4:44 a.m.
(sorry, dont know how i put my posting into an reply to an other issue
before,
new posting to sepearte it, big sorry)
Hello list,
i updated on a gentoo system from libvirtd 2.5 to 3.1.0
Now my windows machines cant access internet.
I did a virbr1 with virt-manager and route it to the eth0, works fine on
2.5
Hello list,
i updated on a gentoo system from libvirtd 2.5 to 3.1.0
Now my windows machines cant access internet.
I did a virbr1 with virt-manager and route it to the eth0, works fine on
2.5
on install i get this:
Important: The openrc libvirtd init script is now broken up into two
separate services: libvirtd, that solely handles the daemon, and
libvirt-guests, that takes care of clients during shutdown/restart of
the
host. In order to reenable client handling, edit
/etc/conf.d/libvirt-guests
and enable the service and start it:
$ rc-update add libvirt-guests
$ service libvirt-guests start
For the basic networking support (bridged and routed networks) you don't
need any extra software. For more complex network modes including but
not
limited to NATed network, you can enable the 'virt-network' USE flag. It
will pull in required runtime dependencies
If you are using dnsmasq on your system, you will have to configure
/etc/dnsmasq.conf to enable the following settings:
bind-interfaces
interface or except-interface
Otherwise you might have issues with your existing DNS server.
For openrc users:
Please use /etc/conf.d/libvirtd to control the '--listen'
parameter for
libvirtd.
Use /etc/init.d/libvirt-guests to manage clients on
restart/shutdown of
the host. The default configuration will suspend and resume
running kvm
guests with 'managedsave'. This behavior can be changed under
/etc/conf.d/libvirt-guests
virt-manager starts fine and shows my vm´s. i dont touched /etc/dnsmasq
cause i dont used it. so left untouched.
yes, i added libvirt-guests with rc-update
the virbr1 has 192.168.18.1 as address, and is reachable via ping from
vm guest.
but it cant resolve hostnames and cant ping ip´s outside the
virtualisation host.
anyone knows this effect after update?
do i have to change some more things?
or is this a bug?
any help and hints are welcome
thank you
marko weber
on install i get this:
Important: The openrc libvirtd init script is now broken up into two
separate services: libvirtd, that solely handles the daemon, and
libvirt-guests, that takes care of clients during shutdown/restart of
the
host. In order to reenable client handling, edit
/etc/conf.d/libvirt-guests
and enable the service and start it:
$ rc-update add libvirt-guests
$ service libvirt-guests start
For the basic networking support (bridged and routed networks) you don't
need any extra software. For more complex network modes including but
not
limited to NATed network, you can enable the 'virt-network' USE flag. It
will pull in required runtime dependencies
If you are using dnsmasq on your system, you will have to configure
/etc/dnsmasq.conf to enable the following settings:
bind-interfaces
interface or except-interface
Otherwise you might have issues with your existing DNS server.
For openrc users:
Please use /etc/conf.d/libvirtd to control the '--listen'
parameter for
libvirtd.
Use /etc/init.d/libvirt-guests to manage clients on
restart/shutdown of
the host. The default configuration will suspend and resume
running kvm
guests with 'managedsave'. This behavior can be changed under
/etc/conf.d/libvirt-guests
virt-manager starts fine and shows my vm´s. i dont touched /etc/dnsmasq
cause i dont used it. so left untouched.
yes, i added libvirt-guests with rc-update
the virbr1 has 192.168.18.1 as address, and is reachable via ping from
vm guest.
but it cant resolve hostnames and cant ping ip´s outside the
virtualisation host.
anyone knows this effect after update?
do i have to change some more things?
or is this a bug?
any help and hints are welcome
thank you
marko weber
--
zbfmail - Mittendrin statt nur Datei!
OpenDKIM, SPF, DSPAM, Greylisting, POSTSCREEN, AMAVIS, Mailgateways
Mailfiltering, SMTP Service, Spam Abwehr, MX-Backup, Mailserver Backup
Redundante Mailgateways, HA Mailserver, Secure Mailserver
6:01 a.m.
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
(sorry, dont know how i put my posting into an reply to an other issue
before,
new posting to sepearte it, big sorry)
Hello list,
i updated on a gentoo system from libvirtd 2.5 to 3.1.0
Now my windows machines cant access internet.
I did a virbr1 with virt-manager and route it to the eth0, works fine on
2.5
Hello list,
anyone knows this effect after update?
do i have to change some more things?
or is this a bug?
