5:51 a.m.
When qemu cannot startup, we will call EOF notify callback.
Unfortunately, there is a bug in libvirt, and it will cause
mon->ref to be 0 while we call EOF notify callback. This
bug will cause the libvirt to be deadlock.
We call the other callback while holding the reference. So
I think we should also hold the reference here.
Note: this patch does not fix the bug. The libvirt will be
deadlock in qemuMonitorUnwatch() because the monitor is freed
unexpectedly.
I am still investigating this bug. But if I set a breakpoint
in qemuMonitorUnref(), it does not happen now. If i remove
the breakpoint, it will happen sometime(the probability is
about 20%).
The steps to reproduce this bug:
1. use newest qemu-kvm
2. add a host pci device into guest config file
3. start the guest
The qemu will fail with the following error message:
Failed to assign irq for "hostdev0": Input/output error
Perhaps you are assigning a device that shares an IRQ with another device?
I have reported qemu's problem to qemu maillist.
---
src/qemu/qemu_monitor.c | 16 ++++++++++++----
1 files changed, 12 insertions(+), 4 deletions(-)
diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c
index 78eb492..20eb9ea 100644
--- a/src/qemu/qemu_monitor.c
+++ b/src/qemu/qemu_monitor.c
@@ -668,10 +668,14 @@ qemuMonitorIO(int watch, int fd, int events, void *opaque) {
/* Make sure anyone waiting wakes up now */
virCondSignal(&mon->notify);
- if (qemuMonitorUnref(mon) > 0)
- qemuMonitorUnlock(mon);
+
+ /* hold the reference when call monitor's callback to avoid deadlock */
+ qemuMonitorUnlock(mon);
VIR_DEBUG("Triggering EOF callback");
(eofNotify)(mon, vm);
+ qemuMonitorLock(mon);
+ if (qemuMonitorUnref(mon) > 0)
+ qemuMonitorUnlock(mon);
} else if (error) {
void (*errorNotify)(qemuMonitorPtr, virDomainObjPtr)
= mon->cb->errorNotify;
@@ -679,10 +683,14 @@ qemuMonitorIO(int watch, int fd, int events, void *opaque) {
/* Make sure anyone waiting wakes up now */
virCondSignal(&mon->notify);
- if (qemuMonitorUnref(mon) > 0)
- qemuMonitorUnlock(mon);
+
+ /* hold the reference when call monitor's callback to avoid deadlock */
+ qemuMonitorUnlock(mon);
VIR_DEBUG("Triggering error callback");
(errorNotify)(mon, vm);
+ qemuMonitorLock(mon);
+ if (qemuMonitorUnref(mon) > 0)
+ qemuMonitorUnlock(mon);
} else {
if (qemuMonitorUnref(mon) > 0)
qemuMonitorUnlock(mon);
--
1.7.1
1:37 a.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
---
src/qemu/qemu_process.c | 20 ++++++++++++++------
src/qemu/qemu_process.h | 2 ++
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 0af3751..44814df 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -3633,10 +3633,11 @@ qemuProcessKill(struct qemud_driver *driver,
VIR_DEBUG("vm=%s pid=%d flags=%x",
vm->def->name, vm->pid, flags);
- if (!virDomainObjIsActive(vm)) {
- VIR_DEBUG("VM '%s' not active", vm->def->name);
- return 0;
- }
+ if (!(flags & VIR_QEMU_PROCESS_KILL_NOCHECK))
+ if (!virDomainObjIsActive(vm)) {
+ VIR_DEBUG("VM '%s' not active", vm->def->name);
+ return 0;
+ }
/* This loop sends SIGTERM (or SIGKILL if flags has
* VIR_QEMU_PROCESS_KILL_FORCE and VIR_QEMU_PROCESS_KILL_NOWAIT),
@@ -3739,6 +3740,13 @@ void qemuProcessStop(struct qemud_driver *driver,
return;
}
+ /*
+ * We may unlock driver and vm in qemuProcessKill(), so the other thread
+ * can lock driver and vm, and then call qemuProcessStop(). So we should
+ * set vm->def->id to -1 here to avoid qemuProcessStop() called twice.
