10 a.m.
Hello,
I am trying to setup latest libvirt-cim in RHEL 5.2 with Pegasus server
2.8.0-1. I am using libvirt-cim source snapshot dated 01/13/09 obtained
from ftp://libvirt.org/libvirt/CIM/ .
Following the README in the source, the 'make postinstall' step fails with
the following error.
Processing provider modules: Virt_AllocationCapabilities
Virt_ComputerSystem Virt_ComputerSystemIndication
Virt_ComputerSystemMigrationIndication Virt_ConcreteComponent
Virt_ConsoleRedirectionService Virt_ConsoleRedirectionServiceCapabilities
Virt_Device Virt_DevicePool Virt_ElementAllocatedFromPool
Virt_ElementCapabilities Virt_ElementConformsToProfile
Virt_ElementSettingData Virt_EnabledLogicalElementCapabilities
Virt_HostedAccessPoint Virt_HostedDependency Virt_HostedResourcePool
Virt_HostedService Virt_HostSystem Virt_KVMRedirectionSAP Virt_RASD
Virt_ResourceAllocationFromPool Virt_ResourcePoolConfigurationCapabilities
Virt_ResourcePoolConfigurationService Virt_SAPAvailableForElement
Virt_ServiceAccessBySAP Virt_ServiceAffectsElement
Virt_SettingsDefineCapabilities Virt_SettingsDefineState Virt_SystemDevice
Virt_VirtualSystemManagementCapabilities
Virt_VirtualSystemManagementService Virt_VirtualSystemSnapshotService
Virt_VirtualSystemSnapshotServiceCapabilities Virt_VSMigrationCapabilities
Virt_VSMigrationService Virt_VSMigrationSettingData Virt_VSSD
Virt_VSSDComponent
Registering providers with active cimserver
Parsing error: parse error: Could not find declaration for Qualifier named
ASSOCIATION
make: *** [postinstall] Error 250
Any ideas?
Thanks
Gopal
11:57 a.m.
U Gopalakrishnan wrote:
Hello,
I am trying to setup latest libvirt-cim in RHEL 5.2 with Pegasus server
2.8.0-1. I am using libvirt-cim source snapshot dated 01/13/09 obtained
from ftp://libvirt.org/libvirt/CIM/ .
Following the README in the source, the 'make postinstall' step fails
with the following error.
Registering providers with active cimserver
Parsing error: parse error: Could not find declaration for Qualifier
named ASSOCIATION
make: *** [postinstall] Error 250
Hi Gopal,
This error looks like the Pegasus repository isn't setup properly.
Before running make postinstall, did you run "make preinstall"? After
running make preinstall, you'll need to restart Pegasus.
Not sure if you've looked at this, but there's some instructions at:
http://wiki.libvirt.org/page/Libvirt-cim_setup
Let us know if this doesn't resolve the issue.
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
3:25 a.m.
Hi Kaitlin,
I followed the instructions in the wiki, postinstall step is now
completing without a make error. But I see few error messages in the
output. I think most of them are harmless and is because the postinstall
step is run multiple times.
But one particular error message given below is worrying me.
Parsing error: parse error: Error adding class Xen_HostedResourcePool to
the repository: CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool
The complete output from the 'make postinstall' command is attached.
Please advise on whether these error messages needs to be looked into or
could be safely ignored.
Also, the README contained in the source tar.gz files found at
ftp://libvirt.org/libvirt/CIM/ seems to be outdated, e.g. it didn't
mention about the make preinstall step. May be README could just give a
link to the wiki page which seems to be current.
Thanks
Gopal
Kaitlin Rupert <kaitlin(a)linux.vnet.ibm.com>
Sent by: libvirt-cim-bounces(a)redhat.com
01/14/2009 23:27
Please respond to
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
To
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
cc
Subject
Re: [Libvirt-cim] 'Parsing error' during make postinstall step of
installing libvirt-cim
U Gopalakrishnan wrote:
Hello,
I am trying to setup latest libvirt-cim in RHEL 5.2 with Pegasus server
2.8.0-1. I am using libvirt-cim source snapshot dated 01/13/09 obtained
from ftp://libvirt.org/libvirt/CIM/ .
