_FREE(ret);
+ return NULL;
+}
diff --git a/tools/virsh-completer.h b/tools/virsh-completer.h
new file mode 100644
index 000000000..288e17909
--- /dev/null
+++ b/tools/virsh-completer.h
@@ -0,0 +1,33 @@
+/*
+ * virsh-completer.h: virsh completer callbacks
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library. If not, see
+ * <http://www.gnu.org/licenses/>;.
+ *
+ * Michal Privoznik <mprivozn(a)redhat.com>
+ *
+ */
+
+#ifndef VIRSH_COMPLETER
+# define VIRSH_COMPLETER
+
+# include "vsh.h"
+
+char ** virshDomainNameCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags);
+
+#endif
diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c
index b3bfc33c8..d0edb177d 100644
--- a/tools/virsh-domain-monitor.c
+++ b/tools/virsh-domain-monitor.c
@@ -40,8 +40,8 @@
#include "virxml.h"
#include "virstring.h"
-#define VIRSH_COMMON_OPT_DOMAIN_FULL \
- VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"))
+#define VIRSH_COMMON_OPT_DOMAIN_FULL(cflags) \
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"), cflags)
VIR_ENUM_DECL(virshDomainIOError)
VIR_ENUM_IMPL(virshDomainIOError,
@@ -278,7 +278,7 @@ static const vshCmdInfo info_dommemstat[] = {
};
static const vshCmdOptDef opts_dommemstat[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "period",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ_OPT,
@@ -390,7 +390,7 @@ static const vshCmdInfo info_domblkinfo[] = {
};
static const vshCmdOptDef opts_domblkinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "device",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -460,7 +460,7 @@ static const vshCmdInfo info_domblklist[] = {
};
static const vshCmdOptDef opts_domblklist[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "inactive",
.type = VSH_OT_BOOL,
.help = N_("get inactive rather than running configuration")
@@ -566,7 +566,7 @@ static const vshCmdInfo info_domiflist[] = {
};
static const vshCmdOptDef opts_domiflist[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "inactive",
.type = VSH_OT_BOOL,
.help = N_("get inactive rather than running configuration")
@@ -655,7 +655,7 @@ static const vshCmdInfo info_domif_getlink[] = {
};
static const vshCmdOptDef opts_domif_getlink[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -752,7 +752,7 @@ static const vshCmdInfo info_domcontrol[] = {
};
static const vshCmdOptDef opts_domcontrol[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -805,7 +805,7 @@ static const vshCmdInfo info_domblkstat[] = {
};
static const vshCmdOptDef opts_domblkstat[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "device",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_EMPTY_OK,
@@ -991,7 +991,7 @@ static const vshCmdInfo info_domifstat[] = {
};
static const vshCmdOptDef opts_domifstat[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -1064,7 +1064,7 @@ static const vshCmdInfo info_domblkerror[] = {
};
static const vshCmdOptDef opts_domblkerror[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -1125,7 +1125,7 @@ static const vshCmdInfo info_dominfo[] = {
};
static const vshCmdOptDef opts_dominfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = NULL}
};
@@ -1264,7 +1264,7 @@ static const vshCmdInfo info_domstate[] = {
};
static const vshCmdOptDef opts_domstate[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "reason",
.type = VSH_OT_BOOL,
.help = N_("also print reason for the state")
@@ -1316,7 +1316,7 @@ static const vshCmdInfo info_domtime[] = {
};
static const vshCmdOptDef opts_domtime[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "now",
.type = VSH_OT_BOOL,
.help = N_("set to the time of the host running virsh")
@@ -2145,7 +2145,7 @@ static const vshCmdInfo info_domifaddr[] = {
};
static const vshCmdOptDef opts_domifaddr[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "interface",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_NONE,
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index 42d552637..b579e8b16 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -65,8 +65,8 @@
# define SA_SIGINFO 0
#endif
-#define VIRSH_COMMON_OPT_DOMAIN_FULL \
- VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"))
+#define VIRSH_COMMON_OPT_DOMAIN_FULL(cflags) \
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"), cflags)
#define VIRSH_COMMON_OPT_DOMAIN_PERSISTENT \
{.name = "persistent", \
@@ -154,7 +154,7 @@ static const vshCmdInfo info_attach_device[] = {
};
static const vshCmdOptDef opts_attach_device[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
VIRSH_COMMON_OPT_FILE(N_("XML file")),
VIRSH_COMMON_OPT_DOMAIN_PERSISTENT,
VIRSH_COMMON_OPT_DOMAIN_CONFIG,
@@ -236,7 +236,7 @@ static const vshCmdInfo info_attach_disk[] = {
};
static const vshCmdOptDef opts_attach_disk[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "source",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ | VSH_OFLAG_EMPTY_OK,
@@ -727,7 +727,7 @@ static const vshCmdInfo info_attach_interface[] = {
};
static const vshCmdOptDef opts_attach_interface[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "type",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -1037,7 +1037,7 @@ static const vshCmdInfo info_autostart[] = {
