[libvirt-users] Passing a USB hub

Hi, I'm trying to assign a complete USB Hub to my Windows 10 guest, using libvirt 1.3. Following the documentation, I tried adding the following to the definition of my guest: ... <devices> ..    <hub type='usb'>       <address type='usb' bus='1' port='10.2'/>     </hub> .. </devices> To get the correct port, I used lsusb: [root@nobill-main 004]# lsusb -t /:  Bus 04.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 5000M /:  Bus 03.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/2p, 480M /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 5000M /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/16p, 480M     |__ Port 5: Dev 110, If 0, Class=Hub, Driver=hub/4p, 480M         |__ Port 1: Dev 52, If 0, Class=Hub, Driver=hub/4p, 480M             |__ Port 1: Dev 53, If 0, Class=Human Interface Device, Driver=usbhid, 12M             |__ Port 1: Dev 53, If 1, Class=Human Interface Device, Driver=usbhid, 12M             |__ Port 3: Dev 54, If 0, Class=Human Interface Device, Driver=usbhid, 12M             |__ Port 3: Dev 54, If 1, Class=Human Interface Device, Driver=usbhid, 12M             |__ Port 3: Dev 54, If 2, Class=Human Interface Device, Driver=usbhid, 12M             |__ Port 4: Dev 55, If 1, Class=Human Interface Device, Driver=usbhid, 12M     |__ Port 10: Dev 117, If 0, Class=Hub, Driver=hub/4p, 480M         |__ Port 2: Dev 118, If 0, Class=Hub, Driver=hub/4p, 480M     |__ Port 11: Dev 8, If 0, Class=Human Interface Device, Driver=usbhid, 1.5M     |__ Port 11: Dev 8, If 1, Class=Human Interface Device, Driver=usbhid, 1.5M (I want to assign port 10 in bus 1, the one that (still) has nothing attached to it. I can save it correctly, but after doing so, the guest wont start, complaining it can't find bus with index 1. After playing with lots of different configurations, my conclusions are:   - Any other bus different than 0, will make virt-manager instantly complain that it cant find the bus (weird, since bus 0 doesn't exist according to lsusb)   - Some ports allow the guest to start, but I won't be able to see the hub on windows.   - Some other ports make virt-manager complain that it can't find anything attached there. Has anyone managed to get this working? Thanks, Rubén