Hello! I have upgraded all libvirt packages to version 3.5.0-655.1 and restarted host. This is the current default network config: ld4004:~ # virsh net-dumpxml default <network connections='1'> <name>default</name> <uuid>f511d113-d7d1-4714-ad2b-be29ef8f7fc4</uuid> <forward dev='br0' mode='nat'> <nat> <port start='1024' end='65535'/> </nat> <interface dev='br0'/> </forward> <bridge name='virbr0' stp='on' delay='0'/> <mac address='52:54:00:f5:5f:ca'/> <domain name='local.net' localOnly='yes'/> <ip address='192.168.100.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.100.10' end='192.168.100.254'/> </dhcp> </ip> </network> What do I need to configure in order to have NSS working? THX 18. Juli 2017 14:13, "Michal Privoznik" <mprivozn@redhat.com> schrieb:
On 07/17/2017 04:17 PM, c.monty@web.de wrote:
Hello!
I want to SSH from host to specific guest using hostname, e.g. ssh <user>@<guest> or ssh test@vm02-fai
ssh to guest using IP works w/o issues.
I found Wiki article for "NSS module" (http://wiki.libvirt.org/page/NSS_module),
Also, until 3.2.0 it was mandatory to restart the virtual network after configuring the libvirt_guest module (I've updated the wiki accordingly).
but there are no results for the following commands: ld4004:/home # virsh net-dhcp-leases default Expiry Time MAC address Protocol IP address Hostname Client ID or DUID ---------------------------------------------------------------------------------------------------- --------------
This is the problem. Libvirt is not the one who's assigning IP addresses and thus the NSS module doesn't work.
ld4004:/home # virsh domifaddr --source lease vm02-fai Name MAC address Protocol Address -------------------------------------------------------------------------------
ld4004:/home # virsh list Id Name State ---------------------------------------------------- 1 vm02-fai running
dnsmasq is running: ld4004:/home # netstat -nulpd | grep dnsmasq udp 0 0 192.168.33.1:53 0.0.0.0:* 10318/dnsmasq udp 0 0 192.168.100.1:53 0.0.0.0:* 20145/dnsmasq udp 0 0 0.0.0.0:67 0.0.0.0:* 20145/dnsmasq
How can I fix this issue?
By having libvirt network assign IP addresses. Generally, <interface type='network'/> is what you should look for.
Michal