};
static const vshCmdOptDef opts_autostart[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "disable",
.type = VSH_OT_BOOL,
.help = N_("disable autostarting")
@@ -1089,7 +1089,7 @@ static const vshCmdInfo info_blkdeviotune[] = {
};
static const vshCmdOptDef opts_blkdeviotune[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "device",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -1416,7 +1416,7 @@ static const vshCmdInfo info_blkiotune[] = {
};
static const vshCmdOptDef opts_blkiotune[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "weight",
.type = VSH_OT_INT,
.help = N_("IO Weight")
@@ -1885,7 +1885,7 @@ static const vshCmdInfo info_block_commit[] = {
};
static const vshCmdOptDef opts_block_commit[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -2110,7 +2110,7 @@ static const vshCmdInfo info_block_copy[] = {
};
static const vshCmdOptDef opts_block_copy[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -2426,7 +2426,7 @@ static const vshCmdInfo info_block_job[] = {
};
static const vshCmdOptDef opts_block_job[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -2669,7 +2669,7 @@ static const vshCmdInfo info_block_pull[] = {
};
static const vshCmdOptDef opts_block_pull[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -2815,7 +2815,7 @@ static const vshCmdInfo info_block_resize[] = {
};
static const vshCmdOptDef opts_block_resize[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -2879,7 +2879,7 @@ static const vshCmdInfo info_console[] = {
};
static const vshCmdOptDef opts_console[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "devname", /* sc_prohibit_devname */
.type = VSH_OT_STRING,
.help = N_("character device name")
@@ -2973,7 +2973,7 @@ static const vshCmdInfo info_domif_setlink[] = {
};
static const vshCmdOptDef opts_domif_setlink[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -3143,7 +3143,7 @@ static const vshCmdInfo info_domiftune[] = {
};
static const vshCmdOptDef opts_domiftune[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -3340,7 +3340,7 @@ static const vshCmdInfo info_suspend[] = {
};
static const vshCmdOptDef opts_suspend[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_RUNNING),
{.name = NULL}
};
@@ -3382,7 +3382,7 @@ static const vshCmdInfo info_dom_pm_suspend[] = {
};
static const vshCmdOptDef opts_dom_pm_suspend[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_RUNNING),
{.name = "target",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -3460,7 +3460,7 @@ static const vshCmdInfo info_dom_pm_wakeup[] = {
};
static const vshCmdOptDef opts_dom_pm_wakeup[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_OTHER),
{.name = NULL}
};
@@ -3505,7 +3505,7 @@ static const vshCmdInfo info_undefine[] = {
};
static const vshCmdOptDef opts_undefine[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_PERSISTENT),
{.name = "managed-save",
.type = VSH_OT_BOOL,
.help = N_("remove domain managed state file")
@@ -3923,7 +3923,8 @@ static const vshCmdInfo info_start[] = {
};
static const vshCmdOptDef opts_start[] = {
- VIRSH_COMMON_OPT_DOMAIN(N_("name of the inactive domain")),
+ VIRSH_COMMON_OPT_DOMAIN(N_("name of the inactive domain"),
+ VIR_CONNECT_LIST_DOMAINS_SHUTOFF),
#ifndef WIN32
{.name = "console",
.type = VSH_OT_BOOL,
@@ -4098,7 +4099,7 @@ static const vshCmdInfo info_save[] = {
};
static const vshCmdOptDef opts_save[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
VIRSH_COMMON_OPT_FILE(N_("where to save the data")),
{.name = "bypass-cache",
.type = VSH_OT_BOOL,
@@ -4544,7 +4545,7 @@ static const vshCmdInfo info_managedsave[] = {
};
static const vshCmdOptDef opts_managedsave[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "bypass-cache",
.type = VSH_OT_BOOL,
.help = N_("avoid file system cache when saving")
@@ -4663,7 +4664,7 @@ static const vshCmdInfo info_managedsaveremove[] = {
};
static const vshCmdOptDef opts_managedsaveremove[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = NULL}
};
@@ -4718,7 +4719,7 @@ static const vshCmdInfo info_managed_save_edit[] = {
};
static const vshCmdOptDef opts_managed_save_edit[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "running",
.type = VSH_OT_BOOL,
.help = N_("set domain to be running on start")
@@ -4784,7 +4785,7 @@ static const vshCmdInfo info_managed_save_dumpxml[] = {
};
static const vshCmdOptDef opts_managed_save_dumpxml[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "security-info",
.type = VSH_OT_BOOL,
.help = N_("include security sensitive information in XML dump")
@@ -4832,7 +4833,7 @@ static const vshCmdInfo info_managed_save_define[] = {
};
static const vshCmdOptDef opts_managed_save_define[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "xml",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -4904,7 +4905,7 @@ static const vshCmdInfo info_schedinfo[] = {
};
static const vshCmdOptDef opts_schedinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "weight",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ_OPT,
