[libvirt-users] KVM bridge wonkiness in Fedora19
Greetings,
I'm attempting to get several virtual machines setup on a Fedora19
host system, with the traditional bridge network devices (br0, br1,
etc). I've done this many times before with older versions of Fedora
(16, 14, etc), and it just works. However, for reasons that I cannot
figure out, the bridge doesn't seem to be working in Fedora19. While
I can successfully connect to the outside world (local network +
internet) from inside a VM, nothing can communicate with the VM from
outside (local network). I'm referring to something as trivial as
pinging. From inside the VM, I can ping anything successfully (0%
packet loss). However, from outside the VM (on the host, or any other
system on the same network), I see 100% packet loss when pinging the
IP address of the VM.
My first question is simply, does anyone else have this working
successfully in F19? And if so, what steps did you need to follow?
I'm not using NetworkManager at all, its all the network service.
There are no firewalls involved anywhere (iptables & firewall services
are currently disabled). Here's the current host configuration:
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.38eaa792efe5 no em2
vnet1
br1 8000.38eaa792efe6 no em3
br2 8000.38eaa792efe7 no em4
vnet0
virbr0 8000.525400db3ebf yes virbr0-nic
# more /etc/sysconfig/network-scripts/ifcfg-em2
TYPE=Ethernet
BRIDGE="br0"
NAME=em2
DEVICE="em2"
UUID=aeaa839e-c89c-4d6e-9daa-79b6a1b919bd
ONBOOT=yes
HWADDR=38:EA:A7:92:EF:E5
NM_CONTROLLED="no"
# more /etc/sysconfig/network-scripts/ifcfg-br0
TYPE=Bridge
NM_CONTROLLED="no"
BOOTPROTO=dhcp
NAME=br0
DEVICE="br0"
ONBOOT=yes
# ifconfig em2 ;ifconfig br0
em2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link>
ether 38:ea:a7:92:ef:e5 txqueuelen 1000 (Ethernet)
RX packets 100093 bytes 52354831 (49.9 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 25321 bytes 15791341 (15.0 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device memory 0xf7d00000-f7e00000
br0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 10.31.99.226 netmask 255.255.252.0 broadcast 10.31.99.255
inet6 fe80::3aea:a7ff:fe92:efe5 prefixlen 64 scopeid 0x20<link>
ether 38:ea:a7:92:ef:e5 txqueuelen 0 (Ethernet)
RX packets 19619 bytes 1963328 (1.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 11 bytes 1074 (1.0 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Relevant section from /etc/libvirt/qemu/foo.xml (one of the VMs with
this problem):
<interface type='bridge'>
<mac address='52:54:00:26:22:9d'/>
<source bridge='br0'/>
<model type='virtio'/>
<address type='pci' domain='0x0000' bus='0x00'
slot='0x03'
function='0x0'/>
</interface>
I can provide additional information, if requested. thanks!