+ */
+ vm->def->id = -1;
+
if ((logfile = qemuDomainCreateLog(driver, vm, true)) < 0) {
/* To not break the normal domain shutdown process, skip the
* timestamp log writing if failed on opening log file. */
@@ -3801,7 +3809,8 @@ void qemuProcessStop(struct qemud_driver *driver,
}
/* shut it off for sure */
- ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE));
+ ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE|
+ VIR_QEMU_PROCESS_KILL_NOCHECK));
/* Stop autodestroy in case guest is restarted */
qemuProcessAutoDestroyRemove(driver, vm);
@@ -3892,7 +3901,6 @@ retry:
vm->taint = 0;
vm->pid = -1;
- vm->def->id = -1;
virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, reason);
VIR_FREE(priv->vcpupids);
priv->nvcpupids = 0;
diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h
index 761db6f..891f7a5 100644
--- a/src/qemu/qemu_process.h
+++ b/src/qemu/qemu_process.h
@@ -72,6 +72,8 @@ int qemuProcessAttach(virConnectPtr conn,
typedef enum {
VIR_QEMU_PROCESS_KILL_FORCE = 1 << 0,
VIR_QEMU_PROCESS_KILL_NOWAIT = 1 << 1,
+ VIR_QEMU_PROCESS_KILL_NOCHECK = 1 << 2, /* donot check whether the vm is
+ running */
} virQemuProcessKillMode;
int qemuProcessKill(struct qemud_driver *driver,
--
1.7.1
12:46 a.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
ping
At 03/16/2012 02:37 PM, Wen Congyang Wrote:
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
---
src/qemu/qemu_process.c | 20 ++++++++++++++------
src/qemu/qemu_process.h | 2 ++
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 0af3751..44814df 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -3633,10 +3633,11 @@ qemuProcessKill(struct qemud_driver *driver,
VIR_DEBUG("vm=%s pid=%d flags=%x",
vm->def->name, vm->pid, flags);
- if (!virDomainObjIsActive(vm)) {
- VIR_DEBUG("VM '%s' not active", vm->def->name);
- return 0;
- }
+ if (!(flags & VIR_QEMU_PROCESS_KILL_NOCHECK))
+ if (!virDomainObjIsActive(vm)) {
+ VIR_DEBUG("VM '%s' not active", vm->def->name);
+ return 0;
+ }
/* This loop sends SIGTERM (or SIGKILL if flags has
* VIR_QEMU_PROCESS_KILL_FORCE and VIR_QEMU_PROCESS_KILL_NOWAIT),
@@ -3739,6 +3740,13 @@ void qemuProcessStop(struct qemud_driver *driver,
return;
}
+ /*
+ * We may unlock driver and vm in qemuProcessKill(), so the other thread
+ * can lock driver and vm, and then call qemuProcessStop(). So we should
+ * set vm->def->id to -1 here to avoid qemuProcessStop() called twice.
+ */
+ vm->def->id = -1;
+
if ((logfile = qemuDomainCreateLog(driver, vm, true)) < 0) {
/* To not break the normal domain shutdown process, skip the
* timestamp log writing if failed on opening log file. */
@@ -3801,7 +3809,8 @@ void qemuProcessStop(struct qemud_driver *driver,
}
/* shut it off for sure */
- ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE));
+ ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE|
+ VIR_QEMU_PROCESS_KILL_NOCHECK));
/* Stop autodestroy in case guest is restarted */
qemuProcessAutoDestroyRemove(driver, vm);
@@ -3892,7 +3901,6 @@ retry:
vm->taint = 0;
vm->pid = -1;
- vm->def->id = -1;
virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, reason);
VIR_FREE(priv->vcpupids);
priv->nvcpupids = 0;
diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h
index 761db6f..891f7a5 100644
--- a/src/qemu/qemu_process.h
+++ b/src/qemu/qemu_process.h
@@ -72,6 +72,8 @@ int qemuProcessAttach(virConnectPtr conn,
typedef enum {
VIR_QEMU_PROCESS_KILL_FORCE = 1 << 0,
VIR_QEMU_PROCESS_KILL_NOWAIT = 1 << 1,
+ VIR_QEMU_PROCESS_KILL_NOCHECK = 1 << 2, /* donot check whether the vm is
+ running */
} virQemuProcessKillMode;
int qemuProcessKill(struct qemud_driver *driver,
1:26 a.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
On Fri, Mar 16, 2012 at 02:37:42PM +0800, Wen Congyang wrote:
When qemu cannot start, we may call qemuProcessStop() twice.
