10:42 a.m.
Laine wrote:
-----Original Message-----
From: sendmail [mailto:justsendmailnothingelse@gmail.com] On Behalf
Of Laine Stump
Sent: Monday, March 16, 2015 4:12 PM
To: libvirt-users(a)redhat.com
Cc: Lentes, Bernd
Subject: Re: [libvirt-users] still possible to use traditional bridge network
setup ?
On 03/16/2015 10:08 AM, Lentes, Bernd wrote:
> Hi,
>
> i'm currently installing a SLES 12 64bit system. libvirt-client-1.2.5-
13.3.x86_64 and libvirt-daemon-1.2.5-13.3.x86_64.
> Formerly I created my vm's (KVM) using a traditional bridge in my host
systems, mostly SLES 11 SP3.
> But with SLES 12 I don't succeed. I can use the macvtap device in the
host, but I like to be able to communicate between host and guest.
> Is the traditional bridge setup not any longer available ?
Nothing has been removed in libvirt. Traditional bridges work just fine.
What failure did you see?
Hi Laine,
thank you for your answer. Well, it simply does not work:
this is my setup:
pc63422:/etc/sysconfig/network # cat ifcfg-br0
BOOTPROTO='dhcp4'
TYPE='Bridge'
BRIDGE='yes'
DEVICE='br0'
BRIDGE_FORWARDDELAY='0'
BRIDGE_PORTS='eth0'
BRIDGE_STP='off'
BROADCAST=''
DHCLIENT_SET_DEFAULT_ROUTE='yes'
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
USERCONTROL='no
pc63422:/etc/sysconfig/network # cat ifcfg-eth0
# BOOTPROTO='dhcp'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR=''
MTU=''
NAME=''
NETMASK=''
NETWORK=''
REMOTE_IPADDR=''
STARTMODE='auto'
DHCLIENT_SET_DEFAULT_ROUTE='yes'
PREFIXLEN=''
BOOTPROTO='static'
USERCONTROL='no'
BRIDGE='br0'
guest.xml:
...
<interface type='bridge'>
<mac address='52:54:00:37:92:b1'/>
<source bridge='br0'/>
<model type='rtl8139'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03' function='0x0'/>
</interface>
...
pc63422:/etc/sysconfig/network # ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UP group default qlen 1000
link/ether 78:24:af:9c:bd:a6 brd ff:ff:ff:ff:ff:ff
inet6 fe80::7a24:afff:fe9c:bda6/64 scope link
valid_lft forever preferred_lft forever
27: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group
default
link/ether 78:24:af:9c:bd:a6 brd ff:ff:ff:ff:ff:ff
inet 10.35.34.115/24 brd 10.35.34.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::7a24:afff:fe9c:bda6/64 scope link
valid_lft forever preferred_lft forever
28: vnet0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master br0
state UNKNOWN group default qlen 500
link/ether fe:54:00:37:92:b1 brd ff:ff:ff:ff:ff:ff
inet6 fe80::fc54:ff:fe37:92b1/64 scope link
valid_lft forever preferred_lft forever
Attached is what I choose during creation of the vm. It's german, network source means
something like "name of the shared device".
I attached the host to a network hub to be able to sniff all packets. But I don't see
any packet from the guest. E.g. I choosed "dhclient" after booting a knoppix cd
in the guest, but no packet from the guest. Also using a windows 7 installation cd - no
packet from the guest. But I see packets from the host.
Bernd
Helmholtz Zentrum München
Deutsches Forschungszentrum für Gesundheit und Umwelt (GmbH)
Ingolstädter Landstr. 1
85764 Neuherberg
www.helmholtz-muenchen.de
Aufsichtsratsvorsitzende: MinDir´in Bärbel Brumme-Bothe
Geschäftsführer: Prof. Dr. Günther Wess, Dr. Nikolaus Blum, Dr. Alfons Enhsen
Registergericht: Amtsgericht München HRB 6466
USt-IdNr: DE 129521671
