7:17 a.m.
Hi,
Getting the following error when running "wbemcli ei" command
[root@linux1b01 lib]# wbemcli ei
https://usr:passwd@localhost:5989/root/virt:Xen_ComputerSystem
*
* wbemcli: Cim: (1) CIM_ERR_FAILED: For provider Virt_ComputerSystem the library name was
empty. Check provider registered location.
*
The modules are registered properly with the CIMOM. However the above error refers to the
provider registered location.
All the packages were installed successfully without any errors.
Any help is much appreciated.
Regards,
Sandeep
Following is the setup details -
[root@linux1b01 lib]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.2 (Tikanga) Kernel \r on an \m
[root@linux1b01 lib]# uname -a
Linux linux1b01.vse.adapps.hp.com 2.6.18-92.el5xen #1 SMP Tue Apr 29 13:31:30 ED
T 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@linux1b01 lib]# rpm -q tog-pegasus
tog-pegasus-2.7.0-2.el5
[root@linux1b01 lib]# rpm -q sblim-cmpi-base
sblim-cmpi-base-1.5.5-31.el5
[root@linux1b01 lib]# rpm -q libcmpiutil
libcmpiutil-0.4-1
[root@linux1b01 lib]# rpm -q libvirt-cim
libvirt-cim-0.4-1
[root@linux1b01 lib]# cimprovider -l -s
MODULE STATUS
OperatingSystemModule OK
ComputerSystemModule OK
ProcessModule OK
Virt_AllocationCapabilities OK
Virt_ComputerSystem OK
Virt_ComputerSystemIndication OK
Virt_ComputerSystemMigrationIndication OK
Virt_Device OK
Virt_DevicePool OK
Virt_ElementAllocatedFromPool OK
Virt_ElementCapabilities OK
Virt_ElementConformsToProfile OK
Virt_ElementSettingData OK
Virt_EnabledLogicalElementCapabilities OK
Virt_HostedDependency OK
Virt_HostedResourcePool OK
Virt_HostedService OK
Virt_HostSystem OK
Virt_RASD OK
Virt_ReferencedProfile OK
Virt_RegisteredProfile OK
Virt_ResourceAllocationFromPool OK
Virt_ResourcePoolConfigurationCapabilities OK
Virt_ResourcePoolConfigurationService OK
Virt_SettingsDefineCapabilities OK
Virt_SettingsDefineState OK
Virt_SystemDevice OK
Virt_VirtualSystemManagementCapabilities OK
Virt_VirtualSystemManagementService OK
Virt_VirtualSystemSnapshotService OK
Virt_VirtualSystemSnapshotServiceCapabilities OK
Virt_VSMigrationCapabilities OK
Virt_VSMigrationService OK
Virt_VSMigrationSettingData OK
Virt_VSSD OK
Virt_VSSDComponent OK
cmpiOSBase_BaseBoardProvider OK
cmpiOSBase_ComputerSystemProvider OK
cmpiOSBase_CSBaseBoardProvider OK
cmpiOSBase_CSProcessorProvider OK
cmpiOSBase_OperatingSystemProvider OK
cmpiOSBase_OperatingSystemStatisticalDataProvider OK
cmpiOSBase_OperatingSystemStatisticsProvider OK
cmpiOSBase_OSProcessProvider OK
cmpiOSBase_ProcessorProvider OK
cmpiOSBase_RunningOSProvider OK
cmpiOSBase_UnixProcessProvider OK
7:57 a.m.
Can you also provide the information of the following command:
wbemcli ecn http://usr:passwd@localhost:5988/root/virt | grep -w
Xen_ComputerSystem
The above command should give you the record as below, which would mean
that things are registered properly.
localhost:5988/root/virt:Xen_ComputerSystem
Between seems like you are using a very old version of Libvirt-CIM any
specific reason ?
The latest is available @ ftp://libvirt.org/libvirt-cim.
Thanks!!
Subba Rao, Sandeep M (STSD) wrote:
Hi,
Getting the following error when running "wbemcli ei" command
[root@linux1b01 lib]# wbemcli ei
https://usr:passwd@localhost:5989/root/virt:Xen_ComputerSystem
*
* wbemcli: Cim: (1) CIM_ERR_FAILED: For provider Virt_ComputerSystem the library name was
empty. Check provider registered location.
*
The modules are registered properly with the CIMOM. However the above error refers to the
provider registered location.
All the packages were installed successfully without any errors.
Any help is much appreciated.
