host and vm on isolated network, there is ip (via dhcp) but not ping
Greetings,
I've setup an vm with openwrt in it, defined a isolated lan between the vm and the
host and booted the vm up.
I see the vm is up, made sure the vnic is visible in both the host and guest and added it
to the br in the guest.
I've issued an dhcpd call on the vnic (labeled vnic0) in the host and got an ip, see:
dagg@NCC-5001D ~ $ dhcpcd vnet0
DUID 00:01:00:01:23:dd:d8:5b:e0:d5:5e:d9:f2:e2
vnet0: IAID 00:10:20:bf
vnet0: rebinding lease of 192.168.1.130
vnet0: probing address 192.168.1.130/24
vnet0: soliciting an IPv6 router
vnet0: leased 192.168.1.130 for 43200 seconds
vnet0: adding route to 192.168.1.0/24
vnet0: adding default route via 192.168.1.1
forked to background, child pid 26279
dagg@NCC-5001D ~ $ ifconfig
virtsw0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
ether 52:54:00:3e:3f:88 txqueuelen 1000 (Ethernet)
RX packets 123098 bytes 16327962 (15.5 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 6 bytes 252 (252.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
vnet0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.130 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::fc54:ff:fe10:20bf prefixlen 64 scopeid 0x20<link>
ether fe:54:00:10:20:bf txqueuelen 1000 (Ethernet)
RX packets 45 bytes 8002 (7.8 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 39 bytes 2676 (2.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
dagg@NCC-5001D ~ $ ping 192.168.1.1
PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data.
^C
--- 192.168.1.1 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1018ms
the vm's xml can be found at https://pastebin.com/1gXBGcPb
virtsw0 is defined as follows:
<network connections='1'>
<name>virtsw0</name>
<uuid>c8eb15a3-cc5c-4bd6-8f3b-5790792ddccc</uuid>
<bridge name='virtsw0' stp='on' delay='0'/>
<mac address='52:54:00:3e:3f:88'/>
</network>
the os is gentoo, the versions are libvirt-6.2.0 qemu-5.0.0.
I have another server running debian 10 with the same virtsw0 definition, there the
connection is working.
/var/lib/libvirt/dnsmasq/virtsw0.macs has only [] in it, can that be the issue?
Thanks,
Dagg.