@@ -5215,7 +5216,7 @@ static const vshCmdInfo info_dump[] = {
};
static const vshCmdOptDef opts_dump[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
VIRSH_COMMON_OPT_FILE(N_("where to dump the core")),
VIRSH_COMMON_OPT_LIVE(N_("perform a live core dump if supported")),
{.name = "crash",
@@ -5387,7 +5388,7 @@ static const vshCmdInfo info_screenshot[] = {
};
static const vshCmdOptDef opts_screenshot[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "file",
.type = VSH_OT_STRING,
.help = N_("where to store the screenshot")
@@ -5530,7 +5531,7 @@ static const vshCmdInfo info_setLifecycleAction[] = {
};
static const vshCmdOptDef opts_setLifecycleAction[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "type",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_REQ,
@@ -5626,7 +5627,7 @@ static const vshCmdInfo info_set_user_password[] = {
};
static const vshCmdOptDef opts_set_user_password[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "user",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -5690,7 +5691,7 @@ static const vshCmdInfo info_resume[] = {
};
static const vshCmdOptDef opts_resume[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_PAUSED),
{.name = NULL}
};
@@ -5729,7 +5730,7 @@ static const vshCmdInfo info_shutdown[] = {
};
static const vshCmdOptDef opts_shutdown[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "mode",
.type = VSH_OT_STRING,
.help = N_("shutdown mode: acpi|agent|initctl|signal|paravirt")
@@ -5813,7 +5814,7 @@ static const vshCmdInfo info_reboot[] = {
};
static const vshCmdOptDef opts_reboot[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "mode",
.type = VSH_OT_STRING,
.help = N_("shutdown mode: acpi|agent|initctl|signal|paravirt")
@@ -5892,7 +5893,7 @@ static const vshCmdInfo info_reset[] = {
};
static const vshCmdOptDef opts_reset[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = NULL}
};
@@ -5931,7 +5932,7 @@ static const vshCmdInfo info_domjobinfo[] = {
};
static const vshCmdOptDef opts_domjobinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "completed",
.type = VSH_OT_BOOL,
.help = N_("return statistics of a recently completed job")
@@ -6275,7 +6276,7 @@ static const vshCmdInfo info_domjobabort[] = {
};
static const vshCmdOptDef opts_domjobabort[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -6309,7 +6310,7 @@ static const vshCmdInfo info_vcpucount[] = {
};
static const vshCmdOptDef opts_vcpucount[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "maximum",
.type = VSH_OT_BOOL,
.help = N_("get maximum count of vcpus")
@@ -6506,7 +6507,7 @@ static const vshCmdInfo info_vcpuinfo[] = {
};
static const vshCmdOptDef opts_vcpuinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "pretty",
.type = VSH_OT_BOOL,
.help = N_("return human readable output")
@@ -6755,7 +6756,7 @@ static const vshCmdInfo info_vcpupin[] = {
};
static const vshCmdOptDef opts_vcpupin[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "vcpu",
.type = VSH_OT_INT,
.help = N_("vcpu number")
@@ -6972,7 +6973,7 @@ static const vshCmdInfo info_emulatorpin[] = {
};
static const vshCmdOptDef opts_emulatorpin[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "cpulist",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_EMPTY_OK,
@@ -7076,7 +7077,7 @@ static const vshCmdInfo info_setvcpus[] = {
};
static const vshCmdOptDef opts_setvcpus[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "count",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -7174,7 +7175,7 @@ static const vshCmdInfo info_guestvcpus[] = {
};
static const vshCmdOptDef opts_guestvcpus[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "cpulist",
.type = VSH_OT_STRING,
.help = N_("list of cpus to enable or disable")
@@ -7259,7 +7260,7 @@ static const vshCmdInfo info_setvcpu[] = {
};
static const vshCmdOptDef opts_setvcpu[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "vcpulist",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -7342,7 +7343,7 @@ static const vshCmdInfo info_domblkthreshold[] = {
};
static const vshCmdOptDef opts_domblkthreshold[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "dev",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -7398,7 +7399,7 @@ static const vshCmdInfo info_iothreadinfo[] = {
{.name = NULL}
};
static const vshCmdOptDef opts_iothreadinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
VIRSH_COMMON_OPT_DOMAIN_CONFIG,
VIRSH_COMMON_OPT_DOMAIN_LIVE,
VIRSH_COMMON_OPT_DOMAIN_CURRENT,
@@ -7474,7 +7475,7 @@ static const vshCmdInfo info_iothreadpin[] = {
};
static const vshCmdOptDef opts_iothreadpin[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "iothread",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -7556,7 +7557,7 @@ static const vshCmdInfo info_iothreadadd[] = {
};
static const vshCmdOptDef opts_iothreadadd[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "id",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -7621,7 +7622,7 @@ static const vshCmdInfo info_iothreaddel[] = {
};