Regards,
Sandeep
Following is the setup details -
[root@linux1b01 lib]# cat /etc/issue
Red Hat Enterprise Linux Server release 5.2 (Tikanga) Kernel \r on an \m
[root@linux1b01 lib]# uname -a
Linux linux1b01.vse.adapps.hp.com 2.6.18-92.el5xen #1 SMP Tue Apr 29 13:31:30 ED
T 2008 x86_64 x86_64 x86_64 GNU/Linux
[root@linux1b01 lib]# rpm -q tog-pegasus
tog-pegasus-2.7.0-2.el5
[root@linux1b01 lib]# rpm -q sblim-cmpi-base
sblim-cmpi-base-1.5.5-31.el5
[root@linux1b01 lib]# rpm -q libcmpiutil
libcmpiutil-0.4-1
[root@linux1b01 lib]# rpm -q libvirt-cim
libvirt-cim-0.4-1
[root@linux1b01 lib]# cimprovider -l -s
MODULE STATUS
OperatingSystemModule OK
ComputerSystemModule OK
ProcessModule OK
Virt_AllocationCapabilities OK
Virt_ComputerSystem OK
Virt_ComputerSystemIndication OK
Virt_ComputerSystemMigrationIndication OK
Virt_Device OK
Virt_DevicePool OK
Virt_ElementAllocatedFromPool OK
Virt_ElementCapabilities OK
Virt_ElementConformsToProfile OK
Virt_ElementSettingData OK
Virt_EnabledLogicalElementCapabilities OK
Virt_HostedDependency OK
Virt_HostedResourcePool OK
Virt_HostedService OK
Virt_HostSystem OK
Virt_RASD OK
Virt_ReferencedProfile OK
Virt_RegisteredProfile OK
Virt_ResourceAllocationFromPool OK
Virt_ResourcePoolConfigurationCapabilities OK
Virt_ResourcePoolConfigurationService OK
Virt_SettingsDefineCapabilities OK
Virt_SettingsDefineState OK
Virt_SystemDevice OK
Virt_VirtualSystemManagementCapabilities OK
Virt_VirtualSystemManagementService OK
Virt_VirtualSystemSnapshotService OK
Virt_VirtualSystemSnapshotServiceCapabilities OK
Virt_VSMigrationCapabilities OK
Virt_VSMigrationService OK
Virt_VSMigrationSettingData OK
Virt_VSSD OK
Virt_VSSDComponent OK
cmpiOSBase_BaseBoardProvider OK
cmpiOSBase_ComputerSystemProvider OK
cmpiOSBase_CSBaseBoardProvider OK
cmpiOSBase_CSProcessorProvider OK
cmpiOSBase_OperatingSystemProvider OK
cmpiOSBase_OperatingSystemStatisticalDataProvider OK
cmpiOSBase_OperatingSystemStatisticsProvider OK
cmpiOSBase_OSProcessProvider OK
cmpiOSBase_ProcessorProvider OK
cmpiOSBase_RunningOSProvider OK
cmpiOSBase_UnixProcessProvider OK
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
4:49 p.m.
Deepti B Kalakeri wrote:
Can you also provide the information of the following command:
wbemcli ecn http://usr:passwd@localhost:5988/root/virt | grep -w
Xen_ComputerSystem
The above command should give you the record as below, which would mean
that things are registered properly.
localhost:5988/root/virt:Xen_ComputerSystem
Between seems like you are using a very old version of Libvirt-CIM any
specific reason ?
The latest is available @ ftp://libvirt.org/libvirt-cim.
Thanks!!
Subba Rao, Sandeep M (STSD) wrote:
> Hi,
>
> Getting the following error when running "wbemcli ei" command
>
> [root@linux1b01 lib]# wbemcli ei
> https://usr:passwd@localhost:5989/root/virt:Xen_ComputerSystem
> *
> * wbemcli: Cim: (1) CIM_ERR_FAILED: For provider Virt_ComputerSystem
> the library name was empty. Check provider registered location.
This error occurs when Pegasus can't find the provider. libvirt-cim
installs into /usr/lib64/cmpi. You should have a corresponding
/etc/ld.so.conf.d/libvirt-cim.conf that gets installed.
