for this host....my nvram setting look like   <os>     <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type>     <loader readonly='yes' type='pflash'>/home/xyz/OVMF.fd</loader>     <nvram template='/usr/share/OVMF/OVMF_VARS.fd'>/var/lib/libvirt/qemu/nvram/X_VARS.fd</nvram>     <boot dev='hd'/>   </os>

Apologies if this has been gone over, but I believe I have checked the intertubes more than a bit..... I am using libvirt and have vms booting under an OVMF.fd to use an efi firmware. I can create vms, linux ubuntu, and they will boot up. However, everytime I reboot am I dropped into the default efi shell provide by the tianocore build. Then I must walk the FS to the booting efi app and run, in this case grubx64.efi, to actually finish booting the host. I had tried adding boot entries with efibootmgr within the OS and also bcfg with the efi shell. I get no errors when adding an entry, and the new entry shows up and I can manipulate the entry i.e. set it to next boot and the like. Soon as I reboot I get dumped back to efi shell. Am I missing something? Are the var changes not being stored? Is there someplace to look for an error perhaps? I also can use the same efi bootloader under libvirt to boot a hybrid iso. location of the efi application on the hybrid iso is /EFI/boot/bootx64.efi. Drops me right into my grub menu, after falling thru from EFI FLOPPY1 and EFI FLOPPY2 to EFI DVD So since that was/is working, tried adding that to my efi partition so it has /EFI/boot/bootx64.efi. The thinking being that since I can't add an entry, I will setup for the "known" efi boot path. Of course that didn't work either I am on arch linux: Linux X 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64 GNU/Linux local/libvirt 1.3.2-3 API for controlling virtualization engines (openvz,kvm,qemu,virtualbox,xen,etc) local/libvirt-python 1.3.1-1 libvirt python binding UEFI: Shell> ver UEFI Interactive Shell v2.1 EDK II UEFI v2.50 (EDK II, 0x00010000) for this host....my nvram setting look like <os> <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> <loader readonly='yes' type='pflash'>/home/xyz/OVMF.fd</loader> <nvram template='/usr/share/OVMF/OVMF_VARS.fd'>/var/lib/libvirt/qemu/nvram/X_VARS.fd</nvram> <boot dev='hd'/> </os>

