re: assigning VM to a VLAN on a trunk bridge that exists on LACP bond - how to

I was able to achieve what I wanted to do by the /etc/network/interfaces file posted below on the host. KVM/QEMU does not accept the bridge notation with dots in it, such as bridge0.20. Instead, one needs to create a separate vlan definition and a bridge on top of that vlan. This would create an access port for the VMs that use that bridge. What I was trying to do was to create a trunk port on a bridge, and by the static IP chosen for VMs, let each VM claim their VLANs. In this working version, the access ports claim the VLAN that the VM would belong to instead. I hope that this would help people avoid the suffering I endured during the last week to achieve this, lol! [code] auto lo iface lo inet loopback # bond interface auto bond0 iface bond0 inet manual bond-slaves enp5s0 enp6s0 bond-mode 802.3ad bond-xmit-hash-policy layer2+3 bond-miimon 100 bond-lacp-rate 1 # vlan 20 auto vlan20 iface vlan20 inet manual vlan-id 20 vlan-raw-device bridge0 auto bridge20 iface bridge20 inet manual bridge-ports vlan20 # bridge interface auto bridge0 iface bridge0 inet manual bridge-ports bond0 bridge_stp on bridge_fd 2 bridge_maxwait 0 bridge-vlan-aware yes bridge-vids 1-500 auto bridge0.1 iface bridge0.1 inet static address 192.168.1.130/24 gateway 192.168.1.1 [/code]