We have check whether the vm is running at the beginning of
qemuProcessStop() to avoid libvirt deadlock. We call
qemuProcessStop() with driver and vm locked. It seems that
we can avoid libvirt deadlock. But unfortunately we may
unlock driver and vm in the function qemuProcessKill() while
vm->def->id is not -1. So qemuProcessStop() will be run twice,
and monitor will be freed unexpectedly. So we should set
vm->def->id to -1 at the beginning of qemuProcessStop().
---
src/qemu/qemu_process.c | 20 ++++++++++++++------
src/qemu/qemu_process.h | 2 ++
2 files changed, 16 insertions(+), 6 deletions(-)
diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
index 0af3751..44814df 100644
--- a/src/qemu/qemu_process.c
+++ b/src/qemu/qemu_process.c
@@ -3633,10 +3633,11 @@ qemuProcessKill(struct qemud_driver *driver,
VIR_DEBUG("vm=%s pid=%d flags=%x",
vm->def->name, vm->pid, flags);
- if (!virDomainObjIsActive(vm)) {
- VIR_DEBUG("VM '%s' not active", vm->def->name);
- return 0;
- }
+ if (!(flags & VIR_QEMU_PROCESS_KILL_NOCHECK))
+ if (!virDomainObjIsActive(vm)) {
+ VIR_DEBUG("VM '%s' not active", vm->def->name);
+ return 0;
+ }
/* This loop sends SIGTERM (or SIGKILL if flags has
* VIR_QEMU_PROCESS_KILL_FORCE and VIR_QEMU_PROCESS_KILL_NOWAIT),
@@ -3739,6 +3740,13 @@ void qemuProcessStop(struct qemud_driver *driver,
return;
}
+ /*
+ * We may unlock driver and vm in qemuProcessKill(), so the other thread
+ * can lock driver and vm, and then call qemuProcessStop(). So we should
+ * set vm->def->id to -1 here to avoid qemuProcessStop() called twice.
+ */
+ vm->def->id = -1;
+
if ((logfile = qemuDomainCreateLog(driver, vm, true)) < 0) {
/* To not break the normal domain shutdown process, skip the
* timestamp log writing if failed on opening log file. */
@@ -3801,7 +3809,8 @@ void qemuProcessStop(struct qemud_driver *driver,
}
/* shut it off for sure */
- ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE));
+ ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE|
+ VIR_QEMU_PROCESS_KILL_NOCHECK));
/* Stop autodestroy in case guest is restarted */
qemuProcessAutoDestroyRemove(driver, vm);
@@ -3892,7 +3901,6 @@ retry:
vm->taint = 0;
vm->pid = -1;
- vm->def->id = -1;
virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, reason);
VIR_FREE(priv->vcpupids);
priv->nvcpupids = 0;
diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h
index 761db6f..891f7a5 100644
--- a/src/qemu/qemu_process.h
+++ b/src/qemu/qemu_process.h
@@ -72,6 +72,8 @@ int qemuProcessAttach(virConnectPtr conn,
typedef enum {
VIR_QEMU_PROCESS_KILL_FORCE = 1 << 0,
VIR_QEMU_PROCESS_KILL_NOWAIT = 1 << 1,
+ VIR_QEMU_PROCESS_KILL_NOCHECK = 1 << 2, /* donot check whether the vm is
+ running */
} virQemuProcessKillMode;
int qemuProcessKill(struct qemud_driver *driver,
Hi Wen,
sorry for the delay in reviewing the patch. I think I understand the
issue, and removing the pid and using an extra flag to qemuProcessKill
to avoid the race sounds reasonable. I rebased the patch a bit, made
some cosmetic changes especially on the comments and pushed it so it is
included in rc2 for more testing,
thanks !
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
8:45 a.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
Quoting Daniel Veillard (veillard(a)redhat.com):
On Fri, Mar 16, 2012 at 02:37:42PM +0800, Wen Congyang wrote:
> When qemu cannot start, we may call qemuProcessStop() twice.