Following the README in the source, the 'make postinstall' step fails
with the following error.
Registering providers with active cimserver
Parsing error: parse error: Could not find declaration for Qualifier
named ASSOCIATION
make: *** [postinstall] Error 250
Hi Gopal,
This error looks like the Pegasus repository isn't setup properly.
Before running make postinstall, did you run "make preinstall"? After
running make preinstall, you'll need to restart Pegasus.
Not sure if you've looked at this, but there's some instructions at:
http://wiki.libvirt.org/page/Libvirt-cim_setup
Let us know if this doesn't resolve the issue.
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
2:09 p.m.
But one particular error message given below is worrying me.
Parsing error: parse error: Error adding class Xen_HostedResourcePool to
the repository: CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool
I wasn't able to reproduce this problem using a clean tree and clean
Pegasus repository.
Sounds like the CIM_HostedResourcePool and Xen_HostedResourcePool
classes might not have been added to your repository.
You can verify with the following commands:
To check the root/virt namespace:
wbemcli ecn http://localhost/root/virt:CIM_HostedResourcePool
wbemcli ecn http://localhost/root/virt:Xen_HostedResourcePool
To check the root/cimv2 namespace:
wbemcli ecn http://localhost/root/cimv2:CIM_HostedResourcePool
wbemcli ecn http://localhost/root/cimv2:Xen_HostedResourcePool
If the class isn't found (should look like the output below), you can
try running the following:
1) make preuninstall
2) make preinstall
3) Restart the CIMOM
4) make postinstall
Let us know if the problem persists. Also, let us know which CIMOM you
are using. I tested with Pegasus 2.7.2-2 on an Fedora 10 system.
-----
$ wbemcli ecn http://localhost/root/cimv2:CIM_HostedResourcePool
localhost:5988/root/cimv2:Xen_HostedResourcePool
localhost:5988/root/cimv2:KVM_HostedResourcePool
localhost:5988/root/cimv2:LXC_HostedResourcePool
The complete output from the 'make postinstall' command is attached.
Please advise on whether these error messages needs to be looked into or
could be safely ignored.
Warning: the instance already exists.
In this implementation, that means it cannot be changed.
These message can be ignored. You're correct, this is because make
postinstall was run several times. It means that some of the providers
are already registered properly.
----------
Parsing error: parse error: Error adding class
Virt_VirtualSystemSnapshotService to the repository:
CIM_ERR_CLASS_HAS_CHILDREN: Virt_VirtualSystemSnapshotService
This means the class is already present in the repository. You can
verify using:
$ wbemcli ecn http://localhost/root/virt:Virt_VirtualSystemSnapshotService
localhost:5988/root/virt:KVM_VirtualSystemSnapshotService
localhost:5988/root/virt:Xen_VirtualSystemSnapshotService
localhost:5988/root/virt:LXC_VirtualSystemSnapshotService
-----------
Parsing error: parse error: Error adding class
CIM_VirtualSystemMigrationService to the repository:
CIM_ERR_CLASS_HAS_CHILDREN: CIM_VirtualSystemMigrationService
Same issue here.
Also, the README contained in the source tar.gz files found at
ftp://libvirt.org/libvirt/CIM/ seems to be outdated, e.g. it didn't
mention about the make preinstall step. May be README could just give a
link to the wiki page which seems to be current.
Sounds like the README is out of date. I'll update this information.
Thanks!
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
11:41 p.m.
You can verify with the following commands:
To check the root/virt namespace:
wbemcli ecn http://localhost/root/virt:CIM_HostedResourcePool
localhost:5988/root/virt:LXC_HostedResourcePool
localhost:5988/root/virt:KVM_HostedResourcePool
localhost:5988/root/virt:Xen_HostedResourcePool
localhost:5988/root/virt:CIM_HostedStoragePool
(no output)
To check the root/cimv2 namespace:
wbemcli ecn http://localhost/root/cimv2:CIM_HostedResourcePool
* wbemcli: Cim: (5) CIM_ERR_INVALID_CLASS: CIM_HostedResourcePool
* wbemcli: Cim: (5) CIM_ERR_INVALID_CLASS: Xen_HostedResourcePool
If the class isn't found (should look like the output below), you
can
try running the following:
1) make preuninstall
2) make preinstall
3) Restart the CIMOM
4) make postinstall
Let us know if the problem persists.