What is your domain configuration? What is your firewall setting? I use
gentoo too, but hasn't experienced this. On the other hand, I don't use
the same setting as you do.
Michal
7:30 a.m.
New subject: [libvirt-users] external snapshots freezes block device since qemu 2.8
Hello there.
I discovered, that since qemu 2.8 , external snapshots (very similar to:
http://wiki.libvirt.org/page/Live-disk-backup-with-active-blockcommit),
freezes block device after:
# virsh blockcommit (...)
There is no error message after completion of the command above.
I'm using gluster + ZFS fuse mount as a storage for a VM on gentoo.
libvirt debug showed nothing helpful.
With qemu <2.8 -: snapshots are working as expected.
Is this a known issue?
Is it qemu or libvirt ?
If it helps, how can i diagnose this further?
Thank You & Best regards
Piotr Rybicki
10:53 a.m.
Am 2017-03-07 13:01, schrieb Michal Privoznik:
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
>
>
> (sorry, dont know how i put my posting into an reply to an other issue
> before,
> new posting to sepearte it, big sorry)
>
>
>
>
> Hello list,
>
> i updated on a gentoo system from libvirtd 2.5 to 3.1.0
> Now my windows machines cant access internet.
> I did a virbr1 with virt-manager and route it to the eth0, works fine
> on
> 2.5
> Hello list,
>
> anyone knows this effect after update?
> do i have to change some more things?
> or is this a bug?
What is your domain configuration? What is your firewall setting? I use
gentoo too, but hasn't experienced this. On the other hand, I don't use
the same setting as you do.
Michal
Hello Michal,
what do you mean with "domain config"? i can do a virsh xml dump of the
domain.
Firewall, i dont used an nw* from libvirt, i do all via iptables &
shorewall
i paste it here
tell me if you need more
the domain:
<domain type='kvm' id='4'>
<name>PAC-DC</name>
<uuid>47d0e291-ff7f-47af-98ef-ee8b8124af0d</uuid>
<title>PAC-DC</title>
<memory unit='KiB'>16777216</memory>
<currentMemory unit='KiB'>16777216</currentMemory>
<vcpu placement='static' current='2'>12</vcpu>
<resource>
<partition>/machine</partition>
</resource>
<os>
<type arch='x86_64' machine='pc-i440fx-2.8'>hvm</type>
<bootmenu enable='yes'/>
</os>
<features>
<acpi/>
<apic/>
<hyperv>
<relaxed state='on'/>
<vapic state='on'/>
<spinlocks state='on' retries='8191'/>
</hyperv>
</features>
<cpu mode='custom' match='exact'>
<model fallback='forbid'>Broadwell</model>
<vendor>Intel</vendor>
<topology sockets='1' cores='6' threads='2'/>
<feature policy='require' name='vme'/>
<feature policy='require' name='ds'/>
<feature policy='require' name='acpi'/>
<feature policy='require' name='ss'/>
<feature policy='require' name='ht'/>
<feature policy='require' name='tm'/>
<feature policy='require' name='pbe'/>
<feature policy='require' name='dtes64'/>
<feature policy='require' name='monitor'/>
<feature policy='require' name='ds_cpl'/>
<feature policy='require' name='vmx'/>
<feature policy='require' name='smx'/>
<feature policy='require' name='est'/>
<feature policy='require' name='tm2'/>
<feature policy='require' name='xtpr'/>
<feature policy='require' name='pdcm'/>
<feature policy='require' name='dca'/>
<feature policy='require' name='osxsave'/>
<feature policy='require' name='f16c'/>
<feature policy='require' name='rdrand'/>
<feature policy='require' name='arat'/>
<feature policy='require' name='tsc_adjust'/>
<feature policy='require' name='xsaveopt'/>
<feature policy='require' name='pdpe1gb'/>
<feature policy='require' name='abm'/>
</cpu>
<clock offset='localtime'>
<timer name='rtc' tickpolicy='catchup'/>
<timer name='pit' tickpolicy='delay'/>
<timer name='hpet' present='no'/>
<timer name='hypervclock' present='yes'/>
</clock>
<on_poweroff>destroy</on_poweroff>
<on_reboot>restart</on_reboot>
<on_crash>restart</on_crash>
<pm>
<suspend-to-mem enabled='no'/>
<suspend-to-disk enabled='no'/>
</pm>
<devices>
<emulator>/usr/bin/qemu-system-x86_64</emulator>
<disk type='file' device='disk'>
<driver name='qemu' type='qcow2'/>
<source file='/vm/windows-2016-_DC.qcow2'/>
<backingStore/>
