[libvirt-users] creating new vm with virt-manager, existing disk failure
hello, i rsynced a kvm vm from one host to another. i start virt-manager and tell virt-manager to use an existing disk. i set cpu to haswell that is on the host. configure before start is set, and i start "begin installation". I get this output by virt-manager: Unable to complete install: 'internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 477, in start_install doboot, transient) File "/usr/share/virt-manager/virtinst/guest.py", line 405, in _create_guest self.domain.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1062, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found try to set it to another cpu and clicking start, i get this: Unable to complete install: 'Domain has already been started!' Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 455, in start_install raise RuntimeError(_("Domain has already been started!")) RuntimeError: Domain has already been started! how do i stop the already runing vm? virsh list dont show the vm and why do i get the error on haswell? lscpu: Architecture: x86_64 CPU op-mode(s): 32-bit, 64-bit Byte Order: Little Endian CPU(s): 12 On-line CPU(s) list: 0-11 Thread(s) per core: 2 Core(s) per socket: 6 Socket(s): 1 NUMA node(s): 1 Vendor ID: GenuineIntel CPU family: 6 Model: 79 Model name: Intel(R) Xeon(R) CPU E5-1650 v4 @ 3.60GHz Stepping: 1 CPU MHz: 2974.658 CPU max MHz: 4000.0000 CPU min MHz: 1200.0000 BogoMIPS: 7191.87 Virtualization: VT-x L1d cache: 32K L1i cache: 32K L2 cache: 256K L3 cache: 15360K NUMA node0 CPU(s): 0-11 Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp lm constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx smx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid dca sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch epb cat_l3 cdp_l3 intel_pt tpr_shadow vnmi flexpriority ept vpid fsgsbase tsc_adjust bmi1 hle avx2 smep bmi2 erms invpcid rtm cqm rdt_a rdseed adx smap xsaveopt cqm_llc cqm_occup_llc cqm_mbm_total cqm_mbm_local dtherm ida arat pln pts kind regards marko -- zbfmail - Mittendrin statt nur Datei!
On Wed, Jul 19, 2017 at 11:45:36AM +0200, Marko Weber | 8000 wrote:
hello, i rsynced a kvm vm from one host to another. i start virt-manager and tell virt-manager to use an existing disk. i set cpu to haswell that is on the host.
configure before start is set, and i start "begin installation". I get this output by virt-manager:
Unable to complete install: 'internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 477, in start_install doboot, transient) File "/usr/share/virt-manager/virtinst/guest.py", line 405, in _create_guest self.domain.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1062, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found
try to set it to another cpu and clicking start, i get this:
Unable to complete install: 'Domain has already been started!'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 455, in start_install raise RuntimeError(_("Domain has already been started!")) RuntimeError: Domain has already been started!
how do i stop the already runing vm? virsh list dont show the vm and why do i get the error on haswell?
Hi, this is actually a bug in virt-manager which was fixed in upstream by these commits: 2099a1946e22b62d31b954dc3e7b813404c2d019 93085d2b9d4a3dd6cbb9edfeae9b6cefee9419c1 8181e8609867fe6ed101e48212d42a1c38373539 To work-around this issue cancel the installation and start it again. There is no official release of virt-manager with that fix included, we should probably make the release. Pavel
Am 2017-07-19 14:01, schrieb Pavel Hrdina:
On Wed, Jul 19, 2017 at 11:45:36AM +0200, Marko Weber | 8000 wrote:
hello, i rsynced a kvm vm from one host to another. i start virt-manager and tell virt-manager to use an existing disk. i set cpu to haswell that is on the host.
configure before start is set, and i start "begin installation". I get this output by virt-manager:
Unable to complete install: 'internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 477, in start_install doboot, transient) File "/usr/share/virt-manager/virtinst/guest.py", line 405, in _create_guest self.domain.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1062, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found
try to set it to another cpu and clicking start, i get this:
Unable to complete install: 'Domain has already been started!'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 455, in start_install raise RuntimeError(_("Domain has already been started!")) RuntimeError: Domain has already been started!
how do i stop the already runing vm? virsh list dont show the vm and why do i get the error on haswell?
Hi, this is actually a bug in virt-manager which was fixed in upstream by these commits:
2099a1946e22b62d31b954dc3e7b813404c2d019 93085d2b9d4a3dd6cbb9edfeae9b6cefee9419c1 8181e8609867fe6ed101e48212d42a1c38373539
To work-around this issue cancel the installation and start it again. There is no official release of virt-manager with that fix included, we should probably make the release.
Yes, i think its a great idea. Can u do this? kind regards marko
Pavel
Hi pavel, Am 2017-07-19 14:01, schrieb Pavel Hrdina:
On Wed, Jul 19, 2017 at 11:45:36AM +0200, Marko Weber | 8000 wrote:
hello, i rsynced a kvm vm from one host to another. i start virt-manager and tell virt-manager to use an existing disk. i set cpu to haswell that is on the host.
configure before start is set, and i start "begin installation". I get this output by virt-manager:
Unable to complete install: 'internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 477, in start_install doboot, transient) File "/usr/share/virt-manager/virtinst/guest.py", line 405, in _create_guest self.domain.create() File "/usr/lib64/python2.7/site-packages/libvirt.py", line 1062, in create if ret == -1: raise libvirtError ('virDomainCreate() failed', dom=self) libvirtError: internal error: process exited while connecting to monitor: 2017-07-19T09:27:10.861928Z qemu-system-x86_64: can't apply global Haswell-x86_64-cpu.cmt=on: Property '.cmt' not found
try to set it to another cpu and clicking start, i get this:
Unable to complete install: 'Domain has already been started!'
Traceback (most recent call last): File "/usr/share/virt-manager/virtManager/asyncjob.py", line 88, in cb_wrapper callback(asyncjob, *args, **kwargs) File "/usr/share/virt-manager/virtManager/create.py", line 2288, in _do_async_install guest.start_install(meter=meter) File "/usr/share/virt-manager/virtinst/guest.py", line 455, in start_install raise RuntimeError(_("Domain has already been started!")) RuntimeError: Domain has already been started!
how do i stop the already runing vm? virsh list dont show the vm and why do i get the error on haswell?
Hi, this is actually a bug in virt-manager which was fixed in upstream by these commits:
2099a1946e22b62d31b954dc3e7b813404c2d019 93085d2b9d4a3dd6cbb9edfeae9b6cefee9419c1 8181e8609867fe6ed101e48212d42a1c38373539
To work-around this issue cancel the installation and start it again. There is no official release of virt-manager with that fix included, we should probably make the release.
Pavel
can you tell me if this problem is solved in the time? We need this way to migrate machines. Or is it not planned to fix this bug? kind regards marko
participants (3)
-
Marko Weber -
Marko Weber | 8000
-
Pavel Hrdina