I still get CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool. The
complete
make postinstall output is attached.
Also the 'wbemcli ecn ..' command gives the same out as shown above even
after re-running the postinstall.
Also, let us know which CIMOM you
are using. I tested with Pegasus 2.7.2-2 on an Fedora 10 system.
I am running on Pegasus 2.8.0-1 on RHEL 5.2 system.
Thanks
Gopal
4:19 a.m.
U Gopalakrishnan wrote:
> You can verify with the following commands:
> To check the root/virt namespace:
> wbemcli ecn http://localhost/root/virt:CIM_HostedResourcePool
localhost:5988/root/virt:LXC_HostedResourcePool
localhost:5988/root/virt:KVM_HostedResourcePool
localhost:5988/root/virt:Xen_HostedResourcePool
localhost:5988/root/virt:CIM_HostedStoragePool
> wbemcli ecn http://localhost/root/virt:Xen_HostedResourcePool
(no output)
> To check the root/cimv2 namespace:
> wbemcli ecn http://localhost/root/cimv2:CIM_HostedResourcePool
* wbemcli: Cim: (5) CIM_ERR_INVALID_CLASS: CIM_HostedResourcePool
> wbemcli ecn http://localhost/root/cimv2:Xen_HostedResourcePool
* wbemcli: Cim: (5) CIM_ERR_INVALID_CLASS: Xen_HostedResourcePool
> If the class isn't found (should look like the output below), you can
> try running the following:
> 1) make preuninstall
> 2) make preinstall
> 3) Restart the CIMOM
> 4) make postinstall
> Let us know if the problem persists.
I still get CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool. The
completeIn this implementation, that means it cannot be changed.
Warning: the instance already exists.
In this implementation, that means it cannot be changed.
Warning: the instance already exists.
In this implementation, that means it cannot be changed.
Warning: the instance already exists.
In this implementation, that means it cannot be changed.
make postinstall output is attached.
Also the 'wbemcli ecn ..' command gives the same out as shown above
even after re-running the postinstall.
The postinstall log attached to the mail and
the wbemcli ecn command for
the root/cimv2 namespace imply that you do not have the
CIM_HostedResourcePool registered, and hence you are seeing the above
error messages and also in the postinstall o/p.
> Also, let us know which CIMOM you
> are using. I tested with Pegasus 2.7.2-2 on an Fedora 10 system.
I am running on Pegasus 2.8.0-1 on RHEL 5.2 system.
I tried doing a make postinstall today on RHEL5.2 and faced the same
problem. The make preinstall steps did not seem to eliminate the
problem for me as well.
Thanks
Gopal
------------------------------------------------------------------------
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
12:57 p.m.
> If the class isn't found (should look like the output
below), you can
> try running the following:
> 1) make preuninstall
> 2) make preinstall
> 3) Restart the CIMOM
> 4) make postinstall
> Let us know if the problem persists.
I still get CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool. The
complete
make postinstall output is attached.
Also the 'wbemcli ecn ..' command gives the same out as shown above even
after re-running the postinstall.
> Also, let us know which CIMOM you
> are using. I tested with Pegasus 2.7.2-2 on an Fedora 10 system.
I am running on Pegasus 2.8.0-1 on RHEL 5.2 system.
Is your root/cimv2 namespace populated? I'm guessing that
CIM_HostedResourcePool is not added to the root/cimv2 namespace during
the make preinstall because CIM_SystemComponent is not there.
You can check to see if the root/cimv2 namespace is populated by doing
the following:
/var/lib/Pegasus/repository/root#cimv2/classes
You should see a number of classes there. CIM_SystemComponent should be
present there as well.
I uninstalled Pegasus on my RHEL 5.2 system, removed the repository, and
then reinstalled Pegasus. The tog-pegasus-2.7.0-1.el5 rpm populates
root/cimv2.