> We have check whether the vm is running at the beginning of
> qemuProcessStop() to avoid libvirt deadlock. We call
> qemuProcessStop() with driver and vm locked. It seems that
> we can avoid libvirt deadlock. But unfortunately we may
> unlock driver and vm in the function qemuProcessKill() while
> vm->def->id is not -1. So qemuProcessStop() will be run twice,
> and monitor will be freed unexpectedly. So we should set
> vm->def->id to -1 at the beginning of qemuProcessStop().
Oh, uh, Huh. This seems like it could be responsible for what I was
reporting a few days ago (*1). I spent most of yesterday trying to
track it down, only to finally realize that the QemuProcessStart would
silently die at various places. So i was getting ready to send an email
postulating that what's happening is that a virsh list starts, then
a virsh start starts, and when the virsh list ends it somehow causes
the virsh start to be killed.
I'll test and see if this patch fixes it.
thanks,
-serge
*1: If I create 4 vms and do
for i in `seq 1 4`; do virsh start o$i > /tmp/o$i 2>&1 &; done; for i in
`seq 1 4`; do virsh list > /dev/null 2>&1; done; sleep 1; virsh list
most of the time at least one vm won't start.
> ---
> src/qemu/qemu_process.c | 20 ++++++++++++++------
> src/qemu/qemu_process.h | 2 ++
> 2 files changed, 16 insertions(+), 6 deletions(-)
>
> diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c
> index 0af3751..44814df 100644
> --- a/src/qemu/qemu_process.c
> +++ b/src/qemu/qemu_process.c
> @@ -3633,10 +3633,11 @@ qemuProcessKill(struct qemud_driver *driver,
> VIR_DEBUG("vm=%s pid=%d flags=%x",
> vm->def->name, vm->pid, flags);
>
> - if (!virDomainObjIsActive(vm)) {
> - VIR_DEBUG("VM '%s' not active", vm->def->name);
> - return 0;
> - }
> + if (!(flags & VIR_QEMU_PROCESS_KILL_NOCHECK))
> + if (!virDomainObjIsActive(vm)) {
> + VIR_DEBUG("VM '%s' not active",
vm->def->name);
> + return 0;
> + }
>
> /* This loop sends SIGTERM (or SIGKILL if flags has
> * VIR_QEMU_PROCESS_KILL_FORCE and VIR_QEMU_PROCESS_KILL_NOWAIT),
> @@ -3739,6 +3740,13 @@ void qemuProcessStop(struct qemud_driver *driver,
> return;
> }
>
> + /*
> + * We may unlock driver and vm in qemuProcessKill(), so the other thread
> + * can lock driver and vm, and then call qemuProcessStop(). So we should
> + * set vm->def->id to -1 here to avoid qemuProcessStop() called twice.
> + */
> + vm->def->id = -1;
> +
> if ((logfile = qemuDomainCreateLog(driver, vm, true)) < 0) {
> /* To not break the normal domain shutdown process, skip the
> * timestamp log writing if failed on opening log file. */
> @@ -3801,7 +3809,8 @@ void qemuProcessStop(struct qemud_driver *driver,
> }
>
> /* shut it off for sure */
> - ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE));
> + ignore_value(qemuProcessKill(driver, vm, VIR_QEMU_PROCESS_KILL_FORCE|
> + VIR_QEMU_PROCESS_KILL_NOCHECK));
>
> /* Stop autodestroy in case guest is restarted */
> qemuProcessAutoDestroyRemove(driver, vm);
> @@ -3892,7 +3901,6 @@ retry:
>
> vm->taint = 0;
> vm->pid = -1;
> - vm->def->id = -1;
> virDomainObjSetState(vm, VIR_DOMAIN_SHUTOFF, reason);
> VIR_FREE(priv->vcpupids);
> priv->nvcpupids = 0;
> diff --git a/src/qemu/qemu_process.h b/src/qemu/qemu_process.h
> index 761db6f..891f7a5 100644
> --- a/src/qemu/qemu_process.h
> +++ b/src/qemu/qemu_process.h
> @@ -72,6 +72,8 @@ int qemuProcessAttach(virConnectPtr conn,
> typedef enum {
> VIR_QEMU_PROCESS_KILL_FORCE = 1 << 0,
> VIR_QEMU_PROCESS_KILL_NOWAIT = 1 << 1,
> + VIR_QEMU_PROCESS_KILL_NOCHECK = 1 << 2, /* donot check whether the vm is
> + running */
> } virQemuProcessKillMode;
>
> int qemuProcessKill(struct qemud_driver *driver,
Hi Wen,
sorry for the delay in reviewing the patch. I think I understand the
issue, and removing the pid and using an extra flag to qemuProcessKill
to avoid the race sounds reasonable. I rebased the patch a bit, made
some cosmetic changes especially on the comments and pushed it so it is
included in rc2 for more testing,
thanks !
