1:11 a.m.
Right now the spec file is completely tied to tog-pegasus,
this should allow the spec file to be compatible with sblim-sfcb
too. This also switches to systemctl which is now used in Fedora.
I would actually like some feedback on the patch if someone
has an environment to test with sblim-sfcb
Also I noted that if I built the package with sblim-sfcb installed
it failed in the make install phase with the following error:
----------------------------------------------------------
/bin/sh /u/veillard/rpms/BUILD/libvirt-cim-0.6.1/install-sh -c -m 644 -t
"/u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim"
./schema/RegisteredProfile.registration
./schema/ElementConformsToProfile.registration
./schema/ReferencedProfile.registration
if [[ sfcb != pegasus ]]; then \
sed -i '/^# --/,/^# --!/d'
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/RegisteredProfile.registration
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/ElementConformsToProfile.registration
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/ReferencedProfile.registration;
\
fi
sed: can't read
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/RegisteredProfile.registration:
No such file or directory
sed: can't read
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/ElementConformsToProfile.registration:
No such file or directory
sed: can't read
.//u/veillard/rpms/BUILDROOT/libvirt-cim-0.6.1-2.fc18.x86_64/usr/share/libvirt-cim/ReferencedProfile.registration:
No such file or directory
make[2]: *** [install-data-local] Error 2
make[2]: Leaving directory `/home/veillard/rpms/BUILD/libvirt-cim-0.6.1'
make[1]: *** [install-am] Error 2
make[1]: Leaving directory `/home/veillard/rpms/BUILD/libvirt-cim-0.6.1'
make: *** [install-recursive] Error 1
----------------------------------------------------------
Any idea ?
thanks,
Daniel
--- libvirt-cim.spec 2012-02-10 13:49:31.679905149 +0800
+++ libvirt-cim.spec 2012-03-09 14:41:45.617781910 +0800
@@ -12,7 +12,8 @@
Requires: libxml2 >= 2.6.0
Requires: libvirt >= 0.9.0
Requires: unzip
-Requires: tog-pegasus
+# either tog-pegasus or sblim-sfcb should provide cim-server
+Requires: cim-server
BuildRequires: libcmpiutil >= 0.5.4
BuildRequires: tog-pegasus-devel
BuildRequires: libvirt-devel >= 0.9.0
@@ -85,8 +86,18 @@
%{_datadir}/%{name}/install_base_schema.sh %{_datadir}/%{name}
-/etc/init.d/tog-pegasus condrestart
+if [ "`systemctl is-active tog-pegasus.service`" = "active" ]
+then
+ systemctl restart tog-pegasus.service
+fi
+
+if [ "`systemctl is-active sblim-sfcb.service`" = "active" ]
+then
+ systemctl restart sblim-sfcb.service
+fi
+if [ -x /usr/sbin/cimserver ]
+then
%{_datadir}/%{name}/provider-register.sh -t pegasus \
-n root/virt \
-r %{REGISTRATION} -m %{SCHEMA} >/dev/null 2>&1 || true
@@ -102,8 +113,29 @@
%{_datadir}/%{name}/provider-register.sh -t pegasus \
-n root/cimv2\
-r %{CIMV2_REG} -m %{CIMV2_MOF} -v >/dev/null 2>&1 || true
+fi
+if [ -x /usr/sbin/sfcbd ]
+then
+%{_datadir}/%{name}/provider-register.sh -t sfcb \
+ -n root/virt \
+ -r %{REGISTRATION} -m %{SCHEMA} >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -t sfcb \
+ -n root/virt \
+ -r %{REGISTRATION} -m %{SCHEMA} >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -t sfcb \
+ -n root/interop \
+ -r %{INTEROP_REG} -m %{INTEROP_MOF} -v >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -t sfcb \
+ -n root/PG_InterOp \
+ -r %{PGINTEROP_REG} -m %{PGINTEROP_MOF} -v >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -t sfcb \
+ -n root/cimv2\
+ -r %{CIMV2_REG} -m %{CIMV2_MOF} -v >/dev/null 2>&1 || true
+fi
%preun
+if [ -x /usr/sbin/cimserver ]
+then
%{_datadir}/%{name}/provider-register.sh -d -t pegasus \
-n root/virt \
-r %{REGISTRATION} -m %{SCHEMA} >/dev/null 2>&1 || true
@@ -116,6 +148,22 @@
%{_datadir}/%{name}/provider-register.sh -d -t pegasus \
-n root/cimv2 \
-r %{CIMV2_REG} -m %{CIMV2_MOF} >/dev/null 2>&1 || true
+fi
+if [ -x /usr/sbin/sfcbd ]
+then
+%{_datadir}/%{name}/provider-register.sh -d -t sfcb \
+ -n root/virt \
+ -r %{REGISTRATION} -m %{SCHEMA} >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -d -t sfcb \
+ -n root/interop \
+ -r %{INTEROP_REG} -m %{INTEROP_MOF} >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -d -t sfcb \
+ -n root/PG_InterOp \
+ -r %{PGINTEROP_REG} -m %{PGINTEROP_MOF} >/dev/null 2>&1 || true
+%{_datadir}/%{name}/provider-register.sh -d -t sfcb \
+ -n root/cimv2 \
+ -r %{CIMV2_REG} -m %{CIMV2_MOF} >/dev/null 2>&1 || true
+fi
%postun -p /sbin/ldconfig
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
2:32 a.m.