My guess is your Pegasus install isn't populating the root/cimv2
namespace.
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
10:36 p.m.
You can check to see if the root/cimv2 namespace is populated by
doing
the following:
/var/lib/Pegasus/repository/root#cimv2/classes
You should see a number of classes there. CIM_SystemComponent should
be
present there as well.
I checked by Pegasus installation root/cimv2 is populated and
CIM_SystemComponent class is also present.
Here is the output.
# ls /var/lib/Pegasus/repository/root#cimv2/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
I dont see CIM_HostedResourcePool in root/cimv2. But do see it in
root/virt namespace.
# ls /var/lib/Pegasus/repository/root#virt/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedResourcePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
Thanks
Gopal
11:59 p.m.
U Gopalakrishnan wrote:
> You can check to see if the root/cimv2 namespace is populated by doing
> the following:
> /var/lib/Pegasus/repository/root#cimv2/classes
> You should see a number of classes there. CIM_SystemComponent
should be
> present there as well.
I checked by Pegasus installation root/cimv2 is populated and
CIM_SystemComponent class is also present.
Here is the output.
# ls /var/lib/Pegasus/repository/root#cimv2/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
I dont see CIM_HostedResourcePool in root/cimv2. But do see it in
root/virt namespace.
The CIM_HostedResourcePool needs to be present in the
root/cimv2
namespace as well.
# ls /var/lib/Pegasus/repository/root#virt/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedResourcePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
Thanks
Gopal
Can you
1) unistall the pegasus
2) rm -rf /var/lib/Pegasus/repository,
3) Install the pegasus
4) verify the HostedResourcePool registered in the root/cimv2 namespace
by executing
wbemcli ecn http://root:passwd@localhost/root/cimv2 | grep
CIM_HostedResourcePool
localhost:5988/root/cimv2:CIM_HostedResourcePool
5) then do a make preinstall ,make postinstall.
This should quickly solve the problem for you.
------------------------------------------------------------------------
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
1:21 a.m.
Hi Deepti,
Can you
1) unistall the pegasus
2) rm -rf /var/lib/Pegasus/repository,
3) Install the pegasus
4) verify the HostedResourcePool registered in the root/cimv2 namespace
by executing
wbemcli ecn http://root:passwd@localhost/root/cimv2 | grep
CIM_HostedResourcePool
localhost:5988/root/cimv2:CIM_HostedResourcePool
Re-installed pegasus, and checked for CIM_HostedResourcePool in
root/cimv2.
The class is not registered.
# wbemcli ecn http://root:xxxx@localhost/root/cimv2 | grep
CIM_HostedResourcePool
#
Here is all the SystemComponent classes
# ls /var/lib/Pegasus/repository/root#cimv2/classes | grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
how do we proceed now?
Thanks
Gopal
Deepti B Kalakeri <deeptik(a)linux.vnet.ibm.com>
Sent by: libvirt-cim-bounces(a)redhat.com
01/19/2009 11:29
Please respond to
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
To
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
cc
Subject
Re: [Libvirt-cim] 'Parsing error' during make postinstall step of
installing libvirt-cim
U Gopalakrishnan wrote:
> You can check to see if the root/cimv2 namespace is populated by doing
> the following:
> /var/lib/Pegasus/repository/root#cimv2/classes
> You should see a number of classes there. CIM_SystemComponent
should be
> present there as well.
I checked by Pegasus installation root/cimv2 is populated and
CIM_SystemComponent class is also present.
Here is the output.
# ls /var/lib/Pegasus/repository/root#cimv2/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
I dont see CIM_HostedResourcePool in root/cimv2. But do see it in
root/virt namespace.
The CIM_HostedResourcePool needs to be present in the
root/cimv2
namespace as well.
# ls /var/lib/Pegasus/repository/root#virt/classes |grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedResourcePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
Thanks
Gopal
Can you
1) unistall the pegasus
2) rm -rf /var/lib/Pegasus/repository,
3) Install the pegasus
4) verify the HostedResourcePool registered in the root/cimv2 namespace
by executing
wbemcli ecn http://root:passwd@localhost/root/cimv2 | grep
CIM_HostedResourcePool
localhost:5988/root/cimv2:CIM_HostedResourcePool
5) then do a make preinstall ,make postinstall.