static const vshCmdOptDef opts_iothreaddel[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "id",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -7897,7 +7898,7 @@ static const vshCmdInfo info_cpu_stats[] = {
};
static const vshCmdOptDef opts_cpu_stats[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "total",
.type = VSH_OT_BOOL,
.help = N_("Show total statistics only")
@@ -8236,7 +8237,7 @@ static const vshCmdInfo info_destroy[] = {
};
static const vshCmdOptDef opts_destroy[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "graceful",
.type = VSH_OT_BOOL,
.help = N_("terminate gracefully")
@@ -8289,7 +8290,7 @@ static const vshCmdInfo info_desc[] = {
};
static const vshCmdOptDef opts_desc[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
VIRSH_COMMON_OPT_LIVE(N_("modify/get running state")),
VIRSH_COMMON_OPT_CONFIG(N_("modify/get persistent configuration")),
VIRSH_COMMON_OPT_CURRENT(N_("modify/get current state configuration")),
@@ -8454,7 +8455,7 @@ static const vshCmdInfo info_metadata[] = {
};
static const vshCmdOptDef opts_metadata[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "uri",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -8600,7 +8601,7 @@ static const vshCmdInfo info_inject_nmi[] = {
};
static const vshCmdOptDef opts_inject_nmi[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -8634,7 +8635,7 @@ static const vshCmdInfo info_send_key[] = {
};
static const vshCmdOptDef opts_send_key[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "codeset",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_REQ_OPT,
@@ -8730,7 +8731,7 @@ static const vshCmdInfo info_send_process_signal[] = {
};
static const vshCmdOptDef opts_send_process_signal[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "pid",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -8835,7 +8836,7 @@ static const vshCmdInfo info_setmem[] = {
};
static const vshCmdOptDef opts_setmem[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "kilobytes",
.type = VSH_OT_ALIAS,
.help = "size"
@@ -8916,7 +8917,7 @@ static const vshCmdInfo info_setmaxmem[] = {
};
static const vshCmdOptDef opts_setmaxmem[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "kilobytes",
.type = VSH_OT_ALIAS,
.help = "size"
@@ -9004,7 +9005,7 @@ static const vshCmdInfo info_memtune[] = {
};
static const vshCmdOptDef opts_memtune[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "hard-limit",
.type = VSH_OT_INT,
.help = N_("Max memory, as scaled integer (default KiB)")
@@ -9181,7 +9182,7 @@ static const vshCmdInfo info_perf[] = {
};
static const vshCmdOptDef opts_perf[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "enable",
.type = VSH_OT_STRING,
.help = N_("perf events which will be enabled")
@@ -9315,7 +9316,7 @@ static const vshCmdInfo info_numatune[] = {
};
static const vshCmdOptDef opts_numatune[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "mode",
.type = VSH_OT_STRING,
.help = N_("NUMA mode, one of strict, preferred and interleave \n"
@@ -9450,7 +9451,7 @@ static const vshCmdInfo info_qemu_monitor_command[] = {
};
static const vshCmdOptDef opts_qemu_monitor_command[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "hmp",
.type = VSH_OT_BOOL,
.help = N_("command is in human monitor protocol")
@@ -9751,7 +9752,7 @@ static const vshCmdInfo info_qemu_agent_command[] = {
};
static const vshCmdOptDef opts_qemu_agent_command[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "timeout",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ_OPT,
@@ -9873,7 +9874,7 @@ static const vshCmdInfo info_lxc_enter_namespace[] = {
};
static const vshCmdOptDef opts_lxc_enter_namespace[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "noseclabel",
.type = VSH_OT_BOOL,
.help = N_("Do not change process security label")
@@ -10014,7 +10015,7 @@ static const vshCmdInfo info_dumpxml[] = {
};
static const vshCmdOptDef opts_dumpxml[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "inactive",
.type = VSH_OT_BOOL,
.help = N_("show inactive defined XML")
@@ -10223,7 +10224,7 @@ static const vshCmdInfo info_domname[] = {
};
static const vshCmdOptDef opts_domname[] = {
- VIRSH_COMMON_OPT_DOMAIN(N_("domain id or uuid")),
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain id or uuid"), 0),
{.name = NULL}
};
@@ -10255,7 +10256,7 @@ static const vshCmdInfo info_domrename[] = {
};
static const vshCmdOptDef opts_domrename[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_INACTIVE),
{.name = "new-name",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -10302,7 +10303,8 @@ static const vshCmdInfo info_domid[] = {
};
static const vshCmdOptDef opts_domid[] = {
- VIRSH_COMMON_OPT_DOMAIN(N_("domain name or uuid")),
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain name or uuid"),
+ VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -10339,7 +10341,7 @@ static const vshCmdInfo info_domuuid[] = {
};
static const vshCmdOptDef opts_domuuid[] = {
- VIRSH_COMMON_OPT_DOMAIN(N_("domain id or name")),
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain id or name"), 0),
{.name = NULL}
};
@@ -10376,7 +10378,7 @@ static const vshCmdInfo info_migrate[] = {
};