You should be able to run "ldconfig" and then run "ldconfig -p | grep
Virt_ComputerSystem"
The second command should return the location of the Virt_ComputerSystem
provider. It should look like the following:
# ldconfig -p | grep Virt_ComputerSystem
libVirt_ComputerSystemMigrationIndication.so.0 (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystemMigrationIndication.so.0
libVirt_ComputerSystemMigrationIndication.so (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystemMigrationIndication.so
libVirt_ComputerSystemIndication.so.0 (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystemIndication.so.0
libVirt_ComputerSystemIndication.so (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystemIndication.so
libVirt_ComputerSystem.so.0 (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystem.so.0
libVirt_ComputerSystem.so (libc6,x86-64) =>
/usr/lib64/cmpi/libVirt_ComputerSystem.so
If you don't see this, check to make sure
/etc/ld.so.conf.d/libvirt-cim.conf exists.
If you do see this output, but Pegasus still returns an error, then I
would take a look at your Pegasus settings. You can check
/etc/Pegasus/cimserver_plannaed.conf to see if the providerDir option is
set. If it is, add "/usr/lib64/cmpi/" to the list and restart.
> *
>
> The modules are registered properly with the CIMOM. However the above
> error refers to the provider registered location.
> All the packages were installed successfully without any errors.
> Any help is much appreciated.
>
> Regards,
> Sandeep
>
> Following is the setup details -
> [root@linux1b01 lib]# cat /etc/issue
> Red Hat Enterprise Linux Server release 5.2 (Tikanga) Kernel \r on an \m
>
> [root@linux1b01 lib]# uname -a
> Linux linux1b01.vse.adapps.hp.com 2.6.18-92.el5xen #1 SMP Tue Apr 29
> 13:31:30
> ED
> T 2008 x86_64 x86_64 x86_64 GNU/Linux
> [root@linux1b01 lib]# rpm -q tog-pegasus
> tog-pegasus-2.7.0-2.el5
> [root@linux1b01 lib]# rpm -q sblim-cmpi-base
> sblim-cmpi-base-1.5.5-31.el5
> [root@linux1b01 lib]# rpm -q libcmpiutil
> libcmpiutil-0.4-1
> [root@linux1b01 lib]# rpm -q libvirt-cim
> libvirt-cim-0.4-1
> [root@linux1b01 lib]# cimprovider -l -s
> MODULE STATUS
> OperatingSystemModule OK
> ComputerSystemModule OK
> ProcessModule OK
> Virt_AllocationCapabilities OK
> Virt_ComputerSystem OK
> Virt_ComputerSystemIndication OK
> Virt_ComputerSystemMigrationIndication OK
> Virt_Device OK
> Virt_DevicePool OK
> Virt_ElementAllocatedFromPool OK
> Virt_ElementCapabilities OK
> Virt_ElementConformsToProfile OK
> Virt_ElementSettingData OK
> Virt_EnabledLogicalElementCapabilities OK
> Virt_HostedDependency OK
> Virt_HostedResourcePool OK
> Virt_HostedService OK
> Virt_HostSystem OK
> Virt_RASD OK
> Virt_ReferencedProfile OK
> Virt_RegisteredProfile OK
> Virt_ResourceAllocationFromPool OK
> Virt_ResourcePoolConfigurationCapabilities OK
> Virt_ResourcePoolConfigurationService OK
> Virt_SettingsDefineCapabilities OK
> Virt_SettingsDefineState OK
> Virt_SystemDevice OK
> Virt_VirtualSystemManagementCapabilities OK
> Virt_VirtualSystemManagementService OK
> Virt_VirtualSystemSnapshotService OK
> Virt_VirtualSystemSnapshotServiceCapabilities OK
> Virt_VSMigrationCapabilities OK
> Virt_VSMigrationService OK
> Virt_VSMigrationSettingData OK
> Virt_VSSD OK
> Virt_VSSDComponent OK
> cmpiOSBase_BaseBoardProvider OK
> cmpiOSBase_ComputerSystemProvider OK
> cmpiOSBase_CSBaseBoardProvider OK
> cmpiOSBase_CSProcessorProvider OK
> cmpiOSBase_OperatingSystemProvider OK
> cmpiOSBase_OperatingSystemStatisticalDataProvider OK
> cmpiOSBase_OperatingSystemStatisticsProvider OK
> cmpiOSBase_OSProcessProvider OK
> cmpiOSBase_ProcessorProvider OK
> cmpiOSBase_RunningOSProvider OK
> cmpiOSBase_UnixProcessProvider OK
>
> _______________________________________________
> Libvirt-cim mailing list
> Libvirt-cim(a)redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-cim
>
5450
days inactive
5450
days old
2 comments
3 participants
participants (3)
-
Deepti B Kalakeri -
Kaitlin Rupert -
Subba Rao, Sandeep M (STSD)