This should quickly solve the problem for you.
------------------------------------------------------------------------
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
1:48 a.m.
U Gopalakrishnan wrote:
Hi Deepti,
> Can you
> 1) unistall the pegasus
> 2) rm -rf /var/lib/Pegasus/repository,
> 3) Install the pegasus
> 4) verify the HostedResourcePool registered in the root/cimv2 namespace
> by executing
> wbemcli ecn http://root:passwd@localhost/root/cimv2 | grep
> CIM_HostedResourcePool
> localhost:5988/root/cimv2:CIM_HostedResourcePool
Re-installed pegasus, and checked for CIM_HostedResourcePool in
root/cimv2.
The class is not registered.
# wbemcli ecn http://root:xxxx@localhost/root/cimv2 | grep
CIM_HostedResourcePool
Oh! I am not sure why Pegasus 2.8.0-1 is not working.
Since Kaitlin was able to work with tog-pegasus-2.7.0-1 version and you
are finding problems with the Pegasus 2.8.0-1 can you try to install the
Pegasus 2.7.0-1 and try.
#
Here is all the SystemComponent classes
# ls /var/lib/Pegasus/repository/root#cimv2/classes | grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
#
how do we proceed now?
Thanks
Gopal
*Deepti B Kalakeri <deeptik(a)linux.vnet.ibm.com>*
Sent by: libvirt-cim-bounces(a)redhat.com
01/19/2009 11:29
Please respond to
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
To
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
cc
Subject
Re: [Libvirt-cim] 'Parsing error' during make postinstall step of
installing libvirt-cim
U Gopalakrishnan wrote:
>
> > You can check to see if the root/cimv2 namespace is populated by doing
> > the following:
>
> > /var/lib/Pegasus/repository/root#cimv2/classes
>
> > You should see a number of classes there. CIM_SystemComponent
> should be
> > present there as well.
>
> I checked by Pegasus installation root/cimv2 is populated and
> CIM_SystemComponent class is also present.
> Here is the output.
>
> # ls /var/lib/Pegasus/repository/root#cimv2/classes |grep
> CIM_SystemComponent
> CIM_AccountOnSystem.CIM_SystemComponent
> CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
> CIM_ASBGPEndpoints.CIM_SystemComponent
> CIM_ComponentCS.CIM_SystemComponent
> CIM_Confederation.CIM_SystemComponent
> CIM_ContainedDomain.CIM_SystemComponent
> CIM_FilterEntryInSystem.CIM_SystemComponent
> CIM_FilterListInSystem.CIM_SystemComponent
> CIM_HostedFileSystem.CIM_SystemComponent
> CIM_HostedStoragePool.CIM_SystemComponent
> CIM_InstalledOS.CIM_SystemComponent
> CIM_J2eeApplicationModule.CIM_SystemComponent
> CIM_J2eeServerInDomain.CIM_SystemComponent
> CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
> CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
> CIM_ResourceOfSystem.CIM_SystemComponent
> CIM_RoutersInAS.CIM_SystemComponent
> CIM_SystemBIOS.CIM_SystemComponent
> CIM_SystemComponent.CIM_Component
> CIM_SystemDevice.CIM_SystemComponent
> #
>
> I dont see CIM_HostedResourcePool in root/cimv2. But do see it in
> root/virt namespace.
The CIM_HostedResourcePool needs to be present in the root/cimv2
namespace as well.
