Hello all, I am having issues getting my virtual network to work correctly. As of current, I have set up a virtual network with virt-manager, using the routed mode to forward network traffic. I have found guests can see/ping themselves, the host's virtual IP and the host's real IP, but nothing else. Guests fail to see any other device on the real network or the internet. My host is Arch Linux on Linux 4.2.5-1 with the VFIO kernel, and runs a QEMU/KVM hypervisor. My main guest runs a new install of Windows 10, with the virtio network interface. I have only one virtual network configured, and no network interfaces configured in virt-manager. Does anyone know why my VMs cannot see anything other than themselves and the host? My iptables rules (entirely set by libvirt): Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:domain ACCEPT tcp -- anywhere anywhere tcp dpt:domain ACCEPT udp -- anywhere anywhere udp dpt:bootps ACCEPT tcp -- anywhere anywhere tcp dpt:bootps Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.100.0/24 ACCEPT all -- 192.168.100.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable Chain OUTPUT (policy ACCEPT) target prot opt source destination ACCEPT udp -- anywhere anywhere udp dpt:bootpc Output of "brctl show" bridge name bridge id STP enabled interfaces virbr0 8000.52540012f3ab yes virbr0-nic Output of "ip addr": 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: enp5s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000 link/ether 90:2b:34:68:84:c0 brd ff:ff:ff:ff:ff:ff inet 192.168.1.8/24 brd 192.168.1.255 scope global enp5s0 valid_lft forever preferred_lft forever inet6 fe80::922b:34ff:fe68:84c0/64 scope link valid_lft forever preferred_lft forever 3: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default link/ether 52:54:00:12:f3:ab brd ff:ff:ff:ff:ff:ff inet 192.168.100.1/24 brd 192.168.100.255 scope global virbr0 valid_lft forever preferred_lft forever 4: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc fq_codel master virbr0 state DOWN group default qlen 500 link/ether 52:54:00:12:f3:ab brd ff:ff:ff:ff:ff:ff Many Thanks, Josh