Trying to use virsh for hyperv and getting this. virsh # connect hyperv://172.168.1.111:5985/?transport=http Enter username for 172.168.1.111 [administrator]: administrator Enter administrator's password for 172.168.1.111: 2013-04-29 10:36:48.690+0000: 13991: error : hypervDebugHandler:1444 : openwsman error: NULL response error: Failed to connect to the hypervisor error: internal error Transport error during enumeration: User, password or similar was not accepted (26) Using libvirt 1.0.4 from source code. What is going wrong in this hyperv connection ?

Hi Matthias, Now without making any changes,through virsh hyperv connection is going through. On same setup, but when I am trying to connect using java binding to hyperv , it is throwing --- libvir: error : invalid argument: libvirt was built without the 'hyperv' driver exception caught:org.libvirt.LibvirtException: invalid argument: libvirt was built without the 'hyperv' driver level:VIR_ERR_ERROR code:VIR_ERR_INVALID_ARG domain:VIR_FROM_NONE hasConn:false hasDom:false hasNet:false message:invalid argument: libvirt was built without the 'hyperv' driver str1:invalid argument: %s str2:libvirt was built without the 'hyperv' driver str3:null int1:-1 int2:-1 I think libvirt is built correctly as virsh is able to connect to hyperv correct me if I am wrong. but using java binding it says "libvirt was built without the 'hyperv' driver". Can you pls. tell what I am missing when I am doing it through java binding or is there any setting/configuration which I am missing. Java code - I am using - String hypervURI = "hyperv://administrator@SBRWINPR/?transport=http"; ConnectAuth ca1 = new ConnectAuthDefault(); hypervconn = new Connect(hypervURI,ca1,0); System.out.println("HYPERV:"+hypervconn.getCapabilities()); Regards, Deepak ________________________________ From: D e e p a k <deepakmits(a)yahoo.com&gt; To: Matthias Bolte <matthias.bolte(a)googlemail.com>; &quot;libvirt-users(a)redhat.com&quot; <libvirt-users(a)redhat.com&gt; Sent: Friday, 3 May 2013 9:52 AM Subject: Re: [libvirt-users] hyperv connection failing with libvirt 1.0.4 virsh. Hi Matthias, Thanks for your reply. After checking all the required configuration. I found that firewall was not enabled and rules for WMI was not enabled. I made these changes. But now I am getting this - virsh # connect hyperv://172.168.1.111/transport=http Enter username for 172.168.1.111 [administrator]: administrator Enter administrator's password for 172.168.1.111: 2013-05-03 09:42:48.387+0000: 7235: info : libvirt version: 1.0.4 2013-05-03 09:42:48.387+0000: 7235: error : hypervDebugHandler:1444 : openwsman error: NULL response error: Failed to connect to the hypervisor error: internal error Transport error during enumeration: Could not connect (7) Any idea what is going wrong here . Regards, Deepak ________________________________ From: Matthias Bolte <matthias.bolte(a)googlemail.com&gt; To: D e e p a k <deepakmits(a)yahoo.com&gt; Cc: &quot;libvirt-users(a)redhat.com&quot; <libvirt-users(a)redhat.com&gt; Sent: Wednesday, 1 May 2013 4:41 PM Subject: Re: [libvirt-users] hyperv connection failing with libvirt 1.0.4 virsh. 2013/4/29 D e e p a k <deepakmits(a)yahoo.com&gt; > > Trying to use virsh for hyperv and getting this. > > virsh # connect hyperv://172.168.1.111:5985/?transport=http > Enter username for 172.168.1.111 [administrator]: administrator > Enter administrator's password for 172.168.1.111: > 2013-04-29 10:36:48.690+0000: 13991: error : hypervDebugHandler:1444 : > openwsman error: NULL response > error: Failed to connect to the hypervisor > error: internal error Transport error during enumeration: User, password > or similar was not accepted (26) > > Using libvirt 1.0.4 from source code. > What is going wrong in this hyperv connection ? A bit of a guess, but did you configure your Hyper-V server as described? http://libvirt.org/drvhyperv.html#auth

Hi Matthias, Now without making any changes,through virsh hyperv connection is going through. On same setup, but when I am trying to connect using java binding to hyperv , it is throwing --- libvir: error : invalid argument: libvirt was built without the 'hyperv' driver exception caught:org.libvirt.LibvirtException: invalid argument: libvirt was built without the 'hyperv' driver level:VIR_ERR_ERROR code:VIR_ERR_INVALID_ARG domain:VIR_FROM_NONE hasConn:false hasDom:false hasNet:false message:invalid argument: libvirt was built without the 'hyperv' driver str1:invalid argument: %s str2:libvirt was built without the 'hyperv' driver str3:null int1:-1 int2:-1 I think libvirt is built correctly as virsh is able to connect to hyperv correct me if I am wrong. but using java binding it says "libvirt was built without the 'hyperv' driver". Can you pls. tell what I am missing when I am doing it through java binding or is there any setting/configuration which I am missing. Java code - I am using - String hypervURI = "hyperv://administrator@SBRWINPR/?transport=http";                 ConnectAuth ca1 = new ConnectAuthDefault();                 hypervconn = new Connect(hypervURI,ca1,0);                 System.out.println("HYPERV:"+hypervconn.getCapabilities()); Regards, Deepak ________________________________ From: D e e p a k <deepakmits(a)yahoo.com&gt; To: Matthias Bolte <matthias.bolte(a)googlemail.com>; &quot;libvirt-users(a)redhat.com&quot; <libvirt-users(a)redhat.com&gt; Sent: Friday, 3 May 2013 9:52 AM Subject: Re: [libvirt-users] hyperv connection failing with libvirt 1.0.4 virsh. Hi Matthias, Thanks for your reply. After checking all the required configuration. I found that firewall was not enabled and rules for WMI was not enabled. I made these changes. But now I am getting this - virsh # connect hyperv://172.168.1.111/transport=http Enter username for 172.168.1.111 [administrator]: administrator Enter administrator's password for 172.168.1.111: 2013-05-03 09:42:48.387+0000: 7235: info : libvirt version: 1.0.4 2013-05-03 09:42:48.387+0000: 7235: error : hypervDebugHandler:1444 : openwsman error: NULL response error: Failed to connect to the hypervisor error: internal error Transport error during enumeration: Could not connect (7) Any idea what is going wrong here . Regards, Deepak ________________________________ From: Matthias Bolte <matthias.bolte(a)googlemail.com&gt; To: D e e p a k <deepakmits(a)yahoo.com&gt; Cc: &quot;libvirt-users(a)redhat.com&quot; <libvirt-users(a)redhat.com&gt; Sent: Wednesday, 1 May 2013 4:41 PM Subject: Re: [libvirt-users] hyperv connection failing with libvirt 1.0.4 virsh. 2013/4/29 D e e p a k <deepakmits(a)yahoo.com&gt; > > Trying to use virsh for hyperv and getting this. > > virsh # connect hyperv://172.168.1.111:5985/?transport=http > Enter username for 172.168.1.111 [administrator]: administrator > Enter administrator's password for 172.168.1.111: > 2013-04-29 10:36:48.690+0000: 13991: error : hypervDebugHandler:1444 : > openwsman error: NULL response > error: Failed to connect to the hypervisor > error: internal error Transport error during enumeration: User, password > or similar was not accepted (26) > > Using libvirt 1.0.4 from source code. > What is going wrong in this hyperv connection ? A bit of a guess, but did you configure your Hyper-V server as described? http://libvirt.org/drvhyperv.html#auth