>
> # ls /var/lib/Pegasus/repository/root#virt/classes |grep
> CIM_SystemComponent
> CIM_AccountOnSystem.CIM_SystemComponent
> CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
> CIM_ASBGPEndpoints.CIM_SystemComponent
> CIM_ComponentCS.CIM_SystemComponent
> CIM_Confederation.CIM_SystemComponent
> CIM_ContainedDomain.CIM_SystemComponent
> CIM_FilterEntryInSystem.CIM_SystemComponent
> CIM_FilterListInSystem.CIM_SystemComponent
> CIM_HostedFileSystem.CIM_SystemComponent
> CIM_HostedResourcePool.CIM_SystemComponent
> CIM_InstalledOS.CIM_SystemComponent
> CIM_J2eeApplicationModule.CIM_SystemComponent
> CIM_J2eeServerInDomain.CIM_SystemComponent
> CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
> CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
> CIM_ResourceOfSystem.CIM_SystemComponent
> CIM_RoutersInAS.CIM_SystemComponent
> CIM_SystemBIOS.CIM_SystemComponent
> CIM_SystemComponent.CIM_Component
> CIM_SystemDevice.CIM_SystemComponent
> #
>
> Thanks
> Gopal
Can you
1) unistall the pegasus
2) rm -rf /var/lib/Pegasus/repository,
3) Install the pegasus
4) verify the HostedResourcePool registered in the root/cimv2 namespace
by executing
wbemcli ecn http://root:passwd@localhost/root/cimv2 | grep
CIM_HostedResourcePool
localhost:5988/root/cimv2:CIM_HostedResourcePool
5) then do a make preinstall ,make postinstall.
This should quickly solve the problem for you.
> ------------------------------------------------------------------------
>
> _______________________________________________
> Libvirt-cim mailing list
> Libvirt-cim(a)redhat.com
> https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
------------------------------------------------------------------------
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
--
Thanks and Regards,
Deepti B. Kalakeri
IBM Linux Technology Center
deeptik(a)linux.vnet.ibm.com
4:43 a.m.
Oh! I am not sure why Pegasus 2.8.0-1 is not working.
Since Kaitlin was able to work with tog-pegasus-2.7.0-1 version and you
are finding problems with the Pegasus 2.8.0-1 can you try to install the
Pegasus 2.7.0-1 and try.
I could manage to get only pegasus 2.7.0-2 source. I built it and
installed,
but still don't see CIM_HostedResourcePool class in root/cimv2 namespace
:(
Do you think there could be difference between 2.7.0-2 and 2.7.0-1 that
could be breaking us?
Also do you have a 2.7.0-1 binary/source rpm or source zip?
Thanks
Gopal
9:28 a.m.
U Gopalakrishnan wrote:
> Oh! I am not sure why Pegasus 2.8.0-1 is not working.
> Since Kaitlin was able to work with tog-pegasus-2.7.0-1 version and you
> are finding problems with the Pegasus 2.8.0-1 can you try to install the
> Pegasus 2.7.0-1 and try.
The make preinstall step will add CIM_HostedResourcePool to the
root/cimv2 namespace.
CIM_HostedResourcePool is a subclass of CIM_SystemComponent, so
CIM_SystemComponent needs to be present in the repository before
CIM_HostedResourcePool can be added.
Gopal, after rebuilding the Pegasus repository, have you tried running
"make preinstall" again?
After "make preinstall", be sure to restart Pegasus before running "make
install" and "make postinstall"
I could manage to get only pegasus 2.7.0-2 source. I built it and
installed,
but still don't see CIM_HostedResourcePool class in root/cimv2 namespace :(
Do you think there could be difference between 2.7.0-2 and 2.7.0-1 that
could be breaking us?
I don't think there should be much difference between the versions.
Also do you have a 2.7.0-1 binary/source rpm or source zip?
I am using the Pegasus rpm from the RedHat 5.2 iso.
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
4:25 a.m.
I did a clean install of Pegasus 2.7.0-2 that is shipped with RHEL 5.2 and
followed the libvirt wiki
installation instructions, still see the CIM_ERR_INVALID_SUPERCLASS error
during the post install step.
Parsing error: parse error: Error adding class Xen_HostedResourcePool to
the repository: CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool
I still don't see CIM_HostedResourcePool in root/cimv2 namespace but it is
present in root/virt namespace. I see CIM_SystemComponent class in both
namespaces.
