Re: [libvirt-users] 回复: 回复: virsh create error : monitor socket did not

15 Mar 2012

      On 03/15/2012 05:39 PM, 张光鹏 wrote:
...
sorry , i send an error template , our template like this:
It probably is a bug on libvirt 0.8.7, and I haven't met this issue
using your XML template on
rhel6.2 with libvirt-0.9.10-5.el6.x86_64, I'm not sure whether this
issue is fixed on 0.8.7-18.el6_1.4,
maybe, you may upgrade your libvirt and then try it again.
For libvirtd log, yeah, it will be very big if you set a low debugger
level such as level 1, but
as usual, we need also some debugger information except for error,
maybe, you can filter
some important information or set debugger level to higher level to
avoid a big size log file.
in addition, if you're run virt-manager please close it, otherwise,
libvirt will record many
debugger information into libvirtd.log.

BTW, if you don't want log file eat your the whole disk space, please
remember to change
libvirtd.conf debugger level then remove libvirtd.log and restart
libvirtd service.

Regards,
Alex
...
...
Hi,
Occasionally I run into this situation , i created a vm-template and
i use "virsh create vm-template " to start a vm .After a pause , i
got this error :
virsh create error : monitor socket did not ;
Could you provide your libvirt & qemu-kvm version ? what's your
<domain type='kvm'
xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<name>one-9</name>
<vcpu>1</vcpu>
<memory>524288</memory>
<os>
<type arch='x86_64'>hvm</type>
<boot dev='hd'/>
</os>
<devices>
<emulator>/usr/bin/kvm</emulator>
<disk type='file' device='disk'>
<source file='/one_images/9/images/disk.0'/>
<target dev='hda'/>
<driver name='qemu' type='raw' cache='default'/>
</disk>
<disk type='file' device='cdrom'>
<source file='/one_images/9/images/disk.1'/>
<target dev='hdc'/>
<readonly/>
<driver name='qemu' type='raw'/>
</disk>
<interface type='bridge'>
<source bridge='kvmbr0'/>
<mac address='02:00:0b:01:01:03'/>
</interface>
<graphics type='vnc' listen='0.0.0.0' port='5909'/>
</devices>
<features>
<acpi/>
</features>
</domain>
------------------------------------------------------------------------
张光鹏
*发件人：* 张光鹏 <mailto:zhanggp@neusoft.com>
*发送时间：* 2012-03-15 17:25
*收件人：* Alex Jia <mailto:ajia@redhat.com>
*主题：* 回复: Re: [libvirt-users] virsh create error : monitor socket
did not
Hi，
my libvirt version is 0.8.7 and qemu-kvm-0.12.1.2 on redhat6.1.
I don't set libvirt log, so thank you for reminding me.
I think my template is right ,because my code generate automatically.
But i would like to share with you and find the problem.
By the way , i configured the libvirt log, and i find this file kept
getting bigger. If this file becomes large enough , i don't think it's
a good thing , so, you must have some advise to handle it ,right?
Thanks.
------------------------------------------------------------------------
张光鹏
*发件人：* Alex Jia <mailto:ajia@redhat.com>
*发送时间：* 2012-03-15 16:56
*收件人：* 张光鹏 <mailto:zhanggp@neusoft.com>
*抄送：* libvirt-users <mailto:libvirt-users@redhat.com>
*主题：* Re: [libvirt-users] virsh create error : monitor socket did not
On 03/15/2012 11:31 AM, 张光鹏 wrote:
platform? fedora or others?
...
Then i try again with the same template and the same command , my vm
created successfully.
I try to find something in the file of
/var/log/libvrit/qemu/vm-template.log, but i cannot find useful
things except some parameters.
However, it's helpful if you may attach the above log as a attachment.
in addition, you may add the following lines into
/etc/libvirt/libvirtd.conf and restart libvirtd service then repeat
'virsh create vm-template' again:
log_filters="3:remote 3:event 1:qemu 1:libvirt 1:conf"
log_outputs="1:file:/var/log/libvirt/libvirtd.log"
Could you attach /var/log/libvirt/libvirtd.log as a attachment in here?
...
So , i wonder whether my host running vms too much ? I make sure that
my template is right, and this error occasionally appear a few times.
But if you can attach your guest XML template as a attachment, maybe,
I can exclude other reason.
Regards,
Alex
...
Can someone teach me ?
Thanks.
Best regards.
------------------------------------------------------------------------
张光鹏
tel: 13718913184
mail: zhanggp@neusoft.com <mailto:zhanggp@neusoft.com>
移动互联网事业部
东软集团股份有限公司
http://www.neusoft.com
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and
any accompanying attachment(s)
is intended only for the use of the intended recipient and may be
confidential and/or privileged of
Neusoft Corporation, its subsidiaries and/or its affiliates. If any
reader of this communication is
not the intended recipient, unauthorized use, forwarding, printing,
storing, disclosure or copying
is strictly prohibited, and may be unlawful.If you have received this
communication in error,please
immediately notify the sender by return e-mail, and delete the
original message and all copies from
your system. Thank you.
---------------------------------------------------------------------------------------------------
_______________________________________________
libvirt-users mailing list
libvirt-users@redhat.com
https://www.redhat.com/mailman/listinfo/libvirt-users
---------------------------------------------------------------------------------------------------
Confidentiality Notice: The information contained in this e-mail and
any accompanying attachment(s)
is intended only for the use of the intended recipient and may be
confidential and/or privileged of
Neusoft Corporation, its subsidiaries and/or its affiliates. If any
reader of this communication is
not the intended recipient, unauthorized use, forwarding, printing,
storing, disclosure or copying
is strictly prohibited, and may be unlawful.If you have received this
communication in error,please
immediately notify the sender by return e-mail, and delete the
original message and all copies from
your system. Thank you.
---------------------------------------------------------------------------------------------------

Alex Jia

tags

participants (1)