I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works. In my xml i have: <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk> In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn. If anyone has a solution it would be this mailing list Thanks Andreas
Hi Andreas, This might be of some help: https://forums.unraid.net/topic/46887-passthrough-optical-drives/?tab=commen... Unraid also uses KVM ;) /tony On Fri, 2020-04-17 at 07:24 +0200, Andreas Thörn wrote:
I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works.
In my xml i have:
<disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>
In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn.
If anyone has a solution it would be this mailing list
Thanks Andreas
-- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142
I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. Skickat från min iPad
17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>:
Hi Andreas,
This might be of some help:
https://forums.unraid.net/topic/46887-passthrough-optical-drives/?tab=commen...
Unraid also uses KVM ;)
/tony
On Fri, 2020-04-17 at 07:24 +0200, Andreas Thörn wrote: I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works.
In my xml i have:
<disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>
In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn.
If anyone has a solution it would be this mailing list
Thanks Andreas
-- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142
[please don't top post] On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote:
I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs
Note that you don't have to add a scsi <controller> if you already have one. You can add the drive to the existing one.
Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit ..
So there are two addresses for the <hostdev>. The one under <source> should be set to the address of the CDROM drive on the host. It can be obtained e.g. using lsscsi: # lsscsi [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0 (so 'scsi_host3'(adapter) and bus='0' target='0' unit='0') The second address <address type='drive> is the address on the VM's bus. <address type='drive' controller='1' bus='0' target='0' unit='0'/> You set 'controller' to the 'index' attribute of the <controller> you want it to attach to. The 'bus' should be '0'. If you have other devices on the controller, pick an unused 'target' value and 'unit' should be '0'.
Skickat från min iPad
17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>:
Hi Andreas,
This might be of some help:
https://forums.unraid.net/topic/46887-passthrough-optical-drives/?tab=commen...
Unraid also uses KVM ;)
/tony
On Fri, 2020-04-17 at 07:24 +0200, Andreas Thörn wrote: I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works.
In my xml i have:
<disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>
In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn.
If anyone has a solution it would be this mailing list
Thanks Andreas
-- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142
2020-04-17 11:37 skrev Peter Krempa:
[please don't top post]
On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote:
I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs
Note that you don't have to add a scsi <controller> if you already have one. You can add the drive to the existing one.
I don't have a scsi controller in my XML so I added <controller type='scsi' index='1' model='virtio-scsi'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </controller> (0x0) is not in use)
Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit ..
So there are two addresses for the <hostdev>.
The one under <source> should be set to the address of the CDROM drive on the host. It can be obtained e.g. using lsscsi:
# lsscsi [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0
(so 'scsi_host3'(adapter) and bus='0' target='0' unit='0')
The second address <address type='drive> is the address on the VM's bus.
<address type='drive' controller='1' bus='0' target='0' unit='0'/>
You set 'controller' to the 'index' attribute of the <controller> you want it to attach to. The 'bus' should be '0'. If you have other devices on the controller, pick an unused 'target' value and 'unit' should be '0'.
And the following hostdev definition.. <hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host1'/> <address type='scsi' bus='0' target='0' unit='0'/> </source> <readonly/> <address type='drive' controller='1' bus='0' target='0' unit='0'/> </hostdev> #lsscsi [1:0:0:0] cd/dvd ASUS DRW-24D5MT 2.00 /dev/sr0 But windows won't boot .. the boot screen just keep on loading. What I don't understand is why to passthrough as scsi and not SATA
Skickat från min iPad
17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>:
Hi Andreas,
This might be of some help:
https://forums.unraid.net/topic/46887-passthrough-optical-drives/?tab=commen...
Unraid also uses KVM ;)
/tony
On Fri, 2020-04-17 at 07:24 +0200, Andreas Thörn wrote: I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works.
In my xml i have:
<disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>
In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn.
If anyone has a solution it would be this mailing list
Thanks Andreas
-- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142
Does anybody have a solution to my problem below, sorry for the messy thread..
17 apr. 2020 kl. 15:49 skrev mb425018 <andreas.thorn@bahnhof.se>:
2020-04-17 11:37 skrev Peter Krempa:
[please don't top post]
On Fri, Apr 17, 2020 at 10:54:24 +0200, Andreas Thörn wrote: I’ve tried that post .. but either I get a new scsi passthrough controller in device manager, but no dvd or the boot in windows hangs Note that you don't have to add a scsi <controller> if you already have one. You can add the drive to the existing one.
I don't have a scsi controller in my XML so I added
<controller type='scsi' index='1' model='virtio-scsi'> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </controller>
(0x08 is not used in the xml before)
Either that method won’t work anymore or my config is bad .. im not really sure what to put in controller, target, bus and unit .. So there are two addresses for the <hostdev>. The one under <source> should be set to the address of the CDROM drive on the host. It can be obtained e.g. using lsscsi: # lsscsi [2:0:1:0] disk ATA ST3500418AS CC38 /dev/sda [3:0:0:0] cd/dvd HL-DT-ST DVDRAM GH24NSB0 LN00 /dev/sr0 (so 'scsi_host3'(adapter) and bus='0' target='0' unit='0') The second address <address type='drive> is the address on the VM's bus. <address type='drive' controller='1' bus='0' target='0' unit='0'/> You set 'controller' to the 'index' attribute of the <controller> you want it to attach to. The 'bus' should be '0'. If you have other devices on the controller, pick an unused 'target' value and 'unit' should be '0'.
And the following hostdev definition..
<hostdev mode='subsystem' type='scsi'> <source> <adapter name='scsi_host1'/> <address type='scsi' bus='0' target='0' unit='0'/> </source> <readonly/> <address type='drive' controller='1' bus='0' target='0' unit='0'/> </hostdev>
#lsscsi [1:0:0:0] cd/dvd ASUS DRW-24D5MT 2.00 /dev/sr0
But windows won't boot .. the boot screen just keep on loading.
What I don't understand is why to passthrough as scsi and not SATA
Skickat från min iPad
17 apr. 2020 kl. 08:38 skrev Tony Brian Albers <tba@kb.dk>:
Hi Andreas,
This might be of some help:
https://forums.unraid.net/topic/46887-passthrough-optical-drives/?tab=commen...
Unraid also uses KVM ;)
/tony
On Fri, 2020-04-17 at 07:24 +0200, Andreas Thörn wrote: I want to add my dvd and be able to burn dvd’s. I’ve tried every solution I could find, but nothing works.
In my xml i have:
<disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <source dev='/dev/sr0'/> <target dev='sdb' bus='sata'/> <address type='drive' controller='0' bus='0' target='0' unit='0'/> </disk>
In my guest (windows 10) it’s shown as "QEMU QEMU DVD-ROM” .. which of course means I can’t burn.
If anyone has a solution it would be this mailing list
Thanks Andreas
-- Tony Albers - Systems Architect - IT Development Royal Danish Library, Victor Albecks Vej 1, 8000 Aarhus C, Denmark Tel: +45 2566 2383 - CVR/SE: 2898 8842 - EAN: 5798000792142
participants (4)
-
Andreas Thörn -
mb425018
-
Peter Krempa -
Tony Brian Albers