On 15 Feb 2022, at 20:04, Peter Crowther <
peter.crowther@melandra.com> wrote:
And eno1 and eno2 are *both* connected to the same external switch, yes?
Correct, where each NIC has its ip access-list.
XX1.XX1.XX1.150 and XX2.XX2.XX2.100 are on separate NICs.
When I ping the VM, XX2.XX2.XX2.100, from the host, XX1.XX1.XX1.150, the host pings itself.
Thanks!
Wolf
Hi!
1) I have two network ports on my server.
- eno1 has the IP: XX1.XX1.XX1.150
- bridge0 has the IP: XX2.XX2.XX2.100
and has the interface member: port eno2.
eno2 is not set up with an IP address.
2) The host runs on IP: XX1.XX1.XX1.150
3) A VM uses the bridge: bridge0, and has the IP: XX2.XX2.XX2.100
I have a problem with this setup:
I can ssh the VM on XX2.XX2.XX2.100 from outside, but from the host, XX1.XX1.XX1.150, I can't ssh the VM on XX2.XX2.XX2.100.
Have I set up this wrong or is it something I can do to solve this?
Thanks!
Wolf