static const vshCmdOptDef opts_migrate[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "desturi",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -10974,7 +10976,7 @@ static const vshCmdInfo info_migrate_setmaxdowntime[] = {
};
static const vshCmdOptDef opts_migrate_setmaxdowntime[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "downtime",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -11025,7 +11027,7 @@ static const vshCmdInfo info_migrate_getmaxdowntime[] = {
};
static const vshCmdOptDef opts_migrate_getmaxdowntime[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -11066,7 +11068,7 @@ static const vshCmdInfo info_migrate_compcache[] = {
};
static const vshCmdOptDef opts_migrate_compcache[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "size",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ_OPT,
@@ -11123,7 +11125,7 @@ static const vshCmdInfo info_migrate_setspeed[] = {
};
static const vshCmdOptDef opts_migrate_setspeed[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "bandwidth",
.type = VSH_OT_INT,
.flags = VSH_OFLAG_REQ,
@@ -11169,7 +11171,7 @@ static const vshCmdInfo info_migrate_getspeed[] = {
};
static const vshCmdOptDef opts_migrate_getspeed[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -11252,7 +11254,7 @@ static const vshCmdInfo info_domdisplay[] = {
};
static const vshCmdOptDef opts_domdisplay[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "include-password",
.type = VSH_OT_BOOL,
.help = N_("includes the password into the connection URI if available")
@@ -11533,7 +11535,7 @@ static const vshCmdInfo info_vncdisplay[] = {
};
static const vshCmdOptDef opts_vncdisplay[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -11609,7 +11611,7 @@ static const vshCmdInfo info_ttyconsole[] = {
};
static const vshCmdOptDef opts_ttyconsole[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
@@ -11651,7 +11653,7 @@ static const vshCmdInfo info_domhostname[] = {
};
static const vshCmdOptDef opts_domhostname[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = NULL}
};
@@ -11810,7 +11812,7 @@ static const vshCmdInfo info_detach_device[] = {
};
static const vshCmdOptDef opts_detach_device[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
VIRSH_COMMON_OPT_FILE(N_("XML file")),
VIRSH_COMMON_OPT_DOMAIN_PERSISTENT,
VIRSH_COMMON_OPT_DOMAIN_CONFIG,
@@ -11891,7 +11893,7 @@ static const vshCmdInfo info_update_device[] = {
};
static const vshCmdOptDef opts_update_device[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
VIRSH_COMMON_OPT_FILE(N_("XML file")),
VIRSH_COMMON_OPT_DOMAIN_PERSISTENT,
VIRSH_COMMON_OPT_DOMAIN_CONFIG,
@@ -11973,7 +11975,7 @@ static const vshCmdInfo info_detach_interface[] = {
};
static const vshCmdOptDef opts_detach_interface[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "type",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -12416,7 +12418,7 @@ static const vshCmdInfo info_detach_disk[] = {
};
static const vshCmdOptDef opts_detach_disk[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "target",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -12516,7 +12518,7 @@ static const vshCmdInfo info_edit[] = {
};
static const vshCmdOptDef opts_edit[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "skip-validate",
.type = VSH_OT_BOOL,
.help = N_("skip validation of the XML against the schema")
@@ -13475,7 +13477,7 @@ static const vshCmdInfo info_change_media[] = {
};
static const vshCmdOptDef opts_change_media[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "path",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -13636,7 +13638,7 @@ static const vshCmdInfo info_domfstrim[] = {
};
static const vshCmdOptDef opts_domfstrim[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "minimum",
.type = VSH_OT_INT,
.help = N_("Just a hint to ignore contiguous "
@@ -13689,7 +13691,7 @@ static const vshCmdInfo info_domfsfreeze[] = {
};
static const vshCmdOptDef opts_domfsfreeze[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "mountpoint",
.type = VSH_OT_ARGV,
.help = N_("mountpoint path to be frozen")
@@ -13742,7 +13744,7 @@ static const vshCmdInfo info_domfsthaw[] = {
};
static const vshCmdOptDef opts_domfsthaw[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = "mountpoint",
.type = VSH_OT_ARGV,
.help = N_("mountpoint path to be thawed")
@@ -13795,7 +13797,7 @@ static const vshCmdInfo info_domfsinfo[] = {
};
static const vshCmdOptDef opts_domfsinfo[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(VIR_CONNECT_LIST_DOMAINS_ACTIVE),
{.name = NULL}
};
diff --git a/tools/virsh-snapshot.c b/tools/virsh-snapshot.c
index cd89a414a..c44a36f98 100644
--- a/tools/virsh-snapshot.c
+++ b/tools/virsh-snapshot.c
@@ -42,8 +42,8 @@
#include "virxml.h"
#include "conf/snapshot_conf.h"
-#define VIRSH_COMMON_OPT_DOMAIN_FULL \
- VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"))
+#define VIRSH_COMMON_OPT_DOMAIN_FULL(cflags) \
+ VIRSH_COMMON_OPT_DOMAIN(N_("domain name, id or uuid"), cflags)
/* Helper for snapshot-create and snapshot-create-as */
static bool
