1:54 p.m.
Good morning,
there is a typo in my description;
the line
<address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
should be
<address domain='0x0' bus='0x2' slot='0x00'
function='0x0'/>
That was correct in my xml-file.
Isn't there anybody how can help me with that?
Regards
Michael Weis
Von: Weis, Michael (DWIE)
Gesendet: Dienstag, 7. Oktober 2014 11:45
An: 'libvirt-users(a)redhat.com'
Betreff: passthrough of PCI-device
Hello,
I try to passthrough a PCI-card to a VM named testvm
I want to do that with an xml-file named hga.xml including the following content:
<hostdev mode='subsystem' type='pci' managed='yes'>
<source>
<address domain='0x0' bus='0x1' slot='0x00'
function='0x0'/>
</source>
</hostdev>
When I execute
virsh attach-device testvm hga.xml
I get the following error:
Fehler: Fehler beim Anhängen des Geräts von hga.xml
(error: error while attaching device from hga.xml)
Fehler: Interner Fehler: Kann Qemu-Befehl 'device_add' nicht ausführen: Device
initialization failed.
(error: internal error: cannot execute 'device_add':
In the syslog of the host I get the following errors:
Oct 7 11:32:34 artemis2 journal: Interner Fehler: Kann Qemu-Befehl 'device_add'
nicht ausführen: Device initialization failed.
Oct 7 11:32:53 artemis2 kernel: ffff880220fadd10 ffffffff810f924a ffff880220fadd28
0000000000000246
Oct 7 11:32:53 artemis2 kernel: ffff8800bd07a400 000000007265756d ffffffffa0866ee0
0000000000000000
Oct 7 11:32:53 artemis2 kernel: Call Trace:
Oct 7 11:32:53 artemis2 kernel: [<ffffffff815e237b>] dump_stack+0x19/0x1b
Oct 7 11:32:53 artemis2 kernel: [<ffffffff810f924a>] __setup_irq+0x54a/0x570
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa0866ee0>] ? virqfd_wakeup+0xc0/0xc0
[vfio_pci]
Oct 7 11:32:53 artemis2 kernel: [<ffffffff810f93cc>]
request_threaded_irq+0xcc/0x170
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa0866b8a>]
vfio_intx_set_signal+0x10a/0x1f0 [vfio_pci]
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa08670e8>]
vfio_pci_set_intx_trigger+0xc8/0x1b0 [vfio_pci]
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa086799b>]
vfio_pci_set_irqs_ioctl+0x7b/0x100 [vfio_pci]
Oct 7 11:32:53 artemis2 kernel: [<ffffffff8115d352>] ? memdup_user+0x42/0x70
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa0865e74>] vfio_pci_ioctl+0x314/0xa00
[vfio_pci]
Oct 7 11:32:53 artemis2 kernel: [<ffffffff81194b6a>] ?
kmem_cache_alloc+0x1ba/0x1d0
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811b156c>] ? get_empty_filp+0x5c/0x190
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811f1891>] ? fsnotify+0x251/0x350
Oct 7 11:32:53 artemis2 kernel: [<ffffffff81251806>] ?
security_file_alloc+0x16/0x20
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811b15a0>] ? get_empty_filp+0x90/0x190
Oct 7 11:32:53 artemis2 kernel: [<ffffffffa084f163>]
vfio_device_fops_unl_ioctl+0x23/0x30 [vfio]
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811c2af5>] do_vfs_ioctl+0x2e5/0x4c0
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811af780>] ? vfs_write+0x160/0x1e0
Oct 7 11:32:53 artemis2 kernel: [<ffffffff811c2d71>] SyS_ioctl+0xa1/0xc0
Oct 7 11:32:53 artemis2 kernel: [<ffffffff815f2a59>]
system_call_fastpath+0x16/0x1b
Oct 7 11:32:53 artemis2 journal: Interner Fehler: Kann Qemu-Befehl 'device_add'
nicht ausführen: Device initialization failed.
My version-information:
OS: CentOS Linux release 7.0.1406 (Core)
Kernel: Linux artemis2 3.10.0-123.8.1.el7.x86_64
libvirt-daemon-driver-secret-1.2.8-1.el7.centos.x86_64
libvirt-1.2.8-1.el7.centos.x86_64
libvirt-daemon-kvm-1.2.8-1.el7.centos.x86_64
libvirt-client-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-qemu-1.2.8-1.el7.centos.x86_64
libvirt-daemon-config-network-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-interface-1.2.8-1.el7.centos.x86_64
libvirt-daemon-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-nodedev-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-storage-1.2.8-1.el7.centos.x86_64
libvirt-daemon-config-nwfilter-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-network-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-lxc-1.2.8-1.el7.centos.x86_64
libvirt-daemon-driver-nwfilter-1.2.8-1.el7.centos.x86_64
The PCI-Card I want to passthrough:
02:00.0 Ethernet controller: PLX Technology, Inc. Device 235e
Subsystem: PLX Technology, Inc. Device 235e
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0810000 (32-bit, non-prefetchable) [disabled] [size=256]
Region 1: I/O ports at e000 [disabled] [size=256]
Region 2: Memory at e0000000 (32-bit, non-prefetchable) [disabled] [size=256M]
Region 3: Memory at f0000000 (32-bit, non-prefetchable) [disabled] [size=8M]
Expansion ROM at f0800000 [disabled] [size=64K]
Capabilities: [40] Power Management version 1
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [48] CompactPCI hot-swap <?>
Capabilities: [4c] Vital Product Data
Unknown large resource type 35, will not decode more.
Kernel driver in use: vfio-pci
Please help.
Best regards
Michael Weis
PROPRIETARY: This e-mail contains proprietary information some or all of which may be
legally privileged. It is intended for the recipient only. If an addressing or
transmission error has misdirected this e-mail, please notify the authority by replying to
this e-mail. If you are not the intended recipient you must not use, disclose,
distribute, copy, print, or rely on this e-mail.