10:17 a.m.
Hi,
By adding following lines in a Guest .xml conf file , I'm able to send / receive
datas between host and this guest.
<channel type='pty'>
<target type='virtio'
name='arbitrary.virtio.serial.port.name'/>
<address type='virtio-serial' controller='0' bus='0'
port='1'/>
</channel>
My question is the following :
How may I find to which /dev/pts/x is mapped the source path ( from the host point of
view) ?
I was able to find it by having a look in the virt manager GUI , but I want to do it
programmatically.
I've tried to force it by specifying a source path in the .xml file .... No way
Thx for help.
Regards,
J.P. Ribeauville
P: +33.(0).1.47.17.27.87
Puteaux 3 Etage 5 Bureau 4
jpribeauville@axway.com<mailto:jpribeauville@axway.com>
http://www.axway.com<http://www.axway.com/>
P Pensez à l'environnement avant d'imprimer.
6:58 a.m.
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Dear Jean-Pierre,
Here, at the ReactOS Foundation, we've hit the same issue with our
automated regression testing using KVM (and thus, libvirt).
The solution we use is that we first start the VM and then, we ask
libvirt to dump the VM XML and we parse it to get the pts.
I'm not sure whether that's the most efficient method, but at least,
that's a method that works.
You can have a look at our code which is GPLv2. It is available here:
https://svn.reactos.org/svn/project-tools/trunk/sysreg2/
More specifically, the part where we ask again for the config happens
in kvm.cpp, KVM class, in KVM::GetConsole() function.
I hope it helps. If you need more information, don't hesitate to ask.
Cheers,
On 08/25/2015 05:17 PM, Jean-Pierre Ribeauville wrote:
Hi,
By adding following lines in a Guest .xml conf file , I'm able to
send / receive datas between host and this guest.
<channel type='pty'> <target type='virtio'
name='arbitrary.virtio.serial.port.name'/> <address
type='virtio-serial' controller='0' bus='0' port='1'/>
</channel>
My question is the following :
How may I find to which /dev/pts/x is mapped the source path (
from the host point of view) ? I was able to find it by having a
look in the virt manager GUI , but I want to do it
programmatically.
I've tried to force it by specifying a source path in the .xml file
.... No way
Thx for help.
Regards,
J.P. Ribeauville
P: +33.(0).1.47.17.27.87
Puteaux 3 Etage 5 Bureau 4
jpribeauville@axway.com<mailto:jpribeauville@axway.com>
http://www.axway.com<http://www.axway.com/>
P Pensez à l'environnement avant d'imprimer.
_______________________________________________ libvirt-users
mailing list libvirt-users(a)redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
- --
Pierre Schweitzer <pierre(a)reactos.org>
System & Network Administrator
Senior Kernel Developer
ReactOS Deutschland e.V.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=dpFP
-----END PGP SIGNATURE-----
8:37 a.m.
On Tue, Aug 25, 2015 at 03:17:51PM +0000, Jean-Pierre Ribeauville wrote:
Hi,
By adding following lines in a Guest .xml conf file , I'm able to send / receive
datas between host and this guest.
<channel type='pty'>
<target type='virtio'
name='arbitrary.virtio.serial.port.name'/>
<address type='virtio-serial' controller='0' bus='0'
port='1'/>
</channel>
My question is the following :
How may I find to which /dev/pts/x is mapped the source path ( from the host point of
view) ?
You have to queryy the XML from libvirt after the guest has started,
at which point libvirt will have filled in the dynamically alllocated
pty path.
Honestly, you're probably better off not using type='pty', and
instead use type='unix', which lets you specify an explicit
UNIX domain socket path upfront, avoiding the whole problem.
Regards,
Daniel
--
|: http://berrange.com -o- http://www.flickr.com/photos/dberrange/ :|
|: http://libvirt.org -o- http://virt-manager.org :|
|: http://autobuild.org -o- http://search.cpan.org/~danberr/ :|
|: http://entangle-photo.org -o- http://live.gnome.org/gtk-vnc :|
3376
days inactive
3377
days old
2 comments
3 participants
participants (3)
-
Daniel P. Berrange -
Jean-Pierre Ribeauville -
Pierre Schweitzer