@@ -125,7 +125,7 @@ static const vshCmdInfo info_snapshot_create[] = {
};
static const vshCmdOptDef opts_snapshot_create[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "xmlfile",
.type = VSH_OT_STRING,
.help = N_("domain snapshot XML")
@@ -319,7 +319,7 @@ static const vshCmdInfo info_snapshot_create_as[] = {
};
static const vshCmdOptDef opts_snapshot_create_as[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "name",
.type = VSH_OT_STRING,
.help = N_("name of snapshot")
@@ -508,7 +508,7 @@ static const vshCmdInfo info_snapshot_edit[] = {
};
static const vshCmdOptDef opts_snapshot_edit[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_STRING,
.help = N_("snapshot name")
@@ -620,7 +620,7 @@ static const vshCmdInfo info_snapshot_current[] = {
};
static const vshCmdOptDef opts_snapshot_current[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "name",
.type = VSH_OT_BOOL,
.help = N_("list the name, rather than the full xml")
@@ -851,7 +851,7 @@ static const vshCmdInfo info_snapshot_info[] = {
};
static const vshCmdOptDef opts_snapshot_info[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_STRING,
.help = N_("snapshot name")
@@ -1401,7 +1401,7 @@ static const vshCmdInfo info_snapshot_list[] = {
};
static const vshCmdOptDef opts_snapshot_list[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "parent",
.type = VSH_OT_BOOL,
.help = N_("add a column showing parent snapshot")
@@ -1657,7 +1657,7 @@ static const vshCmdInfo info_snapshot_dumpxml[] = {
};
static const vshCmdOptDef opts_snapshot_dumpxml[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
@@ -1720,7 +1720,7 @@ static const vshCmdInfo info_snapshot_parent[] = {
};
static const vshCmdOptDef opts_snapshot_parent[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_STRING,
.help = N_("find parent of snapshot name")
@@ -1779,7 +1779,7 @@ static const vshCmdInfo info_snapshot_revert[] = {
};
static const vshCmdOptDef opts_snapshot_revert[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_STRING,
.help = N_("snapshot name")
@@ -1863,7 +1863,7 @@ static const vshCmdInfo info_snapshot_delete[] = {
};
static const vshCmdOptDef opts_snapshot_delete[] = {
- VIRSH_COMMON_OPT_DOMAIN_FULL,
+ VIRSH_COMMON_OPT_DOMAIN_FULL(0),
{.name = "snapshotname",
.type = VSH_OT_STRING,
.help = N_("snapshot name")
diff --git a/tools/virsh.h b/tools/virsh.h
index b353b645a..528e04558 100644
--- a/tools/virsh.h
+++ b/tools/virsh.h
@@ -38,6 +38,7 @@
# include "virthread.h"
# include "virpolkit.h"
# include "vsh.h"
+# include "virsh-completer.h"
# define VIRSH_PROMPT_RW "virsh # "
# define VIRSH_PROMPT_RO "virsh > "
@@ -70,11 +71,13 @@
.help = _helpstr \
}
-# define VIRSH_COMMON_OPT_DOMAIN(_helpstr) \
+# define VIRSH_COMMON_OPT_DOMAIN(_helpstr, cflags) \
{.name = "domain", \
.type = VSH_OT_DATA, \
.flags = VSH_OFLAG_REQ, \
- .help = _helpstr \
+ .help = _helpstr, \
+ .completer = virshDomainNameCompleter, \
+ .completer_flags = cflags, \
}
# define VIRSH_COMMON_OPT_CONFIG(_helpstr) \
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 11/12] virsh: Introduce virshDomainInterfaceCompleter
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/virsh-completer.c | 60 ++++++++++++++++++++++++++++++++++++++++++++
tools/virsh-completer.h | 8 ++++++
tools/virsh-domain-monitor.c | 3 +++
tools/virsh-domain.c | 4 +++
4 files changed, 75 insertions(+)
diff --git a/tools/virsh-completer.c b/tools/virsh-completer.c
index 4e32b882b..25c3aaa0d 100644
--- a/tools/virsh-completer.c
+++ b/tools/virsh-completer.c
@@ -29,6 +29,7 @@
#include "internal.h"
#include "viralloc.h"
#include "virstring.h"
+#include "virxml.h"
char **
@@ -88,3 +89,62 @@ virshDomainNameCompleter(vshControl *ctl,
VIR_FREE(ret);
return NULL;
}
+
+
+char **
+virshDomainInterfaceCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags)
+{
+ virshControlPtr priv = ctl->privData;
+ xmlDocPtr xmldoc = NULL;
+ xmlXPathContextPtr ctxt = NULL;
+ int ninterfaces;
+ xmlNodePtr *interfaces = NULL;
+ size_t i;
+ unsigned int domainXMLFlags = 0;
+ char **ret = NULL;
+
+ virCheckFlags(VIRSH_DOMAIN_INTERFACE_COMPLETER_MAC, NULL);
+
+ if (!priv->conn || virConnectIsAlive(priv->conn) <= 0)
+ return NULL;
+
+ if (vshCommandOptBool(cmd, "config"))
+ domainXMLFlags = VIR_DOMAIN_XML_INACTIVE;
+
+ if (virshDomainGetXML(ctl, cmd, domainXMLFlags, &xmldoc, &ctxt) < 0)
+ goto error;
+
+ ninterfaces = virXPathNodeSet("./devices/interface", ctxt,
&interfaces);
+ if (ninterfaces < 0)
+ goto error;
+
+ if (VIR_ALLOC_N(ret, ninterfaces + 1) < 0)
+ goto error;
+
+ for (i = 0; i < ninterfaces; i++) {
+ ctxt->node = interfaces[i];
+
+ if (!(flags & VIRSH_DOMAIN_INTERFACE_COMPLETER_MAC) &&
+ (ret[i] = virXPathString("string(./target/@dev)", ctxt)))
+ continue;
+
+ /* In case we are dealing with inactive domain XML there's no
+ * <target dev=''/>. Offer MAC addresses then. */
+ if (!(ret[i] = virXPathString("string(./mac/@address)", ctxt)))
+ goto error;
+ }
+
+ VIR_FREE(interfaces);
+ xmlFreeDoc(xmldoc);
+ xmlXPathFreeContext(ctxt);
+ return ret;
+
+ error:
+ VIR_FREE(interfaces);
+ xmlFreeDoc(xmldoc);
+ xmlXPathFreeContext(ctxt);