<target dev='vda' bus='virtio'/>
<boot order='2'/>
<alias name='virtio-disk0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x06'
function='0x0'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<backingStore/>
<target dev='hdb' bus='ide'/>
<readonly/>
<boot order='1'/>
<alias name='ide0-0-1'/>
<address type='drive' controller='0' bus='0'
target='0' unit='1'/>
</disk>
<disk type='file' device='cdrom'>
<driver name='qemu' type='raw'/>
<source file='/store/virtio-win.iso'/>
<backingStore/>
<target dev='hdc' bus='ide'/>
<readonly/>
<alias name='ide0-1-0'/>
<address type='drive' controller='0' bus='1'
target='0' unit='0'/>
</disk>
<controller type='usb' index='0' model='ich9-ehci1'>
<alias name='usb'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04'
function='0x7'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci1'>
<alias name='usb'/>
<master startport='0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04'
function='0x0' multifunction='on'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci2'>
<alias name='usb'/>
<master startport='2'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04'
function='0x1'/>
</controller>
<controller type='usb' index='0' model='ich9-uhci3'>
<alias name='usb'/>
<master startport='4'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x04'
function='0x2'/>
</controller>
<controller type='pci' index='0' model='pci-root'>
<alias name='pci.0'/>
</controller>
<controller type='ide' index='0'>
<alias name='ide'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x01'
function='0x1'/>
</controller>
<controller type='virtio-serial' index='0'>
<alias name='virtio-serial0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x05'
function='0x0'/>
</controller>
<interface type='network'>
<mac address='52:54:00:0f:69:2b'/>
<source network='br1' bridge='virbr1'/>
<target dev='vnet0'/>
<model type='virtio'/>
<alias name='net0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
function='0x0'/>
</interface>
<serial type='pty'>
<source path='/dev/pts/1'/>
<target port='0'/>
<alias name='serial0'/>
</serial>
<console type='pty' tty='/dev/pts/1'>
<source path='/dev/pts/1'/>
<target type='serial' port='0'/>
<alias name='serial0'/>
</console>
<console type='pty'>
<source path='/dev/pts/2'/>
<target type='virtio' port='1'/>
<alias name='console1'/>
</console>
<channel type='unix'>
<source mode='bind'
path='/var/lib/libvirt/qemu/channel/target/domain-4-PAC-DC/org.qemu.guest_agent.0'/>
<target type='virtio' name='org.qemu.guest_agent.0'
state='connected'/>
<alias name='channel0'/>
<address type='virtio-serial' controller='0' bus='0'
port='1'/>
</channel>
<input type='tablet' bus='usb'>
<alias name='input0'/>
<address type='usb' bus='0' port='1'/>
</input>
<input type='mouse' bus='ps2'>
<alias name='input1'/>
</input>
<input type='keyboard' bus='ps2'>
<alias name='input2'/>
</input>
<graphics type='vnc' port='5900' autoport='yes'
listen='127.0.0.1'>
<listen type='address' address='127.0.0.1'/>
</graphics>
<video>
<model type='virtio' heads='1' primary='yes'/>
<alias name='video0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x02'
function='0x0'/>
</video>
<memballoon model='virtio'>
<stats period='5'/>
<alias name='balloon0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x07'
function='0x0'/>
</memballoon>
<rng model='virtio'>
<backend model='random'>/dev/random</backend>
<alias name='rng0'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x08'
function='0x0'/>
</rng>
</devices>
<seclabel type='none' model='none'/>
<seclabel type='dynamic' model='dac' relabel='yes'>
<label>+77:+77</label>
<imagelabel>+77:+77</imagelabel>
</seclabel>
</domain>
networking br1 (virbr1):
and routed to existing br0
virsh # net-dumpxml br1
<network connections='2'>
<name>br1</name>
<uuid>990cd005-c551-4f5e-86f9-9b718f3b810b</uuid>
<forward dev='br0' mode='route'>
<interface dev='br0'/>
</forward>
<bridge name='virbr1' stp='on' delay='0'/>
<mac address='52:54:00:75:a4:2f'/>
<domain name='br1'/>
<ip address='192.168.18.1' netmask='255.255.255.0'>
</ip>
</network>
you need more info?
