9:26 a.m.
Hello to the list at first - i am first time here.
i setup on my gentoo box libvirt and virt-manager.
when i fireup virt-manager all seems okay.
when i want to create a new virtual machine it seems all okay,
until the step when i want to add an iso image to the cdrom.
i notcied that i cant choose to connect cdrom, also the network is not
found.
i can post error codes from log when needed,
just wanted to ask, if someone here had same behaviour and a solution
for it.
marko
11:58 a.m.
On 16.01.2012 16:26, Marko Weber wrote:
Hello to the list at first - i am first time here.
i setup on my gentoo box libvirt and virt-manager.
when i fireup virt-manager all seems okay.
when i want to create a new virtual machine it seems all okay,
until the step when i want to add an iso image to the cdrom.
i notcied that i cant choose to connect cdrom, also the network is not
found.
i can post error codes from log when needed,
just wanted to ask, if someone here had same behaviour and a solution
for it.
marko
Hi Marko,
what USE flags is your libvirt compiled with? I personally use:
debug elibc_glibc json libvirtd lxc macvtap nfs nls numa pcap policykit
python qemu sasl udev virt-network
What are the error messages in libvirt log?
Michal
4:04 p.m.
New subject: [libvirt-users] [SPAM] Re: libvirt 0.9.0 on gentoo linux, problem network
Hi Michal,
i cant say the USEFLAGS, cause i removed at end the package,
heres a cut of logfile /var/log/libvirt/libvirt.log
2012-01-15 19:48:11.960+0000: 21586: error : virCommandWait:2192 :
Interner Fehler Child process (/sbin/iptables --table mangle --insert
POSTROUTING --out-interface virbr0 --protocol udp --destination-port 68
--jump CHECKSUM --checksum-fill) status unexpected: exit status 1
2012-01-15 19:48:11.960+0000: 21586: warning :
networkAddGeneralIptablesRules:1259 : Could not add rule to fixup DHCP
response checksums on network 'default'.
2012-01-15 19:48:11.960+0000: 21586: warning :
networkAddGeneralIptablesRules:1260 : May need to update iptables
package & kernel to support CHECKSUM rule.
2012-01-15 19:48:11.977+0000: 21586: error : virCommandWait:2192 :
Interner Fehler Child process (/sbin/iptables --table filter --insert
FORWARD --in-interface virbr0 --jump REJECT) status unexpected: exit
status 1
2012-01-15 19:48:11.977+0000: 21586: error :
networkAddGeneralIptablesRules:1296 : Hinzufügen der iptables-Regel zum
Blockieren von ausgehenden Daten von 'virbr0' fehlgeschlagen
2012-01-15 19:55:06.133+0000: 21589: error :
virConnectNumOfInterfaces:9803 : this function is not supported by the
connection driver: virConnectNumOfInterfaces
2012-01-15 22:11:54.664+0000: 12093: info : libvirt version: 0.9.8
2012-01-15 22:11:54.664+0000: 12093: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
) status unexpected: exit status 1
2012-01-15 22:12:01.356+0000: 12196: info : libvirt version: 0.9.8
2012-01-15 22:12:01.356+0000: 12196: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
) status unexpected: exit status 1
2012-01-15 22:16:28.260+0000: 32646: info : libvirt version: 0.9.8
2012-01-15 22:16:28.260+0000: 32646: error : virCommandWait:2192 :
Interner Fehler Child process (/sbin/iptables --table mangle --insert
POSTROUTING --out-interface virbr0 --protocol udp --destination-port 68
--jump CHECKSUM --checksum-fill) status unexpected: exit status 1
2012-01-15 22:16:28.260+0000: 32646: warning :
networkAddGeneralIptablesRules:1259 : Could not add rule to fixup DHCP
response checksums on network 'default'.
2012-01-15 22:16:28.260+0000: 32646: warning :
networkAddGeneralIptablesRules:1260 : May need to update iptables
package & kernel to support CHECKSUM rule.