+ virStringListFree(ret);
+ return NULL;
+}
diff --git a/tools/virsh-completer.h b/tools/virsh-completer.h
index 288e17909..680cd12ff 100644
--- a/tools/virsh-completer.h
+++ b/tools/virsh-completer.h
@@ -30,4 +30,12 @@ char ** virshDomainNameCompleter(vshControl *ctl,
const vshCmd *cmd,
unsigned int flags);
+enum {
+ VIRSH_DOMAIN_INTERFACE_COMPLETER_MAC = 1 << 1, /* Return just MACs */
+};
+
+char ** virshDomainInterfaceCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags);
+
#endif
diff --git a/tools/virsh-domain-monitor.c b/tools/virsh-domain-monitor.c
index d0edb177d..dd89f0758 100644
--- a/tools/virsh-domain-monitor.c
+++ b/tools/virsh-domain-monitor.c
@@ -659,6 +659,7 @@ static const vshCmdOptDef opts_domif_getlink[] = {
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = virshDomainInterfaceCompleter,
.help = N_("interface device (MAC Address)")
},
{.name = "persistent",
@@ -995,6 +996,7 @@ static const vshCmdOptDef opts_domifstat[] = {
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = virshDomainInterfaceCompleter,
.help = N_("interface device")
},
{.name = NULL}
@@ -2149,6 +2151,7 @@ static const vshCmdOptDef opts_domifaddr[] = {
{.name = "interface",
.type = VSH_OT_STRING,
.flags = VSH_OFLAG_NONE,
+ .completer = virshDomainInterfaceCompleter,
.help = N_("network interface name")},
{.name = "full",
.type = VSH_OT_BOOL,
diff --git a/tools/virsh-domain.c b/tools/virsh-domain.c
index b579e8b16..10ffb8f5e 100644
--- a/tools/virsh-domain.c
+++ b/tools/virsh-domain.c
@@ -2977,6 +2977,7 @@ static const vshCmdOptDef opts_domif_setlink[] = {
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = virshDomainInterfaceCompleter,
.help = N_("interface device (MAC Address)")
},
{.name = "state",
@@ -3147,6 +3148,7 @@ static const vshCmdOptDef opts_domiftune[] = {
{.name = "interface",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = virshDomainInterfaceCompleter,
.help = N_("interface device (MAC Address)")
},
{.name = "inbound",
@@ -11983,6 +11985,8 @@ static const vshCmdOptDef opts_detach_interface[] = {
},
{.name = "mac",
.type = VSH_OT_STRING,
+ .completer = virshDomainInterfaceCompleter,
+ .completer_flags = VIRSH_DOMAIN_INTERFACE_COMPLETER_MAC,
.help = N_("MAC address")
},
VIRSH_COMMON_OPT_DOMAIN_PERSISTENT,
--
2.13.6
10:06 a.m.
New subject: [libvirt] [PATCH v2 12/12] virt-admin: Introduce vshAdmServerCompleter
Signed-off-by: Michal Privoznik <mprivozn(a)redhat.com>
---
tools/Makefile.am | 9 ++++++
tools/virt-admin-completer.c | 76 ++++++++++++++++++++++++++++++++++++++++++++
tools/virt-admin-completer.h | 33 +++++++++++++++++++
tools/virt-admin.c | 8 +++++
4 files changed, 126 insertions(+)
create mode 100644 tools/virt-admin-completer.c
create mode 100644 tools/virt-admin-completer.h
diff --git a/tools/Makefile.am b/tools/Makefile.am
index 8eddc7bbe..a1652d459 100644
--- a/tools/Makefile.am
+++ b/tools/Makefile.am
@@ -261,6 +261,15 @@ virt_admin_SOURCES = \
virt-admin.c virt-admin.h \
$(NULL)
+VIRT_ADMIN_COMPLETER = \
+ virt-admin-completer.c virt-admin-completer.h
+
+if WITH_READLINE
+virt_admin_SOURCES += $(VIRT_ADMIN_COMPLETER)
+else ! WITH_READLINE
+EXTRA_DIST += $(VIRT_ADMIN_COMPLETER)
+endif ! WITH_READLINE
+
virt_admin_LDFLAGS = \
$(AM_LDFLAGS) \
$(COVERAGE_LDFLAGS) \
diff --git a/tools/virt-admin-completer.c b/tools/virt-admin-completer.c
new file mode 100644
index 000000000..2cd471f32
--- /dev/null
+++ b/tools/virt-admin-completer.c
@@ -0,0 +1,76 @@
+/*
+ * virt-admin-completer.c: virt-admin completer callbacks
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library. If not, see
+ * <http://www.gnu.org/licenses/>;.
+ *
+ * Michal Privoznik <mprivozn(a)redhat.com>
+ *
+ */
+
+#include <config.h>
+
+#include "virt-admin-completer.h"
+#include "internal.h"
+#include "virt-admin.h"
+#include "viralloc.h"
+#include "virstring.h"
+
+
+char **
+vshAdmServerCompleter(vshControl *ctl,
+ const vshCmd *cmd ATTRIBUTE_UNUSED,
+ unsigned int flags)
+{
+ vshAdmControlPtr priv = ctl->privData;
+ virAdmServerPtr *srvs = NULL;
+ int nsrvs = 0;
+ size_t i = 0;
+ char **ret = NULL;
+
+ virCheckFlags(0, NULL);
+
+ if (!priv->conn || virAdmConnectIsAlive(priv->conn) <= 0)
+ return NULL;
+
+ /* Obtain a list of available servers on the daemon */
+ if ((nsrvs = virAdmConnectListServers(priv->conn, &srvs, 0)) < 0)
+ return NULL;
+
+ if (VIR_ALLOC_N(ret, nsrvs + 1) < 0)
+ goto error;
+
+ for (i = 0; i < nsrvs; i++) {
+ const char *name = virAdmServerGetName(srvs[i]);
+
+ if (VIR_STRDUP(ret[i], name) < 0)
+ goto error;
+
+ virAdmServerFree(srvs[i]);
+ }
+ VIR_FREE(srvs);
+
+ return ret;
+
+ error:
+ for (; i < nsrvs; i++)
+ virAdmServerFree(srvs[i]);
+ VIR_FREE(srvs);
+ for (i = 0; i < nsrvs; i++)
+ VIR_FREE(ret[i]);
+ VIR_FREE(ret);
+ return ret;
+}
diff --git a/tools/virt-admin-completer.h b/tools/virt-admin-completer.h
new file mode 100644
index 000000000..7507b95c1
--- /dev/null
+++ b/tools/virt-admin-completer.h
@@ -0,0 +1,33 @@
+/*
+ * virt-admin-completer.h: virt-admin completer callbacks
+ *
+ * Copyright (C) 2017 Red Hat, Inc.
