Hi, We try PCI Passthrough of host network devices on PPC platform. http://wiki.libvirt.org/page/Networking#Assignment_with_.3Cinterface_type... But we got a similar issue as below that reported on RedHat before: https://bugzilla.redhat.com/show_bug.cgi?id=1040626 With <hostdev>, it could start VM successfully. <hostdev mode='subsystem' type='pci' managed='yes'> <driver name='vfio'/> <source> <address domain='0x0000' bus='0x01' slot='0x00' function='0x4'/> </source> </hostdev> Logged into VM and checked for VF using lspci root@model : qemu ppce500:~# lspci 00:00.0 PCI bridge: Freescale Semiconductor Inc MPC8533E 00:02.0 Power PC: Freescale Semiconductor Inc Device 0000 (rev 20) 00:03.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon But it will fail if using <interface type="hostdev">: <interface type="hostdev" managed="yes"> <mac address="00:e0:0c:00:20:01"/> <source> <address type="pci" domain="0x0000" bus="0x01" slot="0x00" function="0x4"/> </source> </interface> # virsh create vf.xml 2014-11-24 11:08:31.390+0000: 3556: info : libvirt version: 1.2.2 2014-11-24 11:08:31.390+0000: 3556: debug : virLogParseOutputs:1378 : outputs=1:file:virsh.log error: Failed to create domain from vf.xml error: internal error: missing IFLA_VF_INFO in netlink response Exactly We're using max_vfs=2 and libnl-3.2.22 # ls -l /usr/lib64/libnl-3.so.200.17.0 -rwxr-xr-x 1 root root 154440 Sep 17 07:15 /usr/lib64/libnl-3.so.200.17.0 Why this issue happened on PPC? Is there anything architecture-specific support needed to add? Thanks, Olivia