[libvirt] [PATCH 3/3] qemu: don't retry connect() if doing FD passing

Since libvirt called bind() and listen() on the UNIX socket, it is guaranteed that connect() will immediately succeed, if QEMU is running normally. It will only fail if QEMU has closed the monitor socket by mistake or if QEMU has exited, letting the kernel close it. With this in mind we can remove the retry loop and timeout when connecting to the QEMU monitor if we are doing FD passing. Libvirt can go straight to sending the QMP greeting and will simply block waiting for a reply until QEMU is ready. Signed-off-by: Daniel P. Berrangé <berrange(a)redhat.com&gt; --- src/qemu/qemu_capabilities.c | 2 +- src/qemu/qemu_monitor.c | 54 ++++++++++++++++++++++++++------------------ src/qemu/qemu_monitor.h | 1 + src/qemu/qemu_process.c | 27 ++++++++++++++++------ tests/qemumonitortestutils.c | 1 + 5 files changed, 55 insertions(+), 30 deletions(-) diff --git a/src/qemu/qemu_capabilities.c b/src/qemu/qemu_capabilities.c index c20dc32126..dd392c9c22 100644 --- a/src/qemu/qemu_capabilities.c +++ b/src/qemu/qemu_capabilities.c @@ -5123,7 +5123,7 @@ virQEMUCapsInitQMPCommandRun(virQEMUCapsInitQMPCommandPtr cmd, cmd->vm->pid = cmd->pid; - if (!(cmd->mon = qemuMonitorOpen(cmd->vm, &cmd->config, true, + if (!(cmd->mon = qemuMonitorOpen(cmd->vm, &cmd->config, true, true, 0, &callbacks, NULL))) goto ignore; diff --git a/src/qemu/qemu_monitor.c b/src/qemu/qemu_monitor.c index 1d67a97789..bf1a305656 100644 --- a/src/qemu/qemu_monitor.c +++ b/src/qemu/qemu_monitor.c @@ -349,6 +349,7 @@ qemuMonitorDispose(void *obj) static int qemuMonitorOpenUnix(const char *monitor, pid_t cpid, + bool retry, unsigned long long timeout) { struct sockaddr_un addr; @@ -370,31 +371,39 @@ qemuMonitorOpenUnix(const char *monitor, goto error; } - if (virTimeBackOffStart(&timebackoff, 1, timeout * 1000) < 0) - goto error; - while (virTimeBackOffWait(&timebackoff)) { - ret = connect(monfd, (struct sockaddr *) &addr, sizeof(addr)); - - if (ret == 0) - break; + if (retry) { + if (virTimeBackOffStart(&timebackoff, 1, timeout * 1000) < 0) + goto error; + while (virTimeBackOffWait(&timebackoff)) { + ret = connect(monfd, (struct sockaddr *) &addr, sizeof(addr)); - if ((errno == ENOENT || errno == ECONNREFUSED) && - (!cpid || virProcessKill(cpid, 0) == 0)) { - /* ENOENT : Socket may not have shown up yet - * ECONNREFUSED : Leftover socket hasn't been removed yet */ - continue; - } + if (ret == 0) + break; - virReportSystemError(errno, "%s", - _("failed to connect to monitor socket")); - goto error; + if ((errno == ENOENT || errno == ECONNREFUSED) && + (!cpid || virProcessKill(cpid, 0) == 0)) { + /* ENOENT : Socket may not have shown up yet + * ECONNREFUSED : Leftover socket hasn't been removed yet */ + continue; + } - } + virReportSystemError(errno, "%s", + _("failed to connect to monitor socket")); + goto error; + } - if (ret != 0) { - virReportSystemError(errno, "%s", - _("monitor socket did not show up")); - goto error; + if (ret != 0) { + virReportSystemError(errno, "%s", + _("monitor socket did not show up")); + goto error; + } + } else { + ret = connect(monfd, (struct sockaddr *) &addr, sizeof(addr)); + if (ret < 0) { + virReportSystemError(errno, "%s", + _("failed to connect to monitor socket")); + goto error; + } } return monfd; @@ -914,6 +923,7 @@ qemuMonitorPtr qemuMonitorOpen(virDomainObjPtr vm, virDomainChrSourceDefPtr config, bool json, + bool retry, unsigned long long timeout, qemuMonitorCallbacksPtr cb, void *opaque) @@ -928,7 +938,7 @@ qemuMonitorOpen(virDomainObjPtr vm, case VIR_DOMAIN_CHR_TYPE_UNIX: hasSendFD = true; if ((fd = qemuMonitorOpenUnix(config->data.nix.path, - vm->pid, timeout)) < 0) + vm->pid, retry, timeout)) < 0) return NULL; break; diff --git a/src/qemu/qemu_monitor.h b/src/qemu/qemu_monitor.h index adfa87aba9..c1483c52c4 100644 --- a/src/qemu/qemu_monitor.h +++ b/src/qemu/qemu_monitor.h @@ -320,6 +320,7 @@ char *qemuMonitorUnescapeArg(const char *in); qemuMonitorPtr qemuMonitorOpen(virDomainObjPtr vm, virDomainChrSourceDefPtr config, bool json, + bool retry, unsigned long long timeout, qemuMonitorCallbacksPtr cb, void *opaque) diff --git a/src/qemu/qemu_process.c b/src/qemu/qemu_process.c index 57c06c7c15..9950461810 100644 --- a/src/qemu/qemu_process.c +++ b/src/qemu/qemu_process.c @@ -1771,7 +1771,7 @@ qemuProcessInitMonitor(virQEMUDriverPtr driver, static int qemuConnectMonitor(virQEMUDriverPtr driver, virDomainObjPtr vm, int asyncJob, - qemuDomainLogContextPtr logCtxt) + bool retry, qemuDomainLogContextPtr logCtxt) { qemuDomainObjPrivatePtr priv = vm->privateData; qemuMonitorPtr mon = NULL; @@ -1799,6 +1799,7 @@ qemuConnectMonitor(virQEMUDriverPtr driver, virDomainObjPtr vm, int asyncJob, mon = qemuMonitorOpen(vm, priv->monConfig, priv->monJSON, + retry, timeout, &monitorCallbacks, driver); @@ -2174,17 +2175,23 @@ qemuProcessWaitForMonitor(virQEMUDriverPtr driver, { int ret = -1; virHashTablePtr info = NULL; - qemuDomainObjPrivatePtr priv; + qemuDomainObjPrivatePtr priv = vm->privateData; + bool retry = true; + + if (priv->qemuCaps && + virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CHARDEV_FD_PASS)) + retry = false; - VIR_DEBUG("Connect monitor to %p '%s'", vm, vm->def->name); - if (qemuConnectMonitor(driver, vm, asyncJob, logCtxt) < 0) + VIR_DEBUG("Connect monitor to vm=%p name='%s' retry=%d", + vm, vm->def->name, retry); + + if (qemuConnectMonitor(driver, vm, asyncJob, retry, logCtxt) < 0) goto cleanup; /* Try to get the pty path mappings again via the monitor. This is much more * reliable if it's available. * Note that the monitor itself can be on a pty, so we still need to try the * log output method. */ - priv = vm->privateData; if (qemuDomainObjEnterMonitorAsync(driver, vm, asyncJob) < 0) goto cleanup; ret = qemuMonitorGetChardevInfo(priv->mon, &info); @@ -7267,6 +7274,7 @@ qemuProcessReconnect(void *opaque) unsigned int stopFlags = 0; bool jobStarted = false; virCapsPtr caps = NULL; + bool retry = true; VIR_FREE(data); @@ -7297,10 +7305,15 @@ qemuProcessReconnect(void *opaque) * allowReboot in status XML and we need to initialize it. */ qemuProcessPrepareAllowReboot(obj); - VIR_DEBUG("Reconnect monitor to %p '%s'", obj, obj->def->name); + if (priv->qemuCaps && + virQEMUCapsGet(priv->qemuCaps, QEMU_CAPS_CHARDEV_FD_PASS)) + retry = false; + + VIR_DEBUG("Reconnect monitor to def=%p name='%s' retry=%d", + obj, obj->def->name, retry); /* XXX check PID liveliness & EXE path */ - if (qemuConnectMonitor(driver, obj, QEMU_ASYNC_JOB_NONE, NULL) < 0) + if (qemuConnectMonitor(driver, obj, QEMU_ASYNC_JOB_NONE, retry, NULL) < 0) goto error; if (qemuHostdevUpdateActiveDomainDevices(driver, obj->def) < 0) diff --git a/tests/qemumonitortestutils.c b/tests/qemumonitortestutils.c index 5e30fb067c..bd15e16598 100644 --- a/tests/qemumonitortestutils.c +++ b/tests/qemumonitortestutils.c @@ -1174,6 +1174,7 @@ qemuMonitorTestNew(bool json, if (!(test->mon = qemuMonitorOpen(test->vm, &src, json, + true, 0, &qemuMonitorTestCallbacks, driver))) -- 2.14.3