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2.1 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library. If not, see
+ * <http://www.gnu.org/licenses/>;.
+ *
+ * Michal Privoznik <mprivozn(a)redhat.com>
+ *
+ */
+
+#ifndef VIRT_ADMIN_COMPLETER
+# define VIRT_ADMIN_COMPLETER
+
+# include "vsh.h"
+
+char **
+vshAdmServerCompleter(vshControl *ctl,
+ const vshCmd *cmd,
+ unsigned int flags);
+#endif
diff --git a/tools/virt-admin.c b/tools/virt-admin.c
index ef5bada63..c86b5763a 100644
--- a/tools/virt-admin.c
+++ b/tools/virt-admin.c
@@ -39,6 +39,7 @@
#include "virthread.h"
#include "virgettext.h"
#include "virtime.h"
+#include "virt-admin-completer.h"
/* Gnulib doesn't guarantee SA_SIGINFO support. */
#ifndef SA_SIGINFO
@@ -428,6 +429,7 @@ static const vshCmdOptDef opts_srv_threadpool_info[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("Server to retrieve threadpool attributes from."),
},
{.name = NULL}
@@ -489,6 +491,7 @@ static const vshCmdOptDef opts_srv_threadpool_set[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("Server to alter threadpool attributes on."),
},
{.name = "min-workers",
@@ -595,6 +598,7 @@ static const vshCmdOptDef opts_srv_clients_list[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("server which to list connected clients from"),
},
{.name = NULL}
@@ -676,6 +680,7 @@ static const vshCmdOptDef opts_client_info[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("server to which <client> is connected to"),
},
{.name = "client",
@@ -763,6 +768,7 @@ static const vshCmdOptDef opts_client_disconnect[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("server which the client is currently connected to"),
},
{.name = "client",
@@ -828,6 +834,7 @@ static const vshCmdOptDef opts_srv_clients_info[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("Server to retrieve the client limits from."),
},
{.name = NULL}
@@ -887,6 +894,7 @@ static const vshCmdOptDef opts_srv_clients_set[] = {
{.name = "server",
.type = VSH_OT_DATA,
.flags = VSH_OFLAG_REQ,
+ .completer = vshAdmServerCompleter,
.help = N_("Server to alter the client-related configuration limits
on."),
},
{.name = "max-clients",
--
2.13.6
11:11 a.m.
On 11/13/2017 05:06 PM, Michal Privoznik wrote:
v2 of:
https://www.redhat.com/archives/libvir-list/2017-November/msg00213.html
diff to v1:
-cmdComplete reworked
-Dozen of small improvements
The command completion is still missing. I mean, 'virsh
start<TAB><TAB>' will
still give you list of --options rather than a list of domains to start with
it. And honestly, the code is so ugly, that I haven't even tried to implement
it. Be my guest.
Michal Privoznik (12):
vshCommandParse: Don't leak @tkdata
vshCommandStringParse: Allow retrieving partial result
vshReadlineParse: Escape returned results if needed
vshCommandOpt: Allow caller avoiding assert()
vsh: Fix vshCompleter signature
vsh: Call vshCmdOptDef.completer properly
vshCompleter: Pass partially parsed command
vsh: Introduce complete command
tools: Provide bash autompletion file
virsh: Introduce virshDomainNameCompleter
virsh: Introduce virshDomainInterfaceCompleter
virt-admin: Introduce vshAdmServerCompleter
configure.ac | 3 +
libvirt.spec.in | 2 +
m4/virt-bash-completion.m4 | 74 ++++++++++++++
tools/Makefile.am | 40 +++++++-
tools/bash-completion/vsh | 67 +++++++++++++
tools/virsh-completer.c | 150 ++++++++++++++++++++++++++++
tools/virsh-completer.h | 41 ++++++++
tools/virsh-domain-monitor.c | 33 +++---
tools/virsh-domain.c | 186 +++++++++++++++++-----------------
tools/virsh-snapshot.c | 24 ++---
tools/virsh.c | 5 +-
tools/virsh.h | 7 +-
tools/virt-admin-completer.c | 76 ++++++++++++++
tools/virt-admin-completer.h | 33 ++++++
tools/virt-admin.c | 13 ++-
tools/vsh.c | 232 +++++++++++++++++++++++++++++++++----------
tools/vsh.h | 23 ++++-
17 files changed, 831 insertions(+), 178 deletions(-)
create mode 100644 m4/virt-bash-completion.m4
create mode 100644 tools/bash-completion/vsh
create mode 100644 tools/virsh-completer.c
create mode 100644 tools/virsh-completer.h
create mode 100644 tools/virt-admin-completer.c
create mode 100644 tools/virt-admin-completer.h
Self-NACK. I've found a way to throw away parsing code duplication done
in vshReadlineParse(). I'm working on v3.
Michal
2537
days inactive
2548
days old
13 comments
1 participants
participants (1)
-
Michal Privoznik