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
--
libvir-list mailing list
libvir-list(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvir-list
10:45 a.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
On Fri, Mar 30, 2012 at 08:45:35AM -0500, Serge Hallyn wrote:
Quoting Daniel Veillard (veillard(a)redhat.com):
> On Fri, Mar 16, 2012 at 02:37:42PM +0800, Wen Congyang wrote:
> > When qemu cannot start, we may call qemuProcessStop() twice.
> > We have check whether the vm is running at the beginning of
> > qemuProcessStop() to avoid libvirt deadlock. We call
> > qemuProcessStop() with driver and vm locked. It seems that
> > we can avoid libvirt deadlock. But unfortunately we may
> > unlock driver and vm in the function qemuProcessKill() while
> > vm->def->id is not -1. So qemuProcessStop() will be run twice,
> > and monitor will be freed unexpectedly. So we should set
> > vm->def->id to -1 at the beginning of qemuProcessStop().
Oh, uh, Huh. This seems like it could be responsible for what I was
reporting a few days ago (*1). I spent most of yesterday trying to
track it down, only to finally realize that the QemuProcessStart would
silently die at various places. So i was getting ready to send an email
postulating that what's happening is that a virsh list starts, then
a virsh start starts, and when the virsh list ends it somehow causes
the virsh start to be killed.
I'll test and see if this patch fixes it.
I guess I need to resurect my patch checker, tune it and
make it send warning on patches not ACK'ed or reviewed automatically,
or even better make it a web page to avoid boring people.
http://libvirt.org/git/?p=patchchecker.git;a=summary
I had that patch on my radar and though I took an awful long time
to review it it's there.
BTW I'm late for rc2, I will make it tomorrow I guess, sorry about
it this is due to events out of my control :-\
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
4:11 p.m.
New subject: [libvirt] [PATCH] fix deadlock when qemu cannot start
Quoting Daniel Veillard (veillard(a)redhat.com):
On Fri, Mar 30, 2012 at 08:45:35AM -0500, Serge Hallyn wrote:
> Quoting Daniel Veillard (veillard(a)redhat.com):
> > On Fri, Mar 16, 2012 at 02:37:42PM +0800, Wen Congyang wrote:
> > > When qemu cannot start, we may call qemuProcessStop() twice.
> > > We have check whether the vm is running at the beginning of
> > > qemuProcessStop() to avoid libvirt deadlock. We call
> > > qemuProcessStop() with driver and vm locked. It seems that
> > > we can avoid libvirt deadlock. But unfortunately we may
> > > unlock driver and vm in the function qemuProcessKill() while
> > > vm->def->id is not -1. So qemuProcessStop() will be run twice,
> > > and monitor will be freed unexpectedly. So we should set
> > > vm->def->id to -1 at the beginning of qemuProcessStop().
>
> Oh, uh, Huh. This seems like it could be responsible for what I was
> reporting a few days ago (*1). I spent most of yesterday trying to
> track it down, only to finally realize that the QemuProcessStart would
> silently die at various places. So i was getting ready to send an email
> postulating that what's happening is that a virsh list starts, then
> a virsh start starts, and when the virsh list ends it somehow causes
> the virsh start to be killed.
>
> I'll test and see if this patch fixes it.
I guess I need to resurect my patch checker, tune it and
make it send warning on patches not ACK'ed or reviewed automatically,
or even better make it a web page to avoid boring people.
http://libvirt.org/git/?p=patchchecker.git;a=summary
I had that patch on my radar and though I took an awful long time
to review it it's there.
BTW I'm late for rc2, I will make it tomorrow I guess, sorry about
it this is due to events out of my control :-\
Daniel
Alas, this patch (by itself) doesn't fix the issue for me.
4620
days inactive
4635
days old
6 comments
3 participants
participants (3)
-
Daniel Veillard -
Serge Hallyn -
Wen Congyang