2:20 a.m.
Hi all,
from here [1]:
"Network connections that support guest-transparent VLAN tagging include
1) type='bridge' interfaces connected to an Open vSwitch bridge Since
0.10.0 , 2) SRIOV Virtual Functions (VF) used via type='hostdev' (direct
device assignment) Since 0.10.0 , and 3) SRIOV VFs used via
type='direct' with mode='passthrough' (macvtap "passthru" mode)
Since
1.3.5 . All other connection types, including standard linux bridges and
libvirt's own virtual networks, do not support it."
I read it correctly that when used on a classical linux bridge these
vlan tags does nothing? If so, it is due to something related to the
underlying bridge device (ie: incomplete support for vlan filtering) or
it is because libvirt lacks the necessary "plumbing" to use advanced
bridge features?
Thanks.
[1]
https://libvirt.org/formatdomain.html#setting-vlan-tag-on-supported-netwo...
--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti(a)assyoma.it - info(a)assyoma.it
GPG public key ID: FF5F32A8
2:24 a.m.
On Thu, Jun 16, 2022 at 09:20:21 +0200, Gionatan Danti wrote:
Hi all,
from here [1]:
"Network connections that support guest-transparent VLAN tagging include 1)
type='bridge' interfaces connected to an Open vSwitch bridge Since 0.10.0 ,
2) SRIOV Virtual Functions (VF) used via type='hostdev' (direct device
assignment) Since 0.10.0 , and 3) SRIOV VFs used via type='direct' with
mode='passthrough' (macvtap "passthru" mode) Since 1.3.5 . All other
connection types, including standard linux bridges and libvirt's own virtual
networks, do not support it."
I read it correctly that when used on a classical linux bridge these vlan
tags does nothing? If so, it is due to something related to the underlying
bridge device (ie: incomplete support for vlan filtering) or it is because
libvirt lacks the necessary "plumbing" to use advanced bridge features?
AFAIK it was simply never implemented. There's also an upstream feature
request for this:
https://gitlab.com/libvirt/libvirt/-/issues/157
Thanks.
[1]
https://libvirt.org/formatdomain.html#setting-vlan-tag-on-supported-netwo...
--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti(a)assyoma.it - info(a)assyoma.it
GPG public key ID: FF5F32A8
9:03 a.m.
On 6/16/22 3:24 AM, Peter Krempa wrote:
On Thu, Jun 16, 2022 at 09:20:21 +0200, Gionatan Danti wrote:
> Hi all,
> from here [1]:
>
> "Network connections that support guest-transparent VLAN tagging include 1)
> type='bridge' interfaces connected to an Open vSwitch bridge Since 0.10.0 ,
> 2) SRIOV Virtual Functions (VF) used via type='hostdev' (direct device
> assignment) Since 0.10.0 , and 3) SRIOV VFs used via type='direct' with
> mode='passthrough' (macvtap "passthru" mode) Since 1.3.5 . All
other
> connection types, including standard linux bridges and libvirt's own virtual
> networks, do not support it."
>
> I read it correctly that when used on a classical linux bridge these vlan
> tags does nothing? If so, it is due to something related to the underlying
> bridge device (ie: incomplete support for vlan filtering) or it is because
> libvirt lacks the necessary "plumbing" to use advanced bridge features?
AFAIK it was simply never implemented. There's also an upstream feature
request for this:
https://gitlab.com/libvirt/libvirt/-/issues/157
When VLAN tagging was first implemented, Linux host bridges didn't have
this capability - the only way to get guest traffic transparently tagged
in that case was by having the bridge attached to a host VLAN interface
rather than directly to the physical ethernet (resulting in the traffic
from all guests attached to the bridge being tagged/untagged). A few
years later support for tagging on individual host bridge ports was aded
to the Linux bridge driver, but there was never enough push for the
feature to get it added to libvirt.
"Patches are welcome" of course!
12:28 p.m.
Il 2022-06-16 16:03 Laine Stump ha scritto:
On 6/16/22 3:24 AM, Peter Krempa wrote:
> AFAIK it was simply never implemented. There's also an upstream
> feature
> request for this:
>
> https://gitlab.com/libvirt/libvirt/-/issues/157
When VLAN tagging was first implemented, Linux host bridges didn't
have this capability - the only way to get guest traffic transparently
tagged in that case was by having the bridge attached to a host VLAN
interface rather than directly to the physical ethernet (resulting in
the traffic from all guests attached to the bridge being
tagged/untagged). A few years later support for tagging on individual
host bridge ports was aded to the Linux bridge driver, but there was
never enough push for the feature to get it added to libvirt.
"Patches are welcome" of course!
Thank you both,
Regards.
--
Danti Gionatan
Supporto Tecnico
Assyoma S.r.l. - www.assyoma.it
email: g.danti(a)assyoma.it - info(a)assyoma.it
GPG public key ID: FF5F32A8
768
days inactive
771
days old
3 comments
3 participants
participants (3)
-
Gionatan Danti -
Laine Stump -
Peter Krempa