Re: [Libvirt-cim] Request for all in one instllation page

Thanks for your reply. Currently, WBEM Client works for getting CIM_OperatingSystem. But not for getting KVM_ComputerSystem. (I attach the wbemcli output.) ======================================================================== [root@localhost ~]# wbemcli ei 'http://user:pass@localhost:5988/root/cimv2:cim_operatingsystem' localhost:5988/root/cimv2:PG_OperatingSystem.CreationClassName="CIM_OperatingSystem",CSCreationClassName="CIM_UnitaryComputerSystem", CSName="localhost.localdomain",Name="Fedora" CSCreationClassName="CIM_UnitaryComputerSystem",CSName="localhost.localdomain", CreationClassName="CIM_OperatingSystem",Name="Fedora",Caption="Fedora release 9.92 (Rawhide)",Description="Fedora release 9.92 (Rawhide)", Status="Unknown",OSType=36,OtherTypeDescription="2.6.27.3-27.rc1.fc10.i686.PAE #1 SMP Sat Oct 18 20:27:11 EDT 2008",Version="2.6.27.3-27.rc1.fc10.i686.PAE", LastBootUpTime=20081022122916.000000+540,LocalDateTime=20081022171753.000000+540,CurrentTimeZone=540,NumberOfLicensedUsers=0,NumberOfUsers=5,NumberOfProcesses=166, MaxNumberOfProcesses=196608,TotalSwapSpaceSize=4095992,TotalVirtualMemorySize=8233000,FreeVirtualMemory=4095992,FreePhysicalMemory=3384328,TotalVisibleMemorySize=4137008, MaxProcessMemorySize=4095992,Distributed=FALSE,MaxProcessesPerUser=196608,SystemUpTime=17317,OperatingSystemCapability="32 bit" [root@localhost ~]# wbemcli ein http://user:pass@localhost:5988/root/virt:KVM_ComputerSystem * * wbemcli: Cim: (5) CIM_ERR_INVALID_CLASS: KVM_ComputerSystem * ======================================================================== Anyway cimxxxxx shows Virt_xxx class. (I attach the "cimprovider -l" output.) ======================================================================== [root@localhost ~]# cimprovider -l OperatingSystemModule ComputerSystemModule ProcessModule Virt_AllocationCapabilities Virt_ComputerSystem Virt_ComputerSystemIndication Virt_ComputerSystemMigrationIndication Virt_ConcreteComponent Virt_ConsoleRedirectionService Virt_ConsoleRedirectionServiceCapabilities Virt_Device Virt_DevicePool Virt_ElementAllocatedFromPool Virt_ElementCapabilities Virt_ElementConformsToProfile Virt_ElementSettingData Virt_EnabledLogicalElementCapabilities Virt_HostedDependency Virt_HostedResourcePool Virt_HostedService Virt_HostSystem Virt_RASD Virt_ReferencedProfile Virt_RegisteredProfile Virt_ResourceAllocationFromPool Virt_ResourcePoolConfigurationCapabilities Virt_ResourcePoolConfigurationService Virt_ServiceAffectsElement Virt_SettingsDefineCapabilities Virt_SettingsDefineState Virt_SystemDevice Virt_VirtualSystemManagementCapabilities Virt_VirtualSystemManagementService Virt_VirtualSystemSnapshotService Virt_VirtualSystemSnapshotServiceCapabilities Virt_VSMigrationCapabilities Virt_VSMigrationService Virt_VSMigrationSettingData Virt_VSSD Virt_VSSDComponent ======================================================================== > From these, I guess libvirt-cim provider is not connected properly. Would you give me an advice to investigate it. Thanks Toshifumi Fujimura. > > > Kaitlin Rupert wrote: >> Toshifumi Fujimura wrote: >>> I think I've registerd Libvirt-CIM and Libcmputil as CIM Provider. >>> >>> I re-installed Libvirt-CIM package. >>> And I made sure that with Pegasus's command "cimprovider -s -l". >> >> You can check to make sure the providers are properly installed by >> running the following command. Replace user:pass with the username >> and password of the user that has CIM query rights. >> >> The convention is to use the root user or the pegasus user, but you >> can use any user since you've modified /etc/Pegasus/access.conf to >> allow all users. >> >> wbemcli ein >> http://user:pass@localhost:5988/root/virt:KVM_ComputerSystem >> >> This should return something like the following: >> >> localhost:5988/root/virt:KVM_ComputerSystem.CreationClassName="KVM_ComputerSystem",Name="demo2" >> >> >> When you run cimtest, you'll need to run the command as root and >> pass in the root username / password (this will need to be fixed in >> the future). >> >> CIM_NS=root/virt CIM_USER=root CIM_PASS=pass ./runtests libvirt-cim >> -i localhost -d -v KVM >> >>> >>> But following error messages didn't disappear. >>> ============================================================== >>> -------------------------------------------------------------------- >>> AllocationCapabilities - 01_enum.py: FAIL >>> ERROR - Failed to enumerate the class of >>> KVM_AllocationCapabilities >>> ERROR - Unauthorized >>> ERROR - Only 0 pools returned, expected at least 4 >>> -------------------------------------------------------------------- >>> AllocationCapabilities - 02_alloccap_gi_errs.py: FAIL >>> ERROR - AuthError : Unauthorized >>> Traceback (most recent call last): >>> File "./lib/XenKvmLib/const.py", line 116, in do_try >>> File "02_alloccap_gi_errs.py", line 109, in main >>> expr_values=exp['invalid_keyvalue'], bug_no="") >>> File "./lib/XenKvmLib/common_util.py", line 264, in try_getinstance >>> File "/usr/lib/python2.5/site-packages/pywbem/cim_operations.py", >>> line 464, in GetInstance >>> **params) >>> File "/usr/lib/python2.5/site-packages/pywbem/cim_operations.py", >>> line 181, in imethodcall >>> verify_callback = self.verify_callback) >>> File "/usr/lib/python2.5/site-packages/pywbem/cim_http.py", line >>> 226, in wbem_request >>> raise AuthError(response.reason) >>> AuthError: Unauthorized >>> ERROR - None >>> -------------------------------------------------------------------- >>> ============================================================== >>> Would you have any more suggestion of this messages? >> >> This error is because pywbem is unable to authenticate with >> Pegasus. Be sure the following query works (change pass to the >> proper password): >> >> wbemcli ein >> http://root:pass@localhost:5988/root/virt:KVM_ComputerSystem >> >> Hope this helps! =) >> > You can also verify if the required providers are installed by using > the following query: > > wbemcli ecn http://root:pass@localhost:5988/root/virt > > The above query will report all the providers registered with the > /root/virt namespace. > you can use the same query replacing the above /root/virt with other > namespace like /root/interop to know the providers registered in that > particular namespace. > > Regards, > Deepti. > > _______________________________________________ > Libvirt-cim mailing list > Libvirt-cim(a)redhat.com > https://www.redhat.com/mailman/listinfo/libvirt-cim > >