
18. Juli 2017 16:45, "Michal Privoznik" <mprivozn@redhat.com> schrieb:
On 07/18/2017 04:31 PM, c.monty@web.de wrote:
Hello!
I have upgraded all libvirt packages to version 3.5.0-655.1 and restarted host.
That wasn't necessary. It's not Windows ;-)
This is the current default network config: ld4004:~ # virsh net-dumpxml default <network connections='1'> <name>default</name> <uuid>f511d113-d7d1-4714-ad2b-be29ef8f7fc4</uuid> <forward dev='br0' mode='nat'> <nat> <port start='1024' end='65535'/> </nat> <interface dev='br0'/> </forward> <bridge name='virbr0' stp='on' delay='0'/> <mac address='52:54:00:f5:5f:ca'/> <domain name='local.net' localOnly='yes'/> <ip address='192.168.100.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.100.10' end='192.168.100.254'/> </dhcp> </ip> </network>
This is looking good.
What do I need to configure in order to have NSS working?
What's the domain's <interface/> type? It should look something like this:
<interface type='network'> <source network='default'/> ... </interface>
And with this you should be all set.
Michal
OK, all libvirt software packages are updated. And this is the configuration /etc/nsswitch.conf ld4004:~ # cat /etc/nsswitch.conf # # /etc/nsswitch.conf # passwd: compat group: compat hosts: files libvirt dns networks: files dns services: files protocols: files rpc: files ethers: files netmasks: files netgroup: files nis publickey: files bootparams: files automount: files nis aliases: files And this is the domain's interface type / configuration: <interface type='network'> <mac address='52:54:00:31:dd:59'/> <source network='default'/> <model type='rtl8139'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </interface> <interface type='network'> <mac address='52:54:00:5d:1e:dc'/> <source network='internal'/> <model type='rtl8139'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x08' function='0x0'/> </interface> However, there's still no record of the domain's IP address: ld4004:~ # virsh domifaddr --source lease vm02-fai Name MAC address Protocol Address ------------------------------------------------------------------------------- Could this issue be related to the domain's NIC configuration, means model type='rtl8139' or the fact that 2 NICs are configured? For your information, it fails also with model type='virtio'. Regards