Here is relevant output
# ls /var/lib/Pegasus/repository/root#cimv2/classes | grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedStoragePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
# ls /var/lib/Pegasus/repository/root#virt/classes | grep
CIM_SystemComponent
CIM_AccountOnSystem.CIM_SystemComponent
CIM_ApplicationSystemSoftwareFeature.CIM_SystemComponent
CIM_ASBGPEndpoints.CIM_SystemComponent
CIM_ComponentCS.CIM_SystemComponent
CIM_Confederation.CIM_SystemComponent
CIM_ContainedDomain.CIM_SystemComponent
CIM_FilterEntryInSystem.CIM_SystemComponent
CIM_FilterListInSystem.CIM_SystemComponent
CIM_HostedFileSystem.CIM_SystemComponent
CIM_HostedResourcePool.CIM_SystemComponent
CIM_InstalledOS.CIM_SystemComponent
CIM_J2eeApplicationModule.CIM_SystemComponent
CIM_J2eeServerInDomain.CIM_SystemComponent
CIM_PolicyContainerInPolicyContainer.CIM_SystemComponent
CIM_PolicyRepositoryInPolicyRepository.CIM_SystemComponent
CIM_ResourceOfSystem.CIM_SystemComponent
CIM_RoutersInAS.CIM_SystemComponent
CIM_SystemBIOS.CIM_SystemComponent
CIM_SystemComponent.CIM_Component
CIM_SystemDevice.CIM_SystemComponent
I have captured output form make install and make postinstall. I didn't
notice any thing wrong in the make install output, let me know if you want
to take a look.
Thanks
Gopal
Kaitlin Rupert <kaitlin(a)linux.vnet.ibm.com>
Sent by: libvirt-cim-bounces(a)redhat.com
01/19/2009 20:58
Please respond to
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
To
List for discussion and development of libvirt CIM
<libvirt-cim(a)redhat.com>
cc
Subject
Re: [Libvirt-cim] 'Parsing error' during make postinstall step of
installing libvirt-cim
U Gopalakrishnan wrote:
> Oh! I am not sure why Pegasus 2.8.0-1 is not working.
> Since Kaitlin was able to work with tog-pegasus-2.7.0-1 version and
you
> are finding problems with the Pegasus 2.8.0-1 can you try to
install
the
> Pegasus 2.7.0-1 and try.
The make preinstall step will add CIM_HostedResourcePool to the
root/cimv2 namespace.
CIM_HostedResourcePool is a subclass of CIM_SystemComponent, so
CIM_SystemComponent needs to be present in the repository before
CIM_HostedResourcePool can be added.
Gopal, after rebuilding the Pegasus repository, have you tried running
"make preinstall" again?
After "make preinstall", be sure to restart Pegasus before running "make
install" and "make postinstall"
I could manage to get only pegasus 2.7.0-2 source. I built it and
installed,
but still don't see CIM_HostedResourcePool class in root/cimv2 namespace
:(
Do you think there could be difference between 2.7.0-2 and 2.7.0-1 that
could be breaking us?
I don't think there should be much difference between the versions.
Also do you have a 2.7.0-1 binary/source rpm or source zip?
I am using the Pegasus rpm from the RedHat 5.2 iso.
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
_______________________________________________
Libvirt-cim mailing list
Libvirt-cim(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-cim
1:49 p.m.
U Gopalakrishnan wrote:
I did a clean install of Pegasus 2.7.0-2 that is shipped with RHEL 5.2
and followed the libvirt wiki
installation instructions, still see the CIM_ERR_INVALID_SUPERCLASS
error during the post install step.
Parsing error: parse error: Error adding class Xen_HostedResourcePool to
the repository: CIM_ERR_INVALID_SUPERCLASS: CIM_HostedResourcePool
I still don't see CIM_HostedResourcePool in root/cimv2 namespace but it
is present in root/virt namespace. I see CIM_SystemComponent class in
both namespaces.
Looks like the cimv216-cimv2_mof was missing from the tarball and the
spec file.
I submitted a patch to fix this problem. Thanks for reporting this issue!
--
Kaitlin Rupert
IBM Linux Technology Center
kaitlin(a)linux.vnet.ibm.com
5815
days inactive
5821
days old
14 comments
3 participants
participants (3)
-
Deepti B Kalakeri -
Kaitlin Rupert -
U Gopalakrishnan