Daniel,
thanks for the patch.
* Daniel Veillard <veillard(a)redhat.com> [Mar 09. 2012 08:12]:
Right now the spec file is completely tied to tog-pegasus,
this should allow the spec file to be compatible with sblim-sfcb
too. This also switches to systemctl which is now used in Fedora.
I would actually like some feedback on the patch if someone
has an environment to test with sblim-sfcb
I'll test later today.
For reference, you might want to take a look at the spec file of
https://build.opensuse.org/package/files?package=libvirt-cim&project=...
which is a pure-sfcb variant.
Also I noted that if I built the package with sblim-sfcb installed
it failed in the make install phase with the following error:
Thats a bug in the Makefile.am which does an incomplete substitution -
patch attached.
Regards,
Klaus
---
SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG
Nürnberg)
Maxfeldstraße 5, 90409 Nürnberg, Germany
4:18 a.m.
On Fri, Mar 09, 2012 at 09:32:58AM +0100, Klaus Kaempf wrote:
Daniel,
thanks for the patch.
* Daniel Veillard <veillard(a)redhat.com> [Mar 09. 2012 08:12]:
> Right now the spec file is completely tied to tog-pegasus,
> this should allow the spec file to be compatible with sblim-sfcb
> too. This also switches to systemctl which is now used in Fedora.
>
> I would actually like some feedback on the patch if someone
> has an environment to test with sblim-sfcb
I'll test later today.
For reference, you might want to take a look at the spec file of
https://build.opensuse.org/package/files?package=libvirt-cim&project=...
which is a pure-sfcb variant.
>
> Also I noted that if I built the package with sblim-sfcb installed
> it failed in the make install phase with the following error:
Thats a bug in the Makefile.am which does an incomplete substitution -
patch attached.
Hi Klaus,
thanks for the patch, indeed it fixes the problem! I'm not sure what
you are trying to fix in provider-reg.patch, but it seems to make sense
to really pass them as 3 separate args instead of one big one.
I think the biggest difference I can spot between the two spec files
are the fact that you uninstall only the main schemas on %preun while
we remove all the ones we registered in %post. Not really significant
but I could have overlooked something :-)
Chip, eduardo, could you look at those 3 paches ? Mine, the one
that Klaus sent and
https://build.opensuse.org/package/view_file?file=provider-reg.patch&...
thanks again !
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
12:04 p.m.
On 03/12/2012 06:18 AM, Daniel Veillard wrote:
On Fri, Mar 09, 2012 at 09:32:58AM +0100, Klaus Kaempf wrote:
> Daniel,
>
> thanks for the patch.
>
> * Daniel Veillard <veillard(a)redhat.com> [Mar 09. 2012 08:12]:
>> Right now the spec file is completely tied to tog-pegasus,
>> this should allow the spec file to be compatible with sblim-sfcb
>> too. This also switches to systemctl which is now used in Fedora.
>>
>> I would actually like some feedback on the patch if someone
>> has an environment to test with sblim-sfcb
>
> I'll test later today.
> For reference, you might want to take a look at the spec file of
>
https://build.opensuse.org/package/files?package=libvirt-cim&project=...
> which is a pure-sfcb variant.
>
>>
>> Also I noted that if I built the package with sblim-sfcb installed
>> it failed in the make install phase with the following error:
>
> Thats a bug in the Makefile.am which does an incomplete substitution -
> patch attached.
Hi Klaus,
thanks for the patch, indeed it fixes the problem! I'm not sure what
you are trying to fix in provider-reg.patch, but it seems to make sense
to really pass them as 3 separate args instead of one big one.
I think the biggest difference I can spot between the two spec files
are the fact that you uninstall only the main schemas on %preun while
we remove all the ones we registered in %post. Not really significant
but I could have overlooked something :-)
Chip, eduardo, could you look at those 3 paches ? Mine, the one
that Klaus sent and
https://build.opensuse.org/package/view_file?file=provider-reg.patch&...
The problem is that the patch for the spec file actually does not apply,
can you resend it against .spec.in, instead of .spec?
Anyway, I don't have much to say here, because I am not running with
sblim-sfcb in my envioronment. I tested with pegasus and things still
work fine.
Second patch is also tested and works, but I don't see a reason for that
third patch. What is the error it intends to fix?
Best regards, Eduardo
thanks again !
