Hi, Sorry for putting the images. Posting this question again. I am trying to boot my node through network with the following configuration (even with KVM it is not getting booted): < domain type='kvm'> < name>Node-2-3</name> < os> < type>hvm</type> < boot dev='network'/> < boot dev='hd'/> < /os> < memory>654321</memory> < vcpu>1</vcpu> < interface type='internal'> < source name='test1'/> < model type='am79c970a'/> < mac address='20:00:00:0F:03:01'/> < /interface> < interface type='internal'> < source name='test2'/> < model type='am79c970a'/> < mac address='20:00:00:0F:03:02'/> < /interface> <!--BRIDGE--> < interface type='bridge'> < source bridge='vboxtap0'/> < mac address='20:00:00:0F:03:03'/> < model type='am79c973'/> < /interface> < /domain> But I am getting an error message saying: Fatal: Could not read from the boot medium! System halted. Even my network setting is not getting reflected in the Virtualbox. Can you suggest me what is wrong with this configuration. I think to boot a node from network we need to define a boot server but where shall I add that, I am confused.... Any help will be appreciated. Thanks in advance. Regards, Varun =====-----=====-----===== Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you