hmm i also had an "host-bridge" defined network to br0 on my gentoo
machine
# ifconfig
br0: flags=4419<UP,BROADCAST,RUNNING,PROMISC,MULTICAST> mtu 1500
inet 192.168.17.1 netmask 255.255.255.0 broadcast
192.168.17.255
ether f6:6a:1c:5a:e8:93 txqueuelen 1000 (Ethernet)
RX packets 67984 bytes 5401548 (5.1 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 33143 bytes 45362855 (43.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 88.198.185.235 netmask 255.255.255.192 broadcast
88.198.185.255
ether 18:66:da:88:0d:37 txqueuelen 1000 (Ethernet)
RX packets 1080633 bytes 990840130 (944.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1735305 bytes 2045606964 (1.9 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 18
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Local Loopback)
RX packets 607097 bytes 1883581534 (1.7 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 607097 bytes 1883581534 (1.7 GiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
tap0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether f6:6a:1c:5a:e8:93 txqueuelen 100 (Ethernet)
RX packets 67984 bytes 6353324 (6.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 85353 bytes 48259222 (46.0 MiB)
TX errors 0 dropped 188 overruns 0 carrier 0 collisions 0
virbr1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.18.1 netmask 255.255.255.0 broadcast
192.168.18.255
ether 52:54:00:75:a4:2f txqueuelen 1000 (Ethernet)
RX packets 178002 bytes 54585053 (52.0 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 241542 bytes 899962475 (858.2 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether fe:54:00:0f:69:2b txqueuelen 1000 (Ethernet)
RX packets 3692 bytes 3461678 (3.3 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 14142 bytes 1201183 (1.1 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether fe:54:00:0a:34:1e txqueuelen 1000 (Ethernet)
RX packets 79661 bytes 18343744 (17.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 112365 bytes 437957368 (417.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
or do i have to set via virt-manager the br1 (virbr1) routed to eth0?
thanks
Marko
4:11 a.m.
On Tue, Mar 07, 2017 at 05:53:45PM +0100, Marko Weber | 8000 wrote:
Am 2017-03-07 13:01, schrieb Michal Privoznik:
> On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
>>
>>
>> (sorry, dont know how i put my posting into an reply to an other issue
>> before,
>> new posting to sepearte it, big sorry)
>>
Oh yeah, sorry for my previous mail, I replied to the other one before
noticing this one :)
In addition to what you posted here, can you also attach the output of
`brctl show`?
Thanks and sorry once more,
Martin
9:09 a.m.
Am 2017-03-08 11:11, schrieb Martin Kletzander:
On Tue, Mar 07, 2017 at 05:53:45PM +0100, Marko Weber | 8000 wrote:
>
>
> Am 2017-03-07 13:01, schrieb Michal Privoznik:
>> On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
>>>
>>>
>>> (sorry, dont know how i put my posting into an reply to an other
>>> issue
>>> before,
>>> new posting to sepearte it, big sorry)
>>>
Oh yeah, sorry for my previous mail, I replied to the other one before
noticing this one :)
In addition to what you posted here, can you also attach the output of
`brctl show`?
Thanks and sorry once more,
Martin
Hi Martin,
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.f66a1c5ae893 yes tap0
virbr1 8000.52540075a42f yes virbr1-nic
vnet0
vnet1
this is output, of brctl show
marko
11:06 a.m.
Am 2017-03-07 13:01, schrieb Michal Privoznik:
On 03/07/2017 11:44 AM, Marko Weber | 8000 wrote:
>
>
> (sorry, dont know how i put my posting into an reply to an other issue
> before,
> new posting to sepearte it, big sorry)
>
>
>
>
> Hello list,
>
> i updated on a gentoo system from libvirtd 2.5 to 3.1.0
> Now my windows machines cant access internet.
> I did a virbr1 with virt-manager and route it to the eth0, works fine
> on
> 2.5
> Hello list,
>
> anyone knows this effect after update?
> do i have to change some more things?
> or is this a bug?
What is your domain configuration? What is your firewall setting? I use
gentoo too, but hasn't experienced this. On the other hand, I don't use
the same setting as you do.
Michal
Michal,
here is also the 'host-bridge' i defined via a short xml
virsh # net-dumpxml host-bridge
<network>
<name>host-bridge</name>
<uuid>51a0a2b0-a568-4e5d-bd2b-c4315bbb7cbf</uuid>
<forward mode='bridge'/>
<bridge name='br0'/>
</network>
idea in email before was, to route virbr1 to eth0 instead br0.
is that a better way?
marko
2697
days inactive
2698
days old
6 comments
4 participants
participants (4)
-
Marko Weber | 8000 -
Martin Kletzander -
Michal Privoznik -
Piotr Rybicki