/your/build/output/OVMF_CODE.fd</loader>

/var/lib/libvirt/qemu/nvram/guest_name_VARS.fd</nvram>

Thanks VERY MUCH for all the info and help! Apologies for the extreme delay. I got distracted by other threads that forced out this work to later date. Also some frustration as well. ;) I completely missed this update. Apologies and thanks Will be diving back into this shortly! On Thu, Mar 24, 2016 at 3:57 PM, Laszlo Ersek <lersek(a)redhat.com&gt; wrote: > On 03/21/16 19:53, jsl6uy js16uy wrote: > > Apologies if this has been gone over, but I believe I have checked the > > intertubes more than a bit..... > > > > I am using libvirt and have vms booting under an OVMF.fd to use an efi > > firmware. I can create vms, linux ubuntu, and they will boot up. > > However, everytime I reboot am I dropped into the default efi shell > > provide by the tianocore build. > > Then I must walk the FS to the booting efi app and run, in this case > > grubx64.efi, to actually finish booting the host. > > I had tried adding boot entries with efibootmgr within the OS and also > > bcfg with the efi shell. I get no errors when adding an entry, and the > > new entry shows up and I can manipulate the entry i.e. set it to next > > boot and the like. Soon as I reboot I get dumped back to efi shell. > > > > Am I missing something? Are the var changes not being stored? Is there > > someplace to look for an error perhaps? > > > > I also can use the same efi bootloader under libvirt to boot a hybrid > > iso. location of the efi application on the hybrid iso is > > /EFI/boot/bootx64.efi. Drops me right into my grub menu, after falling > > thru from EFI FLOPPY1 and EFI FLOPPY2 to EFI DVD > > So since that was/is working, tried adding that to my efi partition so > > it has /EFI/boot/bootx64.efi. The thinking being that since I can't add > > an entry, I will setup for the "known" efi boot path. Of course that > > didn't work either > > > > I am on arch linux: > > > > Linux X 4.4.5-1-ARCH #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016 x86_64 > > GNU/Linux > > local/libvirt 1.3.2-3 > > API for controlling virtualization engines > > (openvz,kvm,qemu,virtualbox,xen,etc) > > local/libvirt-python 1.3.1-1 > > libvirt python binding > > > > UEFI: > > Shell> ver > > UEFI Interactive Shell v2.1 > > EDK II > > UEFI v2.50 (EDK II, 0x00010000) > > > > > > for this host....my nvram setting look like > > <os> > > <type arch='x86_64' machine='pc-i440fx-2.5'>hvm</type> > > <loader readonly='yes' type='pflash'>/home/xyz/OVMF.fd</loader> > > <nvram > > > template='/usr/share/OVMF/OVMF_VARS.fd'>/var/lib/libvirt/qemu/nvram/X_VARS.fd</nvram> > > <boot dev='hd'/> > > </os> > > Your domain XML is wrong. You can use OVMF with libvirt in three setups. > > (1) worst setup: map the unified OVMF.fd file (which includes variable > store and fimrware executable) as ROM. I don't want people to use this, > ever, so although libvirt does support it, I'm not going to share the > XML snippet that implements this. > > (2) a bit less wrong setup (but still pretty wrong): map the unified > OVMF.fd file as writeable pflash. This is bad because (a) you can't > share the unified OVMF.fd file between guests, and (b) whenever you > rebuild the OVMF.fd file, the guest that is pointed to it will lose all > of its persistent variables. > > (3) the right setup: you almost got it right, but the <loader> element > in this setup must not point to the unified OVMF.fd file. It must point > to the executable-only part, the OVMF_CODE.fd file. So here's what you > need: > > <os> > <loader > readonly='yes' > type='pflash' > >/your/build/output/OVMF_CODE.fd</loader> > <nvram > template='/your/build/output/OVMF_VARS.fd' > >/var/lib/libvirt/qemu/nvram/guest_name_VARS.fd</nvram> > </os> > > This allows the firmware binary to be upgraded centrally, while every VM > can keep its private varstore. > > The virt-install(1) manual describes this, under the example > > --boot > > loader=/.../OVMF_CODE.fd,loader_ro=yes,loader_type=pflash,nvram_template=/.../OVMF_VARS.fd > > The way you specified it implies that the varstore range will be mapped > as read-only pflash directly from the unified OVMF.fd file, which > happens to make the varstore non-writeable. In addition, the real > varstore file will be mapped below *that*, which is completely bogus. > > (4) Instead of <boot> elements in the <os> element, <boot order='...'/> > elements are preferred under <disk> and friends. > > (5) You can (and are encouraged to) look at the OVMF log. If you want to > capture it, you should implement the following changes: > > - add the following attribute to the root element of the domain XML: > > <domain > type='kvm' > xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0' <-- this one > > > > - add the following XML fragment near the end of the domain XML, as a > direct child of the <domain> element: > > <qemu:arg value='-global'/> > <qemu:arg value='isa-debugcon.iobase=0x402'/> > <qemu:arg value='-debugcon'/> > <qemu:arg value='file:/tmp/guest_name.log'/> > > This will send the OVMF log to /tmp/guest_name.log. > > (6) If you are already missing a boot option to boot your installed OS, > you might have to reestablish that boot option manually (after the above > changes) -- add the option, and place it first in the boot order. You > can use efibootmgr for this, or the BCFG command, or simply the firmware > TUI. > > I could go into why, but this time I won't. If you are interested, you > can mostly find the reason in the OVMF whitepaper > <http://people.redhat.com/~lersek/ovmf-whitepaper-c770f8c.txt>;, section > "Platform-specific boot policy", bullet (b), "Auto-generation of boot > options". The point is, boot options pointing to arbitrary boot loader > UEFI applications on non-removable media cannot be autogenerated, hence > OVMF cannot filter them in. If you install the guest OS with the correct > domain XML in the first place, then things will work. > > Some UEFI OSes also install "system rescue" utilities to the target > non-removable media, under the default removable media pathname. The > idea is that if you lose your "main" boot option (pointing to an > arbitrary OS boot loader), then the firmware can still auto-generate a > boot option for this fallback utility, and the fallback utility can > restore the OS-specific boot loader's boot option. You can read more > about this at > <https://blog.uncooperative.org/blog/2014/02/06/the-efi-system-partition/ > >. > > Summary: > - use a domain XML like described in (3) and (4) > - when in doubt, capture the OVMF debug log as described in (5) > > Thanks > Laszlo > >