Daniel
--
Eduardo de Barros Lima
Software Engineer, Open Virtualization
Linux Technology Center - IBM/Brazil
eblima(a)br.ibm.com
2:45 a.m.
On Fri, Mar 09, 2012 at 09:32:58AM +0100, Klaus Kaempf wrote:
Daniel,
thanks for the patch.
* Daniel Veillard <veillard(a)redhat.com> [Mar 09. 2012 08:12]:
> Right now the spec file is completely tied to tog-pegasus,
> this should allow the spec file to be compatible with sblim-sfcb
> too. This also switches to systemctl which is now used in Fedora.
>
> I would actually like some feedback on the patch if someone
> has an environment to test with sblim-sfcb
I'll test later today.
For reference, you might want to take a look at the spec file of
https://build.opensuse.org/package/files?package=libvirt-cim&project=...
which is a pure-sfcb variant.
>
> Also I noted that if I built the package with sblim-sfcb installed
> it failed in the make install phase with the following error:
Thats a bug in the Makefile.am which does an incomplete substitution -
patch attached.
Ping, I'm raising this again, can we apply the patch from Klaus ?
thanks !
Daniel
Regards,
Klaus
---
SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG
Nürnberg)
Maxfeldstraße 5, 90409 Nürnberg, Germany
diff -wruN -x '*~' ../orig-libvirt-cim-0.6.1/Makefile.am
./Makefile.am
--- ../orig-libvirt-cim-0.6.1/Makefile.am 2012-02-08 14:23:43.000000000 +0100
+++ ./Makefile.am 2012-02-09 16:45:16.000000000 +0100
@@ -189,7 +189,7 @@
$(install_sh_DATA) -t "$(DESTDIR)$(pkgdatadir)" $(INTEROP_MOFS)
$(install_sh_DATA) -t "$(DESTDIR)$(pkgdatadir)" $(INTEROP_REGS)
if [[ @CIMSERVER@ != pegasus ]]; then \
- sed -i '/^# --/,/^# --!/d' $(subst schema,$(DESTDIR)$(pkgdatadir),
$(PGINTEROP_REGS)); \
+ sed -i '/^# --/,/^# --!/d' $(subst ./schema,$(DESTDIR)$(pkgdatadir),
$(PGINTEROP_REGS)); \
fi
uninstall-local:
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
1:37 a.m.
On Fri, Mar 09, 2012 at 09:32:58AM +0100, Klaus Kaempf wrote:
Daniel,
thanks for the patch.
* Daniel Veillard <veillard(a)redhat.com> [Mar 09. 2012 08:12]:
> Right now the spec file is completely tied to tog-pegasus,
> this should allow the spec file to be compatible with sblim-sfcb
> too. This also switches to systemctl which is now used in Fedora.
>
> I would actually like some feedback on the patch if someone
> has an environment to test with sblim-sfcb
I'll test later today.
For reference, you might want to take a look at the spec file of
https://build.opensuse.org/package/files?package=libvirt-cim&project=...
which is a pure-sfcb variant.
>
> Also I noted that if I built the package with sblim-sfcb installed
> it failed in the make install phase with the following error:
Thats a bug in the Makefile.am which does an incomplete substitution -
patch attached.
Regards,
Klaus
---
SUSE LINUX Products GmbH, GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer, HRB 16746 (AG
Nürnberg)
Maxfeldstraße 5, 90409 Nürnberg, Germany
diff -wruN -x '*~' ../orig-libvirt-cim-0.6.1/Makefile.am
./Makefile.am
--- ../orig-libvirt-cim-0.6.1/Makefile.am 2012-02-08 14:23:43.000000000 +0100
+++ ./Makefile.am 2012-02-09 16:45:16.000000000 +0100
@@ -189,7 +189,7 @@
$(install_sh_DATA) -t "$(DESTDIR)$(pkgdatadir)" $(INTEROP_MOFS)
$(install_sh_DATA) -t "$(DESTDIR)$(pkgdatadir)" $(INTEROP_REGS)
if [[ @CIMSERVER@ != pegasus ]]; then \
- sed -i '/^# --/,/^# --!/d' $(subst schema,$(DESTDIR)$(pkgdatadir),
$(PGINTEROP_REGS)); \
+ sed -i '/^# --/,/^# --!/d' $(subst ./schema,$(DESTDIR)$(pkgdatadir),
$(PGINTEROP_REGS)); \
fi
uninstall-local:
Okay, I also pushed Klaus' patch today,
Daniel
--
Daniel Veillard | libxml Gnome XML XSLT toolkit http://xmlsoft.org/
daniel(a)veillard.com | Rpmfind RPM search engine http://rpmfind.net/
http://veillard.com/ | virtualization library http://libvirt.org/
4547
days inactive
4670
days old
5 comments
3 participants
participants (3)
-
Daniel Veillard -
Eduardo Lima (Etrunko) -
Klaus Kaempf