[libvirt-users] Can I set up VMs in a "Flat" network?
Our small network is 10.10.11.0/24, gateway 10.10.11.252. dhcp is set up.
I'm using virt-manager to install VM's with kvm-qemu on an F14 host -
10.10.11.100.
qemu-kvm-0.13.0-0.6.rc1.fc14.x86_64
libvirt-0.8.3-2.fc14.x86_64
I'd like all the VM's to be on the same network as the physical
machines with an address range of 10.10.11.110-10.10.11.130.
I have virt-net set up. ifconfig on the host:
br0 Link encap:Ethernet HWaddr 00:30:67:6A:2C:5E
inet addr:10.10.11.100 Bcast:10.10.11.255 Mask:255.255.255.0
inet6 addr: fe80::230:67ff:fe6a:2c5e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2792310 errors:0 dropped:0 overruns:0 frame:0
TX packets:4310569 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:571898900 (545.4 MiB) TX bytes:5394989297 (5.0 GiB)
eth0 Link encap:Ethernet HWaddr 00:30:67:6A:2C:5E
inet6 addr: fe80::230:67ff:fe6a:2c5e/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:2908711 errors:0 dropped:0 overruns:0 frame:0
TX packets:4462246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:629708224 (600.5 MiB) TX bytes:5402914301 (5.0 GiB)
Interrupt:44 Base address:0xe000
lo .........................
virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:219830 errors:0 dropped:0 overruns:0 frame:0
TX packets:640662 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:142081963 (135.4 MiB) TX bytes:777889995 (741.8 MiB)
On virt-manager I've tried a "Routed" network, but that doesn't work:
libvirtError: internal error Network 10.10.11.1/255.255.255.0 is
already in use by interface br0
Can this be done? How?
sean