2012-01-15 22:16:28.277+0000: 32646: error : virCommandWait:2192 :
Interner Fehler Child process (/sbin/iptables --table filter --insert
FORWARD --in-interface virbr0 --jump REJECT) status unexpected: exit
status 1
2012-01-15 22:16:28.277+0000: 32646: error :
networkAddGeneralIptablesRules:1296 : Hinzufügen der iptables-Regel zum
Blockieren von ausgehenden Daten von 'virbr0' fehlgeschlagen
2012-01-15 22:16:28.392+0000: 32646: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
) status unexpected: exit status 1
2012-01-15 22:21:36.668+0000: 20936: info : libvirt version: 0.9.8
2012-01-15 22:21:36.668+0000: 20936: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
) status unexpected: exit status 1
2012-01-15 22:25:14.718+0000: 8026: info : libvirt version: 0.9.8
2012-01-15 22:25:14.718+0000: 8026: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
) status unexpected: exit status 1
2012-01-15 22:25:16.311+0000: 8018: error : do_open:1213 : no
connection driver available for No connection for URI qemu:///system
2012-01-15 22:25:16.312+0000: 8015: error : virNetSocketReadWire:996 :
End of file while reading data: Eingabe-/Ausgabefehler
2012-01-15 22:25:16.333+0000: 8016: error : do_open:1213 : no
connection driver available for No connection for URI qemu:///system
2012-01-15 22:25:16.333+0000: 8015: error : virNetSocketReadWire:996 :
End of file while reading data: Eingabe-/Ausgabefehler
2012-01-15 22:25:16.508+0000: 8102: info : libvirt version: 0.9.8
2012-01-15 22:25:16.508+0000: 8102: error : virCommandWait:2192 :
Interner Fehler Child process (/bin/sh -c EBT=/sbin/ebtables
cmd='$EBT -t nat -L'
eval res=\$\("${cmd} 2>&1"\)
if [ $? -ne 0 ]; then echo "Failure to execute command '${cmd}' :
'${res}'."; exit 1;fi
I can give a try with your USEFLAGS.
Is the logfile informativ for you?
Marko
Btw, on my Centos6 Boxes all is running like a charme.
Am 16.01.2012 18:58, schrieb Michal Privoznik:
On 16.01.2012 16:26, Marko Weber wrote:
>
> Hello to the list at first - i am first time here.
>
> i setup on my gentoo box libvirt and virt-manager.
> when i fireup virt-manager all seems okay.
> when i want to create a new virtual machine it seems all okay,
> until the step when i want to add an iso image to the cdrom.
> i notcied that i cant choose to connect cdrom, also the network is
> not
> found.
>
> i can post error codes from log when needed,
> just wanted to ask, if someone here had same behaviour and a
> solution
> for it.
>
> marko
Hi Marko,
what USE flags is your libvirt compiled with? I personally use:
debug elibc_glibc json libvirtd lxc macvtap nfs nls numa pcap
policykit
python qemu sasl udev virt-network
What are the error messages in libvirt log?
Michal
4:10 p.m.
New subject: [libvirt-users] [SPAM] Re: libvirt 0.9.0 on gentoo linux, problem network
Hi Michal,
i compiled on gentoo with your useflags,
in virsh i tried net-list and get:
virsh # net-list
Fehler: Auflistung aktiver Netzwerke schlug fehl
Fehler: this function is not supported by the connection driver:
virConnectNumOfNetworks
virsh #
used now this useflags on libvirt
debug elibc_glibc json libvirtd lxc macvtap nfs nls numa pcap policykit
python qemu sasl udev virt-network
marko
Am 16.01.2012 18:58, schrieb Michal Privoznik:
On 16.01.2012 16:26, Marko Weber wrote:
>
> Hello to the list at first - i am first time here.
>
> i setup on my gentoo box libvirt and virt-manager.
> when i fireup virt-manager all seems okay.
> when i want to create a new virtual machine it seems all okay,
> until the step when i want to add an iso image to the cdrom.
> i notcied that i cant choose to connect cdrom, also the network is
> not
> found.
>
> i can post error codes from log when needed,
> just wanted to ask, if someone here had same behaviour and a
> solution
> for it.
>
> marko
Hi Marko,
what USE flags is your libvirt compiled with? I personally use:
debug elibc_glibc json libvirtd lxc macvtap nfs nls numa pcap
policykit
python qemu sasl udev virt-network
What are the error messages in libvirt log?
Michal
4694
days inactive
4694
days old
3 comments
2 participants
participants (2)
-
Marko Weber -
Michal Privoznik